软件包列表
软件包分类
点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。
软件包列表
为了不影响您的体验,每页只显示50个软件包。
- 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
- 点击表头可对按对应字段对内容进行排序。
- 在
反白框输入您的筛选条件。
当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。
Filtered by categories='firmware---ath10k-board-specific-overrides'
| 类别 | 名称 | 版本 | 依赖包 | 描述信息 | 软件包体积 | 安装后大小 | ↑ 授权方式 | 维护人 | 报告错误 | 源代码 |
|---|---|---|---|---|---|---|---|---|---|---|
| firmware---ath10k-board-specific-overrides | ipq-wifi-nec_wg2600hp3 | 1 | libc | packages:pkgdata:ipq-wifi-nec_wg2600hp3, The NEC Platforms WG2600HP3 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the NEC Platforms WG2600HP3. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-nec_wg2600hp3, Bug reports | packages:pkgdata:ipq-wifi-nec_wg2600hp3, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-teltonika_rutx | 1 | libc | packages:pkgdata:ipq-wifi-teltonika_rutx, The Teltonika RUTX requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Teltonika RUTX. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-teltonika_rutx, Bug reports | packages:pkgdata:ipq-wifi-teltonika_rutx, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_emd1 | 1 | libc | packages:pkgdata:ipq-wifi-engenius_emd1, The EnGenius EMD1 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EMD1. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-engenius_emd1, Bug reports | packages:pkgdata:ipq-wifi-engenius_emd1, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-aruba_ap-365 | 1 | libc | packages:pkgdata:ipq-wifi-aruba_ap-365, The Aruba AP-365 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Aruba AP-365. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-aruba_ap-365, Bug reports | packages:pkgdata:ipq-wifi-aruba_ap-365, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-plasmacloud_pa1200 | 1 | libc | packages:pkgdata:ipq-wifi-plasmacloud_pa1200, The Plasma Cloud PA1200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Plasma Cloud PA1200. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-plasmacloud_pa1200, Bug reports | packages:pkgdata:ipq-wifi-plasmacloud_pa1200, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac-c1 | 1 | libc | packages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, The Qxwlan E2600AC C1 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC C1. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, Bug reports | packages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_eap2200 | 1 | libc | packages:pkgdata:ipq-wifi-engenius_eap2200, The EnGenius EAP2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EAP2200. Do not install it for any other device! | 5kB | 4kB | OpenWrt team | packages:pkgdata:ipq-wifi-engenius_eap2200, Bug reports | packages:pkgdata:ipq-wifi-engenius_eap2200, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-dlink_dap2610 | 1 | libc | packages:pkgdata:ipq-wifi-dlink_dap2610, The D-Link DAP-2610 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the D-Link DAP-2610. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-dlink_dap2610, Bug reports | packages:pkgdata:ipq-wifi-dlink_dap2610, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-devolo_magic-2-wifi-next | 1 | libc | packages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, The devolo Magic 2 WiFi next requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the devolo Magic 2 WiFi next. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, Bug reports | packages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-asus_rt-ac42u | 1 | libc | packages:pkgdata:ipq-wifi-asus_rt-ac42u, The ASUS RT-AC42U requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the ASUS RT-AC42U. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-asus_rt-ac42u, Bug reports | packages:pkgdata:ipq-wifi-asus_rt-ac42u, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-mobipromo_cm520-79f | 1 | libc | packages:pkgdata:ipq-wifi-mobipromo_cm520-79f, The MobiPromo CM520-79F requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the MobiPromo CM520-79F. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-mobipromo_cm520-79f, Bug reports | packages:pkgdata:ipq-wifi-mobipromo_cm520-79f, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac | 1 | libc | The Qxwlan E2600AC requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-plasmacloud_pa2200 | 1 | libc | The Plasma Cloud PA2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Plasma Cloud PA2200. Do not install it for any other device! | 5kB | 4kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-plasmacloud_pa1200 | 1 | libc | The Plasma Cloud PA1200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Plasma Cloud PA1200. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-nec_wg2600hp3 | 1 | libc | The NEC Platforms WG2600HP3 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the NEC Platforms WG2600HP3. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-mobipromo_cm520-79f | 1 | libc | The MobiPromo CM520-79F requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the MobiPromo CM520-79F. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-mikrotik_sxtsq-5-ac | 1 | libc | The MikroTik SXTsq 5 ac requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the MikroTik SXTsq 5 ac. Do not install it for any other device! | 3kB | 1kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-luma_wrtq-329acn | 1 | libc | The Luma WRTQ-329ACN requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Luma WRTQ-329ACN. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-linksys_ea8300 | 1 | libc | The Linksys EA8300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Linksys EA8300. Do not install it for any other device! | 7kB | 6kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-glinet_gl-s1300 | 1 | libc | The GL.iNet GL-S1300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the GL.iNet GL-S1300. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-glinet_gl-ap1300 | 1 | libc | The GL.iNet GL-AP1300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the GL.iNet GL-AP1300. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-ezviz_cs-w3-wd1200g-eup | 1 | libc | The EZVIZ CS-W3-WD1200G EUP requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EZVIZ CS-W3-WD1200G EUP. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_emd1 | 1 | libc | The EnGenius EMD1 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EMD1. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_eap2200 | 1 | libc | The EnGenius EAP2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EAP2200. Do not install it for any other device! | 5kB | 4kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-edgecore_ecw5410 | 1 | libc | The Edgecore ECW5410 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Edgecore ECW5410. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-dlink_dap2610 | 1 | libc | The D-Link DAP-2610 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the D-Link DAP-2610. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-devolo_magic-2-wifi-next | 1 | libc | The devolo Magic 2 WiFi next requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the devolo Magic 2 WiFi next. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-cellc_rtl30vw | 1 | libc | The Cell C RTL30VW requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Cell C RTL30VW. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-buffalo_wtr-m2133hp | 1 | libc | The Buffalo WTR-M2133HP requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Buffalo WTR-M2133HP. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-avm_fritzrepeater-1200 | 1 | libc | The AVM FRITZRepeater 1200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the AVM FRITZRepeater 1200. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-aruba_ap-303 | 1 | libc | The Aruba AP-303 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Aruba AP-303. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac-c1 | 1 | libc | The Qxwlan E2600AC C1 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC C1. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-glinet_gl-b2200 | 1 | libc | The GL.iNet GL-B2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the GL.iNet GL-B2200. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-8dev_habanero-dvk | 1 | libc | The 8devices Habanero DVK requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the 8devices Habanero DVK. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-asus_rt-ac42u | 1 | libc | The ASUS RT-AC42U requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the ASUS RT-AC42U. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_emr3500 | 1 | libc | The EnGenius EMR3500 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EMR3500. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-zte_mf286d | 1 | libc | The ZTE MF286D requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the ZTE MF286D. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-edgecore_oap100 | 1 | libc | The Edgecore OAP100 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Edgecore OAP100. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-p2w_r619ac | 1 | libc | The P&W R619AC requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the P&W R619AC. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-aruba_ap-365 | 1 | libc | The Aruba AP-365 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Aruba AP-365. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-mikrotik_hap-ac2 | 1 | libc | The Mikrotik hAP ac2 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Mikrotik hAP ac2. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-teltonika_rutx | 1 | libc | The Teltonika RUTX requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Teltonika RUTX. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac-c2 | 1 | libc | The Qxwlan E2600AC C2 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC C2. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-linksys_mr8300-v0 | 1 | libc | The Linksys MR8300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Linksys MR8300. Do not install it for any other device! | 5kB | 4kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac | 1 | libc | The Qxwlan E2600AC requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_ens620ext | 1 | libc | The EnGenius ENS620EXT requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius ENS620EXT. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_eap1300 | 1 | libc | The EnGenius EAP1300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EAP1300. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-asus_map-ac2200 | 1 | libc | The ASUS MAP-AC2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the ASUS MAP-AC2200. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-alfa-network_ap120c-ac | 1 | libc | The ALFA Network AP120C-AC requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the ALFA Network AP120C-AC. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac | 1 | libc | The Qxwlan E2600AC requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| Next page | ||||||||||