软件包列表
软件包分类
点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。
软件包列表
为了不影响您的体验,每页只显示50个软件包。
- 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
- 点击表头可对按对应字段对内容进行排序。
- 在
反白框输入您的筛选条件。
当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。
Filtered by categories='network'
| 类别 | 名称 | ↑ 版本 | 依赖包 | 描述信息 | 软件包体积 | 安装后大小 | 授权方式 | 维护人 | 报告错误 | 源代码 |
|---|---|---|---|---|---|---|---|---|---|---|
| network | map | 7 | libc, kmod-ip6-tunnel, libubox20210516, libubus20210630, iptables-mod-conntrack-extra, kmod-nat46 | Provides support for MAP-E (RFC7597), MAP-T (RFC7599) and Lightweight 4over6 (RFC7596) in /etc/config/network. MAP combines address and port translation with the tunneling of IPv4 packets over an IPv6 network | 8kB | 7kB | GPL-2.0 | Hans Dedecker | Bug reports | Sources |
| network | vxlan | 7 | libc, librt, libpthread, kmod-vxlan | Virtual eXtensible LAN config support in /etc/config/network. | 2kB | 1kB | GPL-2.0 | Matthias Schiffer | Bug reports | Sources |
| network | vxlan | 7 | libc, kmod-vxlan | Virtual eXtensible LAN config support in /etc/config/network. | 2kB | 1kB | GPL-2.0 | Matthias Schiffer | Bug reports | Sources |
| network | map | 7 | libc, kmod-ip6-tunnel, libubox20220515, libubus20220601, iptables-mod-conntrack-extra, kmod-nat46 | Provides support for MAP-E (RFC7597), MAP-T (RFC7599) and Lightweight 4over6 (RFC7596) in /etc/config/network. MAP combines address and port translation with the tunneling of IPv4 packets over an IPv6 network | 7kB | 7kB | GPL-2.0 | Hans Dedecker | Bug reports | Sources |
| network | cifsmount | 6.9-1 | libc, kmod-fs-cifs | CIFS mount utilities | 12kB | 11kB | GPL-3.0 | Florian Fainelli | Bug reports | Sources |
| network | ltq-vdsl-vr9-vectoring-fw-installer | 6.8.6-4 | libc, kmod-ltq-vdsl-vr9 | VDSL2 Vectoring Firmware installer | 5kB | 4kB | Daniel Golle | Bug reports | Sources | |
| network | ltq-vdsl-vr9-vectoring-fw-installer | 6.8.6-3 | libc, kmod-ltq-vdsl-vr9 | VDSL2 Vectoring Firmware installer | 5kB | 4kB | Daniel Golle | Bug reports | Sources | |
| network | ltq-vdsl-vr9-vectoring-fw-installer | 6.8.6-3 | libc, kmod-ltq-vdsl-vr9 | VDSL2 Vectoring Firmware installer | 5kB | 4kB | Daniel Golle | Bug reports | Sources | |
| network | cifsmount | 6.8-1 | libc, kmod-fs-cifs | packages:pkgdata_owrt18_6:cifsmount, CIFS mount utilities | 12kB | 11kB | GPL-3.0 | Florian Fainelli | packages:pkgdata_owrt18_6:cifsmount, Bug reports | packages:pkgdata_owrt18_6:cifsmount, Sources |
| network | cifsmount | 6.8-1 | libc, kmod-fs-cifs | CIFS mount utilities | 12kB | 11kB | GPL-3.0 | Florian Fainelli | Bug reports | Sources |
| network | dhcpcd | 6.4.3-1 | libc | DHCPv4, IPv6RS and DHCPv6 client with IPv4LL support dhcpcd is a one stop network management daemon which includes * RFC compliant DHCPv4 and DHCPv6 clients * DHCPv6 Prefix Delegation support * IPv4LL (aka ZeroConf) support * ARP address conflict resolution * Link carrier detection * Wireless SSID profiles * ARP ping profiles | 99kB | 98kB | BSD-2c | Roy Marples | Bug reports | Sources |
| network | cifsmount | 6.4-2 | libc, kmod-fs-cifs | CIFS mount utilities | 12kB | 12kB | GPL-3.0 | Florian Fainelli | Bug reports | Sources |
| network | libipset | 6.38-1 | libc, kmod-ipt-ipset, libmnl | IPset administration utility | 33kB | 32kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | ipset | 6.38-1 | libc, kmod-ipt-ipset, libmnl, libipset | IPset administration utility | 31kB | 30kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | libipset | 6.38-1 | libc, libssp, kmod-ipt-ipset, libmnl | IPset administration utility | 30kB | 30kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | ipset | 6.32-1 | libc, libssp, kmod-ipt-ipset, libmnl | packages:pkgdata_lede17_1:ipset, IPset administration utility | 69kB | 69kB | GPL-2.0 | Jo-Philipp Wich | packages:pkgdata_lede17_1:ipset, Bug reports | packages:pkgdata_lede17_1:ipset, Sources |
| network | ipset | 6.32-1 | libc, libssp, kmod-ipt-ipset, libmnl | IPset administration utility | 69kB | 69kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | seafile-server | 6.3.4-6 | libc, libarchive, libopenssl1.1, glib2, libsearpc, seafile-ccnet, seafile-seahub, sqlite3-cli, python-mysql, python-urllib3, jansson, libevent2-7, libevent2-openssl7, zlib, libzdb, libsqlite3-0, libmysqlclient, oniguruma5, libpthread, libuuid1, bash, procps-ng, procps-ng-pkill | Open source cloud storage with advanced features on privacy protection and teamwork. | 483kB | 484kB | GPL-3.0 | Alexandru Ardelean | Bug reports | Sources |
| network | seafile-seahub | 6.3.4-6 | libc, libssp, python, python-flup, gunicorn, openpyxl, python-simplejson, python-chardet, python-dateutil, python-mysql, python-pytz, python-qrcode, python-requests, python-requests-oauthlib, python-django, python-django-constance, python-django-appconf, python-django-compressor, python-django-formtools, python-django-jsonfield, python-django-picklefield, python-django-postoffice, python-django-restframework, python-pillow, python-django-simple-captcha | The web end of seafile server. NOTE: in order to have better performance, localization support is turned off by default. Please set 'USE_I18N = True' in seahub_settings.py if you intend to use languages other than English. | 20018kB | 20048kB | Apache-2.0 | Alexandru Ardelean | Bug reports | Sources |
| network | seafile-ccnet | 6.3.4-2 | libc, libsearpc, libevent2-7, libopenssl1.1, glib2, python, libzdb, libuuid1, libpthread, libsqlite3-0, jansson | Ccnet is a framework for writing networked applications in C. | 136kB | 136kB | GPL-3.0 | Alexandru Ardelean | Bug reports | Sources |
| network | seafile-ccnet | 6.2.2-6b9d7e2920aa9b8..c-1 | libsearpc (=6.2.2-8998e7b2c5587f0b94c48db24e2952d08def5add-1), libc, libssp, libsearpc, libevent2, libopenssl, glib2, python, libzdb, libuuid, libpthread, libsqlite3, jansson | Ccnet is a framework for writing networked applications in C. | 127kB | 127kB | GPL-3.0 | Gergely Kiss | Bug reports | Sources |
| network | seafile-server | 6.2.2-6978d2cb2e05cc7..6-1 | seafile-ccnet (=6.2.2-6b9d7e2920aa9b807f9efe9038439b57ce949ecc-1), seafile-seahub (=6.2.2-120e7a299e77968f1af48ea2dcf4bd9b909c426f-1), libc, libarchive, libopenssl, glib2, libsearpc, seafile-ccnet, seafile-seahub, sqlite3-cli, python-mysql, python-urllib3, jansson, libevent2, libevent2-openssl, zlib, libzdb, libsqlite3, libmysqlclient, libpthread, libuuid, bash, procps-ng, procps-ng-pkill | Open source cloud storage with advanced features on privacy protection and teamwork. | 539kB | 543kB | GPL-3.0 | Gergely Kiss | Bug reports | Sources |
| network | seafile-seahub | 6.2.2-120e7a299e77968..f-1 | libc, simplejson, python, pillow, chardet, django, django-appconf, django-compressor, django-constance, django-jsonfield, django-picklefield, django-postoffice, django-restframework, django-statici18n, et_xmlfile, flup, gunicorn, jdcal, openpyxl, python-dateutil, python-mysql, pytz, rcssmin | The web end of seafile server. NOTE: in order to have better performance, localization support is turned off by default. Please set 'USE_I18N = True' in seahub_settings.py if you intend to use languages other than English. | 9630kB | 9655kB | Apache-2.0 | Gergely Kiss | Bug reports | Sources |
| network | dhcpcd | 6.11.5-1 | libc | DHCPv4, IPv6RS and DHCPv6 client with IPv4LL support dhcpcd is a one stop network management daemon which includes * RFC compliant DHCPv4 and DHCPv6 clients * DHCPv6 Prefix Delegation support * IPv4LL (aka ZeroConf) support * ARP address conflict resolution * Link carrier detection * Wireless SSID profiles * ARP ping profiles | 113kB | 112kB | BSD-2c | Marko Ratkaj | Bug reports | Sources |
| network | smbinfo | 6.11-2 | libc, kmod-fs-cifs | packages:pkgdata:smbinfo, SMB info | 8kB | 8kB | GPL-3.0-or-later | common packages maintainers | packages:pkgdata:smbinfo, Bug reports | packages:pkgdata:smbinfo, Sources |
| network | cifsmount | 6.11-2 | libc, kmod-fs-cifs | packages:pkgdata:cifsmount, CIFS mount | 13kB | 12kB | GPL-3.0-or-later | common packages maintainers | packages:pkgdata:cifsmount, Bug reports | packages:pkgdata:cifsmount, Sources |
| network | smbinfo | 6.11-2 | libc, librt, libpthread, kmod-fs-cifs | SMB info | 8kB | 7kB | GPL-3.0-or-later | common packages maintainers | Bug reports | Sources |
| network | cifsmount | 6.11-2 | libc, kmod-fs-cifs | CIFS mount | 13kB | 13kB | GPL-3.0-or-later | common packages maintainers | Bug reports | Sources |
| network | smbinfo | 6.11-2 | libc, kmod-fs-cifs | SMB info | 8kB | 8kB | GPL-3.0-or-later | common packages maintainers | Bug reports | Sources |
| network | cifsmount | 6.11-2 | libc, kmod-fs-cifs | CIFS mount | 13kB | 12kB | GPL-3.0-or-later | common packages maintainers | Bug reports | Sources |
| network | portmap | 6.0-4 | libc, libssp, libwrap, librpc | Portmap is a server that converts RPC (Remote Procedure Call) program numbers into DARPA protocol port numbers. | 6kB | 5kB | BSD-4c | Peter Wagner | Bug reports | Sources |
| network | portmap | 6.0-4 | libc, libssp, libwrap, librpc | Portmap is a server that converts RPC (Remote Procedure Call) program numbers into DARPA protocol port numbers. | 6kB | 5kB | BSD-4c | Peter Wagner | Bug reports | Sources |
| network | portmap | 6.0-4 | libc, libssp, libwrap, librpc | Portmap is a server that converts RPC (Remote Procedure Call) program numbers into DARPA protocol port numbers. | 6kB | 6kB | BSD-4c | Peter Wagner | Bug reports | Sources |
| network | tmate-ssh-server | 511fd2bd852464e768242..4-2 | libc, libevent2-7, libncurses6, libpthread, libssh, msgpack-c, terminfo, openssh-keygen | tmate-ssh-server is the server side part of tmate.io. | 241kB | 241kB | ISC | Paul Spooren | Bug reports | Sources |
| network | atlas-sw-probe-rpc | 5080-2 | libc, atlas-probe, bind-dig, rpcd | packages:pkgdata:atlas-sw-probe-rpc, Provides ubus calls for probe. | 1kB | 0kB | GPL-3.0-or-later | Jan Pavlinec | packages:pkgdata:atlas-sw-probe-rpc, Bug reports | packages:pkgdata:atlas-sw-probe-rpc, Sources |
| network | atlas-sw-probe-rpc | 5080-2 | libc, librt, libpthread, atlas-probe, bind-dig, rpcd | Provides ubus calls for probe. | 1kB | 0kB | GPL-3.0-or-later | Jan Pavlinec | Bug reports | Sources |
| network | atlas-sw-probe | 5080-2 | libc, atlas-probe, dropbearconvert | RIPE Atlas SW probe is software variant of RIPE Atlas Probe. It contains utilities which helps actively measure Internet connectivity through ping, traceroute, DNS, SSL/TLS, NTP, and HTTP. Data are then collected, aggregated and published by the RIPE NCC. | 20kB | 19kB | GPL-3.0-or-later | Jan Pavlinec | Bug reports | Sources |
| network | atlas-sw-probe | 5080-2 | libc, librt, libpthread, atlas-probe, dropbearconvert | RIPE Atlas SW probe is software variant of RIPE Atlas Probe. It contains utilities which helps actively measure Internet connectivity through ping, traceroute, DNS, SSL/TLS, NTP, and HTTP. Data are then collected, aggregated and published by the RIPE NCC. | 20kB | 19kB | GPL-3.0-or-later | Jan Pavlinec | Bug reports | Sources |
| network | atlas-sw-probe-rpc | 5080-2 | libc, atlas-probe, bind-dig, rpcd | Provides ubus calls for probe. | 1kB | 0kB | GPL-3.0-or-later | Jan Pavlinec | Bug reports | Sources |
| network | snmp-utils | 5.9.1-7 | libc, libnetsnmp | packages:pkgdata:snmp-utils, Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP client utilities: - snmpget - snmpset - snmpstatus - snmptest - snmptrap - snmpwalk | 16kB | 16kB | MIT BSD-3-Clause-Clear | Stijn Tintel | packages:pkgdata:snmp-utils, Bug reports | packages:pkgdata:snmp-utils, Sources |
| network | snmptrapd | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP notification receiver. | 22kB | 21kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmpd | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP agent, dynamically linked. | 11kB | 10kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmp-utils | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP client utilities: - snmpget - snmpset - snmpstatus - snmptest - snmptrap - snmpwalk | 16kB | 16kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmp-mibs | 5.9.1-7 | libc | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP MIB-Files. | 333kB | 332kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | iw | 5.9-8fab0c9e-3 | libc, libnl-tiny1 | cfg80211 interface configuration utility | 48kB | 48kB | GPL-2.0 | Felix Fietkau | Bug reports | Sources |
| network | iw-full | 5.9-8fab0c9e-3 | libc, libnl-tiny1 | cfg80211 interface configuration utility (full version) | 83kB | 83kB | GPL-2.0 | Felix Fietkau | Bug reports | Sources |
| network | snmptrapd | 5.8-2 | libc, librt, libpthread, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP notification receiver. | 20kB | 19kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmp-utils | 5.8-2 | libc, librt, libpthread, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP client utilities: - snmpget - snmpset - snmpstatus - snmptest - snmptrap - snmpwalk | 18kB | 18kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmpd | 5.8-2 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP agent, dynamically linked. | 11kB | 10kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmp-mibs | 5.8-2 | libc, librt, libpthread | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP MIB-Files. | 332kB | 331kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| Previous page Next page | ||||||||||