This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='network'

类别名称 版本依赖包描述信息软件包体积安装后大小授权方式维护人报告错误源代码
networkcoap-serverv4.1.2-1libc, libcoapConstrained Application Protocol (RFC 7252) server and resource directory server

10kB9kBGPL-2.0+ BSD-2-ClauseAnton GlukhovBug reportsSources
networktunneldigger-broker-srcv0.4.0-1libcTunneldigger is a simple VPN tunneling solution based on the Linux kernel
support for L2TPv3 tunnels over UDP. This package contains the broker.

This package contains the Python source files for tunneldigger-broker.

19kB18kBAGPL-3.0Nick HainkeBug reportsSources
networktunneldigger-brokerv0.4.0-1libc, ip, kmod-l2tp, kmod-l2tp-eth, kmod-sched, libnfnetlink0, libnl-tiny1, libpthread, librt, python3-ctypes, python3-light, python3-logging, tc-tinyTunneldigger is a simple VPN tunneling solution based on the Linux kernel
support for L2TPv3 tunnels over UDP. This package contains the broker.

29kB28kBAGPL-3.0Nick HainkeBug reportsSources
networkrestoolLSDK-20.04-2libcLayerscape DPAA2 dynamical management tool

105kB105kBOpenWrt teamBug reportsSources
network6rd9-4libc, kmod-sitProvides support for 6rd tunnels in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

3kB2kBGPL-2.0Steven BarthBug reportsSources
network6rd9-4libc, libssp, kmod-sitProvides support for 6rd tunnels in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

3kB2kBGPL-2.0Steven BarthBug reportsSources
network6rd9-2libc, libssp, kmod-sitProvides support for 6rd tunnels in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

3kB2kBGPL-2.0Steven BarthBug reportsSources
networklibcurl48.4.0-1libc, librt, libpthread, libmbedtls12, libnghttp2-14, ca-bundleA client-side URL transfer library

155kB154kBMITStan GrishinBug reportsSources
networkrsyslog8.39.0-2libc, libestr, libfastjson, libuuid1, zlibEnhanced system logging and kernel message trapping daemons

302kB302kBGPL-3.0common packages maintainersBug reportsSources
networkrsyslog8.2006.0-1libc, librt, libpthread, libestr, libfastjson, libuuid1, zlibEnhanced system logging and kernel message trapping daemons

293kB294kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networkconserver8.2.6-1libc, libopenssl1.1Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

112kB111kBBSD-3-ClauseBjørn MorkBug reportsSources
networkconserver8.2.6-1libc, libopenssl1.1Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

111kB110kBBSD-3-ClauseBjørn MorkBug reportsSources
networkconserver8.2.4-1libc, libopenssl1.1Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

103kB102kBBSD-3-ClauseBjørn MorkBug reportsSources
networkconserver8.2.1-1libc, libopensslpackages:pkgdata_owrt18_6:conserver, Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

105kB104kBBSD-3-ClauseBjørn Morkpackages:pkgdata_owrt18_6:conserver, Bug reportspackages:pkgdata_owrt18_6:conserver, Sources
networkconserver8.2.1-1libc, libopensslConserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

105kB104kBBSD-3-ClauseBjørn MorkBug reportsSources
networkconserver8.2.1-1libc, libssp, libopensslpackages:pkgdata:conserver, Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

93kB92kBBSD-3-ClauseBjørn Morkpackages:pkgdata:conserver, Bug reportspackages:pkgdata:conserver, Sources
networkrsyslog8.18.0-1libc, libestr, libfastjson, libuuid, zlibEnhanced system logging and kernel message trapping daemons

283kB284kBGPL-3.0Dov MurikBug reportsSources
networkrsyslog8.18.0-1libc, libestr, libfastjson, libuuid, zlibEnhanced system logging and kernel message trapping daemons

277kB277kBGPL-3.0Dov MurikBug reportsSources
networkds-lite8libc, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
networkds-lite8libc, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
networklibcurl47.83.1-4.1libc, libwolfssl5.5.3.99a5b54a, libnghttp2-14, ca-bundleA client-side URL transfer library

165kB165kBMITStan GrishinBug reportsSources
networklibcurl47.66.0-3libc, libssp, libmbedtls12, ca-bundleA client-side URL transfer library

107kB106kBMITImre KalozBug reportsSources
networkipset7.6-1libc, kmod-ipt-ipset, libmnl0, libipset13IPset administration utility

2kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
networklibipset137.6-1libc, kmod-ipt-ipset, libmnl0IPset administration utility

46kB46kBGPL-2.0Jo-Philipp WichBug reportsSources
networklibipset137.3-1libc, libssp, kmod-ipt-ipset, libmnl0IPset administration utility

38kB37kBGPL-2.0Jo-Philipp WichBug reportsSources
networkipset7.3-1libc, kmod-ipt-ipset, libmnl0, libipset13IPset administration utility

1kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
networkdhcpcd7.2.2-1libcpackages:pkgdata:dhcpcd, DHCPv4, IPv6RS and DHCPv6 client with IPv4LL support
dhcpcd is a one stop network management daemon which includes
* RFC compliant DHCPv4 and DHCPv6 clients
* DHCPv6 Prefix Delegation support
* IPv4LL (aka ZeroConf) support
* ARP address conflict resolution
* Link carrier detection
* Wireless SSID profiles
* ARP ping profiles

127kB126kBBSD-2cMarko Ratkajpackages:pkgdata:dhcpcd, Bug reportspackages:pkgdata:dhcpcd, Sources
networkdhcpcd7.2.2-1libc, librt, libpthreadDHCPv4, IPv6RS and DHCPv6 client with IPv4LL support
dhcpcd is a one stop network management daemon which includes
* RFC compliant DHCPv4 and DHCPv6 clients
* DHCPv6 Prefix Delegation support
* IPv4LL (aka ZeroConf) support
* ARP address conflict resolution
* Link carrier detection
* Wireless SSID profiles
* ARP ping profiles

106kB105kBBSD-2cMarko RatkajBug reportsSources
networkdhcpcd7.2.2-1libcDHCPv4, IPv6RS and DHCPv6 client with IPv4LL support
dhcpcd is a one stop network management daemon which includes
* RFC compliant DHCPv4 and DHCPv6 clients
* DHCPv6 Prefix Delegation support
* IPv4LL (aka ZeroConf) support
* ARP address conflict resolution
* Link carrier detection
* Wireless SSID profiles
* ARP ping profiles

117kB116kBBSD-2cMarko RatkajBug reportsSources
networkdhcpcd7.2.2-1libcDHCPv4, IPv6RS and DHCPv6 client with IPv4LL support
dhcpcd is a one stop network management daemon which includes
* RFC compliant DHCPv4 and DHCPv6 clients
* DHCPv6 Prefix Delegation support
* IPv4LL (aka ZeroConf) support
* ARP address conflict resolution
* Link carrier detection
* Wireless SSID profiles
* ARP ping profiles

127kB126kBBSD-2cMarko RatkajBug reportsSources
networkboinc7.16.16-1libc, curl, bzip2, libstdcpp6, libopenssl1.1, zlibpackages:pkgdata:boinc, The Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC core client program that is
required to participate in any project that uses BOINC to control what
projects to join and to determine constraints for the computation
like the percentage of CPU time. OpenWrt does not
provide the graphical BOINC Manager, but you can connect to this
machine from the BOINC Manager of your desktop computer.

759kB759kBGPL-3.0-or-laterChristian Dreihsig, Steffen Moeller,packages:pkgdata:boinc, Bug reportspackages:pkgdata:boinc, Sources
networkboinc7.16.16-1libc, curl, bzip2, libstdcpp6, libopenssl1.1, zlibThe Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC core client program that is
required to participate in any project that uses BOINC to control what
projects to join and to determine constraints for the computation
like the percentage of CPU time. OpenWrt does not
provide the graphical BOINC Manager, but you can connect to this
machine from the BOINC Manager of your desktop computer.

811kB810kBGPL-3.0-or-laterChristian Dreihsig, Steffen Moeller,Bug reportsSources
networkboinc7.16.16-1libc, libssp, curl, bzip2, libstdcpp6, libopenssl1.1, zlibThe Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC core client program that is
required to participate in any project that uses BOINC to control what
projects to join and to determine constraints for the computation
like the percentage of CPU time. OpenWrt does not
provide the graphical BOINC Manager, but you can connect to this
machine from the BOINC Manager of your desktop computer.

778kB777kBGPL-3.0-or-laterChristian Dreihsig, Steffen Moeller,Bug reportsSources
networkboinc7.16.16-1libc, curl, bzip2, libstdcpp6, libopenssl1.1, zlibThe Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC core client program that is
required to participate in any project that uses BOINC to control what
projects to join and to determine constraints for the computation
like the percentage of CPU time. OpenWrt does not
provide the graphical BOINC Manager, but you can connect to this
machine from the BOINC Manager of your desktop computer.

759kB759kBGPL-3.0-or-laterChristian Dreihsig, Steffen Moeller,Bug reportsSources
networkipset7.15-2libc, kmod-ipt-ipset, libmnl0, libipset13packages:pkgdata:ipset, IPset administration utility

2kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:ipset, Bug reportspackages:pkgdata:ipset, Sources
networklibipset137.15-2libc, kmod-ipt-ipset, libmnl0IPset administration utility

43kB42kBGPL-2.0Jo-Philipp WichBug reportsSources
networkipset7.15-2libc, kmod-ipt-ipset, libmnl0, libipset13IPset administration utility

2kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
networkseafile-server-fuse7.1.5-3libc, bash, glib2, jansson4, libevent2-7, libevent2-openssl7, libfuse1, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1, procps-ng, procps-ng-pkill, seafile-ccnet, seafile-server, zlibOpen source cloud storage with advanced features on privacy
protection and teamwork.

This package contains the FUSE extension (seaf-fuse) for Seafile
server.

56kB55kBAGPL-3.0-onlyJeffery ToBug reportsSources
networkseafile-server7.1.5-3libc, bash, glib2, jansson4, libarchive, libevent2-7, libevent2-openssl7, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1, oniguruma5, procps-ng, procps-ng-pkill, python3-pymysql, python3-seafile-server, seafile-ccnet, seafile-seahub, sqlite3-cli, zlibOpen source cloud storage with advanced features on privacy
protection and teamwork.

431kB432kBAGPL-3.0-onlyJeffery ToBug reportsSources
networkseafile-ccnet7.1.5-2libc, glib2, jansson4, libevent2-7, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1Ccnet is a framework for writing networked applications in C.

137kB137kBAGPL-3.0-onlyJeffery ToBug reportsSources
networkseafile-seahub7.1.5-2libc, gunicorn3, python3, python3-chardet, python3-cryptodome, python3-dateutil, python3-django1, python3-django-formtools, python3-django-picklefield, python3-django-postoffice, python3-django-restframework39, python3-django-simple-captcha, python3-django-statici18n, python3-django-webpack-loader, python3-openpyxl, python3-pillow, python3-pyjwt, python3-pymysql, python3-pytz, python3-qrcode, python3-requests, python3-requests-oauthlib, python3-seafile-ccnet, python3-searpcThe web end of seafile server.

Note: Localization support is turned off by default for performance
reasons. Set 'USE_I18N = True' in /etc/seafile/conf/seahub_settings.py
to use languages other than English.

20976kB21039kBApache-2.0Jeffery ToBug reportsSources
networkseafile-seahub-src7.1.5-2libc, librt, libpthreadThe web end of seafile server.

Note: Localization support is turned off by default for performance
reasons. Set 'USE_I18N = True' in /etc/seafile/conf/seahub_settings.py
to use languages other than English.

This package contains the Python source files for seafile-seahub.

516kB515kBApache-2.0Jeffery ToBug reportsSources
networkseafile-server-fuse7.1.5-2libc, librt, libpthread, bash, glib2, jansson4, libevent2-7, libevent2-openssl7, libfuse1, libmariadb3, libopenssl1.1, libsearpc, libsqlite3-0, libuuid1, procps-ng, procps-ng-pkill, seafile-ccnet, seafile-server, zlibOpen source cloud storage with advanced features on privacy
protection and teamwork.

This package contains the FUSE extension (seaf-fuse) for Seafile
server.

45kB45kBAGPL-3.0-onlyAlexandru Ardelean, Jeffery To,Bug reportsSources
networkseafile-server7.1.5-2libc, bash, glib2, jansson4, libarchive, libevent2-7, libevent2-openssl7, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1, oniguruma5, procps-ng, procps-ng-pkill, python3-pymysql, python3-seafile-server, seafile-ccnet, seafile-seahub, sqlite3-cli, zlibOpen source cloud storage with advanced features on privacy
protection and teamwork.

428kB430kBAGPL-3.0-onlyAlexandru Ardelean, Jeffery To,Bug reportsSources
networkseafile-seahub-src7.1.5-1libcThe web end of seafile server.

Note: Localization support is turned off by default for performance
reasons. Set 'USE_I18N = True' in /etc/seafile/conf/seahub_settings.py
to use languages other than English.

This package contains the Python source files for seafile-seahub.

516kB515kBApache-2.0Alexandru Ardelean, Jeffery To,Bug reportsSources
networkseafile-seahub7.1.5-1libc, librt, libpthread, gunicorn3, python3, python3-chardet, python3-cryptodome, python3-dateutil, python3-django1, python3-django-formtools, python3-django-picklefield, python3-django-postoffice, python3-django-restframework39, python3-django-simple-captcha, python3-django-statici18n, python3-django-webpack-loader, python3-openpyxl, python3-pillow, python3-pyjwt, python3-pymysql, python3-pytz, python3-qrcode, python3-requests, python3-requests-oauthlib, python3-seafile-ccnet, python3-searpcThe web end of seafile server.

Note: Localization support is turned off by default for performance
reasons. Set 'USE_I18N = True' in /etc/seafile/conf/seahub_settings.py
to use languages other than English.

20973kB21038kBApache-2.0Alexandru Ardelean, Jeffery To,Bug reportsSources
networkseafile-ccnet7.1.5-1libc, glib2, jansson4, libevent2-7, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1Ccnet is a framework for writing networked applications in C.

137kB137kBAGPL-3.0-onlyAlexandru Ardelean, Jeffery To,Bug reportsSources
networkds-lite7-4libc, libssp, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
networkds-lite7-4libc, libssp, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
networkds-lite7-2libc, libssp, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy