软件包列表
软件包分类
点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。
软件包列表
为了不影响您的体验,每页只显示50个软件包。
- 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
- 点击表头可对按对应字段对内容进行排序。
- 在
反白框输入您的筛选条件。
当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。
Filtered by categories='network'
| 类别 | 名称 | 版本 | 依赖包 | ↑ 描述信息 | 软件包体积 | 安装后大小 | 授权方式 | 维护人 | 报告错误 | 源代码 |
|---|---|---|---|---|---|---|---|---|---|---|
| network | obfsproxy | 0.2.13-1 | libc, python-light, python-crypto, python-pyptlib, python-setuptools, python-yaml, twisted | obfsproxy is a tool that attempts to circumvent censorship, by transforming the Tor traffic between the client and the bridge. This way, censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. | 73kB | 72kB | BSD-3-Clause | Jeffery To | Bug reports | Sources |
| network | obfsproxy | 0.2.13-1 | libc, libssp, python-light, python-crypto, python-pyptlib, python-setuptools, python-yaml, twisted | obfsproxy is a tool that attempts to circumvent censorship, by transforming the Tor traffic between the client and the bridge. This way, censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. | 73kB | 72kB | BSD-3-Clause | Jeffery To | Bug reports | Sources |
| network | obfsproxy | 0.2.13-1 | libc, libssp, python-light, python-crypto, python-pyptlib, python-setuptools, python-yaml, twisted | obfsproxy is a tool that attempts to circumvent censorship, by transforming the Tor traffic between the client and the bridge. This way, censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. | 56kB | 55kB | BSD-3-Clause | Jeffery To | Bug reports | Sources |
| network | obfsproxy-src | 0.2.13-3 | libc | obfsproxy is a tool that attempts to circumvent censorship, by transforming the Tor traffic between the client and the bridge. This way, censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic.. (Contains the Python sources for this package). | 54kB | 53kB | BSD-3-Clause | Jeffery To | Bug reports | Sources |
| network | golang-gitlab-yawning-obfs4-dev | 0.0.14-1 | libc | packages:pkgdata:golang-gitlab-yawning-obfs4-dev, obfs4proxy is a tool that attempts to circumvent censorship by transforming the Tor traffic between the client and the bridge. This way censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4. It is written in Go and is compliant with the Tor pluggable transports specification, and its modular architecture allows it to support multiple pluggable transports. This package provides the source files for the client/bridge program. | 65kB | 64kB | BSD-2-Clause GPL-3.0-or-later | Jeffery To | packages:pkgdata:golang-gitlab-yawning-obfs4-dev, Bug reports | packages:pkgdata:golang-gitlab-yawning-obfs4-dev, Sources |
| network | golang-gitlab-yawning-obfs4-dev | 0.0.11-1 | libc | obfs4proxy is a tool that attempts to circumvent censorship by transforming the Tor traffic between the client and the bridge. This way censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4. It is written in Go and is compliant with the Tor pluggable transports specification, and its modular architecture allows it to support multiple pluggable transports. This package provides the source files for the client/bridge program. | 64kB | 62kB | BSD-2-Clause | Jeffery To | Bug reports | Sources |
| network | golang-gitlab-yawning-obfs4-dev | 0.0.11-1 | libc | obfs4proxy is a tool that attempts to circumvent censorship by transforming the Tor traffic between the client and the bridge. This way censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4. It is written in Go and is compliant with the Tor pluggable transports specification, and its modular architecture allows it to support multiple pluggable transports. This package provides the source files for the client/bridge program. | 64kB | 62kB | BSD-2-Clause | Jeffery To | Bug reports | Sources |
| network | golang-gitlab-yawning-obfs4-dev | 0.0.14-1 | libc | obfs4proxy is a tool that attempts to circumvent censorship by transforming the Tor traffic between the client and the bridge. This way censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4. It is written in Go and is compliant with the Tor pluggable transports specification, and its modular architecture allows it to support multiple pluggable transports. This package provides the source files for the client/bridge program. | 65kB | 64kB | BSD-2-Clause GPL-3.0-or-later | Jeffery To | Bug reports | Sources |
| network | obfs4proxy | 0.0.11-1 | libc | obfs4proxy is a tool that attempts to circumvent censorship by transforming the Tor traffic between the client and the bridge. This way censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4. It is written in Go and is compliant with the Tor pluggable transports specification, and its modular architecture allows it to support multiple pluggable transports. This package contains both the client and the bridge in a single program. | 2475kB | 2481kB | BSD-2-Clause | Jeffery To | Bug reports | Sources |
| network | obfs4proxy | 0.0.11-1 | libc | obfs4proxy is a tool that attempts to circumvent censorship by transforming the Tor traffic between the client and the bridge. This way censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4. It is written in Go and is compliant with the Tor pluggable transports specification, and its modular architecture allows it to support multiple pluggable transports. This package contains both the client and the bridge in a single program. | 2619kB | 2627kB | BSD-2-Clause | Jeffery To | Bug reports | Sources |
| network | obfs4proxy | 0.0.14-1 | libc | obfs4proxy is a tool that attempts to circumvent censorship by transforming the Tor traffic between the client and the bridge. This way censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4. It is written in Go and is compliant with the Tor pluggable transports specification, and its modular architecture allows it to support multiple pluggable transports. This package contains both the client and the bridge in a single program. | 2037kB | 2041kB | BSD-2-Clause GPL-3.0-or-later | Jeffery To | Bug reports | Sources |
| network | netsniff-ng | 0.6.7-2 | libc, libpthread, libpcap1, libncurses6, zlib, liburcu, libsodium, libnetfilter-conntrack3 | netsniff-ng is a free, performant Linux network analyzer and networking toolkit. If you will, the Swiss army knife for network packets. | 532kB | 531kB | GPL-2.0-or-later | Toni Uhlig | Bug reports | Sources |
| network | netsniff-ng | 0.6.7-2 | libc, libpthread, libpcap1, libncurses6, zlib, liburcu, libsodium, libnetfilter-conntrack3 | netsniff-ng is a free, performant Linux network analyzer and networking toolkit. If you will, the Swiss army knife for network packets. | 528kB | 528kB | GPL-2.0-or-later | Toni Uhlig | Bug reports | Sources |
| network | ndppd | 0.2.5-2 | libc, librt, libpthread, libstdcpp6 | packages:pkgdata:ndppd, ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 30kB | 29kB | GPL-3.0-or-later | Gabriel Kerneis | packages:pkgdata:ndppd, Bug reports | packages:pkgdata:ndppd, Sources |
| network | ndppd | 0.2.5-1 | libc, uclibcxx | ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 34kB | 33kB | GPL-3.0+ | Gabriel Kerneis | Bug reports | Sources |
| network | ndppd | 0.2.5-1 | libc, uclibcxx | ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 34kB | 33kB | GPL-3.0+ | Gabriel Kerneis | Bug reports | Sources |
| network | ndppd | 0.2.3-1 | libc, libssp, uclibcxx | ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 29kB | 29kB | GPL-3.0+ | Gabriel Kerneis | Bug reports | Sources |
| network | ndppd | 0.2.5-2 | libc, librt, libpthread, libstdcpp6 | ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 30kB | 29kB | GPL-3.0-or-later | Gabriel Kerneis | Bug reports | Sources |
| network | ndppd | 0.2.3-1 | libc, libssp, uclibcxx | ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. | 31kB | 30kB | GPL-3.0+ | Gabriel Kerneis | Bug reports | Sources |
| network | mtr | 0.85+newdns-dd2b75080..b-2 | libc, libssp, libncurses | packages:pkgdata_owrt18_6:mtr, mtr combines the functionality of the 'traceroute' and 'ping' programs in a single network diagnostic tool. As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. | 21kB | 20kB | GPL-2.0+ | common packages maintainers | packages:pkgdata_owrt18_6:mtr, Bug reports | packages:pkgdata_owrt18_6:mtr, Sources |
| network | mtr | 0.94-1 | libc, librt, libpthread, libncurses6 | mtr combines the functionality of the 'traceroute' and 'ping' programs in a single network diagnostic tool. As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. | 34kB | 33kB | GPL-2.0-or-later | Jonathan McCrohan | Bug reports | Sources |
| network | mtr | 0.93-1 | libc, libncurses6 | mtr combines the functionality of the 'traceroute' and 'ping' programs in a single network diagnostic tool. As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. | 35kB | 34kB | GPL-2.0-or-later | Jonathan McCrohan | Bug reports | Sources |
| network | mtr | 0.85+newdns-dd2b75080..b-2 | libc, libssp, libncurses | mtr combines the functionality of the 'traceroute' and 'ping' programs in a single network diagnostic tool. As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. | 21kB | 20kB | GPL-2.0+ | common packages maintainers | Bug reports | Sources |
| network | mtr | 0.94-1 | libc, librt, libpthread, libncurses6 | mtr combines the functionality of the 'traceroute' and 'ping' programs in a single network diagnostic tool. As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. | 35kB | 33kB | GPL-2.0-or-later | Jonathan McCrohan | Bug reports | Sources |
| network | mtr | 0.85+newdns-dd2b75080..b-2 | libc, libncurses | mtr combines the functionality of the 'traceroute' and 'ping' programs in a single network diagnostic tool. As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. | 25kB | 24kB | GPL-2.0+ | common packages maintainers | Bug reports | Sources |
| network | uacme | 1.6-1 | libc, libcurl4, libmbedtls12 | lightweight client for ACMEv2 | 36kB | 36kB | GPL-3.0-or-later | Lucian Cristian | Bug reports | Sources |
| network | uacme | 1.7.1-4 | libc, libcurl4 | lightweight client for ACMEv2 | 36kB | 35kB | GPL-3.0-or-later | Lucian Cristian | Bug reports | Sources |
| network | libbpf0 | 5.10.10-2 | libc, libelf1 | libbpf is a library for loading eBPF programs and reading and manipulating eBPF objects from user-space. | 94kB | 93kB | LGPL-2.1 OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | libbpf20220308 | 2022-03-08-04c465fd-1 | libc, libelf1 | libbpf is a library for loading eBPF programs and reading and manipulating eBPF objects from user-space. | 136kB | 135kB | LGPL-2.1 OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | libbpf0 | 5.10.10-2 | libc, libelf1 | libbpf is a library for loading eBPF programs and reading and manipulating eBPF objects from user-space. | 94kB | 93kB | LGPL-2.1 OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | lcdringer | 0.0.3-2 | libc, libgee, libgstreamer1, loudmouth | lcdringer | 243kB | 242kB | GPL-2.0 | W. Michael Petullo | Bug reports | Sources |
| network | lcdringer | 0.0.3-2 | libc, libgee, libgstreamer1, loudmouth | lcdringer | 241kB | 240kB | GPL-2.0 | W. Michael Petullo | Bug reports | Sources |
| network | lcdringer | 0.0.2-2 | libc, libgee, libgstreamer1, loudmouth | lcdringer | 240kB | 239kB | GPL-2.0 | W. Michael Petullo | Bug reports | Sources |
| network | lcdringer | 0.0.3-2 | libc, libgee, libgstreamer1, loudmouth | lcdringer | 243kB | 242kB | GPL-2.0 | W. Michael Petullo | Bug reports | Sources |
| network | iptraf-ng | 1.1.4-1 | libc, libncurses6 | packages:pkgdata:iptraf-ng, iptraf-ng is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. | 71kB | 70kB | GPL-2.0 | common packages maintainers | packages:pkgdata:iptraf-ng, Bug reports | packages:pkgdata:iptraf-ng, Sources |
| network | iptraf-ng | 1.1.4-1 | libc, libncurses6 | iptraf-ng is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. | 72kB | 71kB | GPL-2.0 | common packages maintainers | Bug reports | Sources |
| network | iptraf-ng | 1.1.4-1 | libc, libncurses6 | iptraf-ng is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. | 65kB | 64kB | GPL-2.0 | Florian Fainelli | Bug reports | Sources |
| network | iptraf-ng | 1.1.4-1 | libc, libssp, libncurses | iptraf-ng is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. | 57kB | 56kB | GPL-2.0 | Florian Fainelli | Bug reports | Sources |
| network | iptraf-ng | 1.1.4-1 | libc, libncurses6 | iptraf-ng is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. | 71kB | 70kB | GPL-2.0 | common packages maintainers | Bug reports | Sources |
| network | iptraf-ng | 1.1.4-1 | libc, libssp, libncurses | iptraf-ng is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. | 58kB | 57kB | GPL-2.0 | Florian Fainelli | Bug reports | Sources |
| network | samba4-utils | 4.14.12-2 | libc, samba4-libs | installs: smbstatus smbtree mvxattr smbtar smbcquotas Utilities collection | 38kB | 38kB | GPL-3.0-only | Andy Walsh | Bug reports | Sources |
| network | samba4-utils | 4.11.17-2 | libc, libssp, samba4-libs | installs: smbstatus smbtree mvxattr smbtar smbcquotas Utilities collection | 39kB | 38kB | GPL-3.0-only | Andy Walsh | Bug reports | Sources |
| network | samba4-utils | 4.18.8-1 | libc, samba4-libs | installs: smbstatus smbtree mvxattr smbtar (smbcquotas) Utilities collection | 31kB | 31kB | GPL-3.0-only | common packages maintainers | Bug reports | Sources |
| network | samba4-server | 4.14.12-2 | libc, samba4-libs | installs: smbd (nmbd) smbpasswd pdbedit testparm (nmblookup) (smbcacls sharesec) (samba samba-tool ntlm_auth samba-gpupdate samba_dnsupdate samba_kcc samba_spnupdate samba_upgradedns samba_downgrade_db) This provides the basic fileserver service and is the minimum needed to serve file shares. HINT: https://fitzcarraldoblog.wordpress.com/2016/10/17/a-correct-method-of-configuring-samba-for-browsing-smb-shares-in-a-home-network/ | 248kB | 247kB | GPL-3.0-only | Andy Walsh | Bug reports | Sources |
| network | samba4-server | 4.11.17-2 | libc, libssp, samba4-libs | installs: smbd (nmbd) smbpasswd pdbedit testparm (nmblookup) (smbcacls sharesec) (samba samba-tool ntlm_auth samba-gpupdate samba_dnsupdate samba_kcc samba_spnupdate samba_upgradedns samba_downgrade_db) This provides the basic fileserver service and is the minimum needed to serve file shares. HINT: https://fitzcarraldoblog.wordpress.com/2016/10/17/a-correct-method-of-configuring-samba-for-browsing-smb-shares-in-a-home-network/ | 221kB | 221kB | GPL-3.0-only | Andy Walsh | Bug reports | Sources |
| network | samba4-server | 4.18.8-1 | libc, samba4-libs | installs: smbd (nmbd) smbpasswd pdbedit testparm (nmblookup) (smbcacls sharesec) (samba samba-tool ntlm_auth samba-gpupdate samba_dnsupdate samba_kcc samba_spnupdate samba_upgradedns samba_downgrade_db) This provides the basic fileserver service and is the minimum needed to serve file shares. HINT: https://fitzcarraldoblog.wordpress.com/2016/10/17/a-correct-method-of-configuring-samba-for-browsing-smb-shares-in-a-home-network/ | 243kB | 242kB | GPL-3.0-only | common packages maintainers | Bug reports | Sources |
| network | samba4-admin | 4.14.12-2 | libc, samba4-libs | installs: net smbcontrol profiles rpcclient dbwrap_tool eventlogadm ldbadd ldbdel ldbedit ldbmodify ldbrename ldbsearch tdbbackup tdbdump tdbrestore tdbtool Administration tools collection | 884kB | 888kB | GPL-3.0-only | Andy Walsh | Bug reports | Sources |
| network | samba4-admin | 4.11.17-2 | libc, samba4-libs | installs: net smbcontrol profiles rpcclient dbwrap_tool eventlogadm ldbadd ldbdel ldbedit ldbmodify ldbrename ldbsearch tdbbackup tdbdump tdbrestore tdbtool Administration tools collection | 636kB | 639kB | GPL-3.0-only | Andy Walsh | Bug reports | Sources |
| network | samba4-admin | 4.18.8-1 | libc, librt, libpthread, samba4-libs | installs: net smbcontrol profiles rpcclient dbwrap_tool eventlogadm ldbadd ldbdel ldbedit ldbmodify ldbrename ldbsearch tdbbackup tdbdump tdbrestore tdbtool Administration tools collection | 842kB | 847kB | GPL-3.0-only | common packages maintainers | Bug reports | Sources |
| network | samba4-client | 4.14.12-2 | libc, samba4-libs | installs: cifsdd smbclient smbget The smbclient program implements a simple ftp-like client for accessing SMB shares | 101kB | 100kB | GPL-3.0-only | Andy Walsh | Bug reports | Sources |
| Previous page Next page | ||||||||||