Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
zh-tw:toh:d-link:dir-615 [2018/03/04 08:32] – ↷ Links adapted because of a move operation zh-tw:toh:d-link:dir-615 [2018/03/04 12:12] bobafetthotmail
Line 62: Line 62:
   - 按 "Browse" 並選 OpenWrt 軔體(firmware) (如: 'openwrt-ar71xx-dir-615-c1-squashfs-factory.bin').   - 按 "Browse" 並選 OpenWrt 軔體(firmware) (如: 'openwrt-ar71xx-dir-615-c1-squashfs-factory.bin').
   - 讓 Router 自行更新軔體, 不需擔心未到 100% 就重新啟動. 如果網頁一直無法呈現或逾時(times out), 表示您的瀏灠器不支援. 見底下說明.   - 讓 Router 自行更新軔體, 不需擔心未到 100% 就重新啟動. 如果網頁一直無法呈現或逾時(times out), 表示您的瀏灠器不支援. 見底下說明.
-  - 經由 DHCP 向 Router 取得新的 IP, 並繼續 [[doc:howto:firstlogin|初次登入]] 步驟.+  - 經由 DHCP 向 Router 取得新的 IP, 並繼續 [[docs:guide-quick-start:walkthrough_login|初次登入]] 步驟.
  
 === 瀏灠器 (Web Browser) 問題 === === 瀏灠器 (Web Browser) 問題 ===
Line 123: Line 123:
 3. Upload the firmware. If the upload does not start, just try another browser, e.g. Firefox. 3. Upload the firmware. If the upload does not start, just try another browser, e.g. Firefox.
  
-4. Perform initial configuration ([[:doc:howto:firstlogin|First login]]).+4. Perform initial configuration ([[:docs:guide-quick-start:walkthrough_login|First login]]).
  
 5. There could be a problem, that the WAN connection is not automatically configured because the 'wan' interface is not enabled during boot. To fix it: 5. There could be a problem, that the WAN connection is not automatically configured because the 'wan' interface is not enabled during boot. To fix it:
  • Last modified: 2018/06/07 19:24
  • by tmomas