This translation is older than the original page and might be outdated. See what has changed.

软件包列表

点击软件包分类可直接对下方 软件包列表 进行筛选,您也可以输入内容手动筛选。

按类别筛选

为了不影响您的体验,每页只显示50个软件包。

  • 点击左下角“下一页”或“上一页”以便显示前50或后50个软件包。
  • 点击表头可对按对应字段对内容进行排序。
  • 反白框 输入您的筛选条件。

当您点击下表中的软件包名称后,将默认打开该软件包的独有页面及相关文档。如果没有,动一动手指添加。

Filtered by categories='network'

类别名称版本依赖包描述信息软件包体积安装后大小授权方式 维护人报告错误源代码
networktac_plus-pam4.0.4.28-2libc, libssp, libpamTACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built with PAM support.

39kB38kBcommon packages maintainersBug reportsSources
networkrsyslog8.39.0-2libc, libestr, libfastjson, libuuid1, zlibEnhanced system logging and kernel message trapping daemons

302kB302kBGPL-3.0common packages maintainersBug reportsSources
networkpen0.34.1-3libc, libssp, libopenssl1.1This is pen, a load balancer for “simple” TCP based protocols
such as HTTP or SMTP. It allows several servers to appear as
one to the outside and automatically detects servers that are
down and distributes clients among the available servers.
This gives high availability and scalable performance.

47kB46kBGPL-2.0-or-latercommon packages maintainersBug reportsSources
networkjool-tools3.5.7-2libc, libnl200, ethtoolJool is an Open Source SIIT and NAT64 for Linux.

This package provides the userspace control programs for Jool.

69kB68kBGPL-2.0common packages maintainersBug reportsSources
networkxinetd2.3.15-5libc, libsspxinetd has access control mechanisms, extensive logging capabilities,
the ability to make services available based on time, can place limits
on the number of servers that can be started, and has deployable
defence mechanisms to protect against port scanners, among other
things.

50kB49kBxinetdcommon packages maintainersBug reportsSources
networkmtr0.85+newdns-dd2b75080..b-2libc, libssp, libncursesmtr combines the functionality of the 'traceroute' and 'ping' programs
in a single network diagnostic tool.
As mtr starts, it investigates the network connection between the host
mtr runs on and a user-specified destination host. After it
determines the address of each network hop between the machines,
it sends a sequence ICMP ECHO requests to each one to determine the
quality of the link to each machine. As it does this, it prints
running statistics about each machine.

21kB20kBGPL-2.0+common packages maintainersBug reportsSources
networkfoolsm1.0.10-1libc, libssp, ssmtpfoolsm is a link state monitor for carrying out actions when a link
transistions from the up to down state or vice versa.

26kB25kBcommon packages maintainersBug reportsSources
networkudptunnel1.1-1libcUDPTunnel is a small program which can tunnel UDP packets bi-directionally
over a TCP connection. Its primary purpose (and original motivation) is to
allow multi-media conferences to traverse a firewall which allows only outgoing
TCP connections.

5kB4kBBSD-3-Clausecommon packages maintainersBug reportsSources
networktac_plus4.0.4.28-2libcTACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built without PAM support.

42kB41kBcommon packages maintainersBug reportsSources
networktac_plus-pam4.0.4.28-2libc, libpamTACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built with PAM support.

48kB47kBcommon packages maintainersBug reportsSources
networksmbinfo6.11-2libc, kmod-fs-cifsSMB info

8kB8kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networksamba4-utils4.18.8-1libc, samba4-libsinstalls: smbstatus smbtree mvxattr smbtar (smbcquotas)

Utilities collection

31kB31kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-libs4.18.8-1libc, libtirpc, libreadline8, libpopt0, libcap, zlib, libgnutls, libtasn1, libuuid1, libopenssl1.1, libpthread, liburing, libpam, attr, libavahi-clientSamba 4.18.8 libs

8765kB8820kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-client4.18.8-1libc, samba4-libsinstalls: cifsdd smbclient smbget

The smbclient program implements a simple ftp-like client for accessing SMB shares

95kB95kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networkrpcbind1.2.6-2libc, libtirpc, libwrapThe rpcbind utility is a server that converts RPC program numbers into universal addresses.
It must be running on the host to be able to make RPC calls on a server on that machine.

Rpcbind replaces portmap for NFS v2/v3. It has more features, like ipv6 support.
Note: Nfs4 only configurations can run without it.

29kB28kBBSD-3-Clausecommon packages maintainersBug reportsSources
networknut-driver-victronups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for IMV/Victron UPS unit Match

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-upscode22.7.4-27libc, librt, libpthread, nut, nut-serverDriver for UPScode II compatible UPS equipment

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-tripplitesu2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Tripp-Lite SmartOnline (SU) UPS equipment

20kB20kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-tripplite2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Tripp-Lite SmartPro UPS equipment

19kB19kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-solis2.7.4-27libc, nut, nut-serverDriver for Brazilian Microsol SOLIS UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-safenet2.7.4-27libc, nut, nut-serverDriver for SafeNet compatible UPS equipment

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-riello_ser2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Riello UPS Protocol UPS equipment

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-rhino2.7.4-27libc, nut, nut-serverDriver for Brazilian Microsol RHINO UPS equipment

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-powerpanel2.7.4-27libc, nut, nut-serverDriver for PowerPanel Plus compatible UPS equipment

29kB29kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-powercom2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for serial Powercom/Trust/Advice UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-oneac2.7.4-27libc, nut, nut-serverDriver for Oneac UPS equipment

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-oldmge-shut2.7.4-27libc, nut, nut-serverDriver for SHUT Protocol UPS equipment

32kB31kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-microdowell2.7.4-27libc, nut, nut-serverDriver for Microdowell Enterprise UPS series

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-mge-utalk2.7.4-27libc, nut, nut-serverDriver for MGE UPS SYSTEMS UTalk protocol equipment

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-mge-shut2.7.4-27libc, nut, nut-serverDriver for SHUT Protocol UPS equipment

46kB45kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-metasys2.7.4-27libc, nut, nut-serverDriver for Meta System UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-masterguard2.7.4-27libc, nut, nut-serverDriver for Masterguard UPS equipment

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-liebert2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Liebert contact-closure UPS equipment

17kB16kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-liebert-esp22.7.4-27libc, nut, nut-serverDriver for Liebert UPS

24kB23kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-ivtscd2.7.4-27libc, nut, nut-serverDriver for the IVT Solar Controller Device

18kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-isbmex2.7.4-27libc, nut, nut-serverDriver for ISBMEX UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-genericups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for contact-closure UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-gamatronic2.7.4-27libc, nut, nut-serverDriver for Gamatronic UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-everups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Ever UPS models

17kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-etapro2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for ETA UPS equipment

18kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-dummy-ups2.7.4-27libc, nut, nut-serverDriver for multi-purpose UPS emulation

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-clone2.7.4-27libc, nut, nut-serverUPS driver clone

46kB45kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-blazer_ser2.7.4-27libc, nut, nut-serverDriver for Megatec/Q1 protocol serial based UPS equipment

28kB27kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bestups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Best Power / SOLA (Phoenixtec protocol) UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bestuferrups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Best Power Micro-Ferrups

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bestfortress2.7.4-27libc, nut, nut-serverDriver for old Best Fortress UPS equipment

23kB23kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bestfcom2.7.4-27libc, nut, nut-serverDriver for Best Power Fortress/Ferrups

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-belkinunv2.7.4-27libc, nut, nut-serverDriver for Belkin “Universal UPS” and compatible

22kB21kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-belkin2.7.4-27libc, nut, nut-serverDriver for Belkin serial UPS equipment

24kB23kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-bcmxcp2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for UPSes supporting the serial BCM/XCP protocol

31kB30kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/05/08 14:02
  • by lujimmy