This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='network'

类别名称版本依赖包描述信息软件包体积安装后大小授权方式 维护人报告错误源代码
networkudpxy1.0-25.0-1libcudproxy makes it possible to convert UDP IPTV streams into HTTP
streams which can be viewed even over WLANs. HTTP streams do
not generate huge amounts of multicast traffic, so a sd stream
only takes about 300k. Interesting for peoply who have IPTV at
home and do not want to rent multiple decoders from their
provider but just use their own streaming client (for example
popcornhour/mediatomb/vlc).

35kB33kBGPL-3.0-or-laterÁlvaro Fernández RojasBug reportsSources
networkudpxy2016-09-18-53e4672a75..4-1libc, libsspudproxy makes it possible to convert UDP IPTV streams into HTTP
streams which can be viewed even over WLANs. HTTP streams do
not generate huge amounts of multicast traffic, so a sd stream
only takes about 300k. Interesting for peoply who have IPTV at
home and do not want to rent multiple decoders from their
provider but just use their own streaming client (for example
popcornhour/mediatomb/vlc).

28kB27kBGPL-3.0Álvaro Fernández RojasBug reportsSources
networkudpxy2016-09-18-53e4672a75..4-1libc, libsspudproxy makes it possible to convert UDP IPTV streams into HTTP
streams which can be viewed even over WLANs. HTTP streams do
not generate huge amounts of multicast traffic, so a sd stream
only takes about 300k. Interesting for peoply who have IPTV at
home and do not want to rent multiple decoders from their
provider but just use their own streaming client (for example
popcornhour/mediatomb/vlc).

28kB27kBGPL-3.0Álvaro Fernández RojasBug reportsSources
networkudpxy1.0-25.1-1libc, librt, libpthreadudproxy makes it possible to convert UDP IPTV streams into HTTP
streams which can be viewed even over WLANs. HTTP streams do
not generate huge amounts of multicast traffic, so a sd stream
only takes about 300k. Interesting for peoply who have IPTV at
home and do not want to rent multiple decoders from their
provider but just use their own streaming client (for example
popcornhour/mediatomb/vlc).

30kB29kBGPL-3.0-or-laterÁlvaro Fernández RojasBug reportsSources
networkudpxy2016-09-18-53e4672a75..4-1libcudproxy makes it possible to convert UDP IPTV streams into HTTP
streams which can be viewed even over WLANs. HTTP streams do
not generate huge amounts of multicast traffic, so a sd stream
only takes about 300k. Interesting for peoply who have IPTV at
home and do not want to rent multiple decoders from their
provider but just use their own streaming client (for example
popcornhour/mediatomb/vlc).

32kB31kBGPL-3.0Álvaro Fernández RojasBug reportsSources
networkalfred2018.1-2libc, libssp, libnl-tiny, librtpackages:pkgdata_owrt18_6:alfred, alfred is a user space daemon for distributing arbitrary local information over
the mesh/network in a decentralized fashion. This data can be anything which
appears to be useful - originally designed to replace the batman-adv
visualization (vis), you may distribute hostnames, phone books, administration
information, DNS information, the local weather forecast ...

alfred runs as daemon in the background of the system. A user may insert
information by using the alfred binary on the command line, or use special
programs to communicate with alfred (done via unix sockets). alfred then takes
care of distributing the local information to other alfred servers on other
nodes. This is done via IPv6 link-local multicast, and does not require any
configuration. A user can request data from alfred, and will receive the
information available from all alfred servers in the network.

21kB20kBGPL-2.0common routing maintainerspackages:pkgdata_owrt18_6:alfred, Bug reportspackages:pkgdata_owrt18_6:alfred, Sources
networkalfred2019.2-3libc, libnl-tiny, librtalfred is a user space daemon for distributing arbitrary local information over
the mesh/network in a decentralized fashion. This data can be anything which
appears to be useful - originally designed to replace the batman-adv
visualization (vis), you may distribute hostnames, phone books, administration
information, DNS information, the local weather forecast ...

alfred runs as daemon in the background of the system. A user may insert
information by using the alfred binary on the command line, or use special
programs to communicate with alfred (done via unix sockets). alfred then takes
care of distributing the local information to other alfred servers on other
nodes. This is done via IPv6 link-local multicast, and does not require any
configuration. A user can request data from alfred, and will receive the
information available from all alfred servers in the network.

25kB24kBGPL-2.0common routing maintainersBug reportsSources
networkalfred2018.1-2libc, libssp, libnl-tiny, librtalfred is a user space daemon for distributing arbitrary local information over
the mesh/network in a decentralized fashion. This data can be anything which
appears to be useful - originally designed to replace the batman-adv
visualization (vis), you may distribute hostnames, phone books, administration
information, DNS information, the local weather forecast ...

alfred runs as daemon in the background of the system. A user may insert
information by using the alfred binary on the command line, or use special
programs to communicate with alfred (done via unix sockets). alfred then takes
care of distributing the local information to other alfred servers on other
nodes. This is done via IPv6 link-local multicast, and does not require any
configuration. A user can request data from alfred, and will receive the
information available from all alfred servers in the network.

21kB20kBGPL-2.0common routing maintainersBug reportsSources
networkalfred2016.5-0libc, libssp, libnl-tiny, librtalfred is a user space daemon for distributing arbitrary local information over
the mesh/network in a decentralized fashion. This data can be anything which
appears to be useful - originally designed to replace the batman-adv
visualization (vis), you may distribute hostnames, phone books, administration
information, DNS information, the local weather forecast ...

alfred runs as daemon in the background of the system. A user may insert
information by using the alfred binary on the command line, or use special
programs to communicate with alfred (done via unix sockets). alfred then takes
care of distributing the local information to other alfred servers on other
nodes. This is done via IPv6 link-local multicast, and does not require any
configuration. A user can request data from alfred, and will receive the
information available from all alfred servers in the network.

21kB20kBGPL-2.0common routing maintainersBug reportsSources
networkpen0.34.1-3libc, libopenssl1.1packages:pkgdata:pen, This is pen, a load balancer for “simple” TCP based protocols
such as HTTP or SMTP. It allows several servers to appear as
one to the outside and automatically detects servers that are
down and distributes clients among the available servers.
This gives high availability and scalable performance.

52kB51kBGPL-2.0-or-latercommon packages maintainerspackages:pkgdata:pen, Bug reportspackages:pkgdata:pen, Sources
networkiptraf-ng1.1.4-1libc, libncurses6packages:pkgdata:iptraf-ng, iptraf-ng is a console-based network statistics utility for Linux. It gathers a
variety of figures such as TCP connection packet and byte counts, interface
statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN
station packet and byte counts.

71kB70kBGPL-2.0common packages maintainerspackages:pkgdata:iptraf-ng, Bug reportspackages:pkgdata:iptraf-ng, Sources
networktac_plus4.0.4.28-2libcpackages:pkgdata:tac_plus, TACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built without PAM support.

42kB41kBcommon packages maintainerspackages:pkgdata:tac_plus, Bug reportspackages:pkgdata:tac_plus, Sources
networksmbinfo6.11-2libc, kmod-fs-cifspackages:pkgdata:smbinfo, SMB info

8kB8kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:smbinfo, Bug reportspackages:pkgdata:smbinfo, Sources
networkfoolsm1.0.13-2libc, msmtppackages:pkgdata:foolsm, foolsm is a link state monitor for carrying out actions when a link
transistions from the up to down state or vice versa.

30kB29kBGPL-2.0-onlycommon packages maintainerspackages:pkgdata:foolsm, Bug reportspackages:pkgdata:foolsm, Sources
networknut-common2.7.4-27libc, librt, libpthread, nut, libusb-compat4, libneonpackages:pkgdata:nut-common, Network UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
This package contains the common files.

15kB14kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-common, Bug reportspackages:pkgdata:nut-common, Sources
networkcifsmount6.11-2libc, kmod-fs-cifspackages:pkgdata:cifsmount, CIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:cifsmount, Bug reportspackages:pkgdata:cifsmount, Sources
networkjool-tools-netfilter2022-01-20-3libc, libnl200, kmod-jool-netfilterpackages:pkgdata:jool-tools-netfilter, Jool is an Open Source SIIT and NAT64 for Linux.

This package provides the userspace control programs for Jool.

127kB126kBGPL-2.0-onlycommon packages maintainerspackages:pkgdata:jool-tools-netfilter, Bug reportspackages:pkgdata:jool-tools-netfilter, Sources
networknut-server2.7.4-27libc, nut, nut-commonpackages:pkgdata:nut-server, Network UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsd is responsible for serving the data from the drivers to the
clients. It connects to each driver and maintains a local cache of the
current state. Queries from the clients are served from this cache, so
delays are minimal. This program is essential, and must be running at
all times to actually make any use out of the drivers and clients.

47kB46kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-server, Bug reportspackages:pkgdata:nut-server, Sources
networkmtr0.85+newdns-dd2b75080..b-2libc, libssp, libncursespackages:pkgdata_owrt18_6:mtr, mtr combines the functionality of the 'traceroute' and 'ping' programs
in a single network diagnostic tool.
As mtr starts, it investigates the network connection between the host
mtr runs on and a user-specified destination host. After it
determines the address of each network hop between the machines,
it sends a sequence ICMP ECHO requests to each one to determine the
quality of the link to each machine. As it does this, it prints
running statistics about each machine.

21kB20kBGPL-2.0+common packages maintainerspackages:pkgdata_owrt18_6:mtr, Bug reportspackages:pkgdata_owrt18_6:mtr, Sources
networknut-driver-powercom2.7.4-27libc, librt, libpthread, nut, nut-serverpackages:pkgdata:nut-driver-powercom, Driver for serial Powercom/Trust/Advice UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-driver-powercom, Bug reportspackages:pkgdata:nut-driver-powercom, Sources
networkmiredo1.2.6-3libc, librt, libpthread, kmod-tunpackages:pkgdata:miredo, Miredo is an open-source Teredo IPv6 tunneling software, for Linux and the BSD
operating systems. It includes functional implementations of all components of
the Teredo specification (client, relay and server). It is meant to provide
IPv6 connectivity even from behind NAT devices.

35kB34kBGPL-2.0-or-latercommon packages maintainerspackages:pkgdata:miredo, Bug reportspackages:pkgdata:miredo, Sources
networknut-driver-genericups2.7.4-27libc, librt, libpthread, nut, nut-serverpackages:pkgdata:nut-driver-genericups, Driver for contact-closure UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-driver-genericups, Bug reportspackages:pkgdata:nut-driver-genericups, Sources
networkudptunnel1.1-1libcUDPTunnel is a small program which can tunnel UDP packets bi-directionally
over a TCP connection. Its primary purpose (and original motivation) is to
allow multi-media conferences to traverse a firewall which allows only outgoing
TCP connections.

5kB4kBBSD-3-Clausecommon packages maintainersBug reportsSources
networktac_plus-pam4.0.4.28-2libc, librt, libpthread, libpamTACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built with PAM support.

41kB40kBcommon packages maintainersBug reportsSources
networksmbinfo6.11-2libc, librt, libpthread, kmod-fs-cifsSMB info

8kB7kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networkrsyslog8.2006.0-1libc, librt, libpthread, libestr, libfastjson, libuuid1, zlibEnhanced system logging and kernel message trapping daemons

293kB294kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networkpcapplusplus21.11-1libc, libpcap1, libstdcpp6Library for getting information about the passing traffic

284kB284kBUnlicensecommon packages maintainersBug reportsSources
networknut2.7.4-22libc, librt, libpthreadNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.

0kB0kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-web-cgi2.7.4-22libc, librt, libpthread, nut, nut-common, libgdThe CGI programs are clients that run through your web server.
They allow you to see UPS status and perform certain administrative
commands from any web browser. Javascript and cookies are not required.

44kB43kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upssched2.7.4-22libc, librt, libpthread, nut, nut-common, nut-upsmonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upssched was created to allow users to execute programs at times relative
to events being monitored by upsmon. The original purpose was to allow
for a shutdown to occur after some fixed period on battery, but there are
other uses that are possible.
You can alternatively write your own script and save some space.

13kB12kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsrw2.7.4-22libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsrw allows you to view and change the read/write variables inside your
UPS. It sends commands via the upsd to your driver, which configures the
hardware for you. The list of variables that allow you to change their
values is based on the capabilities of your UPS equipment. Not all
models support this feature. Typically, cheaper hardware does not
support any of them.

12kB10kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsmon2.7.4-22libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsmon is the client process that is responsible for the most important
part of UPS monitoring--shutting down the system when the power goes
out. It can call out to other helper programs for notification purposes
during power events. upsmon can monitor multiple systems using a single
process. Every UPS that is defined in the upsmon.conf configuration file
is assigned a power value and a type (slave or master).

20kB19kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upslog2.7.4-22libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upslog is a daemon that will poll a UPS at periodic intervals, fetch the
variables that interest you, format them, and write them to a file.

10kB9kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-upsc2.7.4-22libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsc is provided as a quick way to poll the status of a UPS server. It
can be used inside shell scripts and other programs that need UPS data
but do not want to include the full interface.

8kB7kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-server2.7.4-22libc, librt, libpthread, nut, nut-commonNetwork UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsd is responsible for serving the data from the drivers to the
clients. It connects to each driver and maintains a local cache of the
current state. Queries from the clients are served from this cache, so
delays are minimal. This program is essential, and must be running at
all times to actually make any use out of the drivers and clients.

48kB47kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-victronups2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for IMV/Victron UPS unit Match

19kB19kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-upscode22.7.4-22libc, librt, libpthread, nut, nut-serverDriver for UPScode II compatible UPS equipment

27kB26kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-tripplitesu2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for Tripp-Lite SmartOnline (SU) UPS equipment

21kB21kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-tripplite2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for Tripp-Lite SmartPro UPS equipment

20kB19kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-solis2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for Brazilian Microsol SOLIS UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-safenet2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for SafeNet compatible UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-riello_usb2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for Riello UPS Protocol UPS equipment via USB

27kB26kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-rhino2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for Brazilian Microsol RHINO UPS equipment

19kB19kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-powerpanel2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for PowerPanel Plus compatible UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-powercom2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for serial Powercom/Trust/Advice UPS equipment

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-oneac2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for Oneac UPS equipment

21kB21kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-oldmge-shut2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for SHUT Protocol UPS equipment

27kB26kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-nutdrv_qx2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for Q* protocol serial and USB based UPS equipment

55kB55kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-microdowell2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for Microdowell Enterprise UPS series

22kB21kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-mge-utalk2.7.4-22libc, librt, libpthread, nut, nut-serverDriver for MGE UPS SYSTEMS UTalk protocol equipment

22kB21kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy