This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyut LisansBakıcıHata raporuKaynak kod
firmwaream33x-cm320130304-1libcTI AM335x PM firmware

7kB6kBImre KalozBug reportsSources
firmwareamd64-microcode20230804-1libcAMD64 CPU microcode

36kB35kBFelix FietkauBug reportsSources
firmwarear3k-firmware20230804-1libcath3k firmware

939kB938kBFelix FietkauBug reportsSources
firmwareath6k-firmware20230804-1libcAR600X firmware

696kB695kBFelix FietkauBug reportsSources
firmwareath9k-htc-firmware20230804-1libcAR9271/AR7010 firmware

60kB60kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca99x0-ct-htt2020-11-08-1libc, ath10k-board-qca99x0Alternative ath10k firmware for QCA99x0 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

385kB387kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca99x0-ct2020-11-08-1libc, ath10k-board-qca99x0Alternative ath10k firmware for QCA99x0 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 99×0 firmware, so select only
one.

423kB425kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca99x020230804-1libc, librt, libpthread, ath10k-board-qca99x0ath10k qca99x0 firmware

363kB364kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca988x-ct-htt2018-05-12-952afa49-1libc, kmod-ath10k-ctAlternative ath10k firmware for QCA988X from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and fixes .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware selects and requires the ath10k-ct driver.

181kB180kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca988x-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca988xAlternative ath10k firmware for QCA988X from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware will NOT be used unless the standard ath10k-firmware-qca988x
is un-selected since the driver will try to load firmware-5.bin before
firmware-2.bin

178kB177kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca988x20230804-1libc, ath10k-board-qca988xath10k qca988x firmware

214kB213kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca4019-ct-htt2020-11-08-1libcAlternative ath10k firmware for IPQ4019 radio from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features.
See: http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

384kB384kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca4019-ct2020-11-08-1libcAlternative ath10k firmware for IPQ4019 radio from Candela Technologies.
Enables IBSS and other features. Works with standard or ath10k-ct driver.
See: http://www.candelatech.com/ath10k-10.4.php

428kB428kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca401920230804-1libcath10k qca4019 firmware

455kB456kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca617420230804-1libcath10k qca6174 firmware

855kB857kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca9887-ct-htt2018-05-12-952afa49-1libc, kmod-ath10k-ctAlternative ath10k firmware for QCA9887 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and fixes .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware selects and requires the ath10k-ct driver.

187kB186kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca9887-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca9887Alternative ath10k firmware for QCA9887 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware conflicts with the standard 9887 firmware, so select only
one.

184kB183kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca988720230804-1libc, ath10k-board-qca9887ath10k qca9887 firmware

204kB204kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca9888-ct-htt2020-11-08-1libc, ath10k-board-qca9888Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

417kB417kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9888-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca9888Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 9886 and 9888 firmware, so select only
one.

465kB465kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca988820230804-1libc, ath10k-board-qca9888ath10k qca9888 firmware

516kB516kBFelix FietkauBug reportsSources
firmwareath10k-firmware-qca9984-ct-htt2020-11-08-1libc, ath10k-board-qca9984Alternative ath10k firmware for QCA9984 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

396kB398kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9984-ct2020-11-08-1libc, ath10k-board-qca9984Alternative ath10k firmware for QCA9984 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 9984 firmware, so select only
one.

458kB460kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca998420230804-1libc, ath10k-board-qca9984ath10k qca9984 firmware

507kB510kBFelix FietkauBug reportsSources
firmwareb43legacy-firmware3.130.20.0-1libcBroadcom bcm43xx b43legacy firmware

16kB16kBOpenWrt teamBug reportsSources
network---routing-and-redirectionbabel-pinger0.1-1libc, librtBabel-pinger is a hack to export a default route into Babel for people
using DHCP to configure their routers rather than speaking to their
upstream provider with a proper routing protocol.

4kB3kBGabriel KerneisBug reportsSources
utilitiesbanhostlist1-2libcList of domains serving advertising and malicious content to easily block them

1kB0kBMatteo CroceBug reportsSources
network---routing-and-redirectionbcp385-11libcbcp38 implements IETF BCP38 for home routers.
See https://tools.ietf.org/html/bcp38.

This package provides BCP38 for IPv4 only - IPv6 uses source
specific default routes, so no firewall configuration is needed.

3kB2kBToke Høiland-JørgensenBug reportsSources
utilitiesbmx7-dnsupdate0.1-3libc, librt, libpthread, bmx7, bmx7-json, inotifywait, jshnbmx7-dnsupdate

1kB0kBPaul SpoorenBug reportsSources
firmwarebnx2-firmware20230804-1libc, librt, libpthreadBroadcom BCM5706/5708/5709/5716 firmware

103kB102kBFelix FietkauBug reportsSources
boot-loadersbrcm2708-gpu-fw2017-08-08-e7ba7ab135..d5blibcGPU and kernel boot firmware for brcm2708.

0kB0kBLEDE teamBug reportsSources
firmwarebrcmfmac-firmware-4329-sdio20230804-1libcBroadcom BCM4329 FullMac SDIO firmware

173kB172kBFelix FietkauBug reportsSources
firmwarebrcmfmac-firmware-4366b1-pcie20230804-1libcBroadcom 4366b1 FullMAC PCIe firmware

622kB622kBFelix FietkauBug reportsSources
firmwarebrcmfmac-firmware-43362-sdio20201118-3libcBroadcom BCM43362 FullMac SDIO firmware

127kB126kBFelix FietkauBug reportsSources
firmwarebrcmfmac-firmware-43430-sdio20201118-3libcBroadcom BCM43430 FullMac SDIO firmware

255kB254kBFelix FietkauBug reportsSources
firmwarebrcmfmac-firmware-43602a1-pcie20230804-1libcBroadcom 43602a1 FullMAC PCIe firmware

361kB361kBFelix FietkauBug reportsSources
firmwarebrcmfmac-firmware-usb20230804-1libcBroadcom BCM43xx fullmac USB firmware

491kB491kBFelix FietkauBug reportsSources
firmwarebrcmsmac-firmware20230804-1libc, librt, libpthreadBroadcom BCM43xx softmac PCIe firmware

41kB41kBFelix FietkauBug reportsSources
base-systemca-bundle20230311-1libcSystem CA certificates as a bundle

121kB120kBOpenWrt teamBug reportsSources
base-systemca-certificates20230311-1libcSystem CA certificates

131kB130kBOpenWrt teamBug reportsSources
firmwarecarl9170-firmware20230804-1libc, librt, libpthreadAR9170 firmware

10kB9kBFelix FietkauBug reportsSources
utilitiescollectd-mod-apache5.12.0-34libc, collectd, libcurl4apache status input plugin

6kB5kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-apcups5.12.0-34libc, collectdapcups status input plugin

4kB3kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-ascent5.12.0-34libc, collectd, libcurl4, libxml2ascent status input plugin

5kB5kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-bind5.12.0-34libc, collectd, libcurl4, libxml2BIND server/zone input plugin

10kB9kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-chrony5.12.0-34libc, collectdchrony status input plugin

6kB5kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-conntrack5.12.0-34libc, collectdconnection tracking table size input plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-contextswitch5.12.0-34libc, collectdcontext switch input plugin

2kB1kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-cpu5.12.0-34libc, collectdCPU input plugin

4kB4kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
utilitiescollectd-mod-cpufreq5.12.0-34libc, collectdCPU Freq input plugin

3kB2kBJo-Philipp Wich, Hannu Nyman,Bug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun