软件包列表
软件包分类
点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。
软件包列表
为了不影响您的体验,每页只显示50个软件包。
- 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
- 点击表头可对按对应字段对内容进行排序。
- 在
反白框输入您的筛选条件。
当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。
Filtered by categories='network---routing-and-redirection'
| 类别 | 名称 | 版本 | 依赖包 | 描述信息 | 软件包体积 | 安装后大小 | ↑ 授权方式 | 维护人 | 报告错误 | 源代码 |
|---|---|---|---|---|---|---|---|---|---|---|
| network---routing-and-redirection | babeld | 1.12.2-1 | libc, libubus20220601, libubox20220515 | packages:pkgdata:babeld, Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). | 68kB | 67kB | MIT | Gabriel Kerneis, Baptiste Jonglez, Nick Hainke, | packages:pkgdata:babeld, Bug reports | packages:pkgdata:babeld, Sources |
| network---routing-and-redirection | prince | v0.4-2 | libc, librt, libpthread, libjson-c5 | Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. | 27kB | 26kB | MIT | common routing maintainers | Bug reports | Sources |
| network---routing-and-redirection | babeld | 1.12.2-1 | libc, libubus20210630, libubox20210516 | Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). | 69kB | 68kB | MIT | Gabriel Kerneis, Baptiste Jonglez, Nick Hainke, | Bug reports | Sources |
| network---routing-and-redirection | prince | v0.4-1 | libc, libssp, libjson-c2, libpthread | Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. | 26kB | 26kB | MIT | common routing maintainers | Bug reports | Sources |
| network---routing-and-redirection | babeld | 1.9.2-1 | libc, libssp | Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is in the process of becoming an IETF Standard. | 49kB | 48kB | MIT | Gabriel Kerneis, Baptiste Jonglez, | Bug reports | Sources |
| network---routing-and-redirection | prince | v0.4-1 | libc, libjson-c, libpthread | Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. | 28kB | 27kB | MIT | common routing maintainers | Bug reports | Sources |
| network---routing-and-redirection | babeld | 1.8.5-1 | libc | Babel is a loop-avoiding distance-vector routing protocol roughly based on DSDV and AODV, but with provisions for link cost estimation and redistribution of routes from other routing protocols. While it is optimised for wireless mesh networks, Babel will also work efficiently on wired networks. It will generate between 1.2 and 2.4 times the amount of routing traffic that RIPng would generate, while never counting to infinity. | 55kB | 54kB | MIT | Gabriel Kerneis, Baptiste Jonglez, | Bug reports | Sources |
| network---routing-and-redirection | prince | 0.4-3 | libc, librt, libpthread, libjson-c5 | Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. | 26kB | 25kB | MIT | Gabriele Gemmi | Bug reports | Sources |
| network---routing-and-redirection | babeld | 1.12.2-1 | libc, libubus20220601, libubox20220515 | Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). | 68kB | 67kB | MIT | Gabriel Kerneis, Baptiste Jonglez, Nick Hainke, | Bug reports | Sources |
| network---routing-and-redirection | babeld | 1.8.0-3 | libc, libssp | Babel is a loop-avoiding distance-vector routing protocol roughly based on DSDV and AODV, but with provisions for link cost estimation and redistribution of routes from other routing protocols. While it is optimised for wireless mesh networks, Babel will also work efficiently on wired networks. It will generate between 1.2 and 2.4 times the amount of routing traffic that RIPng would generate, while never counting to infinity. | 48kB | 47kB | MIT | Gabriel Kerneis, Baptiste Jonglez, | Bug reports | Sources |
| network---routing-and-redirection | prince | v0.4-1 | libc, libssp, libjson-c, libpthread | Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. | 24kB | 23kB | MIT | common routing maintainers | Bug reports | Sources |
| network---routing-and-redirection | yggdrasil | 0.4.3-1 | libc, kmod-tun, dkjson, libuci-lua | Yggdrasil builds end-to-end encrypted networks with IPv6. Beyond the similarities with cjdns is a different routing algorithm. This globally-agreed spanning tree uses greedy routing in a metric space. Back-pressure routing techniques allow advanced link aggregation bonding on per-stream basis. In turn, a single stream will span across multiple network interfaces simultaneously with much greater throughput. | 2942kB | 2946kB | LGPL-3.0-only | William Fleurant | Bug reports | Sources |
| network---routing-and-redirection | yggdrasil | 0.4.0-1 | libc, kmod-tun, dkjson, libuci-lua | Yggdrasil builds end-to-end encrypted networks with IPv6. Beyond the similarities with cjdns is a different routing algorithm. This globally-agreed spanning tree uses greedy routing in a metric space. Back-pressure routing techniques allow advanced link aggregation bonding on per-stream basis. In turn, a single stream will span across multiple network interfaces simultaneously with much greater throughput. | 3254kB | 3263kB | LGPL-3.0-only | William Fleurant | Bug reports | Sources |
| network---routing-and-redirection | yggdrasil | 0.4.3-1 | libc, kmod-tun, dkjson, libuci-lua | Yggdrasil builds end-to-end encrypted networks with IPv6. Beyond the similarities with cjdns is a different routing algorithm. This globally-agreed spanning tree uses greedy routing in a metric space. Back-pressure routing techniques allow advanced link aggregation bonding on per-stream basis. In turn, a single stream will span across multiple network interfaces simultaneously with much greater throughput. | 3000kB | 3005kB | LGPL-3.0-only | William Fleurant | Bug reports | Sources |
| network---routing-and-redirection | lldpd | 1.0.7-1 | libc, libevent2-7 | LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver Link-Layer notifications to adjacent network devices. | 148kB | 147kB | ISC | Stijn Tintel | Bug reports | Sources |
| network---routing-and-redirection | lldpd | 1.0.3-1 | libc, libssp, libevent2-7 | LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver Link-Layer notifications to adjacent network devices. | 107kB | 106kB | ISC | Stijn Tintel | Bug reports | Sources |
| network---routing-and-redirection | lldpd | 1.0.1-1 | libc, libevent2 | LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver Link-Layer notifications to adjacent network devices. | 130kB | 129kB | ISC | Stijn Tintel | Bug reports | Sources |
| network---routing-and-redirection | lldpd | 1.0.13-3 | libc, libcap, libevent2-7 | LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver Link-Layer notifications to adjacent network devices. | 124kB | 123kB | ISC | Stijn Tintel | Bug reports | Sources |
| network---routing-and-redirection | lldpd | 0.9.7-1 | libc, libssp, libevent2 | LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver Link-Layer notifications to adjacent network devices. | 107kB | 106kB | ISC | Stijn Tintel | Bug reports | Sources |
| network---routing-and-redirection | mwan3 | 2.6.18-1 | libc, ip, ipset, iptables, iptables-mod-conntrack-extra, iptables-mod-ipopt, jshn | Hotplug script which makes configuration of multiple WAN interfaces simple and manageable. With loadbalancing/failover support for up to 250 wan interfaces, connection tracking and an easy to manage traffic ruleset. | 11kB | 11kB | GPLv2 | Florian Eckert | Bug reports | Sources |
| network---routing-and-redirection | mwan3 | 2.0.2-1 | libc, libssp, ip, ipset, iptables, iptables-mod-conntrack-extra, iptables-mod-ipopt | Hotplug script which makes configuration of multiple WAN interfaces simple and manageable. With loadbalancing/failover support for up to 250 wan interfaces, connection tracking and an easy to manage traffic ruleset. | 7kB | 6kB | GPLv2 | Florian Eckert | Bug reports | Sources |
| network---routing-and-redirection | cjdns | v21.1-4 | libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 | packages:pkgdata:cjdns, Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. | 393kB | 392kB | GPL-3.0-or-later | William Fleurant | packages:pkgdata:cjdns, Bug reports | packages:pkgdata:cjdns, Sources |
| network---routing-and-redirection | cjdns-tests | v21.1-4 | libc, libpthread, librt | packages:pkgdata:cjdns-tests, cjdns test cases | 332kB | 332kB | GPL-3.0-or-later | William Fleurant | packages:pkgdata:cjdns-tests, Bug reports | packages:pkgdata:cjdns-tests, Sources |
| network---routing-and-redirection | cjdns | v21.1-4 | libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 | Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. | 396kB | 396kB | GPL-3.0-or-later | William Fleurant | Bug reports | Sources |
| network---routing-and-redirection | cjdns-tests | v21.1-4 | libc, libpthread, librt | cjdns test cases | 336kB | 336kB | GPL-3.0-or-later | William Fleurant | Bug reports | Sources |
| network---routing-and-redirection | tcpproxy | 1.2-3 | libc, librt, libpthread | tcpproxy is a simple tcp connection proxy which combines the features of rinetd and 6tunnel. tcpproxy supports IPv4 and IPv6 and also supports connections from IPv6 to IPv4 endpoints and vice versa. | 18kB | 17kB | GPL-3.0-or-later | Christian Pointner | Bug reports | Sources |
| network---routing-and-redirection | tcpproxy | 1.2-3 | libc | tcpproxy is a simple tcp connection proxy which combines the features of rinetd and 6tunnel. tcpproxy supports IPv4 and IPv6 and also supports connections from IPv6 to IPv4 endpoints and vice versa. | 17kB | 16kB | GPL-3.0-or-later | Christian Pointner | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird1-ipv6 | 0.3-5 | libc, luci-base, luci-compat, bird1-ipv6-uci | LuCI support for BIRD (v1.6) (IPv6) | 8kB | 7kB | GPL-3.0-or-later | Roger Pueyo Centelles | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird1-ipv4 | 0.3-5 | libc, luci-base, luci-compat, bird1-ipv4-uci | LuCI support for BIRD (v1.6) (IPv4) | 8kB | 7kB | GPL-3.0-or-later | Roger Pueyo Centelles | Bug reports | Sources |
| network---routing-and-redirection | bird1-ipv6-uci | 0.3-5 | libc, libuci20130104, uci, bird1-ipv6 | The BIRD UCI module (v1.6) (IPv6) | 6kB | 5kB | GPL-3.0-or-later | Roger Pueyo Centelles | Bug reports | Sources |
| network---routing-and-redirection | bird1-ipv4-uci | 0.3-5 | libc, libuci20130104, uci, bird1-ipv4 | The BIRD UCI module (v1.6) (IPv4) | 7kB | 6kB | GPL-3.0-or-later | Roger Pueyo Centelles | Bug reports | Sources |
| network---routing-and-redirection | tcpproxy | 1.2-4 | libc | tcpproxy is a simple tcp connection proxy which combines the features of rinetd and 6tunnel. tcpproxy supports IPv4 and IPv6 and also supports connections from IPv6 to IPv4 endpoints and vice versa. | 19kB | 18kB | GPL-3.0-or-later | Christian Pointner | Bug reports | Sources |
| network---routing-and-redirection | cjdns | v21.1-4 | libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 | Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. | 393kB | 392kB | GPL-3.0-or-later | William Fleurant | Bug reports | Sources |
| network---routing-and-redirection | cjdns-tests | v21.1-4 | libc, libpthread, librt | cjdns test cases | 332kB | 332kB | GPL-3.0-or-later | William Fleurant | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird1-ipv6 | 0.3-1 | libc, bird1-ipv6-uci, luci-base | bird6 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | bird1-ipv4-uci | 0.3-1 | libc, librt, libpthread, bird1-ipv4, libuci20130104, uci | bird1-ipv4 UCI integration module | 7kB | 6kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird1-ipv4 | 0.3-1 | libc, librt, libpthread, bird1-ipv4-uci, luci-base | bird4 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | bird1-ipv6-uci | 0.3-1 | libc, librt, libpthread, bird1-ipv6, libuci20130104, uci | bird1-ipv6 UCI integration module | 6kB | 5kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird1-ipv6 | 0.3-1 | libc, bird1-ipv6-uci, luci-base | bird6 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird1-ipv4 | 0.3-1 | libc, libssp, bird1-ipv4-uci, luci-base | bird4 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | bird1-ipv6-uci | 0.3-1 | libc, bird1-ipv6, libuci20130104, uci | bird1-ipv6 UCI integration module | 6kB | 5kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | bird1-ipv4-uci | 0.3-1 | libc, bird1-ipv4, libuci20130104, uci | bird1-ipv4 UCI integration module | 7kB | 6kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | tcpproxy | 1.2-2 | libc, libssp | tcpproxy is a simple tcp connection proxy which combines the features of rinetd and 6tunnel. tcpproxy supports IPv4 and IPv6 and also supports connections from IPv6 to IPv4 endpoints and vice versa. | 16kB | 15kB | GPL-3.0+ | Christian Pointner | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird6 | 0.3-1 | libc, bird6-uci, luci-base | bird6 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird4 | 0.3-1 | libc, bird4-uci, luci-base | bird4 application for LuCI | 7kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | bird6-uci | 0.3-1 | libc, bird6, libuci, uci | bird6 UCI integration module | 6kB | 5kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | bird4-uci | 0.3-1 | libc, bird4, libuci, uci | bird4 UCI integration module | 7kB | 6kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird6 | 0.3-1 | libc, bird6-uci, luci-base | bird6 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird4 | 0.3-1 | libc, libssp, bird4-uci, luci-base | bird4 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | bird6-uci | 0.3-1 | libc, bird6, libuci, uci | bird6 UCI integration module | 6kB | 5kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| Next page | ||||||||||