This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='network'

类别 名称版本依赖包描述信息软件包体积安装后大小授权方式维护人报告错误源代码
networkbwm-ng0.6.1-1libc, libsspBandwidth Monitor NG is a small and simple console-based live
network and disk io bandwidth monitor.

11kB10kBGPL2-2.0Julen Landa AlustizaBug reportsSources
networkbwm-ng0.6.1-1libc, librt, libpthreadBandwidth Monitor NG is a small and simple console-based live
network and disk io bandwidth monitor.

12kB11kBGPL2-2.0Julen Landa AlustizaBug reportsSources
networkbwm-ng0.6.3-1libcpackages:pkgdata:bwm-ng, Bandwidth Monitor NG is a small and simple console-based live
network and disk io bandwidth monitor.

11kB10kBGPL2-2.0Julen Landa Alustizapackages:pkgdata:bwm-ng, Bug reportspackages:pkgdata:bwm-ng, Sources
networkbwping2.5-1libcBWPing is a tool to measure bandwidth and response times between two
hosts using Internet Control Message Protocol (ICMP) echo request/echo
reply mechanism. It does not require any special software on the remote
host. The only requirement is the ability to respond on ICMP echo request
messages. BWPing supports both IPv4 and IPv6 networks.

8kB7kBBSD-2-ClauseOleg DerevenetzBug reportsSources
networkbwping2.2-1libcBWPing is a tool to measure bandwidth and response times between two
hosts using Internet Control Message Protocol (ICMP) echo request/echo
reply mechanism. It does not require any special software on the remote
host. The only requirement is the ability to respond on ICMP echo request
messages. BWPing supports both IPv4 and IPv6 networks.

7kB6kBBSD-2-ClauseOleg DerevenetzBug reportsSources
networkbwping2.5-1libcpackages:pkgdata:bwping, BWPing is a tool to measure bandwidth and response times between two
hosts using Internet Control Message Protocol (ICMP) echo request/echo
reply mechanism. It does not require any special software on the remote
host. The only requirement is the ability to respond on ICMP echo request
messages. BWPing supports both IPv4 and IPv6 networks.

8kB7kBBSD-2-ClauseOleg Derevenetzpackages:pkgdata:bwping, Bug reportspackages:pkgdata:bwping, Sources
networkchat2.4.7-12libcThis package contains an utility to establish conversation with other PPP servers
(via a modem).

9kB8kBBSD-4-ClauseFelix FietkauBug reportsSources
networkchat2.4.9.git-2021-01-04-3libcThis package contains an utility to establish conversation with other PPP servers
(via a modem).

10kB9kBBSD-4-ClauseFelix FietkauBug reportsSources
networkchat2.4.7-12libc, libsspThis package contains an utility to establish conversation with other PPP servers
(via a modem).

8kB7kBBSD-4-ClauseFelix FietkauBug reportsSources
networkchat2.4.7.git-2019-05-25-3libcThis package contains an utility to establish conversation with other PPP servers
(via a modem).

9kB8kBBSD-4-ClauseFelix FietkauBug reportsSources
networkchat2.4.8.git-2020-10-03-3libcThis package contains an utility to establish conversation with other PPP servers
(via a modem).

10kB9kBBSD-4-ClauseFelix FietkauBug reportsSources
networkchat2.4.9.git-2021-01-04-3libcpackages:pkgdata:chat, This package contains an utility to establish conversation with other PPP servers
(via a modem).

10kB9kBBSD-4-ClauseFelix Fietkaupackages:pkgdata:chat, Bug reportspackages:pkgdata:chat, Sources
networkcifsmount6.4-2libc, kmod-fs-cifsCIFS mount utilities

12kB12kBGPL-3.0Florian FainelliBug reportsSources
networkcifsmount6.11-2libc, kmod-fs-cifsCIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networkcifsmount6.8-1libc, kmod-fs-cifsCIFS mount utilities

12kB11kBGPL-3.0Florian FainelliBug reportsSources
networkcifsmount6.9-1libc, kmod-fs-cifsCIFS mount utilities

12kB11kBGPL-3.0Florian FainelliBug reportsSources
networkcifsmount6.11-2libc, kmod-fs-cifsCIFS mount

13kB13kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networkcifsmount6.11-2libc, kmod-fs-cifspackages:pkgdata:cifsmount, CIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:cifsmount, Bug reportspackages:pkgdata:cifsmount, Sources
networkcifsmount6.8-1libc, kmod-fs-cifspackages:pkgdata_owrt18_6:cifsmount, CIFS mount utilities

12kB11kBGPL-3.0Florian Fainellipackages:pkgdata_owrt18_6:cifsmount, Bug reportspackages:pkgdata_owrt18_6:cifsmount, Sources
networkcni-route-override0.1-1libcroute-override IPAM works as meta CNI plugin to override IP route given by previous CNI plugins.

777kB777kBApache-2.0Oskari RautaBug reportsSources
networkcni-route-override0.1-1libcpackages:pkgdata:cni-route-override, route-override IPAM works as meta CNI plugin to override IP route given by previous CNI plugins.

777kB777kBApache-2.0Oskari Rautapackages:pkgdata:cni-route-override, Bug reportspackages:pkgdata:cni-route-override, Sources
networkcoap-server4.3.0-2libc, librt, libpthread, libcoap3Constrained Application Protocol (RFC 7252) server and resource directory server

0kB0kBGPL-2.0-or-later BSD-2-ClauseAnton GlukhovBug reportsSources
networkcoap-serverv4.1.2-1libc, libcoapConstrained Application Protocol (RFC 7252) server and resource directory server

10kB9kBGPL-2.0+ BSD-2-ClauseAnton GlukhovBug reportsSources
networkcoap-server4.2.0-2libc, libcoap2Constrained Application Protocol (RFC 7252) server and resource directory server

14kB13kBGPL-2.0-or-later BSD-2-ClauseAnton GlukhovBug reportsSources
networkcoap-server4.2.1-1libc, libcoap2Constrained Application Protocol (RFC 7252) server and resource directory server

15kB15kBGPL-2.0-or-later BSD-2-ClauseAnton GlukhovBug reportsSources
networkcoap-server4.3.0-2libc, librt, libpthread, libcoap3packages:pkgdata:coap-server, Constrained Application Protocol (RFC 7252) server and resource directory server

0kB0kBGPL-2.0-or-later BSD-2-ClauseAnton Glukhovpackages:pkgdata:coap-server, Bug reportspackages:pkgdata:coap-server, Sources
networkconserver8.2.6-1libc, libopenssl1.1Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

111kB110kBBSD-3-ClauseBjørn MorkBug reportsSources
networkconserver8.2.1-1libc, libssp, libopensslpackages:pkgdata:conserver, Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

93kB92kBBSD-3-ClauseBjørn Morkpackages:pkgdata:conserver, Bug reportspackages:pkgdata:conserver, Sources
networkconserver8.2.1-1libc, libopensslConserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

105kB104kBBSD-3-ClauseBjørn MorkBug reportsSources
networkconserver8.2.4-1libc, libopenssl1.1Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

103kB102kBBSD-3-ClauseBjørn MorkBug reportsSources
networkconserver8.2.6-1libc, libopenssl1.1Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

112kB111kBBSD-3-ClauseBjørn MorkBug reportsSources
networkconserver8.2.1-1libc, libopensslpackages:pkgdata_owrt18_6:conserver, Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

105kB104kBBSD-3-ClauseBjørn Morkpackages:pkgdata_owrt18_6:conserver, Bug reportspackages:pkgdata_owrt18_6:conserver, Sources
networkcrowdsec1.5.4-1libcCrowdsec - An open-source, lightweight agent to detect
and respond to bad behaviours.
It also automatically benefits from a global
community-wide IP reputation database.

This package contains the main program.

54784kB54900kBMITGerald KermaBug reportsSources
networkcrowdsec1.3.0-3libcCrowdsec - An open-source, lightweight agent to detect
and respond to bad behaviours.
It also automatically benefits from a global
community-wide IP reputation database.

This package contains the main program.

16445kB16518kBMITGerald KermaBug reportsSources
networkcrowdsec1.5.4-1libcpackages:pkgdata:crowdsec, Crowdsec - An open-source, lightweight agent to detect
and respond to bad behaviours.
It also automatically benefits from a global
community-wide IP reputation database.

This package contains the main program.

54784kB54900kBMITGerald Kermapackages:pkgdata:crowdsec, Bug reportspackages:pkgdata:crowdsec, Sources
networkcrowdsec-firewall-bouncer0.0.28-2libcCrowdsec bouncer written in golang for firewalls.

crowdsec-firewall-bouncer will fetch new and old decisions
from a CrowdSec API to add them in a blocklist used by supported firewalls.

You must install nftables.

This package contains the main program.

4264kB4274kBMITGerald KermaBug reportsSources
networkcrowdsec-firewall-bouncer0.0.21-3libcCrowdsec bouncer written in golang for firewalls.

crowdsec-firewall-bouncer will fetch new and old decisions
from a CrowdSec API to add them in a blocklist used by supported firewalls.

You must install iptables+ipset or nftables.

This package contains the main program.

3057kB3064kBMITGerald KermaBug reportsSources
networkcshark2015-11-24-e575ab3d35..e-2libc, libssp, libjson-c, libpcap, libuci, libubox, libuclient, libustream-mbedtlsCloudShark capture tool

8kB7kBLuka PerkovBug reportsSources
networkcshark2020-07-22-c0d32fb6-2libc, libjson-c5, libpcap1, libuci20130104, libubox20220515, libuclient20201210, libustream-mbedtls20201210CloudShark capture tool

8kB7kBBSD-2-ClauseLuka PerkovBug reportsSources
networkcshark2018-08-20-7a7cf7f350..b-1libc, libjson-c, libpcap, libuci, libubox, libuclient, libustream-mbedtlsCloudShark capture tool

9kB8kBLuka PerkovBug reportsSources
networkcshark2018-08-20-7a7cf7f350..b-1libc, libjson-c2, libpcap1, libuci20130104, libubox20191228, libuclient20160123, libustream-mbedtls20150806CloudShark capture tool

9kB8kBLuka PerkovBug reportsSources
networkcshark2018-08-20-7a7cf7f3-1libc, librt, libpthread, libjson-c5, libpcap1, libuci20130104, libubox20210516, libuclient20201210, libustream-mbedtls20201210CloudShark capture tool

10kB9kBBSD-2-ClauseLuka PerkovBug reportsSources
networkcshark2020-07-22-c0d32fb6-2libc, libjson-c5, libpcap1, libuci20130104, libubox20220515, libuclient20201210, libustream-mbedtls20201210packages:pkgdata:cshark, CloudShark capture tool

8kB7kBBSD-2-ClauseLuka Perkovpackages:pkgdata:cshark, Bug reportspackages:pkgdata:cshark, Sources
networkdaemonlogger1.2.1-1libc, libpcap, libdnetSoftware Network Tap

10kB9kBGPL-2.0Mirko VogtBug reportsSources
networkdaemonlogger1.2.1-1libc, libpcap1, libdnetSoftware Network Tap

10kB10kBGPL-2.0Mirko VogtBug reportsSources
networkdaemonlogger1.2.1-1libc, libssp, libpcap, libdnetSoftware Network Tap

10kB9kBGPL-2.0Mirko VogtBug reportsSources
networkdaemonlogger1.2.1-1libc, libpcap1, libdnetSoftware Network Tap

10kB9kBGPL-2.0Mirko VogtBug reportsSources
networkdaemonlogger1.2.1-1libc, librt, libpthread, libpcap1, libdnetSoftware Network Tap

11kB11kBGPL-2.0Mirko VogtBug reportsSources
networkdaemonlogger1.2.1-1libc, libpcap1, libdnetpackages:pkgdata:daemonlogger, Software Network Tap

10kB10kBGPL-2.0Mirko Vogtpackages:pkgdata:daemonlogger, Bug reportspackages:pkgdata:daemonlogger, Sources
networkdaemonlogger1.2.1-1libc, libssp, libpcap, libdnetpackages:pkgdata_owrt18_6:daemonlogger, Software Network Tap

10kB9kBGPL-2.0Mirko Vogtpackages:pkgdata_owrt18_6:daemonlogger, Bug reportspackages:pkgdata_owrt18_6:daemonlogger, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy