This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='base-system'

类别名称版本依赖包描述信息软件包体积安装后大小授权方式维护人报告错误 源代码
base-systemdnsmasq-full2.86-16libc, libubus20220601, libnettle8, kmod-ipt-ipset, libnetfilter-conntrack3packages:pkgdata:dnsmasq-full, It is intended to provide coupled DNS and DHCP service to a LAN.

This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS
and IPset, Conntrack support & NO_ID enabled by default.

187kB187kBGPL-2.0OpenWrt teampackages:pkgdata:dnsmasq-full, Bug reportspackages:pkgdata:dnsmasq-full, Sources
base-systemdnsmasq2.86-16libc, libubus20220601It is intended to provide coupled DNS and DHCP service to a LAN.

136kB135kBGPL-2.0OpenWrt teamBug reportsSources
base-systemdnsmasq-full2.86-16libc, libubus20220601, libnettle8, kmod-ipt-ipset, libnetfilter-conntrack3It is intended to provide coupled DNS and DHCP service to a LAN.

This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS
and IPset, Conntrack support & NO_ID enabled by default.

187kB187kBGPL-2.0OpenWrt teamBug reportsSources
base-systemdnsmasq-dhcpv62.86-16libc, libubus20220601It is intended to provide coupled DNS and DHCP service to a LAN.

This is a variant with DHCPv6 support

162kB161kBGPL-2.0OpenWrt teamBug reportsSources
base-systemswconfig12libc, librt, libpthread, libuci20130104, libnl-tiny1Switch configuration utility

8kB8kBGPL-2.0Felix FietkauBug reportsSources
base-systemqosify2022-03-22-57c7817f-1libc, libbpf20220308, libubox20220515, libubus20220601, kmod-sched-cake, kmod-sched-bpf, kmod-ifb, tc-fullA simple QoS solution based eBPF + CAKE

26kB26kBGPL-2.0Felix FietkauBug reportsSources
base-systemqos-scripts1.3.1-31libc, tc, kmod-sched-core, kmod-sched-connmark, kmod-ifb, iptables, iptables-mod-ipopt, iptables-mod-conntrack-extraA set of scripts that abstract QoS configuration into a simple
configuration file supporting stanzas that specify any number of QoS
entries.

7kB6kBGPL-2.0Felix FietkauBug reportsSources
base-systemnetifd2022-08-25-76d2d41b-1libc, libuci20130104, libnl-tiny1, libubus20220601, ubus, ubusd, jshn, libubox20220515OpenWrt Network Interface Configuration Daemon

100kB99kBGPL-2.0Felix FietkauBug reportsSources
base-systemfirewall2022-02-17-4cd7d4f3-3libc, libubox20220515, libubus20220601, libuci20130104, libip4tc2, libip6tc2, libiptext0, libiptext6-0, libxtables12, kmod-ipt-core, kmod-ipt-conntrack, kmod-nf-conntrack6, kmod-ipt-natpackages:pkgdata:firewall, This package provides a config-compatible C implementation of the UCI firewall.

52kB51kBISCJo-Philipp Wichpackages:pkgdata:firewall, Bug reportspackages:pkgdata:firewall, Sources
base-systemfirewall2022-02-17-4cd7d4f3-3libc, libubox20220515, libubus20220601, libuci20130104, libip4tc2, libip6tc2, libiptext0, libiptext6-0, libxtables12, kmod-ipt-core, kmod-ipt-conntrack, kmod-nf-conntrack6, kmod-ipt-natThis package provides a config-compatible C implementation of the UCI firewall.

52kB51kBISCJo-Philipp WichBug reportsSources
base-systemfirewall42022-10-18-7ae5e14b-1ucode_2022-03-22, libc, kmod-nft-core, kmod-nft-fib, kmod-nft-offload, kmod-nft-nat, nftables-json, ucode, ucode-mod-fs, ucode-mod-ubus, ucode-mod-uciThis package provides an nftables-based implementation of the UCI firewall
sharing the same configuration format.

28kB27kBISCJo-Philipp WichBug reportsSources
base-systemlibpthread1.2.3-4libgcc1packages:pkgdata:libpthread, POSIX thread library

0kB0kBGPL-3.0-with-GCC-exceptionFelix Fietkaupackages:pkgdata:libpthread, Bug reportspackages:pkgdata:libpthread, Sources
base-systemlibstdcpp611.2.0-4GNU Standard C++ Library v3

461kB468kBGPL-3.0-with-GCC-exceptionFelix FietkauBug reportsSources
base-systemlibatomic111.2.0-4libgcc1Atomic support library

8kB7kBGPL-3.0-with-GCC-exceptionFelix FietkauBug reportsSources
base-systemlibgcc111.2.0-4GCC support library

21kB20kBGPL-3.0-with-GCC-exceptionFelix FietkauBug reportsSources
base-systemlibthread-db2.34-4POSIX thread library debugging support

10kB9kBGPL-3.0-with-GCC-exceptionFelix FietkauBug reportsSources
base-systemlibrt1.2.3-4libpthreadPOSIX.1b RealTime extension library

0kB0kBGPL-3.0-with-GCC-exceptionFelix FietkauBug reportsSources
base-systemlibpthread1.2.3-4libgcc1POSIX thread library

0kB0kBGPL-3.0-with-GCC-exceptionFelix FietkauBug reportsSources
base-systembase-files1490-r19685-512e76967flibc, netifd, jsonfilter, usign, openwrt-keyring, fstools, fwtoolThis package contains a base filesystem and system scripts for OpenWrt.

45kB44kBGPL-2.0OpenWrt teamBug reportsSources
base-systemotrx1libcThis package contains an utility that allows validating TRX images.

5kB5kBRafał MiłeckiBug reportsSources
base-systemoseama1libcThis package contains an utility that allows handling Seama images.

6kB6kBRafał MiłeckiBug reportsSources
base-systemosafeloader1libcThis package contains an utility that allows handling SafeLoader images.

5kB4kBRafał MiłeckiBug reportsSources
base-systemnvram10libcThis package contains an utility to manipulate NVRAM on Broadcom based devices.
It works on bcm47xx (Linux 2.6) without using the kernel api.

6kB5kBJo-Philipp WichBug reportsSources
base-systemjsonfilter2018-02-04-c7e938d6-1libc, libubox20210516, libjson-c5OpenWrt JSON filter utility

10kB10kBISCJo-Philipp WichBug reportsSources
base-systembusybox1.33.2-2libcThe Swiss Army Knife of embedded Linux.
It slices, it dices, it makes Julian Fries.

232kB231kBGPL-2.0Felix FietkauBug reportsSources
base-systembusybox-selinux1.33.2-2libc, libselinuxCore utilities for embedded Linux with SELinux support

240kB239kBGPL-2.0Felix FietkauBug reportsSources
base-systembcm4908img1libcCFE bootloader for BCM4908 uses custom image format. It consists of:
1. Optional cferom image
2. bootfs JFFS2 partition (cferam, kernel, DTB and optional helper files)
3. padding
4. rootfs simply appended to the bootfs + padding
5. tail with checksum and basic device info

This util allows creating, modifying and extracting from BCM4908 images.

7kB7kBRafał MiłeckiBug reportsSources
base-systemzram-swap8libc, kmod-zramA script to activate swaping on a compressed zram partition. This
could be used to increase the available memory, by using compressed
memory.

2kB2kBOpenWrt teamBug reportsSources
base-systemusign2020-05-23-f1f65026-1libc, librt, libpthread, libubox20210516OpenWrt signature verification utility

12kB11kBISCFelix FietkauBug reportsSources
base-systemurngd2020-01-21-c7f7b6b6-1libc, librt, libpthread, libubox20210516urngd is OpenWrt's micro non-physical true random number generator based on
timing jitter.

Using the Jitter RNG core, the rngd provides an entropy source that feeds into
the Linux /dev/random device if its entropy runs low. It updates the
/dev/random entropy estimator such that the newly provided entropy unblocks
/dev/random.

The seeding of /dev/random also ensures that /dev/urandom benefits from
entropy. Especially during boot time, when the entropy of Linux is low, the
Jitter RNGd provides a source of sufficient entropy.

6kB5kBGPL-2.0 BSD-3-ClauseOpenWrt teamBug reportsSources
base-systemurandom-seed3libc, librt, libpthread, getrandom/etc/urandom.seed handling for OpenWrt

1kB0kBGPL-2.0-onlyOpenWrt teamBug reportsSources
base-systemuci2021-04-14-4b3db117-5libc, librt, libpthread, libuci20130104Utility for the Unified Configuration Interface (UCI)

8kB7kBLGPL-2.1Felix FietkauBug reportsSources
base-systemucert2020-05-24-00b921d8-1libc, librt, libpthread, usign, libubox20210516OpenWrt certificate verification utility

6kB5kBGPL-3.0+Daniel GolleBug reportsSources
base-systemucert-full2020-05-24-00b921d8-1libc, librt, libpthread, usign, libubox20210516, libjson-c5, libblobmsg-json20210516OpenWrt certificate generation and verification utility

8kB7kBGPL-3.0+Daniel GolleBug reportsSources
base-systemubusd2021-06-30-4fc532c8-2libc, librt, libpthread, libubox20210516, libblobmsg-json20210516OpenWrt RPC daemon

11kB11kBLGPL-2.1Felix FietkauBug reportsSources
base-systemubus2021-06-30-4fc532c8-2libc, librt, libpthread, libubus20210630, libblobmsg-json20210516, ubusdOpenWrt RPC client utility

7kB6kBLGPL-2.1Felix FietkauBug reportsSources
base-systemlibubus202106302021-06-30-4fc532c8-2libc, libubox20210516OpenWrt RPC client library

12kB11kBLGPL-2.1Felix FietkauBug reportsSources
base-systemlibubus202106302021-06-30-4fc532c8-2libc, libubox20210516OpenWrt RPC client library

12kB11kBLGPL-2.1Felix FietkauBug reportsSources
base-systemubox2020-10-25-9ef88681-2libc, librt, libpthread, libubox20210516, ubusd, ubus, libubus20210630, libuci20130104OpenWrt system helper toolbox

15kB14kBGPL-2.0John CrispinBug reportsSources
base-systemgetrandom2020-10-25-9ef88681-2libcOpenWrt getrandom system helper

2kB1kBGPL-2.0John CrispinBug reportsSources
base-systemlogd2020-10-25-9ef88681-2libc, libubox20210516, libubus20210630, libblobmsg-json20210516OpenWrt system log implementation

11kB10kBGPL-2.0John CrispinBug reportsSources
base-systemselinux-policy0.8libcBasic SELinux Security Policy designed specifically for
OpenWrt and written in Common Intermediate Language.

54kB53kBUnlicenseDominick GriftBug reportsSources
base-systemrpcd2022-02-19-8d26a1ba-1libc, libubus20210630, libubox20210516, libuci20130104, libblobmsg-json20210516, libjson-c5packages:pkgdata_owrt21_2:rpcd, This package provides the UBUS RPC backend server to expose various
functionality to frontend programs via JSON-RPC.

27kB26kBISCJo-Philipp Wichpackages:pkgdata_owrt21_2:rpcd, Bug reportspackages:pkgdata_owrt21_2:rpcd, Sources
base-systemrpcd-mod-rpcsys2022-02-19-8d26a1ba-1libc, libubus20210630, libubox20210516, rpcdProvides ubus calls for sysupgrade and password changing.

4kB3kBISCJo-Philipp WichBug reportsSources
base-systemrpcd-mod-file2022-02-19-8d26a1ba-1libc, libubus20210630, libubox20210516, rpcdProvides ubus calls for file and directory operations.

8kB7kBISCJo-Philipp WichBug reportsSources
base-systemrpcd2022-02-19-8d26a1ba-1libc, libubus20210630, libubox20210516, libuci20130104, libblobmsg-json20210516, libjson-c5This package provides the UBUS RPC backend server to expose various
functionality to frontend programs via JSON-RPC.

27kB26kBISCJo-Philipp WichBug reportsSources
base-systemrpcd-mod-iwinfo2022-02-19-8d26a1ba-1libc, libubus20210630, libubox20210516, rpcd, libiwinfo20210430Provides ubus calls for accessing iwinfo data.

8kB7kBISCJo-Philipp WichBug reportsSources
base-systemrefpolicy2.20200229-3libcThe SELinux Reference Policy project (refpolicy) is a
complete SELinux policy that can be used as the system
policy for a variety of systems and used as the basis for
creating other policies. Reference Policy was originally
based on the NSA example policy, but aims to accomplish many
additional goals.

The current refpolicy does not fully support OpenWRT and
needs modifications to work with the default system file
layout. These changes should be added as patches to the
refpolicy that modify a single SELinux policy.

The refpolicy works for the most part in permissive
mode. Only the basic set of utilities are enabled in the
example policy config and some of the pathing in the
policies is not correct. Individual policies would need to
be tweaked to get everything functioning properly.

791kB813kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
base-systemprocd2021-03-08-2cfc26f8-2libc, ubusd, ubus, libjson-script20210516, ubox, libubox20210516, libubus20210630, libblobmsg-json20210516, libjson-c5, jshnOpenWrt system process manager

55kB55kBGPL-2.0John CrispinBug reportsSources
base-systemprocd-selinux2021-03-08-2cfc26f8-2libc, ubusd, ubus, libjson-script20210516, ubox, libubox20210516, libubus20210630, libblobmsg-json20210516, libjson-c5, jshn, libselinuxOpenWrt system process manager with SELinux support

56kB55kBGPL-2.0John CrispinBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy