This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='utilities'

类别名称版本依赖包描述信息软件包体积安装后大小授权方式 维护人报告错误源代码
utilitiesdmidecode3.1-1libcpackages:pkgdata_owrt18_6:dmidecode, Dmidecode reports information about your system's hardware
as described in your system BIOS according to the SMBIOS/DMI
standard.

36kB36kBGPL-2.0Álvaro Fernández Rojaspackages:pkgdata_owrt18_6:dmidecode, Bug reportspackages:pkgdata_owrt18_6:dmidecode, Sources
utilitiesdump10904.0-1libc, librtlsdr, uhttpd, libncurses6packages:pkgdata:dump1090, Dump1090 is a Mode S decoder specifically designed for RTLSDR devices.

3162kB3169kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata:dump1090, Bug reportspackages:pkgdata:dump1090, Sources
utilitiesflashrom-spi1.2-2libcpackages:pkgdata:flashrom-spi, flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

80kB80kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata:flashrom-spi, Bug reportspackages:pkgdata:flashrom-spi, Sources
utilitiesflashrom-pci1.2-2libc, pciutilspackages:pkgdata:flashrom-pci, flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

94kB94kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata:flashrom-pci, Bug reportspackages:pkgdata:flashrom-pci, Sources
utilitiesflashrom1.0-2libc, libssp, libftdi1, libusb-1.0, libusb-compat, pciutilspackages:pkgdata_owrt18_6:flashrom, flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

96kB96kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata_owrt18_6:flashrom, Bug reportspackages:pkgdata_owrt18_6:flashrom, Sources
utilitiesflashrom-pci1.0-2libc, libssp, pciutilspackages:pkgdata_owrt18_6:flashrom-pci, flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

79kB78kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata_owrt18_6:flashrom-pci, Bug reportspackages:pkgdata_owrt18_6:flashrom-pci, Sources
utilitiesbcm27xx-userland97bc8180ad682b004ea22..7-1libcpackages:pkgdata:bcm27xx-userland, BCM27xx userland tools including vcgencmd and tvservice.

714kB715kBBSD-3-ClauseÁlvaro Fernández Rojaspackages:pkgdata:bcm27xx-userland, Bug reportspackages:pkgdata:bcm27xx-userland, Sources
utilitiesbcm27xx-eeprom47976e4409c6999a8e211..c-1libc, bcm27xx-userland, blkid, coreutils, coreutils-od, pciutils, python3-lightpackages:pkgdata:bcm27xx-eeprom, BCM27xx EEPROM tools.

3641kB3656kBBSD-3-Clause CustomÁlvaro Fernández Rojaspackages:pkgdata:bcm27xx-eeprom, Bug reportspackages:pkgdata:bcm27xx-eeprom, Sources
utilitiesftdi_eeprom1.5-2libc, librt, libpthread, confuse, libftdi1packages:pkgdata:ftdi_eeprom, ftdi_eeprom is a small tool for reading/erasing/flashing FTDI USB chip
eeproms. It uses libftdi to access the chip, so you will need to have
the required permissions on the device.

The ftdi_sio module should not be loaded.

You have to unplug and replug your device to get the new values to be
read. Otherwise, you will still get the old values.

8kB7kBLGPL-2.1-onlyÁlvaro Fernández Rojaspackages:pkgdata:ftdi_eeprom, Bug reportspackages:pkgdata:ftdi_eeprom, Sources
utilitiesflashrom1.2-2libc, libftdi1, libusb-1.0-0, pciutilspackages:pkgdata:flashrom, flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

111kB111kBGPL-2.0-or-laterÁlvaro Fernández Rojaspackages:pkgdata:flashrom, Bug reportspackages:pkgdata:flashrom, Sources
utilitiesdmidecode3.2-1libcpackages:pkgdata:dmidecode, Dmidecode reports information about your system's hardware
as described in your system BIOS according to the SMBIOS/DMI
standard.

39kB38kBGPL-2.0Álvaro Fernández Rojaspackages:pkgdata:dmidecode, Bug reportspackages:pkgdata:dmidecode, Sources
utilitiesview10904.0-1libc, libncurses6View1090 is a Mode S messages viewer for dump1090 devices.

36kB36kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom1.2-2libc, librt, libpthread, libftdi1, libusb-1.0-0, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

105kB105kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-usb1.2-2libc, librt, libpthread, libftdi1, libusb-1.0-0flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

94kB93kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-pci1.2-2libc, librt, libpthread, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

80kB79kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesdump10904.0-1libc, librt, libpthread, librtlsdr, uhttpd, libncurses6Dump1090 is a Mode S decoder specifically designed for RTLSDR devices.

3163kB3171kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesdmidecode3.2-1libcDmidecode reports information about your system's hardware
as described in your system BIOS according to the SMBIOS/DMI
standard.

40kB39kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesbcm27xx-userland97bc8180ad682b004ea22..7-1libcBCM27xx userland tools including vcgencmd and tvservice.

710kB712kBBSD-3-ClauseÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-spi1.2-2libc, librt, libpthreadflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

68kB68kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesbcm27xx-eeprom3129546271da09dde04da..7-1libc, bcm27xx-userland, blkid, coreutils, coreutils-od, pciutils, python3-lightBCM27xx EEPROM tools.

2337kB2346kBBSD-3-Clause CustomÁlvaro Fernández RojasBug reportsSources
utilitiestar1.32-3xz, libc, librt, libpthread, bzip2Tar is a program for packaging a set of files as a
single archive in tar format.

167kB167kBGPL-3.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesftdi_eeprom1.5-2libc, librt, libpthread, confuse, libftdi1ftdi_eeprom is a small tool for reading/erasing/flashing FTDI USB chip
eeproms. It uses libftdi to access the chip, so you will need to have
the required permissions on the device.

The ftdi_sio module should not be loaded.

You have to unplug and replug your device to get the new values to be
read. Otherwise, you will still get the old values.

8kB7kBLGPL-2.1-onlyÁlvaro Fernández RojasBug reportsSources
utilitiessumo1.8.0-1libc, librt, libpthread, libxerces-c, zlibSUMO is a free and open traffic simulation suite which is available since 2001.
SUMO allows modelling of intermodal traffic systems including road vehicles,
public transport and pedestrians. Included with SUMO is a wealth of supporting
tools which handle tasks such as route finding, visualization, network import
and emission calculation. SUMO can be enhanced with custom models and provides
various APIs to remotely control the simulation.

8357kB8379kBGPL-3.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesview10903.7.2-1libc, libssp, libncurses6View1090 is a Mode S messages viewer for dump1090 devices.

34kB34kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiestar1.32-2xz, libc, libssp, bzip2Tar is a program for packaging a set of files as a
single archive in tar format.

165kB164kBGPL-3.0Álvaro Fernández RojasBug reportsSources
utilitiessumo1.3.1-1libc, libssp, libxerces-c, zlibSUMO is a free and open traffic simulation suite which is available since 2001.
SUMO allows modelling of intermodal traffic systems including road vehicles,
public transport and pedestrians. Included with SUMO is a wealth of supporting
tools which handle tasks such as route finding, visualization, network import
and emission calculation. SUMO can be enhanced with custom models and provides
various APIs to remotely control the simulation.

7340kB7350kBGPL-3.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesftdi_eeprom1.4-7libc, confuse, libftdi1ftdi_eeprom is a small tool for reading/erasing/flashing FTDI USB chip
eeproms. It uses libftdi to access the chip, so you will need to have
the required permissions on the device.

The ftdi_sio module should not be loaded.

You have to unplug and replug your device to get the new values to be
read. Otherwise, you will still get the old values.

7kB6kBLGPL-2.1-onlyÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom1.0-2libc, libftdi1, libusb-1.0-0, libusb-compat4, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

98kB97kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-usb1.0-2libc, libftdi1, libusb-1.0-0, libusb-compat4flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

87kB86kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-spi1.0-2libc, libsspflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

61kB60kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-pci1.0-2libc, libssp, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

71kB71kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesdump10903.7.2-1libc, libssp, librtlsdr, uhttpd, libncurses6Dump1090 is a Mode S decoder specifically designed for RTLSDR devices.

2162kB2169kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesdmidecode3.2-1libcDmidecode reports information about your system's hardware
as described in your system BIOS according to the SMBIOS/DMI
standard.

40kB39kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesview10902017-06-01-1libc, libssp, libpthreadView1090 is a Mode S messages viewer for dump1090 devices.

31kB30kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiestar1.32-1xz, libc, bzip2Tar is a program for packaging a set of files as a
single archive in tar format.

176kB175kBGPL-3.0Álvaro Fernández RojasBug reportsSources
utilitiessumo0.27.1-1libc, libssp, libstdcpp, libxerces-cSUMO is a free and open traffic simulation suite which is available since 2001.
SUMO allows modelling of intermodal traffic systems including road vehicles,
public transport and pedestrians. Included with SUMO is a wealth of supporting
tools which handle tasks such as route finding, visualization, network import
and emission calculation. SUMO can be enhanced with custom models and provides
various APIs to remotely control the simulation.

4323kB4328kBGPL-3.0Álvaro Fernández RojasBug reportsSources
utilitiespciutils3.5.6-1libc, libkmod, zlibcontains collection of programs for inspecting and manipulating configuration
of PCI devices

306kB305kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesflashrom1.0-2libc, libssp, libftdi1, libusb-1.0, libusb-compat, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

96kB96kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-usb1.0-2libc, libssp, libftdi1, libusb-1.0, libusb-compatflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

78kB78kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-spi1.0-2libc, libsspflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

61kB60kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-pci1.0-2libc, libssp, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

79kB78kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesdump10902017-06-01-1libc, libpthread, librtlsdr, uhttpdDump1090 is a Mode S decoder specifically designed for RTLSDR devices.

687kB693kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesdmidecode3.1-1libcDmidecode reports information about your system's hardware
as described in your system BIOS according to the SMBIOS/DMI
standard.

36kB36kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesftdi_eeprom1.4-1libc, confuse, libftdi1ftdi_eeprom is a small tool for reading/erasing/flashing FTDI USB chip
eeproms. It uses libftdi to access the chip, so you will need to have
the required permissions on the device.

The ftdi_sio module should not be loaded.

You have to unplug and replug your device to get the new values to be
read. Otherwise, you will still get the old values.

7kB6kBLGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesbcm27xx-userland97bc8180ad682b004ea22..7-1libcBCM27xx userland tools including vcgencmd and tvservice.

714kB715kBBSD-3-ClauseÁlvaro Fernández RojasBug reportsSources
utilitiesbcm27xx-eeprom47976e4409c6999a8e211..c-1libc, bcm27xx-userland, blkid, coreutils, coreutils-od, pciutils, python3-lightBCM27xx EEPROM tools.

3641kB3656kBBSD-3-Clause CustomÁlvaro Fernández RojasBug reportsSources
utilitiesview10904.0-1libc, librt, libpthread, libncurses6View1090 is a Mode S messages viewer for dump1090 devices.

36kB35kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiestar1.34-1xz, libc, bzip2Tar is a program for packaging a set of files as a
single archive in tar format.

181kB180kBGPL-3.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiessumo1.12.0-1libc, librt, libpthread, libxerces-c, zlibSUMO is a free and open traffic simulation suite which is available since 2001.
SUMO allows modelling of intermodal traffic systems including road vehicles,
public transport and pedestrians. Included with SUMO is a wealth of supporting
tools which handle tasks such as route finding, visualization, network import
and emission calculation. SUMO can be enhanced with custom models and provides
various APIs to remotely control the simulation.

7418kB7436kBGPL-3.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesftdi_eeprom1.5-2libc, librt, libpthread, confuse, libftdi1ftdi_eeprom is a small tool for reading/erasing/flashing FTDI USB chip
eeproms. It uses libftdi to access the chip, so you will need to have
the required permissions on the device.

The ftdi_sio module should not be loaded.

You have to unplug and replug your device to get the new values to be
read. Otherwise, you will still get the old values.

8kB7kBLGPL-2.1-onlyÁlvaro Fernández RojasBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy