软件包列表
软件包分类
点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。
软件包列表
为了不影响您的体验,每页只显示50个软件包。
- 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
- 点击表头可对按对应字段对内容进行排序。
- 在
反白框输入您的筛选条件。
当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。
Filtered by categories='network'
| 类别 | 名称 | 版本 | 依赖包 | ↓ 描述信息 | 软件包体积 | 安装后大小 | 授权方式 | 维护人 | 报告错误 | 源代码 |
|---|---|---|---|---|---|---|---|---|---|---|
| network | fakeidentd | 2.6-1 | libc, libssp | A static secure identd, only one source file. | 4kB | 4kB | GPL-2.0+ | Daniel Gimpelevich | Bug reports | Sources |
| network | fakeidentd | 2.6-2 | libc | A static secure identd, only one source file. | 5kB | 4kB | GPL-2.0-or-later | Daniel Gimpelevich | Bug reports | Sources |
| network | fakeidentd | 2.6-1 | libc | A static secure identd, only one source file. | 5kB | 4kB | GPL-2.0+ | Daniel Gimpelevich | Bug reports | Sources |
| network | fakeidentd | 2.6-2 | libc | A static secure identd, only one source file. | 5kB | 4kB | GPL-2.0-or-later | Daniel Gimpelevich | Bug reports | Sources |
| network | fakeidentd | 2.6-2 | libc, librt, libpthread | A static secure identd, only one source file. | 5kB | 5kB | GPL-2.0-or-later | Daniel Gimpelevich | Bug reports | Sources |
| network | fakeidentd | 2.6-2 | libc | packages:pkgdata:fakeidentd, A static secure identd, only one source file. | 5kB | 4kB | GPL-2.0-or-later | Daniel Gimpelevich | packages:pkgdata:fakeidentd, Bug reports | packages:pkgdata:fakeidentd, Sources |
| network | mini_snmpd | 1.4-rc1-2 | libc, jsonfilter, ubus, procd, ubox | A tiny SNMP server for embedded systems | 21kB | 21kB | GPL-2.0 | Luke McKee | Bug reports | Sources |
| network | mini_snmpd | 1.6-3 | libc, jsonfilter, ubus, procd, ubox | A tiny SNMP server for embedded systems | 26kB | 25kB | GPL-2.0 | Marcin Jurkowski | Bug reports | Sources |
| network | mini_snmpd | 1.4-rc1-3 | libc, jsonfilter, ubus, procd, ubox | A tiny SNMP server for embedded systems | 21kB | 20kB | GPL-2.0 | Marcin Jurkowski | Bug reports | Sources |
| network | mini_snmpd | 1.4-rc1-4 | libc, libssp, jsonfilter, ubus, procd, ubox | A tiny SNMP server for embedded systems | 20kB | 19kB | GPL-2.0 | Marcin Jurkowski | Bug reports | Sources |
| network | mini_snmpd | 1.6-2 | libc, librt, libpthread, jsonfilter, ubus, procd, ubox | A tiny SNMP server for embedded systems | 21kB | 20kB | GPL-2.0 | Marcin Jurkowski | Bug reports | Sources |
| network | bpftool-minimal | 2022-03-08-04c465fd-1 | libc, libelf1 | A tool for inspection and simple manipulation of eBPF programs and maps. | 159kB | 158kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | bpftool-minimal | 5.10.10-2 | libc, libelf1 | A tool for inspection and simple manipulation of eBPF programs and maps. | 117kB | 117kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | bpftool-minimal | 2022-03-08-04c465fd-1 | libc, libelf1 | packages:pkgdata:bpftool-minimal, A tool for inspection and simple manipulation of eBPF programs and maps. | 159kB | 158kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | packages:pkgdata:bpftool-minimal, Bug reports | packages:pkgdata:bpftool-minimal, Sources |
| network | bpftool-full | 2022-03-08-04c465fd-1 | libc, librt, libpthread, libelf1, libbfd, libopcodes | A tool for inspection and simple manipulation of eBPF programs and maps. This full version uses libbfd and libopcodes to support disassembly of eBPF programs and jited code. | 132kB | 131kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | bpftool-full | 5.10.10-2 | libc, librt, libpthread, libelf1, libbfd, libopcodes | A tool for inspection and simple manipulation of eBPF programs and maps. This full version uses libbfd and libopcodes to support disassembly of eBPF programs and jited code. | 100kB | 100kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | bpftool-full | 2022-03-08-04c465fd-1 | libc, librt, libpthread, libelf1, libbfd, libopcodes | packages:pkgdata:bpftool-full, A tool for inspection and simple manipulation of eBPF programs and maps. This full version uses libbfd and libopcodes to support disassembly of eBPF programs and jited code. | 132kB | 131kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | packages:pkgdata:bpftool-full, Bug reports | packages:pkgdata:bpftool-full, Sources |
| network | travelmate | 1.0.2-1 | libc, libssp, iwinfo, jshn, jsonfilter | A wlan connection manager for travel router. Please see https://github.com/openwrt/packages/blob/master/net/travelmate/files/README.md for further information. | 4kB | 3kB | GPL-3.0+ | Dirk Brenken | Bug reports | Sources |
| network | travelmate | 2.1.0-1 | libc, iwinfo, jshn, jsonfilter, curl, ca-bundle | A wlan connection manager for travel router. Please see https://github.com/openwrt/packages/blob/master/net/travelmate/files/README.md for further information. | 16kB | 15kB | GPL-3.0-or-later | Dirk Brenken | Bug reports | Sources |
| network | travelmate | 1.2.2-1 | libc, iwinfo, jshn, jsonfilter, uclient-fetch | A wlan connection manager for travel router. Please see https://github.com/openwrt/packages/blob/master/net/travelmate/files/README.md for further information. | 5kB | 4kB | GPL-3.0+ | Dirk Brenken | Bug reports | Sources |
| network | travelmate | 1.5.5-3 | libc, iwinfo, jshn, jsonfilter, uclient-fetch, dnsmasq | A wlan connection manager for travel router. Please see https://github.com/openwrt/packages/blob/master/net/travelmate/files/README.md for further information. | 8kB | 8kB | GPL-3.0-or-later | Dirk Brenken | Bug reports | Sources |
| network | travelmate | 2.0.7-3 | libc, iwinfo, jshn, jsonfilter, curl, ca-bundle | A wlan connection manager for travel router. Please see https://github.com/openwrt/packages/blob/master/net/travelmate/files/README.md for further information. | 14kB | 13kB | GPL-3.0-or-later | Dirk Brenken | Bug reports | Sources |
| network | arp-scan | 1.9-40-g69b2f70-1 | libc, libssp, libpcap | ARP scanner | 21kB | 20kB | GPL-3.0 | Sergey Urushkin | Bug reports | Sources |
| network | arp-scan | 1.9-40-g69b2f70-1 | libc, libpcap | ARP scanner | 23kB | 22kB | GPL-3.0 | Sergey Urushkin | Bug reports | Sources |
| network | arp-scan | 1.9.5-1 | libc, libpcap1 | ARP scanner | 21kB | 21kB | GPL-3.0 | Sergey Urushkin | Bug reports | Sources |
| network | uradvd | 2021-09-14-9b0da60e-2 | libc | Advertise an IPv6 prefix/route via SLAAC. | 7kB | 6kB | BSD-2-Clause | Moritz Warning | Bug reports | Sources |
| network | ahcpd | 0.53-2 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 21kB | 21kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | ahcpd | 0.53-3 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 23kB | 22kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | ahcpd | 0.53-2 | libc, libssp, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 19kB | 18kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | ahcpd | 0.53-2 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 21kB | 20kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | ahcpd | 0.53-3 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 23kB | 22kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | ahcpd | 0.53-3 | libc, ip, librt | packages:pkgdata:ahcpd, Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 23kB | 22kB | MIT | Gabriel Kerneis | packages:pkgdata:ahcpd, Bug reports | packages:pkgdata:ahcpd, Sources |
| network | apinger | 0.6.1-c7da72f7ec26eed..94e | libc, libssp | Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. | 24kB | 23kB | GPL-2.0 | Alex Samorukov | Bug reports | Sources |
| network | apinger | 2015-04-09-78eb3287-3 | libc | Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. | 31kB | 30kB | GPL-2.0-only | Alex Samorukov | Bug reports | Sources |
| network | apinger | 2015-04-09-78eb3287-3 | libc | packages:pkgdata:apinger, Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. | 31kB | 30kB | GPL-2.0-only | Alex Samorukov | packages:pkgdata:apinger, Bug reports | packages:pkgdata:apinger, Sources |
| network | apinger | 2015-04-09-78eb3287-1 | libc | Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. | 26kB | 25kB | GPL-2.0-only | Alex Samorukov | Bug reports | Sources |
| network | apinger | 2015-04-09-78eb3287-1 | libc | Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. | 26kB | 25kB | GPL-2.0-only | Alex Samorukov | Bug reports | Sources |
| network | apinger | 2015-04-09-78eb3287-2 | libc, librt, libpthread | Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. | 26kB | 25kB | GPL-2.0-only | Alex Samorukov | Bug reports | Sources |
| network | static-neighbor-reports | 1-2 | libc, libuci-lua, libubus-lua, lua | Allows to configure static neighbor reports for hostapd interfaces. These neighbor reports are avilable to clients using IEEE 802.11k. | 1kB | 0kB | GPL-2.0-only | David Bauer | Bug reports | Sources |
| network | static-neighbor-reports | 1-2 | libc, librt, libpthread, libuci-lua, libubus-lua, lua | Allows to configure static neighbor reports for hostapd interfaces. These neighbor reports are avilable to clients using IEEE 802.11k. | 1kB | 0kB | GPL-2.0-only | David Bauer | Bug reports | Sources |
| network | static-neighbor-reports | 1-2 | libc, libuci-lua, libubus-lua, lua | packages:pkgdata:static-neighbor-reports, Allows to configure static neighbor reports for hostapd interfaces. These neighbor reports are avilable to clients using IEEE 802.11k. | 1kB | 0kB | GPL-2.0-only | David Bauer | packages:pkgdata:static-neighbor-reports, Bug reports | packages:pkgdata:static-neighbor-reports, Sources |
| network | iotivity-example-garage | 1.2.1-1 | libc, iotivity, iotivity-cpp, iotivity-resource-directory-lib | An IoTivity example application | 59kB | 58kB | Apache-2.0 | Hauke Mehrtens | Bug reports | Sources |
| network | iotivity-example-garage | 1.2.1-2 | libc, iotivity, iotivity-cpp, iotivity-resource-directory-lib | An IoTivity example application | 58kB | 58kB | Apache-2.0 | Hauke Mehrtens | Bug reports | Sources |
| network | iotivity-example-garage | 1.2.1-2 | libc, iotivity, iotivity-cpp, iotivity-resource-directory-lib | An IoTivity example application | 58kB | 58kB | Apache-2.0 | Hauke Mehrtens | Bug reports | Sources |
| network | iotivity-example-garage | 1.2.1-2 | libc, iotivity, iotivity-cpp, iotivity-resource-directory-lib | An IoTivity example application | 62kB | 61kB | Apache-2.0 | Hauke Mehrtens | Bug reports | Sources |
| network | netdiscover | 0.3-pre-beta7-1 | libc, libssp, libpcap, libnet-1.2.x, libpthread | An active/passive address reconnaissance tool | 279kB | 285kB | GPL-2.0 | Mislav Novakovic | Bug reports | Sources |
| network | netdiscover | 0.3-pre-beta7-2 | libc, libpcap1, libnet-1.2.x, libpthread | An active/passive address reconnaissance tool | 286kB | 290kB | GPL-2.0 | Mislav Novakovic | Bug reports | Sources |
| network | netdiscover | 0.3-pre-beta7-1 | libc, libssp, libpcap, libnet-1.2.x, libpthread | An active/passive address reconnaissance tool | 277kB | 283kB | GPL-2.0 | Mislav Novakovic | Bug reports | Sources |
| network | netdiscover | 0.3-pre-beta7-1 | libc, libssp, libpcap1, libnet-1.2.x, libpthread | An active/passive address reconnaissance tool | 277kB | 283kB | GPL-2.0 | Mislav Novakovic | Bug reports | Sources |
| network | netdiscover | 0.3-pre-beta7-2 | libc, librt, libpthread, libpcap1, libnet-1.2.x | An active/passive address reconnaissance tool | 278kB | 284kB | GPL-2.0 | Mislav Novakovic | Bug reports | Sources |
| Previous page Next page | ||||||||||