This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='utilities'

类别名称版本依赖包描述信息软件包体积安装后大小 授权方式维护人报告错误源代码
utilitiestaskwarrior2.5.1-1libc, librt, libpthread, libstdcpp6, libuuid1, libgnutlstaskwarrior is a command-line todo list manager

429kB429kBMITcommon packages maintainersBug reportsSources
utilitiestelegraf-full1.23.4-1libcTelegraf is a plugin-driven agent for collecting and sending metrics and events.
It supports various inputs (including prometheus endpoints) and is able to send data into InfluxDB.
(Full build. including all plugins)

35391kB35940kBMITJonathan PagelBug reportsSources
utilitiesyq4.30.8-1libcThe aim of the project is to be the jq or sed of yaml files.

3115kB3122kBMITTianling ShenBug reportsSources
utilitiesctop0.7.5-1libcTop-like interface for container metrics

4103kB4113kBMITJavier MarcetBug reportsSources
utilitiesbluld1.1.2-1libc, kmod-usb-hid, kmod-leds-uleds, libstdcpp6, hidapiA daemon to expose a Blinkstick to the Linux kernel LED class via /dev/uleds. (Kernel 4.10+ required.)

29kB29kBMITKeith T. GarnerBug reportsSources
utilitiesmhz2023-06-17-11aac239-1libc, librt, libpthreadTool to mathematically calculate the current CPU frequency.

3kB2kBMITRobert MarkoBug reportsSources
utilitiestelegraf1.23.4-1libcTelegraf is a plugin-driven agent for collecting and sending metrics and events.
It supports various inputs (including prometheus endpoints) and is able to send data into InfluxDB.
(Small build. Most plugins excluded)

13101kB13193kBMITJonathan PagelBug reportsSources
utilitiesxsltproc1.1.34-1libc, libxslt, libexsltXSLT XML transformation utility.

8kB7kBMITJiri SlachtaBug reportsSources
utilitiestaskwarrior2.5.1-1libc, libstdcpp6, libuuid1, libgnutlstaskwarrior is a command-line todo list manager

463kB463kBMITcommon packages maintainersBug reportsSources
utilitiesnetwhere0.9-1libc, libtins, libmicrohttpdNetwork monitor

32kB31kBMITBen SmithBug reportsSources
utilitiesdropbearconvert2019.78-2libc, libsspUtility for converting SSH keys

18kB17kBMITOpenWrt teamBug reportsSources
utilitiescmdpad0.0.3-5libc, libsspcmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

7kB6kBMITTed HessBug reportsSources
utilitiesxsltproc1.1.32-4libc, libxslt, libexsltXSLT XML transformation utility.

8kB7kBMITJiri SlachtaBug reportsSources
utilitiestaskwarrior2.4.4-1libc, libstdcpp, libuuid, libgnutlstaskwarrior is a command-line todo list manager

427kB427kBMITLuka PerkovBug reportsSources
utilitiesnetwhere0.9-1libc, libtins, libmicrohttpdNetwork monitor

31kB31kBMITBen SmithBug reportsSources
utilitiesdropbearconvert2017.75-7.1libcUtility for converting SSH keys

22kB21kBMITOpenWrt teamBug reportsSources
utilitiescmdpad0.0.3-4libc, libsspcmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

7kB6kBMITTed HessBug reportsSources
utilitiesyq4.34.2-1libcThe aim of the project is to be the jq or sed of yaml files.

3501kB3505kBMITTianling ShenBug reportsSources
utilitiestini0.19.0-2libcA tiny but valid init process for containers.

37kB36kBMITGerard RyanBug reportsSources
utilitiesreptyr0.8.0-5libcreptyr is a utility for taking an existing running program and attaching it
to a new terminal. Started a long-running process over ssh, but have to
leave and don't want to interrupt it? Just start a screen, use reptyr to
grab it, and then kill the ssh session and head on home.

14kB13kBMITJosef SchlehoferBug reportsSources
utilitieslibxml2-utils2.10.4-1libc, librt, libpthread, libxml2This package contains the binaries xmllint and xmlcatalog
from libxml2, a library for manipulating XML and HTML resources.

23kB23kBMITMichael HeimpoldBug reportsSources
utilitiesipfs-http-client-tests2019-11-05-763e59ad-3libc, librt, libpthread, libipfs-http-client, libcurl4IPFS (the InterPlanetary File System) is the Distributed Web.
Specs, docs, sources, links: https://ipfs.io/ and https://github.com/ipfs.
This is Vasil Dimov's C++ IPFS HTTP API client library.
This package contains library tests.

213kB213kBMITLeonid EsmanBug reportsSources
utilitiesgiflib-utils5.2.1-1libc, librt, libpthreadThese are the utilities that come with giflib.

37kB36kBMITTed HessBug reportsSources
utilitiesdumb-init1.2.2-1libc, librt, libpthreaddumb-init is a simple process supervisor and init system designed to run as
PID 1 inside minimal container environments.

4kB4kBMITToni UhligBug reportsSources
utilitiesctop0.7.6-1libcTop-like interface for container metrics

4171kB4181kBMITJavier MarcetBug reportsSources
utilitiescmdpad0.0.3-6libccmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

8kB7kBMITTed HessBug reportsSources
utilitiesxsltproc1.1.34-4libc, librt, libpthread, libxslt, libexsltXSLT XML transformation utility.

8kB7kBMITJiri SlachtaBug reportsSources
utilitiestaskwarrior2.5.3-3libc, librt, libpthread, libstdcpp6, libuuid1, libgnutlstaskwarrior is a command-line todo list manager

474kB474kBMITcommon packages maintainersBug reportsSources
utilitiesnetwhere0.9-2libc, libtins, libmicrohttpdNetwork monitor

25kB25kBMITBen SmithBug reportsSources
utilitiesdropbearconvert2022.82-2libcUtility for converting SSH keys

23kB22kBMITOpenWrt teamBug reportsSources
utilitiestaskwarrior2.4.4-1libc, libssp, libstdcpp, libuuid, libgnutlstaskwarrior is a command-line todo list manager

410kB409kBMITLuka PerkovBug reportsSources
utilitiesxsltproc1.1.28-3libc, libssp, libxml2, libxslt, libexsltXSLT XML transformation utility.

7kB7kBMITJiri SlachtaBug reportsSources
utilitiescmdpad0.0.3-3libccmdpad - execute commands when a key is pressed, released or hold down.
Should be started from /etc/rc or /etc/rc.local. To run it as daemon you
need to start it with '&'. All logs are printed to standard out and standard
error (to write the log to disk use cmdpad > /var/log/cmdpad). Cmdpad
searches for /etc/cmdpad.conf and load the key bindings. Then wait for
key event and check each command to see if it should be run.

7kB6kBMITTed HessBug reportsSources
utilitiesdropbearconvert2017.75-4libc, libsspUtility for converting SSH keys

20kB20kBMITLEDE teamBug reportsSources
utilitieslibrespeed-cli1.0.10-2libcLibreSpeed client for measuring internet speed from command line.

2587kB2593kBLGPL-3.0-onlyMichal VasilekBug reportsSources
utilitieslibrespeed-cli1.0.10-2libcLibreSpeed client for measuring internet speed from command line.

2645kB2651kBLGPL-3.0-onlyMichal VasilekBug reportsSources
utilitieslxc-unprivileged5.0.2-2libc, lxc, shadow-utils, shadow-newuidmap, shadow-newgidmappackages:pkgdata:lxc-unprivileged, Support for unprivileged containers requires newuidmap and newguidmap.
This package makes sure they are available & have correct permissions.

1kB0kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko Ratkajpackages:pkgdata:lxc-unprivileged, Bug reportspackages:pkgdata:lxc-unprivileged, Sources
utilitieslxc-info5.0.2-2libc, lxc, lxc-common, libpthread, libcap, liblxcpackages:pkgdata:lxc-info, Utility lxc-info from the LXC userspace tools

362kB367kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko Ratkajpackages:pkgdata:lxc-info, Bug reportspackages:pkgdata:lxc-info, Sources
utilitieslxc-auto5.0.2-2libc, lxc, lxc-start, lxc-stoppackages:pkgdata:lxc-auto, LXC is the userspace control package for Linux Containers, a lightweight
virtual system mechanism sometimes described as “chroot on steroids”.
This package adds an initscript for starting and stopping the containers
on boot and shutdown.

1kB0kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko Ratkajpackages:pkgdata:lxc-auto, Bug reportspackages:pkgdata:lxc-auto, Sources
utilitieslxc-common5.0.2-2libc, lxcpackages:pkgdata:lxc-common, LXC common files

1kB0kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko Ratkajpackages:pkgdata:lxc-common, Bug reportspackages:pkgdata:lxc-common, Sources
utilitieslxc-user-nic5.0.2-2libc, lxc, lxc-common, libpthread, libcap, liblxcpackages:pkgdata:lxc-user-nic, Utility lxc-user-nic from the LXC userspace tools

370kB375kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko Ratkajpackages:pkgdata:lxc-user-nic, Bug reportspackages:pkgdata:lxc-user-nic, Sources
utilitieslxc4.0.10-4libcLXC is the userspace control package for Linux Containers, a lightweight
virtual system mechanism sometimes described as “chroot on steroids”.

0kB0kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
utilitieslxc-wait4.0.10-4libc, lxc, lxc-common, libpthread, libcap, liblxcUtility lxc-wait from the LXC userspace tools

12kB11kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
utilitieslxc-usernsexec4.0.10-4libc, lxc, lxc-common, libpthread, libcap, liblxcUtility lxc-usernsexec from the LXC userspace tools

18kB17kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
utilitieslxc-user-nic4.0.10-4libc, lxc, lxc-common, libpthread, libcap, liblxcUtility lxc-user-nic from the LXC userspace tools

24kB23kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
utilitieslxc-unshare4.0.10-4libc, lxc, lxc-common, libpthread, libcap, liblxcUtility lxc-unshare from the LXC userspace tools

16kB15kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
utilitieslxc-unfreeze4.0.10-4libc, lxc, lxc-common, libpthread, libcap, liblxcUtility lxc-unfreeze from the LXC userspace tools

11kB11kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
utilitieslxc-templates4.0.10-4libc, lxcLXC virtual machine templates

11kB10kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
utilitieslxc-stop4.0.10-4libc, lxc, lxc-common, libpthread, libcap, liblxcUtility lxc-stop from the LXC userspace tools

12kB11kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
utilitieslxc-start4.0.10-4libc, lxc, lxc-common, libpthread, libcap, liblxcUtility lxc-start from the LXC userspace tools

14kB13kBLGPL-2.1-or-later BSD-2-Clause GPL-2.0Marko RatkajBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy