User Tools

Site Tools


zh-cn:doc:howto:imagebuilder

镜像生成器

映像生成器 是一个创建自定义固件的预编译环境,可以在现有固件的基础编辑创建镜像。

使用映像生成器的原因:

  • 创建最小化镜像如去除WEB界面
  • 软件包直接嵌入squashfs,减少目标平台的空间需求
  • 配置文件直接嵌入squashfs作为预配置

下载

ImageBuilder随着OpenWrt Kamikaze神风8.09.2版本中,并就在服务器上提供下载。

  • 浏览OpenWrt下载目录

http://kamikaze.openwrt.org/8.09.2/

  • 点击你路由器的架构, 例如brcm-2.4 架构的WRT54GL映像
  • 下载ImageBuilder存档。使用 i686在32位系统或x86_64 基于64位的系统
  • 提取档案和目录更改到ImageBuilder
$ wget http://kamikaze.openwrt.org/...-for-Linux-i686.tar.bz2 $ tar -xjf OpenWrt-ImageBuilder-brcm-2.4-for-Linux-i686.tar.bz2 $ cd OpenWrt-ImageBuilder-brcm-2.4-for-Linux-i686/

用法

The make image command will create a minimal image with just essential packages included, the behaviour can be controlled with three variables passed as arguments:

  • PROFILE - specifies the target image to build
  • PACKAGES - a list of packages to embed into the image
  • FILES - directory with custom files to include

见下一章节的阐释。

After the make command is finished, the generated images are stored in the bin directory.

$ ls bin/ md5sums openwrt-wrt350n_v1-squashfs.bin openwrt-brcm-2.4-squashfs.trx openwrt-wrt54g-squashfs.bin openwrt-usr5461-squashfs.bin openwrt-wrt54g3g-em-squashfs.bin openwrt-wa840g-squashfs.bin openwrt-wrt54g3g-squashfs.bin openwrt-we800g-squashfs.bin openwrt-wrt54gs-squashfs.bin openwrt-wr850g-squashfs.bin openwrt-wrt54gs_v4-squashfs.bin openwrt-wrt150n-squashfs.bin openwrt-wrtsl54gs-squashfs.bin openwrt-wrt300n_v1-squashfs.bin

概况

Run make info to obtain a list of defined profiles:

$ make info Current Target: “brcm-2.4” Default Packages: base-files libgcc … kmod-switch kmod-diag nvram Available Profiles: Broadcom: Generic, Broadcom WiFi (default) Packages: kmod-brcm-wl wlc nas kmod-wlcompat BroadcomMimo: Generic, Broadcom WiFi (MIMO) Packages: kmod-brcm-wl-mimo wlc nas kmod-wlcompat None: Generic, No WiFi Packages: USBGeneric: Generic USB Packages: kmod-brcm-wl kmod-usb-core kmod-usb-ohci kmod-usb2 … WL500G: ASUS WL-500g Packages: kmod-brcm-wl kmod-usb-core kmod-usb-ohci kmod-lp … WL500GD: ASUS WL-500g Deluxe Packages: kmod-brcm-wl kmod-usb-core kmod-usb-uhci kmod-usb2 … WL500GP: ASUS WL-500g Premium Packages: kmod-brcm-wl kmod-usb-core kmod-usb-uhci-iv … WL700GE: WL-700gE Packages: -ppp -ppp-mod-pppoe -kmod-ipt-nathelper -iptables … WLHDD: WL-HDD Packages: kmod-brcm-wl kmod-usb-core kmod-usb-ohci … WRT54G3G: Linksys WRT54G3G Packages: kmod-brcm-wl kmod-usb-core kmod-usb-ohci kmod-usb2 …

… and pass the appropriate profile to the make command:

$ make image PROFILE=WL500GP

软件包

The PACKAGES variable specifies a list of packages to include when building an image. If a name is prefixed with - then the corresponding package will be excluded from the image.

$ make image PROFILE=WL500GP PACKAGES=“nano openvpn -ppp -ppp-mod-pppoe”

Tip贴士: 查看当前已安装的软件包列表可以使用如下命令:

root@OpenWrt:~# echo `opkg list_installed | awk '{ print $1 }'`

文件

A directory with custom files to add can be specified using the FILES variable. Custom files will replace default ones if necessary.

$ mkdir -p files/etc/config $ scp root@192.168.1.1:/etc/config/network files/etc/config/ $ scp root@192.168.1.1:/etc/config/wireless files/etc/config/ $ scp root@192.168.1.1:/etc/config/firewall files/etc/config/ $ make image PROFILE=WL500GP PACKAGES=“nano openvpn -ppp -ppp-mod-pppoe” FILES=files/

清理临时文件

清理临时文件 要清理建立和生成映像时的临时文件,请使用make clean 命令。

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
zh-cn/doc/howto/imagebuilder.txt · Last modified: 2010/12/18 07:20 (external edit)