This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='network---wireless'

类别名称版本 依赖包描述信息软件包体积安装后大小授权方式维护人报告错误源代码
network---wirelesshcxtools6.2.4-1libc, librt, libpthread, libpcap1, zlib, libcurl4, libopenssl1.1packages:pkgdata:hcxtools, Set of tools convert packets from captures (h = hash, c = capture, convert and calculate candidates, x = different hashtypes)
for the use with latest hashcat or John the Ripper.

131kB131kBMITAndreas Nilsenpackages:pkgdata:hcxtools, Bug reportspackages:pkgdata:hcxtools, Sources
network---wirelesshcxdumptool6.2.4-1libc, libpcap1, libopenssl1.1packages:pkgdata:hcxdumptool, Small tool to capture packets from wlan devices. After capturing, upload
the “uncleaned” cap here (https://wpa-sec.stanev.org/?submit)
to see if your ap or the client is vulnerable by using common wordlists.
Convert the cap to hccapx and/or to WPA-PMKID-PBKDF2 hashline (16800) with hcxpcaptool (hcxtools)
and check if wlan-key or plainmasterkey was transmitted unencrypted.

60kB59kBMITAndreas Nilsenpackages:pkgdata:hcxdumptool, Bug reportspackages:pkgdata:hcxdumptool, Sources
network---wirelessdynapoint3libc, lua, libubus-lua, libuci-lua, libubox-lua, luci-lib-nixiopackages:pkgdata:dynapoint, Dynapoint uses LUA scripts to allow dynamic access point creation
and deletion depending on changes of certain network conditions.

3kB2kBGPL-3.0-or-laterTobias Iltepackages:pkgdata:dynapoint, Bug reportspackages:pkgdata:dynapoint, Sources
network---wirelesswifischedule1-3libcpackages:pkgdata:wifischedule, Turns WiFi on and off according to a schedule defined in UCI.

3kB3kBPRPLNils Koenigpackages:pkgdata:wifischedule, Bug reportspackages:pkgdata:wifischedule, Sources
network---wirelesswifischedule1-3libcTurns WiFi on and off according to a schedule defined in UCI.

3kB3kBPRPLNils KoenigBug reportsSources
network---wirelesswavemon0.9.2-1libc, libncurses6, libpthread, libnl-genl200wavemon is a ncurses-based monitoring application for wireless network
devices. It currently works under Linux with devices that are supported
by the wireless extensions by Jean Tourrilhes (included in Kernel 2.4
and higher), e.g. the Lucent Orinoco cards.

32kB31kBGPL-2.0-or-laterJonathan McCrohanBug reportsSources
network---wirelessreaver1.6.6-1libc, librt, libpthread, libpcap1Reaver has been designed to be a robust and practical attack against Wi-Fi
Protected Setup (WPS) registrar PINs in order to recover WPA/WPA2
passphrases. It has been tested against a wide variety of access points and
WPS implementations.

This is reaver-wps-fork-t6x, a community forked version, which has included
various bug fixes and additional attack method (the offline Pixie Dust
attack).

229kB297kBGPL-2.0Yousong ZhouBug reportsSources
network---wirelesskismet-server2016-07-R1-5libc, uclibcxx, libnl200, libpcap1, libpcre, libcap, wireless-toolsAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet server.

347kB347kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesskismet-client2016-07-R1-5libc, uclibcxx, libnl200, libncurses6An 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet text interface client.

274kB273kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesshorst5.1-3libc, librt, libpthread, libncurses6, libnl-tiny1[horst] is a scanning and analysis tool for 802.11 wireless networks
and especially IBSS (ad-hoc) mode and mesh networks (OLSR).

40kB39kBGPL-2.0-or-laterBruno RandolfBug reportsSources
network---wirelesshcxdumptool6.0.1-1libc, librt, libpthread, libpcap1, libopenssl1.1Small tool to capture packets from wlan devices. After capturing, upload
the “uncleaned” cap here (https://wpa-sec.stanev.org/?submit)
to see if your ap or the client is vulnerable by using common wordlists.
Convert the cap to hccapx and/or to WPA-PMKID-PBKDF2 hashline (16800) with hcxpcaptool (hcxtools)
and check if wlan-key or plainmasterkey was transmitted unencrypted.

33kB32kBMITAndreas NilsenBug reportsSources
network---wirelesskismet-drone2016-07-R1-5libc, uclibcxx, libnl200, libpcap1, libpcre, libcap, wireless-toolsAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet remote sniffing.and monitoring drone.

199kB198kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesshcxtools6.2.4-1libc, librt, libpthread, libpcap1, zlib, libcurl4, libopenssl1.1Set of tools convert packets from captures (h = hash, c = capture, convert and calculate candidates, x = different hashtypes)
for the use with latest hashcat or John the Ripper.

131kB131kBMITAndreas NilsenBug reportsSources
network---wirelesspixiewps1.4.2-2libc, librt, libpthreadPixiewps is a tool written in C used to bruteforce offline the WPS PIN
exploiting the low or non-existing entropy of some Access Points, the so-called
“pixie-dust attack” discovered by Dominique Bongard in summer 2014. It is
meant for educational purposes only.

32kB31kBGPL-3.0Yousong ZhouBug reportsSources
network---wirelessairmon-ng1.6-1libc, librt, libpthread, wireless-tools, ethtool, procps-ngBash script designed to turn wireless cards into monitor mode.

13kB13kBGPL-2.0-or-laterRick FarinaBug reportsSources
network---wirelessaircrack-ng1.6-1libc, libpcap1, libpcre, libpthread, uclibcxx, libopenssl1.1, libnl-core200, libnl-genl200, zlibWLAN tools for breaking 802.11 WEP/WPA keys

447kB448kBGPL-2.0-or-laterRick FarinaBug reportsSources
network---wirelessdynapoint3libc, lua, libubus-lua, libuci-lua, libubox-lua, luci-lib-nixioDynapoint uses LUA scripts to allow dynamic access point creation
and deletion depending on changes of certain network conditions.

3kB2kBGPL-3.0-or-laterTobias IlteBug reportsSources
network---wirelesswifischedule1-2libc, libsspTurns WiFi on and off according to a schedule defined in UCI.

3kB3kBPRPLNils KoenigBug reportsSources
network---wirelesswavemon0.9.1-1libc, libncurses6, libpthread, libnl-genl200wavemon is a ncurses-based monitoring application for wireless network
devices. It currently works under Linux with devices that are supported
by the wireless extensions by Jean Tourrilhes (included in Kernel 2.4
and higher), e.g. the Lucent Orinoco cards.

29kB28kBGPL-2.0-or-laterJonathan McCrohanBug reportsSources
network---wirelessreaver1.6.5-1libc, libssp, libpcap1Reaver has been designed to be a robust and practical attack against Wi-Fi
Protected Setup (WPS) registrar PINs in order to recover WPA/WPA2
passphrases. It has been tested against a wide variety of access points and
WPS implementations.

This is reaver-wps-fork-t6x, a community forked version, which has included
various bug fixes and additional attack method (the offline Pixie Dust
attack).

213kB281kBGPL-2.0Yousong ZhouBug reportsSources
network---wirelesspixiewps1.4.2-2libc, libssp, libpthreadPixiewps is a tool written in C used to bruteforce offline the WPS PIN
exploiting the low or non-existing entropy of some Access Points, the so-called
“pixie-dust attack” discovered by Dominique Bongard in summer 2014. It is
meant for educational purposes only.

31kB31kBGPL-3.0Yousong ZhouBug reportsSources
network---wirelesskismet-drone2016-07-R1-1libc, libssp, uclibcxx, libnl200, libpcap1, libpcre, libcap, wireless-toolsAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet remote sniffing.and monitoring drone.

191kB191kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesshorst5.1-3libc, libncurses6, libnl-tiny[horst] is a scanning and analysis tool for 802.11 wireless networks
and especially IBSS (ad-hoc) mode and mesh networks (OLSR).

42kB42kBGPL-2.0-or-laterBruno RandolfBug reportsSources
network---wirelesswavemon0.8.2-1libc, libncurses, libpthread, libnl-genlwavemon is a ncurses-based monitoring application for wireless network
devices. It currently works under Linux with devices that are supported
by the wireless extensions by Jean Tourrilhes (included in Kernel 2.4
and higher), e.g. the Lucent Orinoco cards.

29kB28kBGPL-2.0+Jonathan McCrohanBug reportsSources
network---wirelessreaver1.6.4-1libc, libssp, libpcapReaver has been designed to be a robust and practical attack against Wi-Fi
Protected Setup (WPS) registrar PINs in order to recover WPA/WPA2
passphrases. It has been tested against a wide variety of access points and
WPS implementations.

This is reaver-wps-fork-t6x, a community forked version, which has included
various bug fixes and additional attack method (the offline Pixie Dust
attack).

214kB281kBGPL-2.0Yousong ZhouBug reportsSources
network---wirelesspixiewps1.4.2-2libc, libssp, libpthreadPixiewps is a tool written in C used to bruteforce offline the WPS PIN
exploiting the low or non-existing entropy of some Access Points, the so-called
“pixie-dust attack” discovered by Dominique Bongard in summer 2014. It is
meant for educational purposes only.

31kB30kBGPL-3.0Yousong ZhouBug reportsSources
network---wirelesskismet-server2016-07-R1-1libc, libssp, uclibcxx, libnl, libpcap, libpcre, libcap, wireless-toolsAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet server.

336kB336kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesskismet-client2016-07-R1-1libc, uclibcxx, libnl, libncursesAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet text interface client.

281kB281kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesshorst5.1-2libc, libncurses, libnl-tiny[horst] is a scanning and analysis tool for 802.11 wireless networks
and especially IBSS (ad-hoc) mode and mesh networks (OLSR).

42kB41kBGPL-2.0+Bruno RandolfBug reportsSources
network---wirelessdynapoint2libc, libssp, lua, libubus-lua, libuci-lua, libubox-lua, luci-lib-nixioDynapoint uses LUA scripts to allow dynamic access point creation
and deletion depending on changes of certain network conditions.

3kB2kBGPL-3.0+Tobias IlteBug reportsSources
network---wirelessairmon-ng1.2-rc1-2libc, libssp, wireless-tools, ethtool, procps-ngBash script designed to turn wireless cards into monitor mode.

7kB6kBGPL-2.0Rick FarinaBug reportsSources
network---wirelessaircrack-ng1.2-rc1-2libc, libpcap, libpthread, libopenssl, libnl-core, libnl-genl, zlibWLAN tools for breaking 802.11 WEP/WPA keys

420kB420kBGPL-2.0Rick FarinaBug reportsSources
network---wirelesskismet-drone2016-07-R1-1libc, uclibcxx, libnl, libpcap, libpcre, libcap, wireless-toolsAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet remote sniffing.and monitoring drone.

201kB201kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesskismet-server2016-07-R1-1libc, libssp, uclibcxx, libnl200, libpcap1, libpcre, libcap, wireless-toolsAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet server.

331kB330kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesshcxdumptool6.0.1-1libc, libpcap1, libopenssl1.1Small tool to capture packets from wlan devices. After capturing, upload
the “uncleaned” cap here (https://wpa-sec.stanev.org/?submit)
to see if your ap or the client is vulnerable by using common wordlists.
Convert the cap to hccapx and/or to WPA-PMKID-PBKDF2 hashline (16800) with hcxpcaptool (hcxtools)
and check if wlan-key or plainmasterkey was transmitted unencrypted.

35kB34kBMITAndreas NilsenBug reportsSources
network---wirelessdynapoint3libc, lua, libubus-lua, libuci-lua, libubox-lua, luci-lib-nixioDynapoint uses LUA scripts to allow dynamic access point creation
and deletion depending on changes of certain network conditions.

3kB2kBGPL-3.0-or-laterTobias IlteBug reportsSources
network---wirelessairmon-ng1.5.2libc, wireless-tools, ethtool, procps-ngBash script designed to turn wireless cards into monitor mode.

13kB12kBGPL-2.0Rick FarinaBug reportsSources
network---wirelessaircrack-ng1.5.2libc, libpcap1, libpcre, libpthread, uclibcxx, libopenssl1.1, libnl-core200, libnl-genl200, zlibWLAN tools for breaking 802.11 WEP/WPA keys

423kB424kBGPL-2.0Rick FarinaBug reportsSources
network---wirelesshcxdumptool6.2.4-1libc, libpcap1, libopenssl1.1Small tool to capture packets from wlan devices. After capturing, upload
the “uncleaned” cap here (https://wpa-sec.stanev.org/?submit)
to see if your ap or the client is vulnerable by using common wordlists.
Convert the cap to hccapx and/or to WPA-PMKID-PBKDF2 hashline (16800) with hcxpcaptool (hcxtools)
and check if wlan-key or plainmasterkey was transmitted unencrypted.

60kB59kBMITAndreas NilsenBug reportsSources
network---wirelesskismet-client2016-07-R1-1libc, uclibcxx, libnl200, libncurses6An 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet text interface client.

275kB274kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesswifischedule1-2libcTurns WiFi on and off according to a schedule defined in UCI.

3kB3kBPRPLNils KoenigBug reportsSources
network---wirelesswifischedule1-3libcTurns WiFi on and off according to a schedule defined in UCI.

3kB3kBPRPLNils KoenigBug reportsSources
network---wirelesswavemon0.9.3-1libc, libncurses6, libpthread, libnl-genl200wavemon is a ncurses-based monitoring application for wireless network
devices. It currently works under Linux with devices that are supported
by the wireless extensions by Jean Tourrilhes (included in Kernel 2.4
and higher), e.g. the Lucent Orinoco cards.

29kB28kBGPL-2.0-or-laterJonathan McCrohanBug reportsSources
network---wirelessreaver1.6.6-1libc, librt, libpthread, libpcap1Reaver has been designed to be a robust and practical attack against Wi-Fi
Protected Setup (WPS) registrar PINs in order to recover WPA/WPA2
passphrases. It has been tested against a wide variety of access points and
WPS implementations.

This is reaver-wps-fork-t6x, a community forked version, which has included
various bug fixes and additional attack method (the offline Pixie Dust
attack).

217kB284kBGPL-2.0Yousong ZhouBug reportsSources
network---wirelesspixiewps1.4.2-2libc, librt, libpthreadPixiewps is a tool written in C used to bruteforce offline the WPS PIN
exploiting the low or non-existing entropy of some Access Points, the so-called
“pixie-dust attack” discovered by Dominique Bongard in summer 2014. It is
meant for educational purposes only.

31kB31kBGPL-3.0Yousong ZhouBug reportsSources
network---wirelesskismet-server2016-07-R1-5libc, uclibcxx, libnl200, libpcap1, libpcre, libcap, wireless-toolsAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet server.

347kB347kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesskismet-drone2016-07-R1-5libc, uclibcxx, libnl200, libpcap1, libpcre, libcap, wireless-toolsAn 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet remote sniffing.and monitoring drone.

199kB198kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesskismet-client2016-07-R1-5libc, uclibcxx, libnl200, libncurses6An 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.
This package contains the kismet text interface client.

274kB273kBLGPLv2.1Jean-Michel lacroixBug reportsSources
network---wirelesshorst5.1-4libc, libncurses6, libnl-tiny1[horst] is a scanning and analysis tool for 802.11 wireless networks
and especially IBSS (ad-hoc) mode and mesh networks (OLSR).

45kB44kBGPL-2.0-or-laterBruno RandolfBug reportsSources
network---wirelessdynapoint3libc, lua, libubus-lua, libuci-lua, libubox-lua, luci-lib-nixioDynapoint uses LUA scripts to allow dynamic access point creation
and deletion depending on changes of certain network conditions.

3kB2kBGPL-3.0-or-laterTobias IlteBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy