Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | ↓ Yüklü boyut | Lisans | Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network | natmap | 20230820-1 | libc, librt, libpthread | TCP/UDP port mapping tool for full cone NAT | 16kB | 15kB | MIT | Richard Yu, Ray Wang, | Bug reports | Sources |
| network | tunneldigger | 2021-03-08-4f72b305-1 | libc, kmod-l2tp, kmod-l2tp-ip, kmod-l2tp-eth, libnl-tiny1, libpthread, librt | Tunneldigger is a simple VPN tunneling solution based on the Linux kernel support for L2TPv3 tunnels over UDP. | 16kB | 15kB | AGPL-3.0 | Nick Hainke | Bug reports | Sources |
| network | addrwatch-mysql | 1.0.2-3 | libc, addrwatch, libmariadb3 | packages:pkgdata:addrwatch-mysql, This is a tool similar to arpwatch. It main purpose is to monitor network and log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6 addresses of hosts using IPv6 privacy extensions (RFC4941). This contains the MySQL output module. | 16kB | 15kB | GPL-3.0-or-later | Ondrej Caletka | packages:pkgdata:addrwatch-mysql, Bug reports | packages:pkgdata:addrwatch-mysql, Sources |
| network | batctl-tiny | 2022.0-3 | libc, libnl-tiny1, librt | packages:pkgdata:batctl-tiny, batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2022.0 of the user space utility. Only configuration relevant subcommands are enabled. | 16kB | 15kB | GPL-2.0-only ISC MIT | Simon Wunderlich | packages:pkgdata:batctl-tiny, Bug reports | packages:pkgdata:batctl-tiny, Sources |
| network | golang-torproject-tor-fw-helper-dev | 0.3-2 | libc | packages:pkgdata:golang-torproject-tor-fw-helper-dev, tor-fw-helper is a helper to automatically configuring port forwarding for tor, using UPnP or NAT-PMP NAT traversal. This is a tor-fw-helper rewrite in Go that functions as a drop in replacement for the original C code. This package provides the source files for the helper program. | 16kB | 15kB | BSD-3-Clause | Jeffery To | packages:pkgdata:golang-torproject-tor-fw-helper-dev, Bug reports | packages:pkgdata:golang-torproject-tor-fw-helper-dev, Sources |
| network | gnunet-fs | 0.17.5-4 | libc, gnunet, gnunet-datastore, libextractor | GNUnet file-sharing components | 154kB | 153kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-fs | 0.17.5-4 | libc, gnunet, gnunet-datastore, libextractor | packages:pkgdata:gnunet-fs, GNUnet file-sharing components | 154kB | 153kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-fs, Bug reports | packages:pkgdata:gnunet-fs, Sources |
| network | libcurl4 | 8.4.0-1 | libc, librt, libpthread, libmbedtls12, libnghttp2-14, ca-bundle | A client-side URL transfer library | 155kB | 154kB | MIT | Stan Grishin | Bug reports | Sources |
| network | bpftool-minimal | 2022-03-08-04c465fd-1 | libc, libelf1 | A tool for inspection and simple manipulation of eBPF programs and maps. | 159kB | 158kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | bpftool-minimal | 2022-03-08-04c465fd-1 | libc, libelf1 | packages:pkgdata:bpftool-minimal, A tool for inspection and simple manipulation of eBPF programs and maps. | 159kB | 158kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | packages:pkgdata:bpftool-minimal, Bug reports | packages:pkgdata:bpftool-minimal, Sources |
| network | fping | 5.0-1 | libc | fping is a ping like program which uses the Internet Control Message Protocol (ICMP) echo request to determine if a target host is responding. fping differs from ping in that you can specify any number of targets on the command line, or specify a file containing the lists of targets to ping. Instead of sending to one target until it times out or replies, fping will send out a ping packet and move on to the next target in a round-robin fashion. | 17kB | 16kB | BSD-4-Clause | Nikil Mehta | Bug reports | Sources |
| network | ppp-mod-pptp | 2.4.9.git-2021-01-04-3 | libc, kmod-pptp, kmod-mppe, resolveip | This package contains a PPtP plugin for ppp. | 17kB | 16kB | BSD-4-Clause | Felix Fietkau | Bug reports | Sources |
| network | snmp-utils | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP client utilities: - snmpget - snmpset - snmpstatus - snmptest - snmptrap - snmpwalk | 16kB | 16kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | umdns | 2021-05-13-b777a0b5-5 | libc, libubox20220515, libubus20220601, libblobmsg-json20220515 | OpenWrt Multicast DNS Daemon | 17kB | 16kB | LGPL-2.1 | John Crispin | Bug reports | Sources |
| network | snmp-utils | 5.9.1-7 | libc, libnetsnmp | packages:pkgdata:snmp-utils, Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP client utilities: - snmpget - snmpset - snmpstatus - snmptest - snmptrap - snmpwalk | 16kB | 16kB | MIT BSD-3-Clause-Clear | Stijn Tintel | packages:pkgdata:snmp-utils, Bug reports | packages:pkgdata:snmp-utils, Sources |
| network | mbusd | 0.5.0-4 | libc, librt, libpthread | Mbusd is open-source Modbus TCP to Modbus RTU (RS-232/485) gateway. It presents a network of RTU slaves as single TCP slave. That is a TCP-Slave (or server) which acts as a RTU-master to get data from Modbus RTU-slave devices. | 17kB | 16kB | BSD-3-Clause | Marcin Jurkowski | Bug reports | Sources |
| network | nut-driver-liebert | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for Liebert contact-closure UPS equipment | 17kB | 16kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | gnunet-communicator-tcp | 0.17.5-4 | libc, librt, libpthread, gnunet | GNUnet tng transport TCP communicator | 17kB | 16kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-communicator-udp | 0.17.5-4 | libc, librt, libpthread, gnunet | GNUnet tng transport UDP communicator | 16kB | 16kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | fping | 5.0-1 | libc | packages:pkgdata:fping, fping is a ping like program which uses the Internet Control Message Protocol (ICMP) echo request to determine if a target host is responding. fping differs from ping in that you can specify any number of targets on the command line, or specify a file containing the lists of targets to ping. Instead of sending to one target until it times out or replies, fping will send out a ping packet and move on to the next target in a round-robin fashion. | 17kB | 16kB | BSD-4-Clause | Nikil Mehta | packages:pkgdata:fping, Bug reports | packages:pkgdata:fping, Sources |
| network | gnunet-communicator-tcp | 0.17.5-4 | libc, librt, libpthread, gnunet | packages:pkgdata:gnunet-communicator-tcp, GNUnet tng transport TCP communicator | 17kB | 16kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-communicator-tcp, Bug reports | packages:pkgdata:gnunet-communicator-tcp, Sources |
| network | gnunet-communicator-udp | 0.17.5-4 | libc, librt, libpthread, gnunet | packages:pkgdata:gnunet-communicator-udp, GNUnet tng transport UDP communicator | 16kB | 16kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-communicator-udp, Bug reports | packages:pkgdata:gnunet-communicator-udp, Sources |
| network | ppp-mod-pptp | 2.4.9.git-2021-01-04-3 | libc, kmod-pptp, kmod-mppe, resolveip | packages:pkgdata:ppp-mod-pptp, This package contains a PPtP plugin for ppp. | 17kB | 16kB | BSD-4-Clause | Felix Fietkau | packages:pkgdata:ppp-mod-pptp, Bug reports | packages:pkgdata:ppp-mod-pptp, Sources |
| network | mosquitto-ssl | 2.0.17-1 | libc, librt, libopenssl1.1, libwebsockets-openssl, cjson | Mosquitto is an open source (BSD licensed) message broker that implements the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight method of carrying out messaging using a publish/subscribe model. This package also includes some basic support for configuring via UCI This package is built with SSL support. TLS-PSK will be included (in both the client and broker) if OpenSSL is built with TLS-PSK support. | 161kB | 160kB | EPL-2.0 | Karl Palsson | Bug reports | Sources |
| network | scapy | 2.4.5-1 | libc, librt, libpthread, python3 | Scapy is a powerful interactive packet manipulation program built on top of the Python interpreter. It can be used to forge or decode packets of a wide number of protocols, send them over the wire, capture them, match requests and replies, and much more. | 1631kB | 1645kB | GPL-2.0-only | W. Michael Petullo | Bug reports | Sources |
| network | scapy | 2.4.5-1 | libc, librt, libpthread, python3 | packages:pkgdata:scapy, Scapy is a powerful interactive packet manipulation program built on top of the Python interpreter. It can be used to forge or decode packets of a wide number of protocols, send them over the wire, capture them, match requests and replies, and much more. | 1631kB | 1645kB | GPL-2.0-only | W. Michael Petullo | packages:pkgdata:scapy, Bug reports | packages:pkgdata:scapy, Sources |
| network | gnunet-hostlist | 0.17.5-4 | libc, gnunet, libmicrohttpd-ssl, gnunet-curl, ca-bundle | GNUnet HTTP bootstrap hostlist client and server | 18kB | 17kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-pgsql | 0.17.5-4 | libc, gnunet, libpq, pgsql-server | GNUnet PostgreSQL backend | 18kB | 17kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | nut-driver-nutdrv_atcl_usb | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for ATCL FOR UPS equipment | 18kB | 17kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | omcproxy | 2021-11-04-bfba2aa7-9 | libc, libubox20220515, libubus20220601 | IGMPv3 and MLDv2 Multicast Proxy | 18kB | 17kB | Apache-2.0 | Steven Barth | Bug reports | Sources |
| network | usbip | 2.0-14 | libc, libwrap, kmod-usbip, libudev, usbids | USB-over-IP (common) | 17kB | 17kB | GPL-2.0-only | Nuno Goncalves | Bug reports | Sources |
| network | ptunnel-ng | 1.42-2 | libc, librt, libpthread | Tunnel TCP connections through ICMP. | 18kB | 17kB | BSD-3 | Toni Uhlig | Bug reports | Sources |
| network | net-tools-route | 2.10-1 | libc, librt, libpthread | Replace busybox version of the route command with the full net-tools version. This is normally not needed as busybox is smaller and provides sufficient functionality, but some users may want or need the full functionality of the net-tools variant (e.g. AF_X25). | 18kB | 17kB | GPL-2.0-or-later | Stijn Segers | Bug reports | Sources |
| network | nut-driver-apcupsd-ups | 2.7.4-27 | libc, nut, nut-server | Driver for apcupsd client access | 18kB | 17kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-etapro | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for ETA UPS equipment | 18kB | 17kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-everups | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for Ever UPS models | 17kB | 17kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-ivtscd | 2.7.4-27 | libc, nut, nut-server | Driver for the IVT Solar Controller Device | 18kB | 17kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | net-tools-route | 2.10-1 | libc, librt, libpthread | packages:pkgdata:net-tools-route, Replace busybox version of the route command with the full net-tools version. This is normally not needed as busybox is smaller and provides sufficient functionality, but some users may want or need the full functionality of the net-tools variant (e.g. AF_X25). | 18kB | 17kB | GPL-2.0-or-later | Stijn Segers | packages:pkgdata:net-tools-route, Bug reports | packages:pkgdata:net-tools-route, Sources |
| network | gnunet-pgsql | 0.17.5-4 | libc, gnunet, libpq, pgsql-server | packages:pkgdata:gnunet-pgsql, GNUnet PostgreSQL backend | 18kB | 17kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-pgsql, Bug reports | packages:pkgdata:gnunet-pgsql, Sources |
| network | gnunet-hostlist | 0.17.5-4 | libc, gnunet, libmicrohttpd-ssl, gnunet-curl, ca-bundle | packages:pkgdata:gnunet-hostlist, GNUnet HTTP bootstrap hostlist client and server | 18kB | 17kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-hostlist, Bug reports | packages:pkgdata:gnunet-hostlist, Sources |
| network | linknx | 0.0.1.38-3 | libc, librt, libpthread, pthsem, lua, luac, libcurl4, libesmtp, libstdcpp6 | KNX home automation platform | 173kB | 173kB | GPL-2.0-or-later | Othmar Truniger | Bug reports | Sources |
| network | nfdump | 1.6.24-1 | libc, libbz2-1.0, musl-fts | NetFlow collecting and processing tools | 179kB | 179kB | BSD-3-Clause | W. Michael Petullo | Bug reports | Sources |
| network | nfdump | 1.6.24-1 | libc, libbz2-1.0, musl-fts | packages:pkgdata:nfdump, NetFlow collecting and processing tools | 179kB | 179kB | BSD-3-Clause | W. Michael Petullo | packages:pkgdata:nfdump, Bug reports | packages:pkgdata:nfdump, Sources |
| network | gnunet-datastore | 0.17.5-4 | libc, gnunet, gnunet-gns | GNUnet data storage components | 19kB | 18kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-gns-proxy | 0.17.5-4 | libc, gnunet, gnunet-gns, gnunet-curl, libmicrohttpd-ssl, libgnutls-dane | GNUnet gns-proxy component | 19kB | 18kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-transport-wlan | 0.17.5-4 | libc, gnunet | GNUnet WLAN transport | 19kB | 18kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | ncp | 1.2.4-1 | libc | copy files over the network | 19kB | 18kB | FREE | Andreas Shimokawa | Bug reports | Sources |
| network | nlbwmon | 2021-09-01-d82c910c-1 | libc, librt, libpthread, libubox20220515, libnl-tiny1, zlib, kmod-nf-conntrack-netlink | OpenWrt Traffic Usage Monitor | 19kB | 18kB | ISC | Jo-Philipp Wich | Bug reports | Sources |
| network | smartsnmpd | 2014-08-13-fb93473d89..98d | libc, libssp, lua, liblua, libubox, libuci-lua, libubus-lua | smartsnmpd is an implementation of SNMP Agent. Its goal is “Easily writing boring SNMP MIB with Lua”. This package add native support for OpenWrt. Include using ubus and uci to get system info/status. And, it use libubox/uloop as low level event-driven library. | 19kB | 18kB | GPL-2.0 | Xiongfei Guo | Bug reports | Sources |
| network | nut-driver-bestuferrups | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for Best Power Micro-Ferrups | 19kB | 18kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| Previous page Next page | ||||||||||