Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
zh:docs:guide-user:network:switch_router_gateway_and_nat [2021/07/01 07:36] – [Switches and client APs] biajizh:docs:guide-user:network:switch_router_gateway_and_nat [2021/07/01 07:44] – [OpenWrt as wireless access point (wireless-to-wired switch)] biaji
Line 51: Line 51:
   
 Note that for all of these upstream connection variants, the following applies: Note that for all of these upstream connection variants, the following applies:
 +
   * all variants can handle both wireless and wired clients on the downstream side (i.e. client devices connected to your LAN)   * all variants can handle both wireless and wired clients on the downstream side (i.e. client devices connected to your LAN)
   * all variants can host software services for both downstream and upstream sides (like NAS shares)   * all variants can host software services for both downstream and upstream sides (like NAS shares)
Line 149: Line 150:
 Note: In case you are interested in creating a so called "wireless mesh" instead of a wireless repeater, you will have to refer to other projects, e.g. [[https://libremesh.org/]] or [[https://open-mesh.org/]] at this time. Note: In case you are interested in creating a so called "wireless mesh" instead of a wireless repeater, you will have to refer to other projects, e.g. [[https://libremesh.org/]] or [[https://open-mesh.org/]] at this time.
  
-===== OpenWrt as wireless access point (wireless-to-wired switch)===== +===== OpenWrt作为无线接入点(无线到有线交换机)===== 
-Follow: [[docs:guide-user:network:wifi:dumbap|Wi-Fi access point]]+遵循: [[docs:guide-user:network:wifi:dumbap|Wi-Fi接入点]]
  
-As a wireless access point, OpenWrt connects to the existing network by wire. OpenWrt then acts as a networking device that allows your Wi-Fi devices to connect to the wired network over OpenWrt.  +作为一个无线接入点,OpenWrt将以有线连接至现存网络。供您的无线设备经由OpenWrt连接至有线网络所用。 
-  * the wired network provides Internet access+  * 有线网络提供因特网访问
   * OpenWrts upstream side (the other wired network it will connect to) will be a wired connection to the existing router. So OpenWrt acts as a client of this existing other network.   * OpenWrts upstream side (the other wired network it will connect to) will be a wired connection to the existing router. So OpenWrt acts as a client of this existing other network.
   * OpenWrts downstream side (the Wi-Fi network that OpenWrt will provide) will be an access point for your wireless clients   * OpenWrts downstream side (the Wi-Fi network that OpenWrt will provide) will be an access point for your wireless clients
  • Last modified: 2022/03/17 10:11
  • by biaji