This translation is older than the original page and might be outdated. See what has changed.

ZyXEL VMG3312-B10B DSL-491HNU-B1B v2

ADSL2 / VDSL2 Modem yönlendirici tabanlı Broadcom BCM63168D0 yongası. VMG3312-B10A, VMG3312-B10A-TK, VMG4380-B10A ve VMG8324-B10A'ya benzer.

DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported.
See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details.

Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details.

Sürüm / Model Piyasaya Çıkış Tarihi S/N Desteklenen OpenWrt Sürümü Modele Özel Notlar

HENÜZ DESTEKLENMİYOR

Açık Kaynak Kodu: https://osdn.net/projects/zyxel-vmg3312/ . ZyXEL tarafından dağıtılmaktadır: https://www.zyxel.com/form/gpl_oss_software_notice.shtml .

SoC Ram Flaş Bellek USB Seri JTag
Broadcom BCM63168 64MB 128MB NAND evet evet hayır

Temel yapılandırma Yanıp söndükten sonra, devam edin.
İnternet bağlantınızı kurun, kablosuz yapılandırın, USB bağlantı noktasını yapılandırın, vb..

Mimari MIPS
Satıcı Broadcom
Model Adı / No ZyXEL VMG3312-B10B
Önyükleyici BCM963268 (32bit,SP,BE) için CFE sürüm 1.0.38-112.118
Anakart No 963168VX
Çip-Üstündeki-Sistem(SoC) Broadcom BCM63168D0 xDSL Tümleşik Erişim Cihazı SoC http://www.broadcom.com/products/broadband/xdsl/bcm63168
İşlemci / Hız Broadcom MIPS 4350 V8.0 32-bit (SoC) / 400 MHz Çift Çekirdek
Flaş-Çipi Macronix MXIC MX30LF1G08AA 1G-bit (128 M x 8 bit) NAND Flaş Hafıza http://www.macronix.com/Lists/Datasheet/Attachments/6851/MX30LF1G08AA,%203V,%201Gb,%20v1.5.pdf
Flaş-Boyutu 128MB
RAM-Çipi Winbond W9751G6KB-25 (8M x 4 Banks x 16 bit DDR2 SDRAM) https://www.winbond.com/resource-files/da00-w9751g6kbg1.pdf
RAM-Boyutu 64MB
VDSL2 Hat Sürücüsü
ATM/PTM Broadcom BCM3168D0 ATM/PTM Ağ Cihazı v0.4 (SoC Tümleşik )
Kablolu Broadcom BCM63168D0 Kablolu Ağ cihazı v0.1 (SoC Tümleşik )
Kablosuz Broadcom BCM435f 802.11 Kablosuz Denetleyicisi (SoC Tümleşik )
USB 1x USB (Broadcom BCM3168D0 USB Ağ Cihazı v0.4) (SoC Tümleşik )
Modem Dönüştürücü MNC G4804DG Dual Port Gigabit Ethernet Transformer
LAN-Dönüştürücü Magcom LT2004D 10/100 Dual Port Transformer module http://www.magcom.com.tw/upfile/download/2012-04-26-10-23-14KiBDl0IHgxHJ.pdf
Seri Bağlantısı Evet (4-Pin)
JTAG hayır
Anten Dahili (2x)
Güç 12V 1A

port.serial seri port, seri port kablosu, vb. hakkında genel bilgi.

Seri port için USB to TTL Ch340G Dönüştürücüsü kullanabilirsiniz...

Pin Çıkışı: [(1)3V3–(2)RXD–(3)TXD–(4)boş–(5)GND ]

Seri bağlantı ayarları
ZyXEL VMG3312-B10B
115200

OEM Önyükleme Günlüğü

CPUI L1CI HELO CPUI L1CI DRAM ---- PHYS STRF 400H PHYE DDR2 NREF SIZ4 SIZ3 SIZ2 SIZ1 DINT USYN LSYN MFAS LMBE RACE PASS ---- ZBSS CODE DATA L12F MAIN CFE version 1.0.38-112.118 for BCM963268 (32bit,SP,BE) Build Date: 11/19/2013 (hill@ShangHaoBu) Copyright (C) 2000-2011 Broadcom Corporation. NAND flash device: name MXIC MX30LF1G08AA, id 0xc2f1 block 128KB size 131072KB Chip ID: BCM63168D0, MIPS: 400MHz, DDR: 400MHz, Bus: 200MHz Main Thread: TP0 Memory Test Passed Total Memory: 67108864 bytes (64MB) Boot Address: 0xb8000000 Checking Reset button on EXT INTR 0 Board IP address : 192.168.1.1:ffffff00 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Boot image (0=latest, 1=previous) : 0 Board Id (0-14) : 963168VX Number of MAC Addresses (1-32) : 20 Base MAC Address : 11:77:ff:ee:66:99 PSI Size (1-128) KBytes : 128 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 0 Main Thread Number [0|1] : 0 *** Press any key to stop auto run (1 seconds) *** Auto run second count down: 0 Wait for Multiboot Service Packet… 0 Booting from latest image (0xb8040000) ... Code Address: 0x80020000, Entry Address: 0x80343ef0 Decompression OK! Entry at 0x80343ef0 Closing network. Disabling Switch ports. Flushing Receive Buffers... 70 buffers found. Closing DMA Channels. Starting program at 0x80343ef0 Linux version 2.6.30 (hill@ShangHaoBu) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #1 SMP PREEMPT Thu Sep 29 14:15:01 CST 2016 NAND ECC Hamming, page size 0x800 bytes, spare size used 64 bytes NAND flash device: name MXIC MX30LF1G08AA, id 0xc2f1 block 128KB size 131072KB reading nvram into inMemNvramData ulPsiSize 0x80 backupPsi 0x0 ulSyslogSize 0x0 VendorName ZyXEL Technology Corp. ProductName VMG3312-B10B Bootbase Version : V1.01.00 | 11/19/2013 13:40:58 963168VX prom init CPU revision is: 0002a080 (Broadcom4350) DSL SDRAM reserved: 0x132000 Determined physical RAM map: memory: 03ece000 @ 00000000 (usable) Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00003ece Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00003ece On node 0 totalpages: 16078 free_area_init_node: node 0, pgdat 804162e0, node_mem_map 81000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 94 pages used for memmap Normal zone: 11888 pages, LIFO batch:1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 15952 Kernel command line: root=mtd:rootfs ro rootfstype=jffs2 console=ttyS0,115200 wait instruction: enabled Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes NR_IRQS:128 PID hash table entries: 256 (order: 8, 1024 bytes) console [ttyS0] enabled Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 58592k/64312k available (3248k kernel code, 5700k reserved, 825k data, 156k init, 0k highmem) Calibrating delay loop... 399.36 BogoMIPS (lpj=199680) Mount-cache hash table entries: 512 --Kernel Config-- SMP=1 PREEMPT=1 DEBUG_SPINLOCK=0 DEBUG_MUTEXES=0 Broadcom Logger v0.1 Sep 29 2016 14:13:08 CPU revision is: 0002a080 (Broadcom4350) Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes Calibrating delay loop... 402.43 BogoMIPS (lpj=201216) Brought up 2 CPUs net_namespace: 1144 bytes NET: Registered protocol family 16 flash partition table boot offset=0x00000000, size=0x00020000 rootfs1 offset=0x00020000, size=0x028e0000 rootfs2 offset=0x02900000, size=0x028e0000 data offset=0x051e0000, size=0x00400000 fw offset=0x055e0000, size=0x02920000 bbt offset=0x00000000, size=0x00000000 FLASH_BASE =0xb8000000 fInfo->flash_rootfs_start_offset =0x00020000 fInfo->flash_meta_start_blk = 655 fInfo->flash_syslog_start_blk = 0 fInfo->flash_syslog_number_blk = 0 fInfo->flash_syslog_length=0x0 fInfo->flash_backup_psi_start_blk = 0 fInfo->flash_backup_psi_number_blk = 1 sp startAddr = bd180000 fInfo->flash_scratch_pad_start_blk = 652 fInfo->flash_scratch_pad_number_blk = 1 fInfo->flash_scratch_pad_length = 0x20000 fInfo->flash_scratch_pad_blk_offset = 0x0 psi startAddr = bd1a0000 fInfo->flash_persistent_start_blk = 653 fInfo->flash_persistent_number_blk = 1 fInfo->flash_persistent_length=0x20000 fInfo->flash_persistent_blk_offset = 0x51a0000 fInfo->flash_fwupgrade_start_blk = 687 fInfo->flash_rootfs2_start_offset = 0x2900000 Internal 1P2 VREG will be shutdown if unused...Unused, turn it off (000090cb-000090d6=-11<300) registering PCI controller with io_map_base unset registering PCI controller with io_map_base unset bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pci 0000:00:00.0: reg 10 32bit mmio: [0x10004000-0x10013fff] pci 0000:00:00.0: reg 30 32bit mmio: [0x000000-0x0007ff] pci 0000:00:00.0: supports D1 D2 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:09.0: reg 10 32bit mmio: [0x10002600-0x100026ff] pci 0000:00:0a.0: reg 10 32bit mmio: [0x10002500-0x100025ff] pci 0000:01:00.0: PME# supported from D0 D3hot pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: disabled pci 0000:01:00.0: MEM window: disabled pci 0000:01:00.0: PREFETCH window: disabled PCI: Setting latency timer of device 0000:01:00.0 to 64 BLOG v3.0 Initialized BLOG Rule v1.0 Initialized Broadcom IQoS v0.1 Sep 29 2016 14:14:50 initialized Broadcom GBPM v0.1 Sep 29 2016 14:14:50 initialized NET: Registered protocol family 8 NET: Registered protocol family 20 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NET: Registered protocol family 1 JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.11) msgmni has been set to 114 io scheduler noop registered (default) PCI: Setting latency timer of device 0000:01:00.0 to 64 Attempt to register valid tty line number (0). Attempt to register valid tty line number (1). Attempt to register valid tty line number (2). Attempt to register valid tty line number (3). Attempt to register valid tty line number (4). Attempt to register valid tty line number (5). Attempt to register valid tty line number (6). Attempt to register valid tty line number (7). Attempt to register valid tty line number (8). Attempt to register valid tty line number (9). Attempt to register valid tty line number (10). Attempt to register valid tty line number (11). Attempt to register valid tty line number (12). Attempt to register valid tty line number (13). Attempt to register valid tty line number (14). Attempt to register valid tty line number (15). Attempt to register valid tty line number (0). Attempt to register valid tty line number (1). Attempt to register valid tty line number (2). Attempt to register valid tty line number (3). Attempt to register valid tty line number (4). Attempt to register valid tty line number (5). Attempt to register valid tty line number (6). Attempt to register valid tty line number (7). Attempt to register valid tty line number (8). Attempt to register valid tty line number (9). Attempt to register valid tty line number (10). Attempt to register valid tty line number (11). Attempt to register valid tty line number (12). Attempt to register valid tty line number (13). Attempt to register valid tty line number (14). Attempt to register valid tty line number (15). Driver 'sd' needs updating - please use bus_type methods PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 Broadcom DSL NAND controller (BrcmNand Controller) -->brcmnand_scan: CS=0, numchips=1, csi=0 mtd->oobsize=0, mtd->eccOobSize=0 NAND_CS_NAND_XOR=00000000 Disabling XOR on CS#0 brcmnand_scan: Calling brcmnand_probe for CS=0 B4: NandSelect=40000001, nandConfig=15142200, chipSelect=0 brcmnand_read_id: CS0: dev_id=c2f1801d After: NandSelect=40000001, nandConfig=15142200 DevId c2f1801d may not be supported. Will use config info Spare Area Size = 16B/512B Block size=00020000, erase shift=17 NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11 busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff timing1 not adjusted: 6574845b timing2 not adjusted: 00001e96 brcmnand_adjust_acccontrol: gAccControl[CS=0]=00000000, ACC=f7ff1010 ECC level changed to 15 OOB size changed to 16 BrcmNAND mfg 0 0 UNSUPPORTED NAND CHIP 128MB on CS0 Found NAND on CS0: ACC=f7ff1010, cfg=15142200, flashId=c2f1801d, tim1=6574845b, tim2=00001e96 BrcmNAND version = 0x0400 128MB @00000000 brcmnand_scan: Done brcmnand_probe brcmnand_scan: B4 nand_select = 40000001 brcmnand_scan: After nand_select = 40000001 100 CS=0, chip->ctrl->CS[0]=0 ECC level 15, threshold at 1 bits reqEccLevel=0, eccLevel=15 190 eccLevel=15, chip->ecclevel=15, acc=f7ff1010 brcmnand_scan 10 200 CS=0, chip->ctrl->CS[0]=0 200 chip->ecclevel=15, acc=f7ff1010 page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17 brcmnand_scan 220 Brcm NAND controller version = 4.0 NAND flash size 128MB @18000000 brcmnand_scan 230 brcmnand_scan 40, mtd->oobsize=64, chip->ecclayout=00000000 brcmnand_scan 42, mtd->oobsize=64, chip->ecclevel=15, isMLC=0, chip->cellinfo=0 ECC layout=brcmnand_oob_bch4_4k brcmnand_scan: mtd->oobsize=64 brcmnand_scan: oobavail=50, eccsize=512, writesize=2048 brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3 300 CS=0, chip->ctrl->CS[0]=0 500 chip=83a2e190, CS=0, chip->ctrl->CS[0]=0 -->brcmnand_default_bbt brcmnand_default_bbt: bbt_td = bbt_main_descr Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0 Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0 File system address: 0xb8040000 nand_read_bbt: Bad block at 0x05cc0000 nand_read_bbt: Bad block at 0x05ea0000 rescanning .... Found bad block at offset 5cc0000, in BBT Found bad block at offset 5ea0000, in BBT ----- Contents of BBT ----- Bad block at 5cc0000 Bad block at 5ea0000 ----- END Contents of BBT ----- brcmnandCET: Status -> Deferred brcmnand_scan 99 Root file system size 28e0000 bad block number = 0 Creating 4 MTD partitions on "brcmnand.0": 0x000000040000-0x000001120000 : "rootfs" 0x0000051e0000-0x0000055e0000 : "data" 0x000000000000-0x000000020000 : "nvram" 0x0000055e0000-0x000007f00000 : "fw" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:00:0a.0 to 64 ehci_hcd 0000:00:0a.0: EHCI Host Controller ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM ehci_hcd 0000:00:0a.0: irq 18, io mem 0x10002500 ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Enabling device 0000:00:09.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:00:09.0 to 64 ohci_hcd 0000:00:09.0: OHCI Host Controller ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:09.0: irq 17, io mem 0x10002600 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Watchdog Timer Init -- kthread brcmboard: brcm_board_init entry SES: Button Interrupt 0x2 is enabled SES: LED GPIO 0x10 is enabled PCIe: No device found - Powering down Serial: BCM63XX driver $Revision: 3.00 $ Magic SysRq enabled (type ^ h for list of supported commands) ttyS0 at MMIO 0xb0000180 (irq = 13) is a BCM63XX Attempt to register valid tty line number (0). ttyS1 at MMIO 0xb00001a0 (irq = 42) is a BCM63XX Attempt to register valid tty line number (1). bcmPktDma_init: Broadcom Packet DMA Library initialized Total # RxBds=1448 bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized bcmxtmrt: Broadcom BCM3168D0 ATM/PTM Network Device v0.4 Sep 29 2016 14:14:37 GACT probability NOT on Mirror/redirect action on u32 classifier input device check on Actions configured GRE over IPv4 tunneling driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Initializing MCPD Module Ebtables v2.0 registered ebt_time registered ebt_dhcpopt registered ebt_ftos registered ebt_wmm_mark registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (jffs2 filesystem) readonly on device 31:0. Freeing unused kernel memory: 156k freed jffs2_scan_dirent_node(): Name CRC failed on node at 0x0034e7d8: Read 0x695f5817, calculated 0xec6edb2a Empty flash at 0x0034e80c ends at 0x0034f000 Empty flash at 0x00356c58 ends at 0x00357000 cp: can't stat '/etc/ppp/chat/*': No such file or directory mkdir: can't create directory '/var/etc': File exists JFFS2 notice: (233) check_node_data: wrong data CRC in data node at 0x000e0000: read 0x833387ad, calculated 0xf953417d. Loading drivers and kernel modules... chipinfo: module license 'proprietary' taints kernel. Disabling lock debugging due to kernel taint brcmchipinfo: brcm_chipinfo_init entry Broadcom Ingress QoS Module Char Driver v0.1 Sep 29 2016 14:13:33 Registered<243> Broadcom Ingress QoS ver 0.1 initialized BPM: tot_mem_size=67108864B (64MB), buf_mem_size=10066320B (9MB), num of buffers=4766, buf size=2112 Broadcom BPM Module Char Driver v0.1 Sep 29 2016 14:13:28 Registered<244> [NTC bpm] bpm_set_status: BPM status : enabled NBUFF v1.0 Initialized Initialized fcache state Broadcom Packet Flow Cache Char Driver v2.2 Sep 29 2016 14:13:33 Registered<242> Created Proc FS /procfs/fcache Broadcom Packet Flow Cache registered with netdev chain Broadcom Packet Flow Cache learning via BLOG enabled. Constructed Broadcom Packet Flow Cache v2.2 Sep 29 2016 14:13:33 chipId 0x631680D0 Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Sep 29 2016 14:13:29 Registered <241> FAP Debug values at 0x00000010 0x00000010 Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000 FAP Soft Reset Done 4ke Reset Done Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000 FAP Soft Reset Done 4ke Reset Done FAP Debug values at 0xa2b5b290 0xa2b9b290 Allocated FAP0 GSO Buffers (0xA2B61548) : 1048576 bytes @ 0xA2400000 Allocated FAP1 GSO Buffers (0xA2BA1548) : 1048576 bytes @ 0xA2500000 Allocated FAP0 TM SDRAM Queue Storage (a2b6154c) : 219456 bytes @ a2bc0000 Allocated FAP1 TM SDRAM Queue Storage (a2ba154c) : 219456 bytes @ a2600000 [NTC fapProto] fapReset : Reset FAP Protocol layer fapDrv_construct: FAP0: pManagedMemory=b0820710. wastage 8 bytes fapDrv_construct: FAP1: pManagedMemory=b0a20710. wastage 8 bytes bcmPktDma_bind: FAP Driver binding successfull [FAP0] GSO Buffer set to 0xA2400000 [FAP1] GSO Buffer set to 0xA2500000 [FAP0] FAP BPM Initialized. [FAP1] FAP BPM Initialized. [FAP0] FAP TM: ON [FAP1] FAP TM: ON bcmxtmcfg: bcmxtmcfg_init entry adsl: adsl_init entry Broadcom BCM63168D0 Ethernet Network Device v0.1 Sep 29 2016 14:14:32 Broadcom GMAC Char Driver v0.1 Sep 29 2016 14:14:35 Registered<249> Broadcom GMAC Driver v0.1 Sep 29 2016 14:14:35 Initialized fapDrv_psmAlloc: fapIdx=1, size: 4000, offset=b0a20710 bytes remaining 7000 ETH Init: Ch:0 - 200 tx BDs at 0xb0a20710 bcmPktDma_EthInitTxChan_Dqm LINE 97 bcmPktDma_EthInitTxChan_Dqm LINE 109 bcmPktDma_EthInitTxChan_Dqm LINE 117 bcmPktDma_EthInitTxChan_Dqm LINE 120 bcmPktDma_EthInitTxChan_Dqm LINE 122 fapDrv_psmAlloc: fapIdx=0, size: 4000, offset=b0820710 bytes remaining 7000 ETH Init: Ch:1 - 200 tx BDs at 0xb0820710 bcmPktDma_EthInitTxChan_Dqm LINE 97 bcmPktDma_EthInitTxChan_Dqm LINE 109 bcmPktDma_EthInitTxChan_Dqm LINE 117 bcmPktDma_EthInitTxChan_Dqm LINE 120 bcmPktDma_EthInitTxChan_Dqm LINE 122 fapDrv_psmAlloc: wastage 8 bytes fapDrv_psmAlloc: fapIdx=0, size: 4808, offset=b08216b0 bytes remaining 2184 ETH Init: Ch:0 - 600 rx BDs at 0xb08216b0 fapDrv_psmAlloc: wastage 8 bytes fapDrv_psmAlloc: fapIdx=1, size: 4808, offset=b0a216b0 bytes remaining 2184 ETH Init: Ch:1 - 600 rx BDs at 0xb0a216b0 dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered eth1: MAC Address: 11:77:ff:ee:66:99 eth2: MAC Address: 11:77:ff:ee:66:99 eth3: MAC Address: 11:77:ff:ee:66:99 eth4: MAC Address: 11:77:ff:ee:66:99 eth0: MAC Address: 11:77:ff:ee:66:99 Broadcom BCM3168D0 USB Network Device v0.4a Sep 29 2016 14:13:39 usb0: MAC Address: 10 7B EF ED 66 91 usb0: Host MAC Address: 10 7B EF ED 66 92 hub 1-0:1.0: over-current change on port 2 USBD Initialization done status 0 USB Link DOWN. message received before monitor task is initialized kerSysSendtoMonitorTask eth2 Link UP 100 mbps full duplex message received before monitor task is initialized kerSysSendtoMonitorTask --SMP support wl: dsl_tx_pkt_flush_len=338 wl: high_wmark_tot=3097 PCI: Setting latency timer of device 0000:00:00.0 to 64 wl: passivemode=1 wl: napimode=0 wl0: allocskbmode=1 currallocskbsz=256 otp_read_pci: bad crc Neither SPROM nor OTP has valid image wl:srom/otp not programmed, using main memory mapped srom info(wombo board) wl:loading /etc/wlan/bcm6362_vars.bin Failed to open srom image from '/etc/wlan/bcm6362_vars.bin'. wl:loading /etc/wlan/bcm6362_map.bin wl0: Broadcom BCM435f 802.11 Wireless Controller 5.100.138.2008.cpe4.12L06B.4 dgasp: kerSysRegisterDyingGaspHandler: wl0 registered p8021ag: p8021ag_init entry Broadcom 802.1Q VLAN Interface, v0.1 [1]+ Done(1) test -e /bin/mm.exe && /bin/mm.exe [1]+ Done(1) test -e /bin/icf.exe && /bin/icf.exe ===== Release Version 4.12L.06B (build timestamp 160929_1415) ===== Tue Mar 26 17:25:53 UTC 2019 ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3840 buckets, 15360 max) xt_time: kernel timezone is -0000 nf_ct_rtsp: registering helper for port 554 nf_nat_rtsp: init success ip6_tables: (C) 2000-2006 Netfilter Core Team iptables: No chain/target/match by that name iptables: No chain/target/match by that name Sntp: Using new rule EET-2EEST,M3.4.0/3:0,M10.4.0/4:0 =======Make Sure IPv6 netfilter kernel module is inserted. ssk:error:35.910:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server ssk:error:36.502:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server ssk:error:36.601:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server save /log/brcm.log to flash Created new Tag Rule: dev=eth0, dir=0, tags=0, id=0 Created new Tag Rule: dev=eth0, dir=0, tags=1, id=0 Created new Tag Rule: dev=eth0, dir=0, tags=2, id=0 Created new Tag Rule: dev=eth0, dir=1, tags=0, id=0 Created new Tag Rule: dev=eth0, dir=1, tags=1, id=0 Created new Tag Rule: dev=eth0, dir=1, tags=2, id=0 RTNETLINK answers: No such process iptables: No chain/target/match by that name iptables: No chain/target/match by that name iptables: No chain/target/match by that name Created new Tag Rule: dev=eth1, dir=0, tags=0, id=0 Created new Tag Rule: dev=eth1, dir=0, tags=1, id=0 Created new Tag Rule: dev=eth1, dir=0, tags=2, id=0 Created new Tag Rule: dev=eth1, dir=1, tags=0, id=0 Created new Tag Rule: dev=eth1, dir=1, tags=1, id=0 Created new Tag Rule: dev=eth1, dir=1, tags=2, id=0 RTNETLINK answers: No such process Send alert by mail, but mail server is not set! Send log capacity full alarm by mail.. Send alert by mail, but mail server is not set! Send log capacity full alarm by mail Created new Tag Rule: dev=eth2, dir=0, tags=0, id=0 Created new Tag Rule: dev=eth2, dir=0, tags=1, id=0 Created new Tag Rule: dev=eth2, dir=0, tags=2, id=0 Created new Tag Rule: dev=eth2, dir=1, tags=0, id=0 Created new Tag Rule: dev=eth2, dir=1, tags=1, id=0 Created new Tag Rule: dev=eth2, dir=1, tags=2, id=0 RTNETLINK answers: No such process Created new Tag Rule: dev=eth3, dir=0, tags=0, id=0 Created new Tag Rule: dev=eth3, dir=0, tags=1, id=0 Created new Tag Rule: dev=eth3, dir=0, tags=2, id=0 Created new Tag Rule: dev=eth3, dir=1, tags=0, id=0 Created new Tag Rule: dev=eth3, dir=1, tags=1, id=0 Created new Tag Rule: dev=eth3, dir=1, tags=2, id=0 RTNETLINK answers: No such process WLmngr Daemon is running optarg=0 shmId=0 RTNETLINK answers: No such process wlevt is ready for new msg... parameter method not supported ssk:error:48.826:mdm_activateObjects:947:rcl handler reports error=9000 on WPS {1,2} parameter method not supported ssk:error:48.870:mdm_activateObjects:947:rcl handler reports error=9000 on WPS {1,3} parameter method not supported ssk:error:48.914:mdm_activateObjects:947:rcl handler reports error=9000 on WPS {1,4} =======Make Sure IPv6 netfilter kernel module is inserted. ip6tables: Chain already exists ip6tables: Chain already exists ssk:error:49.324:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server ssk:error:49.409:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server =======Make Sure IPv6 netfilter kernel module is inserted. ip6tables: Chain already exists ip6tables: Chain already exists ssk:error:49.919:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server ssk:error:49.963:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server ssk:error:52.045:rcl_wanPppConnObject:1608:Can't setting Unsafe String. ssk:error:52.045:mdm_activateObjects:947:rcl handler reports error=9003 on WANPPPConnection {2,1,1} ssk:error:52.511:rcl_wanPppConnObject:1608:Can't setting Unsafe String. ssk:error:52.512:mdm_activateObjects:947:rcl handler reports error=9003 on WANPPPConnection {3,1,1} Line 0: xDSL G.994 training ssk:error:53.486:rcl_wanPppConnObject:1608:Can't setting Unsafe String. ssk:error:53.487:mdm_activateObjects:947:rcl handler reports error=9003 on WANPPPConnection {7,1,1} killall: tcpdump: no process killed ssk:error:53.710:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server WLMNGR-DAEMON:error:53.761:dumpLockInfo:64:locked=[1] lockOwner=[302], func=[cmsMdm_init] WLMNGR-DAEMON:error:53.761:dumpLockInfo:70:held for 27539ms by function cmsMdm_init ssk:error:59.773:rcl_secDmzHostCfgObject:994:Failed to get info. ssk:error:59.777:rcl_secDmzHostCfgObject:996:rut_getWANIP failed to get info again. Line 0: VDSL G.993 started ssk:error:61.278:rcl_secDmzHostCfgObject:994:Failed to get info. ssk:error:61.281:rcl_secDmzHostCfgObject:996:rut_getWANIP failed to get info again. iptables: Chain already exists iptables: No chain/target/match by that name There is no Predefined DevicePin in CFE WPS Device PIN = 90800566 Could not get lock! RTNETLINK answers: No such process RTNETLINK answers: No such process ssk:error:64.805:processFR:4115:FRCount Entered watchdog: invalid option -- m ssk:error:65.709:rutLan_createDnsmasqCfg:3045:WAN_REDIRECT_STATUS_FILE or SECURITY_STATUS_FILE exist Enter user spaceeth2 Link DOWN. ssk:error:66.565:updateHomeplugStatus:1309:homeplug connect error Starting celld daemon...... Faifa for HomePlug AV wlWriteIntfCfg@2943 All security mode. Setting SSID: "TTNET_ZyXEL_MHF4" Setting SSID: "TTNET WiFi Fon" Setting SSID: "TTNET_FON_CLOSED" Setting SSID: "TTNET_ZyXEL" [wlmngr_doBasic][3372]m_instance_wl[idx].m_wlVar.wlNBw=[40] wlctl: Unsupported RTNETLINK answers: No such process eth2 Link UP 100 mbps full duplex RTNETLINK answers: No such process acsd: selected channel spec: 0x2b0a OFF wlWriteIntfCfg@2943 All security mode. cat: can't open '/var/wl0_assoc_after': No such file or directory Line 0: VDSL2 link up, Bearer 0, us=3072, ds=24576 (ssk) xDSL link up, Connection Type: PTM Powered down Created new Tag Rule: dev=ptm0, dir=1, tags=0, id=0 Created new Tag Rule: dev=ptm0, dir=1, tags=1, id=0 Created new Tag Rule: dev=ptm0, dir=1, tags=1, id=1 Created new Tag Rule: dev=ptm0, dir=1, tags=2, id=0 Created new Tag Rule: dev=ptm0, dir=0, tags=1, id=0 Created new Tag Rule: dev=ptm0, dir=0, tags=2, id=0 Created new Tag Rule: dev=ptm0, dir=1, tags=0, id=1 Created new Tag Rule: dev=ptm0, dir=1, tags=1, id=2 Created new Tag Rule: dev=ptm0, dir=1, tags=1, id=3 Created new Tag Rule: dev=ptm0, dir=1, tags=2, id=1 Created new Tag Rule: dev=ptm0, dir=0, tags=1, id=1 Created new Tag Rule: dev=ptm0, dir=0, tags=2, id=1 PPP: ppp1.1 Start to connect ... httpd:error:82.792:web_main:4016:rut_sendMsgToSmd is failed. httpd_ssl:error:83.898:web_main:4016:rut_sendMsgToSmd is failed. celld.c-scheduler_loop()-5652:DEFAULT head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory cat: can't open '/var/wwan/wwan_dev:::/dev_driver': No such file or directory head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory head: /tmp/usb-get-ids.out: No such file or directory mwan: Mobile WAN adapter detected: Linux 2.6.30 ohci_hcd Linux 2.6.30 ehci_hcd OHCI Host Controller EHCI Host Controller (:) Skip saving ppp session info ppp1.1(346e9d917b1f/000a) PPP: ppp1.1 Connection Up. ssk:error:102.371:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server ssk:error:102.443:rutLan_createDnsmasqCfg:3045:WAN_REDIRECT_STATUS_FILE or SECURITY_STATUS_FILE exist ssk:error:102.601:rutNtwk_getActiveDns6Ip:694:fail to get dns6 server ssk:error:102.669:rutLan_createDnsmasqCfg:3045:WAN_REDIRECT_STATUS_FILE or SECURITY_STATUS_FILE exist rm: can't remove '/var/rtl': No such file or directory Send alert by mail, but mail server is not set! Send log capacity full alarm by mail ssk:error:106.675:rutLan_createDnsmasqCfg:3045:WAN_REDIRECT_STATUS_FILE or SECURITY_STATUS_FILE exist exceed max 8 WANs tr69c:error:107.159:updateTr69cCfgInfo:951:could not build full path to 88.246.65.163 General UPnP daemon is ready to run with NATT 1 ssk:error:108.029:rutIpt_softGreRules:5447:ifName=ppp1.1 add=1 comfirmAdd=1,comfirmDel=0 ssk:error:108.215:cmsLck_acquireLockTraced:82:already have lock! callerFuncName rutGre_setEbtablesRule ssk:error:108.215:dumpLockInfo:2488:locked=1 lockOwner=302 ssk:error:108.216:dumpLockInfo:2494:held for 284ms by function rutIPSec_doRestartRacoon ssk:error:108.276:rutGre_DelDSCPMark:1207:ifname =wl0.1, rulename = gretap0.1 iptables: No chain/target/match by that name ssk:error:108.967:cmsLck_acquireLockTraced:82:already have lock! callerFuncName rutGre_setEbtablesRule ssk:error:108.968:dumpLockInfo:2488:locked=1 lockOwner=302 ssk:error:108.968:dumpLockInfo:2494:held for 1036ms by function rutIPSec_doRestartRacoon ssk:error:109.039:rutGre_DelDSCPMark:1207:ifname =wl0.2, rulename = gretap0.2 iptables: No chain/target/match by that name killall: GreKeepAlive: no process killed All services associated with ppp1.1 is activated. Sntp: Using new rule EET-2EEST,M3.4.0/3:0,M10.4.0/4:0 ssk:error:109.815:processPppStateChanged:2569:connect up ppp1.1, setRedirectIptables false celld.c-scheduler_loop()-5652:DEFAULT exceed max 8 WANs 200 OK, File Get Success Send alert by mail, but mail server is not set! Send log capacity full alarm by mail Send alert by mail, but mail server is not set! Send log capacity full alarm by mail save /log/system.log to flash


This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2019/04/28 11:38
  • by tmomas