This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='network---routing-and-redirection'

类别名称版本依赖包描述信息软件包体积安装后大小授权方式 维护人报告错误源代码
network---routing-and-redirectionquagga-ripd1.2.4-2libc, quagga, quagga-libzebraRIP routing engine

39kB38kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ospfd1.2.4-2libc, quagga, quagga-libospfOSPFv2 routing engine

4kB3kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ospf6d1.2.4-2libc, quagga, quagga-libospfOSPFv3 routing engine

93kB92kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-libzebra1.2.4-2libc, quaggazebra library

142kB142kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-libospf1.2.4-2libc, quagga, quagga-libzebraOSPF library

196kB197kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-isisd1.2.4-2libc, quagga, quagga-libzebraIS-IS routing engine

97kB97kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-bgpd1.2.4-2libc, quagga, quagga-libzebraBGPv4, BGPv4+, BGPv4- routing engine

223kB224kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga1.1.0-1libc, libssp, librtA routing software package that provides TCP/IP based routing services
with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
OSPFv3, BGP-4, and BGP-4+

3kB2kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-zebra1.1.0-1libc, libssp, quagga, quagga-libzebraZebra daemon

79kB78kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-watchquagga1.1.0-1libc, libssp, quagga, quagga-libzebraQuagga watchdog

10kB10kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-vtysh1.1.0-1libc, libssp, quagga, quagga-libzebra, libreadline, libncursesintegrated shell for Quagga routing software

127kB126kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ripngd1.1.0-1libc, libssp, quagga, quagga-libzebraRIPNG routing engine

26kB25kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ripd1.1.0-1libc, libssp, quagga, quagga-libzebraRIP routing engine

32kB31kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ospfd1.1.0-1libc, libssp, quagga, quagga-libospfOSPFv2 routing engine

4kB3kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ospf6d1.1.0-1libc, libssp, quagga, quagga-libospfOSPFv3 routing engine

73kB73kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-libzebra1.1.0-1libc, libssp, quaggazebra library

110kB110kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-libospf1.1.0-1libc, libssp, quagga, quagga-libzebraOSPF library

163kB163kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-isisd1.1.0-1libc, libssp, quagga, quagga-libzebraIS-IS routing engine

78kB78kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-bgpd1.1.0-1libc, libssp, quagga, quagga-libzebraBGPv4, BGPv4+, BGPv4- routing engine

177kB177kBGPL-2.0Vasilis TsiligiannisBug reportsSources
network---routing-and-redirectionbird2c2.13.1-1libc, bird2, libreadline8, libncurses6packages:pkgdata:bird2c, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.

10kB9kBGPL-2.0-or-laterToke Høiland-Jørgensenpackages:pkgdata:bird2c, Bug reportspackages:pkgdata:bird2c, Sources
network---routing-and-redirectionbird2cl2.13.1-1libc, bird2packages:pkgdata:bird2cl, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD lightweight command-line client. It is used to send commands
to BIRD, commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

8kB7kBGPL-2.0-or-laterToke Høiland-Jørgensenpackages:pkgdata:bird2cl, Bug reportspackages:pkgdata:bird2cl, Sources
network---routing-and-redirectionbcp385-11libcpackages:pkgdata:bcp38, bcp38 implements IETF BCP38 for home routers.
See https://tools.ietf.org/html/bcp38.

This package provides BCP38 for IPv4 only - IPv6 uses source
specific default routes, so no firewall configuration is needed.

3kB2kBToke Høiland-Jørgensenpackages:pkgdata:bcp38, Bug reportspackages:pkgdata:bcp38, Sources
network---routing-and-redirectionbird22.13.1-1libc, libpthreadpackages:pkgdata:bird2, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
OSPFv3, RIPng, Babel and BGP protocols for IPv6.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.

This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
into a single branch, and also adds support for the Babel routing protocol.

349kB349kBGPL-2.0-or-laterToke Høiland-Jørgensenpackages:pkgdata:bird2, Bug reportspackages:pkgdata:bird2, Sources
network---routing-and-redirectionbird2cl2.0.8-1libc, bird2packages:pkgdata_owrt19_7:bird2cl, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD lightweight command-line client. It is used to send commands
to BIRD, commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

8kB7kBGPL-2.0-or-laterToke Høiland-Jørgensenpackages:pkgdata_owrt19_7:bird2cl, Bug reportspackages:pkgdata_owrt19_7:bird2cl, Sources
network---routing-and-redirectionbird2cl2.0.12-1libc, bird2BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD lightweight command-line client. It is used to send commands
to BIRD, commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

8kB7kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird2c2.0.11-1libc, librt, libpthread, bird2, libreadline8, libncurses6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.

10kB9kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbcp385-6libc, librt, libpthread, ipsetbcp38 implements IETF BCP38 for home routers.
See https://tools.ietf.org/html/bcp38.

This package provides BCP38 for IPv4 only - IPv6 uses source
specific default routes, so no firewall configuration is needed.

2kB2kBToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird22.0.12-1libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
OSPFv3, RIPng, Babel and BGP protocols for IPv6.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.

This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
into a single branch, and also adds support for the Babel routing protocol.

352kB352kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird2cl2.0.8-1libc, bird2BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD lightweight command-line client. It is used to send commands
to BIRD, commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

8kB7kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird2c2.0.8-1libc, bird2, libreadline8, libncurses6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.

9kB8kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird22.0.8-1libc, libssp, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
OSPFv3, RIPng, Babel and BGP protocols for IPv6.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.

This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
into a single branch, and also adds support for the Babel routing protocol.

283kB282kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbcp385-6libc, libssp, ipsetbcp38 implements IETF BCP38 for home routers.
See https://tools.ietf.org/html/bcp38.

This package provides BCP38 for IPv4 only - IPv6 uses source
specific default routes, so no firewall configuration is needed.

2kB2kBToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbcp385-4libc, libssp, ipsetbcp38 implements IETF BCP38 for home routers.
See https://tools.ietf.org/html/bcp38.

This package provides BCP38 for IPv4 only - IPv6 uses source
specific default routes, so no firewall configuration is needed.

2kB2kBToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird2cl2.13.1-1libc, bird2BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD lightweight command-line client. It is used to send commands
to BIRD, commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

8kB7kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird2c2.13.1-1libc, bird2, libreadline8, libncurses6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.

10kB9kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird22.13.1-1libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
OSPFv3, RIPng, Babel and BGP protocols for IPv6.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.

This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
into a single branch, and also adds support for the Babel routing protocol.

349kB349kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbcp385-11libcbcp38 implements IETF BCP38 for home routers.
See https://tools.ietf.org/html/bcp38.

This package provides BCP38 for IPv4 only - IPv6 uses source
specific default routes, so no firewall configuration is needed.

3kB2kBToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbcp385-2libc, libssp, ipsetbcp38 implements IETF BCP38 for home routers.
See https://tools.ietf.org/html/bcp38.

This package provides BCP38 for IPv4 only - IPv6 uses source
specific default routes, so no firewall configuration is needed.

2kB1kBToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionlldpd1.0.7-1libc, libevent2-7LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed
to supplant proprietary Link-Layer protocols such as
Extreme's EDP (Extreme Discovery Protocol) and
CDP (Cisco Discovery Protocol).
The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver
Link-Layer notifications to adjacent network devices.

148kB147kBISCStijn TintelBug reportsSources
network---routing-and-redirectionlldpd1.0.3-1libc, libssp, libevent2-7LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed
to supplant proprietary Link-Layer protocols such as
Extreme's EDP (Extreme Discovery Protocol) and
CDP (Cisco Discovery Protocol).
The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver
Link-Layer notifications to adjacent network devices.

107kB106kBISCStijn TintelBug reportsSources
network---routing-and-redirectionlldpd1.0.1-1libc, libevent2LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed
to supplant proprietary Link-Layer protocols such as
Extreme's EDP (Extreme Discovery Protocol) and
CDP (Cisco Discovery Protocol).
The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver
Link-Layer notifications to adjacent network devices.

130kB129kBISCStijn TintelBug reportsSources
network---routing-and-redirectionlldpd1.0.13-3libc, libcap, libevent2-7LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed
to supplant proprietary Link-Layer protocols such as
Extreme's EDP (Extreme Discovery Protocol) and
CDP (Cisco Discovery Protocol).
The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver
Link-Layer notifications to adjacent network devices.

124kB123kBISCStijn TintelBug reportsSources
network---routing-and-redirectionlldpd0.9.7-1libc, libssp, libevent2LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed
to supplant proprietary Link-Layer protocols such as
Extreme's EDP (Extreme Discovery Protocol) and
CDP (Cisco Discovery Protocol).
The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver
Link-Layer notifications to adjacent network devices.

107kB106kBISCStijn TintelBug reportsSources
network---routing-and-redirectionmcproxy2017-08-24-93b5ace422..9-3libc, librt, libpthread, libstdcpp6mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems.
It operates on the kernel tables for multicast routing and allows for multiple instantiations,
as well as dynamically changing downstream interfaces.

121kB120kBGPL-2.0+Steven BarthBug reportsSources
network---routing-and-redirectionmcproxy2017-08-24-93b5ace422..9-1libc, libpthread, libstdcpp6mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems.
It operates on the kernel tables for multicast routing and allows for multiple instantiations,
as well as dynamically changing downstream interfaces.

126kB125kBGPL-2.0+Steven BarthBug reportsSources
network---routing-and-redirectionmcproxy2017-08-24-93b5ace422..9-1libc, libpthread, libstdcppmcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems.
It operates on the kernel tables for multicast routing and allows for multiple instantiations,
as well as dynamically changing downstream interfaces.

119kB118kBGPL-2.0+Steven BarthBug reportsSources
network---routing-and-redirectionmcproxy2017-08-24-93b5ace4-9libc, librt, libpthread, libstdcpp6mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems.
It operates on the kernel tables for multicast routing and allows for multiple instantiations,
as well as dynamically changing downstream interfaces.

119kB118kBGPL-2.0-or-laterSteven BarthBug reportsSources
network---routing-and-redirectionmcproxy2014-12-31-b7bd2d0809..a-3libc, libpthread, libstdcppmcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems.
It operates on the kernel tables for multicast routing and allows for multiple instantiations,
as well as dynamically changing downstream interfaces.

121kB120kBGPL-2.0+Steven BarthBug reportsSources
network---routing-and-redirectionolsrd-mod-watchdog2021-06-12-4973feb5-8libc, librt, libpthread, olsrdWatchdog plugin

2kB1kBBSD-3-ClauseSaverio ProtoBug reportsSources
network---routing-and-redirectionolsrd-mod-txtinfo2021-06-12-4973feb5-8libc, olsrdSmall informative web server plugin

16kB15kBBSD-3-ClauseSaverio ProtoBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy