This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='utilities'

类别 名称版本依赖包描述信息软件包体积安装后大小授权方式维护人报告错误源代码
utilitieswatchcat1-7libc, libsspAllows to configure a periodically reboot, or after losing internet connectivity. Configured trough UCI /etc/config/system.

2kB2kBGPL-2.0Roger DBug reportsSources
utilitieswatchcat1-7libc, libsspAllows to configure a periodically reboot, or after losing internet connectivity. Configured trough UCI /etc/config/system.

2kB2kBGPL-2.0Roger DBug reportsSources
utilitieswatchcat1-17libcRestart network interfaces or reboot if pings to hosts fail, or set up periodic reboots. Configured via UCI /etc/config/watchcat

4kB3kBGPL-2.0Roger DBug reportsSources
utilitieswatchcat1-6libcAllows to configure a periodically reboot, or after losing internet connectivity. Configured trough UCI /etc/config/system.

2kB2kBGPL-2.0Roger DBug reportsSources
utilitiesviewadsb3.8.3-2libc, libncurses6Mode-S/ADSB/TIS decoder for various devices (viewadsb)

51kB50kBGPL-3.0-or-laterStijn TintelBug reportsSources
utilitiesviewadsb3.9.0-1libc, libncurses6Mode-S/ADSB/TIS decoder for various devices (viewadsb)

49kB49kBGPL-3.0-or-laterStijn TintelBug reportsSources
utilitiesview10904.0-1libc, libncurses6View1090 is a Mode S messages viewer for dump1090 devices.

36kB36kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesview10903.7.2-1libc, libssp, libncurses6View1090 is a Mode S messages viewer for dump1090 devices.

34kB34kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesview10902017-06-01-1libc, libssp, libpthreadView1090 is a Mode S messages viewer for dump1090 devices.

31kB30kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesview10904.0-1libc, librt, libpthread, libncurses6View1090 is a Mode S messages viewer for dump1090 devices.

36kB35kBGPL-2.0-or-laterÁlvaro Fernández RojasBug reportsSources
utilitiesview10902016-11-26-1libc, libpthreadView1090 is a Mode S messages viewer for dump1090 devices.

31kB30kBGPL-2.0Álvaro Fernández RojasBug reportsSources
utilitiesv4l-utils1.20.0-3libc, libv4l, uclibcxxlibv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.

libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).

libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
This package contains the video4linux utilities.

578kB577kBGPL-2.0-or-laterTed HessBug reportsSources
utilitiesv4l-utils1.20.0-2libc, libssp, libv4l, uclibcxxlibv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.

libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).

libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
This package contains the video4linux utilities.

530kB530kBGPL-2.0-or-laterTed HessBug reportsSources
utilitiesv4l-utils1.10.0-1libc, libssp, libv4l, uclibcxxlibv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.

libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).

libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
This package contains the video4linux utilities.

226kB226kBGPL-2.0 LGPL-2.1Ted HessBug reportsSources
utilitiesv4l-utils1.20.0-4libc, librt, libpthread, libudev-zero, libv4l, libstdcpp6libv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.

libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).

libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
This package contains the video4linux utilities.

485kB485kBGPL-2.0-or-laterTed HessBug reportsSources
utilitiesv4l-utils1.10.0-1libc, libv4l, uclibcxxlibv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.

libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).

libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
This package contains the video4linux utilities.

247kB246kBGPL-2.0 LGPL-2.1Ted HessBug reportsSources
utilitiesuvcdynctrl0.2.5-3libc, libxml2The webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

73kB72kBGPL-3.0-or-laterRoger DBug reportsSources
utilitiesuvcdynctrl0.2.5-1libc, libwebcamThe webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

20kB19kBRoger DBug reportsSources
utilitiesuvcdynctrl0.2.4libc, libwebcamThe webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

20kB19kBRoger DBug reportsSources
utilitiesuvcdynctrl0.2.5-3libc, librt, libpthread, libxml2The webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

62kB61kBGPL-3.0-or-laterRoger DBug reportsSources
utilitiesuvcdynctrl0.2.4libc, libssp, libwebcamThe webcam-tools package contains the following two components:
- libwebcam: Webcam Library (LGPL)
- uvcdynctrl: Manage dynamic controls in uvcvideo (GPL)

19kB18kBRoger DBug reportsSources
utilitiesuuidgen2.36.1-2libc, librt, libpthread, libuuid1The uuidgen program creates (and prints) a new universally unique identifier
(UUID) using the libuuid library. The new UUID can reasonably be considered
unique among all UUIDs created on the local system, and among UUIDs created on
other systems in the past and in the future.

4kB3kBGPL-2.0OpenWrt teamBug reportsSources
utilitiesuuidgen2.34-1libc, libssp, libuuid1The uuidgen program creates (and prints) a new universally unique identifier
(UUID) using the libuuid library. The new UUID can reasonably be considered
unique among all UUIDs created on the local system, and among UUIDs created on
other systems in the past and in the future.

4kB3kBGPL-2.0OpenWrt teamBug reportsSources
utilitiesuuidgen2.32-2libc, libuuidThe uuidgen program creates (and prints) a new universally unique identifier
(UUID) using the libuuid library. The new UUID can reasonably be considered
unique among all UUIDs created on the local system, and among UUIDs created on
other systems in the past and in the future.

4kB3kBGPL-2.0OpenWrt teamBug reportsSources
utilitiesuuidgen2.37.4-1libc, libuuid1The uuidgen program creates (and prints) a new universally unique identifier
(UUID) using the libuuid library. The new UUID can reasonably be considered
unique among all UUIDs created on the local system, and among UUIDs created on
other systems in the past and in the future.

4kB3kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesuuidgen2.29.2-1libc, libssp, libuuidThe uuidgen program creates (and prints) a new universally unique identifier
(UUID) using the libuuid library. The new UUID can reasonably be considered
unique among all UUIDs created on the local system, and among UUIDs created on
other systems in the past and in the future.

3kB2kBGPL-2.0LEDE teamBug reportsSources
utilitiesuuidd2.36.1-2libc, librt, libpthread, libuuid1The uuidd daemon is used by the UUID library to generate universally unique
identifiers (UUIDs), especially time-based UUIDs, in a secure and
guaranteed-unique fashion, even in the face of large numbers of threads
running on different CPUs trying to grab UUIDs.

13kB12kBGPL-2.0OpenWrt teamBug reportsSources
utilitiesuuidd2.34-1libc, libuuid1The uuidd daemon is used by the UUID library to generate universally unique
identifiers (UUIDs), especially time-based UUIDs, in a secure and
guaranteed-unique fashion, even in the face of large numbers of threads
running on different CPUs trying to grab UUIDs.

12kB11kBGPL-2.0OpenWrt teamBug reportsSources
utilitiesuuidd2.32-2libc, libuuidThe uuidd daemon is used by the UUID library to generate universally unique
identifiers (UUIDs), especially time-based UUIDs, in a secure and
guaranteed-unique fashion, even in the face of large numbers of threads
running on different CPUs trying to grab UUIDs.

12kB11kBGPL-2.0OpenWrt teamBug reportsSources
utilitiesuuidd2.37.4-1libc, libuuid1The uuidd daemon is used by the UUID library to generate universally unique
identifiers (UUIDs), especially time-based UUIDs, in a secure and
guaranteed-unique fashion, even in the face of large numbers of threads
running on different CPUs trying to grab UUIDs.

14kB13kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesuuidd2.29.2-1libc, libuuidThe uuidd daemon is used by the UUID library to generate universally unique
identifiers (UUIDs), especially time-based UUIDs, in a secure and
guaranteed-unique fashion, even in the face of large numbers of threads
running on different CPUs trying to grab UUIDs.

11kB11kBGPL-2.0LEDE teamBug reportsSources
utilitiesusbutils013-2libc, libusb-1.0-0, libudev, usbids, librt, libpthreadUSB devices listing utilities

54kB54kBGPL-2.0-onlyFelix FietkauBug reportsSources
utilitiesusbutils007-10libc, libusb-1.0-0, librt, libpthreadUSB devices listing utilities

240kB239kBGPL-2.0Felix FietkauBug reportsSources
utilitiesusbutils007-9libc, libusb-1.0, librt, libpthreadUSB devices listing utilities

235kB235kBGPL-2.0Felix FietkauBug reportsSources
utilitiesusbutils014-1libc, libusb-1.0-0, libudev, librt, libpthreadUSB devices listing utilities

55kB54kBGPL-2.0-onlyFelix FietkauBug reportsSources
utilitiesusbutils007-7libc, libssp, libusb-1.0, librt, libpthreadUSB devices listing utilities

230kB230kBGPL-2.0Felix FietkauBug reportsSources
utilitiesusbreset5libcThis package contains the small usbreset utility which
can be used to send a USB port reset to a USB device -
useful for debugging or to force re-detection of particular
devices.

3kB2kBJo-Philipp WichBug reportsSources
utilitiesusbreset4libcThis package contains the small usbreset utility which
can be used to send a USB port reset to a USB device -
useful for debugging or to force re-detection of particular
devices.

3kB2kBJo-Philipp WichBug reportsSources
utilitiesusbreset4libc, libsspThis package contains the small usbreset utility which
can be used to send a USB port reset to a USB device -
useful for debugging or to force re-detection of particular
devices.

3kB2kBJo-Philipp WichBug reportsSources
utilitiesusbreset4libcThis package contains the small usbreset utility which
can be used to send a USB port reset to a USB device -
useful for debugging or to force re-detection of particular
devices.

3kB2kBJo-Philipp WichBug reportsSources
utilitiesusbmuxd1.1.1-4libc, libssp, librt, libusb-1.0, libusbmuxd, libopenssl, libimobiledeviceThis daemon is in charge of multiplexing connections over USB to an iPhone or
iPod touch. To users, it means you can sync your music, contacts, photos, etc.
over USB. To developers, it means you can connect to any listening localhost
socket on the device. usbmuxd is not used for tethering data transfer, which
uses a dedicated USB interface as a virtual network device.

24kB24kBGPL-2.0Lukasz BajBug reportsSources
utilitiesusbmuxd1.1.1-4libc, libssp, librt, libusb-1.0, libusbmuxd, libopenssl, libimobiledeviceThis daemon is in charge of multiplexing connections over USB to an iPhone or
iPod touch. To users, it means you can sync your music, contacts, photos, etc.
over USB. To developers, it means you can connect to any listening localhost
socket on the device. usbmuxd is not used for tethering data transfer, which
uses a dedicated USB interface as a virtual network device.

25kB24kBGPL-2.0Lukasz BajBug reportsSources
utilitiesusbids0.359-1libcUSB ID list

245kB245kBGPL-2.0-or-later XFree86-1.0common packages maintainersBug reportsSources
utilitiesusbids0.359-1libcUSB ID list

245kB245kBGPL-2.0-or-later XFree86-1.0common packages maintainersBug reportsSources
utilitiesusb-modeswitch2017-12-19-f40f84c2-2libc, librt, libpthread, libubox20210516, libblobmsg-json20210516, libusb-1.0-0USB mode switching utility

13kB13kBGPL-2.0Felix FietkauBug reportsSources
utilitiesusb-modeswitch2017-12-19-f40f84c2-2libc, libssp, libubox20191228, libblobmsg-json, libusb-1.0-0USB mode switching utility

12kB11kBGPL-2.0Felix FietkauBug reportsSources
utilitiesusb-modeswitch2017-12-19-f40f84c2-1libc, libssp, libubox, libblobmsg-json, libusb-1.0USB mode switching utility

12kB11kBGPL-2.0Felix FietkauBug reportsSources
utilitiesusb-modeswitch2022-02-24-3c8595a4-1libc, libubox20220515, libblobmsg-json20220515, libusb-1.0-0USB mode switching utility

13kB12kBGPL-2.0Felix FietkauBug reportsSources
utilitiesusb-modeswitch2017-05-24-453da8e5-1libc, libssp, libubox, libblobmsg-json, libusb-1.0USB mode switching utility

12kB11kBGPL-2.0Felix FietkauBug reportsSources
utilitiesunshare2.36.1-2libc, librt, libpthreadrun programs with some namespaces unshared from parent

13kB13kBGPL-2.0OpenWrt teamBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy