This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='utilities'

类别名称版本依赖包描述信息软件包体积安装后大小授权方式 维护人报告错误源代码
utilitiesflashrom1.2-2libc, libftdi1, libusb-1.0-0, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

111kB111kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-usb1.2-2libc, libftdi1, libusb-1.0-0flashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

99kB98kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-spi1.2-2libcflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

80kB80kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesflashrom-pci1.2-2libc, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

94kB94kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesdump10904.0-1libc, librtlsdr, uhttpd, libncurses6Dump1090 is a Mode S decoder specifically designed for RTLSDR devices.

3162kB3169kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesdmidecode3.2-1libcDmidecode reports information about your system's hardware
as described in your system BIOS according to the SMBIOS/DMI
standard.

39kB38kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesview10902016-11-26-1libc, libpthreadView1090 is a Mode S messages viewer for dump1090 devices.

31kB30kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiestar1.29-3xz, libc, bzip2Tar is a program for packaging a set of files as a
single archive in tar format.

165kB164kBGPL-3.0Álvaro Fernández RojasBug reportsSources
utilitiessumo0.27.1-1libc, libssp, libstdcpp, libxerces-cSUMO is a free and open traffic simulation suite which is available since 2001.
SUMO allows modelling of intermodal traffic systems including road vehicles,
public transport and pedestrians. Included with SUMO is a wealth of supporting
tools which handle tasks such as route finding, visualization, network import
and emission calculation. SUMO can be enhanced with custom models and provides
various APIs to remotely control the simulation.

4329kB4335kBGPL-3.0Álvaro Fernández RojasBug reportsSources
utilitiespciutils3.5.2-1libc, libssp, libkmod, zlibcontains collection of programs for inspecting and manipulating configuration
of PCI devices

291kB290kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesftdi_eeprom1.3-1libc, libssp, confuse, libftdi1ftdi_eeprom is a small tool for reading/erasing/flashing FTDI USB chip
eeproms. It uses libftdi to access the chip, so you will need to have
the required permissions on the device.

The ftdi_sio module should not be loaded.

You have to unplug and replug your device to get the new values to be
read. Otherwise, you will still get the old values.

7kB6kBLGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesflashrom0.9.9-2libc, libftdi1, libusb-1.0, libusb-compat, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

97kB97kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesflashrom-spi0.9.9-2libcflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

57kB57kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesflashrom-pci0.9.9-2libc, pciutilsflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

77kB77kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesdump10902016-11-26-1libc, libpthread, librtlsdr, uhttpdDump1090 is a Mode S decoder specifically designed for RTLSDR devices.

687kB693kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesdmidecode3.0-3libcDmidecode reports information about your system's hardware
as described in your system BIOS according to the SMBIOS/DMI
standard.

34kB33kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesflashrom-usb0.9.9-2libc, libftdi1, libusb-1.0, libusb-compatflashrom is an utility for identifying, reading, writing, verifying
and erasing flash chips. It's often used to flash BIOS/EFI/coreboot
/firmware images.

77kB76kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiespcsc-tools1.5.7-1libc, libpcsclitepackages:pkgdata:pcsc-tools, Tools that are used to test a PC/SC driver, card or reader.
Only includes pcsc_scan without ATR analysis for now.

6kB5kBGPL-2.0-or-latercommon packages maintainerspackages:pkgdata:pcsc-tools, Bug reportspackages:pkgdata:pcsc-tools, Sources
utilitiesfindutils-locate4.9.0-1libcpackages:pkgdata:findutils-locate, GNU Find Utilities - locate and updatedb utility

73kB72kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:findutils-locate, Bug reportspackages:pkgdata:findutils-locate, Sources
utilitiesdbus1.13.18-12libc, libexpat, libdbuspackages:pkgdata:dbus, Simple interprocess messaging system (daemon)

117kB116kBAFL-2.1common packages maintainerspackages:pkgdata:dbus, Bug reportspackages:pkgdata:dbus, Sources
utilitiesbonniexx2.00a-1libc, librt, libpthread, libstdcpp6packages:pkgdata:bonniexx, Bonnie++ is a benchmark suite that is aimed at performing a number of simple
tests of hard drive and file system performance.

21kB20kBGPL-2.0common packages maintainerspackages:pkgdata:bonniexx, Bug reportspackages:pkgdata:bonniexx, Sources
utilitiesprocps-ng-watch3.3.16-3libc, librt, libpthread, procps-ngpackages:pkgdata:procps-ng-watch, Installs the applet watch.

8kB7kBGPL-2.0-or-latercommon packages maintainerspackages:pkgdata:procps-ng-watch, Bug reportspackages:pkgdata:procps-ng-watch, Sources
utilitiesfindutils4.9.0-1libc, findutils-find, findutils-xargs, findutils-locatepackages:pkgdata:findutils, GNU Find Utilities (all)

0kB0kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:findutils, Bug reportspackages:pkgdata:findutils, Sources
utilitiesfindutils-find4.9.0-1libc, librt, libpthreadpackages:pkgdata:findutils-find, GNU Find Utilities - find utility

96kB95kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:findutils-find, Bug reportspackages:pkgdata:findutils-find, Sources
utilitiesdbus-utils1.13.18-12libc, dbuspackages:pkgdata:dbus-utils, Simple interprocess messaging system (utilities)

17kB17kBAFL-2.1common packages maintainerspackages:pkgdata:dbus-utils, Bug reportspackages:pkgdata:dbus-utils, Sources
utilitieshaserl0.9.36-1libcpackages:pkgdata:haserl, A CGI wrapper to embed shell scripts in HTML documents

12kB11kBGPL-2.0common packages maintainerspackages:pkgdata:haserl, Bug reportspackages:pkgdata:haserl, Sources
utilitiesusbids0.359-1libcUSB ID list

245kB245kBGPL-2.0-or-later XFree86-1.0common packages maintainersBug reportsSources
utilitiessispmctl4.8-1libc, libsispmctlThe sispmctl tool can control Gembird SIS-PM Silver Shield
programmable power outlet strips (also known under the name
Revolt Intelli-Plug) from the command line.
.
It can be used to switch on or off any of the programmable
power sockets of the SIS-PM via USB. It can also show the
current status of each power socket, and it can handle
multiple SIS-PM devices, too.

7kB6kBGPL-2.0-or-latercommon packages maintainersBug reportsSources
utilitiesshadow4.8.1-3libc, librt, libpthread, shadow-chage, shadow-chfn, shadow-chgpasswd, shadow-chpasswd, shadow-chsh, shadow-expiry, shadow-faillog, shadow-gpasswd, shadow-groupadd, shadow-groupdel, shadow-groupmems, shadow-groupmod, shadow-groups, shadow-grpck, shadow-grpconv, shadow-grpunconv, shadow-lastlog, shadow-login, shadow-logoutd, shadow-newgidmap, shadow-newgrp, shadow-newuidmap, shadow-newusers, shadow-nologin, shadow-passwd, shadow-pwck, shadow-pwconv, shadow-pwunconv, shadow-su, shadow-useradd, shadow-userdel, shadow-usermod, shadow-vipwFull versions of standard shadow utilities. Normally, you would not
use this package, since the functionality in BusyBox is more than
sufficient and much smaller.

1kB0kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-vipw4.8.1-3libc, shadow-commonFull version of standard vipw utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

18kB17kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-utils4.8.1-3libc, librt, libpthreadFull versions of standard shadow utilities. Normally, you would not
use this package, since the functionality in BusyBox is more than
sufficient and much smaller.

0kB0kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-usermod4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard usermod utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

31kB31kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-userdel4.8.1-3libc, shadow-commonFull version of standard userdel utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

24kB24kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-useradd4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard useradd utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

33kB32kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-pwunconv4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard pwunconv utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

12kB11kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-pwconv4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard pwconv utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

13kB12kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-pwck4.8.1-3libc, shadow-commonFull version of standard pwck utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

15kB15kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-passwd4.8.1-3libc, shadow-commonFull version of standard passwd utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

56kB56kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-nologin4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard nologin utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

2kB2kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-newusers4.8.1-3libc, shadow-commonFull version of standard newusers utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

62kB62kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-newgrp4.8.1-3libc, shadow-commonFull version of standard newgrp utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

46kB46kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-newgidmap4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard newgidmap utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

11kB10kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-logoutd4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard logoutd utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

4kB4kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-grpunconv4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard grpunconv utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

14kB13kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-grpconv4.8.1-3libc, shadow-commonFull version of standard grpconv utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

15kB14kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-grpck4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard grpck utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

15kB15kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-groups4.8.1-3libc, shadow-commonFull version of standard groups utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

3kB2kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-groupmod4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard groupmod utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

20kB19kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-groupmems4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard groupmems utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

15kB15kBBSD-3-Clausecommon packages maintainersBug reportsSources
utilitiesshadow-gpasswd4.8.1-3libc, librt, libpthread, shadow-commonFull version of standard gpasswd utility. Normally, you would not use this
package, since the functionality in BusyBox is more than sufficient.

58kB58kBBSD-3-Clausecommon packages maintainersBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy