软件包列表
软件包分类
点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。
软件包列表
为了不影响您的体验,每页只显示50个软件包。
- 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
- 点击表头可对按对应字段对内容进行排序。
- 在
反白框输入您的筛选条件。
当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。
Filtered by categories='network'
| 类别 | 名称 | 版本 | 依赖包 | 描述信息 | 软件包体积 | 安装后大小 | 授权方式 | 维护人 | 报告错误 | ↓ 源代码 |
|---|---|---|---|---|---|---|---|---|---|---|
| network | ahcpd | 0.53-2 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 21kB | 21kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | alfred | 2016.5-0 | libc, libssp, libnl-tiny, librt | alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. | 21kB | 20kB | GPL-2.0 | common routing maintainers | Bug reports | Sources |
| network | batctl | 2016.5-1 | libc, libssp, kmod-batman-adv, libnl-tiny, librt | batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2016.5 of the user space utility. | 31kB | 30kB | GPL-2.0 | Marek Lindner | Bug reports | Sources |
| network | hnet-full-l2tp | 2016-06-28-606d7e9046..e-1 | libc, libssp, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage (w/ L2TP) | 1kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnetd-openssl | 2016-06-28-606d7e9046..e-1 | libc, odhcpd, odhcp6c, netifd, libopenssl | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 90kB | 89kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnet-full-secure | 2016-06-28-606d7e9046..e-1 | libc, libssp, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage (w/ SSL) | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnet-full | 2016-06-28-606d7e9046..e-1 | libc, libssp, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnetd-nossl | 2016-06-28-606d7e9046..e-1 | libc, libssp, odhcpd, odhcp6c, netifd | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 85kB | 84kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | minimalist-pcproxy | 2015-01-12-2d6d1b0b0a..b-1 | libc, libssp, libubox | This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. | 6kB | 5kB | GPL-2.0 | Markus Stenberg | Bug reports | Sources |
| network | mrd6 | 2013-11-30-c805eb3325..0-1 | libc, libstdcpp | Multicast is becoming a major component in next generation networks, used in several scenarios, from video broadcasting to multimedia conferencing. In order to be implemented, new technology needs supporting hardware and software across a set of devices and systems. MRD6 is an implementation of a modular IPv6 Multicast Routing Framework for the Linux operating system and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support. | 233kB | 233kB | GPL-2.0+ | Steven Barth | Bug reports | Sources |
| network | 464xlat | 10 | libc, libssp, kmod-nat46, ip | 464xlat CLAT support | 4kB | 4kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | map-t | 10 | libc, libssp, map, kmod-nat46 | MAP-T configuration support | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | ndppd | 0.2.3-1 | libc, libssp, uclibcxx | ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 31kB | 30kB | GPL-3.0+ | Gabriel Kerneis | Bug reports | Sources |
| network | pimbd | 2015-08-18-68f5fc8031..5-1 | libc, libssp, netifd | This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. | 71kB | 70kB | Apache-2.0 | Pierre Pfister | Bug reports | Sources |
| network | ahcpd | 0.53-2 | libc, libssp, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 19kB | 18kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | alfred | 2018.1-2 | libc, libssp, libnl-tiny, librt | alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. | 21kB | 20kB | GPL-2.0 | common routing maintainers | Bug reports | Sources |
| network | alfred | 2018.1-2 | libc, libssp, libnl-tiny, librt | packages:pkgdata_owrt18_6:alfred, alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. | 21kB | 20kB | GPL-2.0 | common routing maintainers | packages:pkgdata_owrt18_6:alfred, Bug reports | packages:pkgdata_owrt18_6:alfred, Sources |
| network | batctl | 2018.1-1 | libc, kmod-batman-adv, libnl-tiny, librt | batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2018.1 of the user space utility. | 35kB | 34kB | GPL-2.0 | Simon Wunderlich | Bug reports | Sources |
| network | batctl | 2018.1-1 | libc, kmod-batman-adv, libnl-tiny, librt | batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2018.1 of the user space utility. | 35kB | 34kB | GPL-2.0 | Simon Wunderlich | Bug reports | Sources |
| network | batctl | 2018.1-1 | libc, kmod-batman-adv, libnl-tiny, librt | packages:pkgdata_owrt18_6:batctl, batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2018.1 of the user space utility. | 35kB | 34kB | GPL-2.0 | Simon Wunderlich | packages:pkgdata_owrt18_6:batctl, Bug reports | packages:pkgdata_owrt18_6:batctl, Sources |
| network | hnet-full-l2tp | 2016-06-28-606d7e9046..e-1 | libc, libssp, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage (w/ L2TP) | 1kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnet-full-secure | 2016-06-28-606d7e9046..e-1 | libc, libssp, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage (w/ SSL) | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnet-full | 2016-06-28-606d7e9046..e-1 | libc, libssp, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnetd-nossl | 2016-06-28-606d7e9046..e-1 | libc, odhcpd, odhcp6c, netifd | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 91kB | 90kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnetd-openssl | 2016-06-28-606d7e9046..e-1 | libc, libssp, odhcpd, odhcp6c, netifd, libopenssl | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 92kB | 91kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnet-full-secure | 2016-06-28-606d7e9046..e-1 | libc, libssp, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | packages:pkgdata_owrt18_6:hnet-full-secure, HNCP Homenet metapackage (w/ SSL) | 0kB | 0kB | GPL-2.0 | Steven Barth | packages:pkgdata_owrt18_6:hnet-full-secure, Bug reports | packages:pkgdata_owrt18_6:hnet-full-secure, Sources |
| network | hnet-full | 2016-06-28-606d7e9046..e-1 | libc, libssp, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | packages:pkgdata_owrt18_6:hnet-full, HNCP Homenet metapackage | 0kB | 0kB | GPL-2.0 | Steven Barth | packages:pkgdata_owrt18_6:hnet-full, Bug reports | packages:pkgdata_owrt18_6:hnet-full, Sources |
| network | minimalist-pcproxy | 2015-01-12-2d6d1b0b0a..b-1 | libc, libssp, libubox | This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. | 6kB | 5kB | GPL-2.0 | Markus Stenberg | Bug reports | Sources |
| network | mrd6 | 2013-11-30-c805eb3325..0-2 | libc, libstdcpp | Multicast is becoming a major component in next generation networks, used in several scenarios, from video broadcasting to multimedia conferencing. In order to be implemented, new technology needs supporting hardware and software across a set of devices and systems. MRD6 is an implementation of a modular IPv6 Multicast Routing Framework for the Linux operating system and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support. | 233kB | 232kB | GPL-2.0+ | Steven Barth | Bug reports | Sources |
| network | map-t | 11 | libc, map, kmod-nat46 | MAP-T configuration support | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | map-t | 11 | libc, map, kmod-nat46 | MAP-T configuration support | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | 464xlat | 11 | libc, kmod-nat46, ip | 464xlat CLAT support | 4kB | 4kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | ndppd | 0.2.3-1 | libc, libssp, uclibcxx | ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 29kB | 29kB | GPL-3.0+ | Gabriel Kerneis | Bug reports | Sources |
| network | pimbd | 2018-06-19-dbf4e5913b..1-1 | libc, netifd | This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. | 78kB | 77kB | Apache-2.0 | Pierre Pfister | Bug reports | Sources |
| network | ahcpd | 0.53-2 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 21kB | 20kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | alfred | 2019.2-3 | libc, libnl-tiny, librt | alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. | 25kB | 24kB | GPL-2.0 | common routing maintainers | Bug reports | Sources |
| network | batctl-default | 2019.2-8 | libc, libnl-tiny, librt | batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2019.2 of the user space utility. Standard subcommands for configuration and online debugging are enabled. | 40kB | 39kB | GPL-2.0 | Simon Wunderlich | Bug reports | Sources |
| network | batctl-full | 2019.2-8 | libc, libnl-tiny, librt | batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2019.2 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. | 46kB | 45kB | GPL-2.0 | Simon Wunderlich | Bug reports | Sources |
| network | batctl-tiny | 2019.2-8 | libc, libnl-tiny, librt | batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2019.2 of the user space utility. Only configuration relevant subcommands are enabled. | 15kB | 14kB | GPL-2.0 | Simon Wunderlich | Bug reports | Sources |
| network | hnet-full-l2tp | 2016-06-28-606d7e9046..e-2 | libc, libssp, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage (w/ L2TP) | 1kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnet-full-secure | 2016-06-28-606d7e9046..e-2 | libc, libssp, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage (w/ SSL) | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnet-full | 2016-06-28-606d7e9046..e-2 | libc, libssp, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy | HNCP Homenet metapackage | 0kB | 0kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnetd-nossl | 2016-06-28-606d7e9046..e-2 | libc, odhcpd, odhcp6c, netifd | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 91kB | 90kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | hnetd-openssl | 2016-06-28-606d7e9046..e-2 | libc, libssp, odhcpd, odhcp6c, netifd, libopenssl1.1 | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 95kB | 94kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | minimalist-pcproxy | 2015-01-12-2d6d1b0b0a..b-1 | libc, libssp, libubox20191228 | This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. | 6kB | 5kB | GPL-2.0 | Markus Stenberg | Bug reports | Sources |
| network | mrd6 | 2013-11-30-c805eb3325..0-2 | libc, libssp, libstdcpp6 | Multicast is becoming a major component in next generation networks, used in several scenarios, from video broadcasting to multimedia conferencing. In order to be implemented, new technology needs supporting hardware and software across a set of devices and systems. MRD6 is an implementation of a modular IPv6 Multicast Routing Framework for the Linux operating system and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support. | 240kB | 239kB | GPL-2.0+ | Steven Barth | Bug reports | Sources |
| network | ndppd | 0.2.5-1 | libc, uclibcxx | ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 34kB | 33kB | GPL-3.0+ | Gabriel Kerneis | Bug reports | Sources |
| network | pimbd | 2018-06-19-dbf4e5913b..1-1 | libc, netifd | This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. | 78kB | 77kB | Apache-2.0 | Pierre Pfister | Bug reports | Sources |
| network | ahcpd | 0.53-3 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 23kB | 22kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | alfred | 2021.1-3 | libc, librt, libpthread, libnl-tiny1 | alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. | 23kB | 21kB | GPL-2.0-only MIT | Simon Wunderlich | Bug reports | Sources |
| Next page | ||||||||||