Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- Wi-Fi Extender/Repeater with relayd @docs:guide-user:network:wifi
- [:docs:guide-user:network:wifi:wifiextenders:wds]|Wireless Repeater/Extender with WDS]] or [[docs:guide-user... he **Wi-Fi extender** is on the left. It makes a wireless uplink connection (labeled "W-LAN (Client)") to t... cal connections. * Navigate to the **Network -> Wireless** page * Choose the radio for the uplink to the... ==== At this point, the Wi-Fi extender should be wirelessly connected to the main router. To verify the con
- 802.11s - The Mesh11sd Project @docs:guide-user:network:wifi:mesh
- cs:guide-user:network:wifi:mesh:802-11s | 802.11s Wireless Mesh Networking]] ===== 1. Overview ===== ==== Wh... en remove all mesh configuration from /etc/config/wireless before installing the new version. ==== Manual or... If the mesh network interface is defined in the wireless configuration file, mesh11sd will attempt to use ... default in auto_config mode, Mesh11sd checks the wireless configuration for mesh options in addition to che
- Connect to client Wi-Fi network @docs:guide-user:network:wifi
- e you are logged into the router, * go in the wireless networks page, and click on **Scan** button. /**... g|}}\\ ***/ * Recommend to tick the 'Replace wireless configuration' to delete the wireless access point (Master) for the chosen radio. * Enter the wifi passw... set to wan/wan6 (default). \\ {{media:docs:howto:wireless_client_wifi_1.jpg?500|}} \\ * If there is no
- How to use LTE modem in QMI mode for WAN connection @docs:guide-user:network:wan:wwan
- http://intelnuc.blogspot.ru/2014/10/turn-your-old-wireless-router-into-lte.html| This Article]] ==== Troubl... vered that need to reset my modem (tested on Dell Wireless 5804 413c:819b) in boot process, so you can try a
- Wi-Fi /etc/config/wireless @docs:guide-user:network:wifi
- ====== Wi-Fi /etc/config/wireless ====== The UCI wireless configuration is located in ''/etc/config/wireless''. Note that if the device has Ethernet ports, wireless is turned **off** by default and using LuCI -> Netw
- Setting up usteer and band-steering @docs:guide-user:network:wifi
- d add the following config-lines in ''/etc/config/wireless'' to each of your SSIDs: option bss_tran
- Setting up DAWN and band-steering @docs:guide-user:network:wifi
- steering ====== [[https://github.com/berlin-open-wireless-lab/DAWN|DAWN]] is a "Decentralized Wifi Controll... d add the following config-lines in ''/etc/config/wireless'' to each of your SSIDs: option bss_tran... s is not the case: https://github.com/berlin-open-wireless-lab/DAWN/blob/e036905ae3a5d079f899bbe46461fc78b45
- Wifi Roaming @docs:guide-user:network:wifi
- needs to scan all frequencies. * **802.11v** ("Wireless Network Management") this standard includes "Netw... sition ===== When joining ("associating with") a wireless network with security enabled, a "4 way handshake" occurs between a wireless client and the BSS (usually a typical radio on an... re using the Luci web interface, go to ''Network->Wireless'', and on each ''SSID'' click ''Edit'', scroll-do
- Network configuration /etc/config/network
- h0 || br-lan (bridge config) |||||| | Switch / Wireless | VLANs and wireless SSIDs | VLAN 2 (eth0.2) || VLAN 1 (eth0.1) |||| OpenWrt | OpenWrt | | Switch / Wireless | Internal jack labels and radio labels | WAN (I... . The ''network'' service manages both wired and wireless networking with [[docs:guide-developer:netifid]]
- Guest Wi-Fi using LuCI @docs:guide-user:network:wifi:guestwifi
- sing LuCI ====== Guest Wi-Fi refers to a separate wireless network that provides Internet access for guests ... ays up and running regardless of the state of the wireless interface(s) and it’s a must to avoid problems wi... that the guest interface is up.\\ ===== 2. Wireless ===== Go to Network->Wireless\\ {{:media:doc:recipes:add_wifi.png|}} Click the "Add" button to the right
- SQM (Smart Queue Management) @docs:guide-user:network:traffic-shaping
- s:guide-user:network:wifi:wifiextenders:bridgedap|wireless AP]], test your upstream router separately. If your wireless AP wifi driver supports AQL limits (e.g. [[:docs:
- Wi-Fi Extender/Repeater with Bridged AP over Ethernet @docs:guide-user:network:wifi:wifiextenders
- on an existing network. This bridges the LAN with wireless device(s) in Access Point mode. The advantage of ... LAN and vice versa works without further changes. Wireless clients connecting to the AP will get an IP addre... [[docs:guide-user:network:wifi:basic|/etc/config/wireless]] ==== Step 1: Change the LAN interface ==== Ed... intenance. ==== Step 2: Configure and enable the wireless network ==== In ''/etc/config/wireless'', locate
- Tunneling interface protocols
- rt '5410' </code> ==== Relay between LAN and Wireless Station ==== This example sets up a ''relayd'' pseudo bridge between a wireless client network and LAN, so that it works similarly to the Broadcom Bridged Client mode. Wireless configuration (excerpt): <code bash> config wifi... option mode 'sta' option ssid 'Some Wireless Network' option encryption 'psk2' option key '1
- Wi-Fi Extender/Repeater with WDS @docs:guide-user:network:wifi:wifiextenders
- ter with WDS ====== This network setup features a wireless access point and a wireless repeater. The access point connects to the main network via a wired connection ... d provides internet access. The repeater connects wirelessly to the access point as a client device, creatin... to any devices connected to the repeater, whether wireless or wired. This configuration is ideal for extendi
- USB mode switch @docs:guide-user:network:wan:wwan
- 10 ProdID=5020 Rev= 0.00 S: Manufacturer=Novatel Wireless, Inc. ... </code> First, find out your device ad... 10 ProdID=7001 Rev= 0.00 S: Manufacturer=Novatel Wireless, Inc. S: Product=Qualcomm Configuration ... I:*