This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='network'

类别名称版本依赖包描述信息 软件包体积安装后大小授权方式维护人报告错误源代码
networkipip4libc, kmod-ipip, resolveipIP in IP Tunnel config support in /etc/config/network.

1kB0kBGPL-2.0Hans DedeckerBug reportsSources
networknut-avahi-service2.7.4-27libc, librt, libpthread, nut, avahi-daemonThis package contains the service definition for announcing the
attached UPS via mDNS/DNS-SD.

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsmon-sendmail-notify2.7.4-27libc, nut, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon with default notification via sendmail

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networkpppossh2libc, librt, libpthread, ppp, resolveipThis package adds protocol support for PPP over SSH. The protocol name is
'pppossh' as in netifd interface config option 'proto'.

1kB0kBGPLv2Yousong ZhouBug reportsSources
networksamba36-hotplug3.6.25-12libc, libssp, block-mountSamba 3.6 SMB/CIFS hotplug

1kB1kBGPL-3.0Felix FietkauBug reportsSources
networkvti5libc, librt, libpthread, kmod-ip-vti, kmod-ip6-vtiVirtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre ValentinBug reportsSources
networkipip1-2libc, libssp, kmod-ipip, resolveippackages:pkgdata_lede17_1:ipip, IP in IP Tunnel config support in /etc/config/network.

1kB0kBGPL-2.0Hans Dedeckerpackages:pkgdata_lede17_1:ipip, Bug reportspackages:pkgdata_lede17_1:ipip, Sources
networkwg-installer-server-hotplug-babeld28libc, librt, libpthread, wg-installer-serverWireGuard Installer (server)

1kB0kBNick HainkeBug reportsSources
networkatlas-sw-probe-rpc5080-2libc, atlas-probe, bind-dig, rpcdProvides ubus calls for probe.

1kB0kBGPL-3.0-or-laterJan PavlinecBug reportsSources
networkvxlan3libc, libssp, kmod-vxlanVirtual eXtensible LAN config support in /etc/config/network.

1kB0kBGPL-2.0Matthias SchifferBug reportsSources
networkhnet-full-l2tp2016-06-28-606d7e9046..e-1libc, libssp, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxyHNCP Homenet metapackage (w/ L2TP)

1kB0kBGPL-2.0Steven BarthBug reportsSources
networkltq-dsl-base3libc, jshnThis package contains DSL related files for Intel/Lantiq DSL Chipsets.

1kB0kBOpenWrt teamBug reportsSources
networkstatic-neighbor-reports1-2libc, libuci-lua, libubus-lua, luaAllows to configure static neighbor reports for hostapd interfaces.

These neighbor reports are avilable to clients using IEEE 802.11k.

1kB0kBGPL-2.0-onlyDavid BauerBug reportsSources
networkxfrm4libc, kmod-xfrm-interfaceXFRM IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre ValentinBug reportsSources
networkxray-example1.8.3-1libc, xray-coreXray, Penetrates Everything. It helps you to build your own computer network.
It secures your network connections and thus protects your privacy.

This includes example configuration files for xray-core.

1kB0kBMPL-2.0Tianling ShenBug reportsSources
network6to412-2libc, kmod-sitProvides support for 6to4 tunnels in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
networkds-lite7-4libc, libssp, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
networkipip1-2libc, kmod-ipip, resolveipIP in IP Tunnel config support in /etc/config/network.

1kB0kBGPL-2.0Hans DedeckerBug reportsSources
networknut-avahi-service2.7.4-11libc, libssp, nut, avahi-daemonThis package contains the service definition for announcing the
attached UPS via mDNS/DNS-SD.

1kB0kBGPL-2.0Daniel DickinsonBug reportsSources
networknut-upsmon-sendmail-notify2.7.4-11libc, nut, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon with default notification via sendmail

1kB0kBGPL-2.0Daniel DickinsonBug reportsSources
networkpppossh2libc, libssp, ppp, resolveipThis package adds protocol support for PPP over SSH. The protocol name is
'pppossh' as in netifd interface config option 'proto'.

1kB0kBGPLv2Yousong ZhouBug reportsSources
networksamba36-hotplug3.6.25-12libc, block-mountSamba 3.6 SMB/CIFS hotplug

1kB1kBGPL-3.0Felix FietkauBug reportsSources
networkvti1-2libc, libsspVirtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB1kBGPL-2.0Andre ValentinBug reportsSources
networkvxlan2libc, libssp, kmod-vxlanVirtual eXtensible LAN config support in /etc/config/network.

1kB0kBGPL-2.0Matthias SchifferBug reportsSources
network6to412-2libc, libssp, kmod-sitProvides support for 6to4 tunnels in /etc/config/network.
Refer to https://openwrt.org/docs/guide-user/base-system/basic-networking
configuration details.

1kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
networkds-lite7-4libc, libssp, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
networkhnet-full-l2tp2016-06-28-606d7e9046..e-2libc, libssp, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxyHNCP Homenet metapackage (w/ L2TP)

1kB0kBGPL-2.0Steven BarthBug reportsSources
networkipip1-3libc, libssp, kmod-ipip, resolveipIP in IP Tunnel config support in /etc/config/network.

1kB0kBGPL-2.0Hans DedeckerBug reportsSources
networkipset7.3-1libc, kmod-ipt-ipset, libmnl0, libipset13IPset administration utility

1kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
networknut-upsmon-sendmail-notify2.7.4-22libc, nut, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon with default notification via sendmail

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-PerlDaniel DickinsonBug reportsSources
networknut-avahi-service2.7.4-22libc, nut, avahi-daemonThis package contains the service definition for announcing the
attached UPS via mDNS/DNS-SD.

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-PerlDaniel DickinsonBug reportsSources
networkpppossh2libc, libssp, ppp, resolveipThis package adds protocol support for PPP over SSH. The protocol name is
'pppossh' as in netifd interface config option 'proto'.

1kB0kBGPLv2Yousong ZhouBug reportsSources
networksamba36-hotplug3.6.25-14libc, blockdSamba 3.6 SMB/CIFS hotplug script for auto sharing

1kB0kBGPL-3.0Felix FietkauBug reportsSources
networkvti1-3libc, libsspVirtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre ValentinBug reportsSources
networkpppossh2libc, librt, libpthread, ppp, resolveipThis package adds protocol support for PPP over SSH. The protocol name is
'pppossh' as in netifd interface config option 'proto'.

1kB0kBGPLv2Yousong ZhouBug reportsSources
networkapinger-rrd2015-04-09-78eb3287-3libc, librt, libpthread, apinger, rrdtool1, rrdcgi1Generate RRD Graphs from Apinger Data

1kB0kBGPL-2.0-onlyAlex SamorukovBug reportsSources
networkltq-dsl-base3libc, jshnThis package contains DSL related files for Intel/Lantiq DSL Chipsets.

1kB0kBOpenWrt teamBug reportsSources
networkwg-installer-server-hotplug-olsrd28libc, wg-installer-serverWireGuard Installer (server)

1kB0kBNick HainkeBug reportsSources
networkwg-installer-server-hotplug-olsrd27libc, wg-installer-serverWireGuard Installer (server)

1kB0kBNick HainkeBug reportsSources
networkds-lite8libc, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
network6to413libc, librt, libpthread, kmod-sitProvides support for 6to4 tunnels in /etc/config/network.
Refer to https://openwrt.org/docs/guide-user/base-system/basic-networking
configuration details.

1kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
networkieee8021xclient3libcWired 802.1x client config support in /etc/config/network.

1kB1kBGPL-2.0-or-laterDavid YangBug reportsSources
networkv2ray-example5.7.0-1libc, v2ray-coreProject V is a set of network tools that help you to build your own computer network.
It secures your network connections and thus protects your privacy.

This includes example configuration files for v2ray-core.

1kB0kBMITTianling ShenBug reportsSources
networknut-upsmon-sendmail-notify2.7.4-22libc, librt, libpthread, nut, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon with default notification via sendmail

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networkatlas-sw-probe-rpc5080-2libc, librt, libpthread, atlas-probe, bind-dig, rpcdProvides ubus calls for probe.

1kB0kBGPL-3.0-or-laterJan PavlinecBug reportsSources
networkhnet-full-l2tp2018-12-21-c4376661-1libc, librt, libpthread, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxyHNCP Homenet metapackage (w/ L2TP)

1kB0kBGPL-2.0-onlySteven BarthBug reportsSources
networkipip3libc, kmod-ipip, resolveipIP in IP Tunnel config support in /etc/config/network.

1kB0kBGPL-2.0Hans DedeckerBug reportsSources
networknut-avahi-service2.7.4-22libc, librt, libpthread, nut, avahi-daemonThis package contains the service definition for announcing the
attached UPS via mDNS/DNS-SD.

1kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networkstatic-neighbor-reports1-2libc, librt, libpthread, libuci-lua, libubus-lua, luaAllows to configure static neighbor reports for hostapd interfaces.

These neighbor reports are avilable to clients using IEEE 802.11k.

1kB0kBGPL-2.0-onlyDavid BauerBug reportsSources
networkvti3libc, librt, libpthreadVirtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre ValentinBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy