参 beginner's guide页。
查阅 current TableOfHardware 此支持设备列表页。
Flash devices can be written to, at minimum, anywhere between 100,000 and 1,000,000 times (according to the manufacturers). Keep in mind we have a normal distribution and also, that Flash never ever just stops working, but merely distinct blocks do. I.e. you won't be able to write to them any longer, but you should be able to still read them.
Start here → build-system
There are claims all over the web, that OpenWrt can only be handled by command-line. That is bullshit. As a matter of fact, there are 3 (three) WebUIs available for OpenWrt: LuCI, X-Wrt and Gargoyle
Although there is actually no reason to fear the CLI.
Also, please do note, that the X Window System is available for OpenWrt as well!
wl(or wl-mimo) proprietary driver,
b43reverse engineered FOSS driver,
wpad(hostapd + wpa_supplicant), standard linux utilites (
It is reported as still debatable which wireless driver is better for stability and performance. brcm-2.4 is still available in the latest OpenWrt stable, but has been abandoned in trunk as of Rxxxxx.
ifdef CONFIG_MADWIFI_DEBUG MADWIFI_APPLETS += athdebug 80211debug endif
So first enable the “Advanced configuration options (for developers)” item, then navigate to the kmod-madwifi submenu and tick “Enable compilation of debugging features” on or add/replace “CONFIG_DEVEL=y” plus “CONFIG_MADWIFI_DEBUG=y” manually in .config
CONFIG_ALL=y + make V=99 IGNORE_ERRORS=m