Search
You can find the results of your search below.
Fulltext results:
- 在OpenWrt上启用Wi-Fi @zh:docs:guide-quick-start
- ps://git.kernel.org/pub/scm/linux/kernel/git/wens/wireless-regdb.git/tree/db.txt|这个]]文件。在这里,按照[[wp>ISO 3166-... Wrt设备:''$ ssh root@192.168.1.1'' * 执行''uci show wireless''以查看所有无线配置以及设备上有多少个Wi-Fi芯片(在配置中称为“radio”)。识别出您要针对... radio1'', ''radio2'', ''radioX''。 * 执行''uci set wireless.radio**N**.country='XX' ''为每个(N = 0, 1, 2)无线电台设备设置国家代码XX。请参阅本页的第一部分。 * 执行''uci set wireless.radio**N**.disabled='0' ''以启用所述的所有无线电台。 * 执行更改:
- 使用Image Builder @zh:docs:guide-user:additional-software
- iles/etc/config/ scp root@192.168.1.1:/etc/config/wireless files/etc/config/ scp root@192.168.1.1:/etc/confi
- Wi-Fi漫游 @zh:docs:guide-user:network:wifi
- 400|}} 当使用802.11r时,这可以在每个关联请求帧中找到,在''IEEE 802.11 Wireless Management'' -> ''Tagged parameters'' -> ''RSN In... ttps://youtu.be/4Ua2lI6HBhE?&t=24|A talk given at Wireless Lan Professionals Conference 2019 entitled "Effec
- 基于802.11的无线mesh网状网络 @zh:docs:guide-user:network:wifi:mesh
- 进行任何修剪以减小其大小。 ==== 无线网络配置 ==== 编辑 ''/etc/config/wireless'' 并确定: * ''radio0'' 没有设置为 disabled,或者disabled设置... b/master/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh|mac80211.sh Source]]: * MP_CONFIG_I... 种新的基于 nl80211 的wireless devices命令行实用配置工具.[[http://wireless.kernel.org/en/users/Documentation/iw#About_iw|mor... good background article]] from CWNP * [[https://wireless.wiki.kernel.org/en/developers/Documentation/ieee8
- Dnsmasq DHCP 服务器 @zh:docs:guide-user:base-system
- [google>windows 7 create bridge|bridge]] from the wireless and ethernet interfaces on your client * Add ... rface, making your laptop IPv6-disabled when only wireless is up. - Another solution is IPv6 friendly, you... * When you plug the ethernet cable in, disable wireless interface in control panel (power off wireless won't do it). * When you unplug ethernet cable, enable w
- DHCP and DNS configuration /etc/config/dhcp @zh:docs:guide-user:base-system
- d in ''/etc/config/network'' and in ''/etc/config/wireless'', so double check! ==== Static leases ==== You
- UCI默认设置 @zh:docs:guide-developer
- << EOI set network.lan.ipaddr='192.168.178.1' set wireless.@wifi-device[0].disabled='0' set wireless.@wifi-iface[0].ssid='OpenWrt0815' add dhcp host set dhcp.@host[-1
- 通过FTP安装Openwrt (通用) @zh:docs:guide-user:installation
- dt" - a german non-commercial initiative for free wireless networks - to flash AVM devices. [[https://fritz
- Wifi Toggle @zh:docs:guide-user:network:wifi
- bin/woggle #!/bin/sh device="wl0" case $(uci get wireless.$device.disabled) in 0) wifi down $de... echo 1 > /proc/diag/led/power uci set wireless.$device.disabled=1 echo "Wifi disabled" ;; 1) uci set wireless.$device.disabled=0 wifi up $device ... OF" > /sbin/woggle-old #!/bin/sh case "$(uci get wireless.@wifi-device[0].disabled)" in 1) uci
- Linux 网络接口(Network Interfaces) @zh:docs:guide-developer:networking
- 例如: [[wp>Network interface controller|NIC]], [[wp>Wireless network interface controller|WNIC]] 或 其他一些 [[wp>M... or incoming network packet * <color maroon>**//wireless operating mode virtual interfaces//**</color>: ''... th_monitor'', ..\\ [[docs:guide-user:network:wifi:wireless.overview|Linux wireless subsystem]]:针对每个WNIC总是一个成为主要接口的物理网络接口相对应。这个主要接口是不可见的。 Then, depending on the wirele
- 驱动 @zh:docs:guide-developer
- .org/main/index.php/Matrix:Main|ALSA]], [[https://wireless.kernel.org]], [[http://wiki.ubuntuusers.de/Hardwa
- AP 桥接模式 @zh:docs:guide-user:network:wifi
- to extend your existing wired host router to have wireless capabilities. Clients connecting to OpenWRT will ... antage of bridging is that broadcast traffic from Wireless to LAN and vice versa works without further chang... [[docs:guide-user:network:wifi:basic|/etc/config/wireless]] ==== Step 1: Change the LAN interface ==== Ed... intenance. ==== Step 2: Configure and enable the wireless network ==== In ''/etc/config/wireless'', locate
- 无线接入点 / 哑接入点 @zh:docs:guide-user:network:wifi
- 。//所以,在默认安装下,最后您需要检查无线接入点设置,启用无线安全,并在//Network -> Wireless//启用无线网络。 - 点击//保存并启用//按钮。\\ - 用网线连接主路由的LAN插口和... [[docs:guide-user:network:wifi:basic|/etc/config/wireless]] ==== Step 1: Modify the Network ==== Edit ''/... opriate </code> ==== Step 2: Change the existing wireless network ==== Edit ''/etc/config/wireless'', and don't worry about most of it, things that might need chang
- 路由器、交换机、网关及NAT @zh:docs:guide-user:network
- 换机或客户端AP ====== | single | 三种用法: \\ [[#openwrt_as_wireless_repeater_wifi_wifi_switch|OpenWrt作为无线中继(Wi-Fi <-> Wi-Fi交换机)]] \\ [[#openwrt_as_wireless_access_point_wifi_wired_switch|OpenWrt作为无线接入点(Wi-... lowing applies: * all variants can handle both wireless and wired clients on the downstream side (i.e. cl... half bridge), this is for you. ===== OpenWrt as wireless repeater (wireless-to-wireless switch) ===== Foll
- 节省固件空间 @zh:docs:guide-user:additional-software
- ONFIG_PACKAGE_MAC80211_DEBUGFS | Kernel modules / Wireless Drivers / kmod-mac80211 / Export mac80211 interna... ONFIG_PACKAGE_MAC80211_MESH | Kernel modules / Wireless Drivers / kmod-mac80211 / Enable 802.11s mesh sup