Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network'
| Sınıf | Ad | ↑ Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network | tunneldigger-broker-src | v0.4.0-1 | libc | Tunneldigger is a simple VPN tunneling solution based on the Linux kernel support for L2TPv3 tunnels over UDP. This package contains the broker. This package contains the Python source files for tunneldigger-broker. | 19kB | 18kB | AGPL-3.0 | Nick Hainke | Bug reports | Sources |
| network | tunneldigger-broker | v0.4.0-1 | libc, ip, kmod-l2tp, kmod-l2tp-eth, kmod-sched, libnfnetlink0, libnl-tiny1, libpthread, librt, python3-ctypes, python3-light, python3-logging, tc-tiny | Tunneldigger is a simple VPN tunneling solution based on the Linux kernel support for L2TPv3 tunnels over UDP. This package contains the broker. | 29kB | 28kB | AGPL-3.0 | Nick Hainke | Bug reports | Sources |
| network | libcurl4 | 8.4.0-1 | libc, librt, libpthread, libmbedtls12, libnghttp2-14, ca-bundle | A client-side URL transfer library | 155kB | 154kB | MIT | Stan Grishin | Bug reports | Sources |
| network | conserver | 8.2.6-1 | libc, libopenssl1.1 | Conserver is an application that allows multiple users to watch a serial console at the same time. It can log the data, allows users to take write-access of a console (one at a time), and has a variety of bells and whistles to accentuate that basic functionality. The idea is that conserver will log all your serial traffic so you can go back and review why something crashed, look at changes (if done on the console), or tie the console logs into a monitoring system (just watch the logfiles it creates). With multi-user capabilities you can work on equipment with others, mentor, train, etc. It also does all that client-server stuff so that, assuming you have a network connection, you can interact with any of the equipment from home or wherever. | 111kB | 110kB | BSD-3-Clause | Bjørn Mork | Bug reports | Sources |
| network | conserver | 8.2.1-1 | libc, libssp, libopenssl | packages:pkgdata:conserver, Conserver is an application that allows multiple users to watch a serial console at the same time. It can log the data, allows users to take write-access of a console (one at a time), and has a variety of bells and whistles to accentuate that basic functionality. The idea is that conserver will log all your serial traffic so you can go back and review why something crashed, look at changes (if done on the console), or tie the console logs into a monitoring system (just watch the logfiles it creates). With multi-user capabilities you can work on equipment with others, mentor, train, etc. It also does all that client-server stuff so that, assuming you have a network connection, you can interact with any of the equipment from home or wherever. | 93kB | 92kB | BSD-3-Clause | Bjørn Mork | packages:pkgdata:conserver, Bug reports | packages:pkgdata:conserver, Sources |
| network | ds-lite | 8 | libc, kmod-ip6-tunnel, resolveip | Provides support for Dual-Stack Lite in /etc/config/network. Refer to http://wiki.openwrt.org/doc/uci/network for configuration details. | 1kB | 1kB | GPL-2.0 | Steven Barth | Bug reports | Sources |
| network | dhcpcd | 7.2.2-1 | libc | packages:pkgdata:dhcpcd, DHCPv4, IPv6RS and DHCPv6 client with IPv4LL support dhcpcd is a one stop network management daemon which includes * RFC compliant DHCPv4 and DHCPv6 clients * DHCPv6 Prefix Delegation support * IPv4LL (aka ZeroConf) support * ARP address conflict resolution * Link carrier detection * Wireless SSID profiles * ARP ping profiles | 127kB | 126kB | BSD-2c | Marko Ratkaj | packages:pkgdata:dhcpcd, Bug reports | packages:pkgdata:dhcpcd, Sources |
| network | dhcpcd | 7.2.2-1 | libc | DHCPv4, IPv6RS and DHCPv6 client with IPv4LL support dhcpcd is a one stop network management daemon which includes * RFC compliant DHCPv4 and DHCPv6 clients * DHCPv6 Prefix Delegation support * IPv4LL (aka ZeroConf) support * ARP address conflict resolution * Link carrier detection * Wireless SSID profiles * ARP ping profiles | 127kB | 126kB | BSD-2c | Marko Ratkaj | Bug reports | Sources |
| network | boinc | 7.16.16-1 | libc, curl, bzip2, libstdcpp6, libopenssl1.1, zlib | packages:pkgdata:boinc, The Berkeley Open Infrastructure for Network Computing (BOINC) is a software platform for distributed computing: several initiatives of various scientific disciplines all compete for the idle time of desktop computers. The developers' web site at the University of Berkeley serves as a common portal to the otherwise independently run projects. This package provides the BOINC core client program that is required to participate in any project that uses BOINC to control what projects to join and to determine constraints for the computation like the percentage of CPU time. OpenWrt does not provide the graphical BOINC Manager, but you can connect to this machine from the BOINC Manager of your desktop computer. | 759kB | 759kB | GPL-3.0-or-later | Christian Dreihsig, Steffen Moeller, | packages:pkgdata:boinc, Bug reports | packages:pkgdata:boinc, Sources |
| network | boinc | 7.16.16-1 | libc, curl, bzip2, libstdcpp6, libopenssl1.1, zlib | The Berkeley Open Infrastructure for Network Computing (BOINC) is a software platform for distributed computing: several initiatives of various scientific disciplines all compete for the idle time of desktop computers. The developers' web site at the University of Berkeley serves as a common portal to the otherwise independently run projects. This package provides the BOINC core client program that is required to participate in any project that uses BOINC to control what projects to join and to determine constraints for the computation like the percentage of CPU time. OpenWrt does not provide the graphical BOINC Manager, but you can connect to this machine from the BOINC Manager of your desktop computer. | 759kB | 759kB | GPL-3.0-or-later | Christian Dreihsig, Steffen Moeller, | Bug reports | Sources |
| network | ipset | 7.15-2 | libc, kmod-ipt-ipset, libmnl0, libipset13 | packages:pkgdata:ipset, IPset administration utility | 2kB | 1kB | GPL-2.0 | Jo-Philipp Wich | packages:pkgdata:ipset, Bug reports | packages:pkgdata:ipset, Sources |
| network | libipset13 | 7.15-2 | libc, kmod-ipt-ipset, libmnl0 | IPset administration utility | 43kB | 42kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | ipset | 7.15-2 | libc, kmod-ipt-ipset, libmnl0, libipset13 | IPset administration utility | 2kB | 1kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | seafile-server-fuse | 7.1.5-2 | libc, librt, libpthread, bash, glib2, jansson4, libevent2-7, libevent2-openssl7, libfuse1, libmariadb3, libopenssl1.1, libsearpc, libsqlite3-0, libuuid1, procps-ng, procps-ng-pkill, seafile-ccnet, seafile-server, zlib | Open source cloud storage with advanced features on privacy protection and teamwork. This package contains the FUSE extension (seaf-fuse) for Seafile server. | 45kB | 45kB | AGPL-3.0-only | Alexandru Ardelean, Jeffery To, | Bug reports | Sources |
| network | seafile-server | 7.1.5-2 | libc, bash, glib2, jansson4, libarchive, libevent2-7, libevent2-openssl7, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1, oniguruma5, procps-ng, procps-ng-pkill, python3-pymysql, python3-seafile-server, seafile-ccnet, seafile-seahub, sqlite3-cli, zlib | Open source cloud storage with advanced features on privacy protection and teamwork. | 428kB | 430kB | AGPL-3.0-only | Alexandru Ardelean, Jeffery To, | Bug reports | Sources |
| network | seafile-seahub-src | 7.1.5-1 | libc | The web end of seafile server. Note: Localization support is turned off by default for performance reasons. Set 'USE_I18N = True' in /etc/seafile/conf/seahub_settings.py to use languages other than English. This package contains the Python source files for seafile-seahub. | 516kB | 515kB | Apache-2.0 | Alexandru Ardelean, Jeffery To, | Bug reports | Sources |
| network | seafile-seahub | 7.1.5-1 | libc, librt, libpthread, gunicorn3, python3, python3-chardet, python3-cryptodome, python3-dateutil, python3-django1, python3-django-formtools, python3-django-picklefield, python3-django-postoffice, python3-django-restframework39, python3-django-simple-captcha, python3-django-statici18n, python3-django-webpack-loader, python3-openpyxl, python3-pillow, python3-pyjwt, python3-pymysql, python3-pytz, python3-qrcode, python3-requests, python3-requests-oauthlib, python3-seafile-ccnet, python3-searpc | The web end of seafile server. Note: Localization support is turned off by default for performance reasons. Set 'USE_I18N = True' in /etc/seafile/conf/seahub_settings.py to use languages other than English. | 20973kB | 21038kB | Apache-2.0 | Alexandru Ardelean, Jeffery To, | Bug reports | Sources |
| network | seafile-ccnet | 7.1.5-1 | libc, glib2, jansson4, libevent2-7, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1 | Ccnet is a framework for writing networked applications in C. | 137kB | 137kB | AGPL-3.0-only | Alexandru Ardelean, Jeffery To, | Bug reports | Sources |
| network | vxlan | 7 | libc, kmod-vxlan | Virtual eXtensible LAN config support in /etc/config/network. | 2kB | 1kB | GPL-2.0 | Matthias Schiffer | Bug reports | Sources |
| network | map | 7 | libc, kmod-ip6-tunnel, libubox20220515, libubus20220601, iptables-mod-conntrack-extra, kmod-nat46 | Provides support for MAP-E (RFC7597), MAP-T (RFC7599) and Lightweight 4over6 (RFC7596) in /etc/config/network. MAP combines address and port translation with the tunneling of IPv4 packets over an IPv6 network | 7kB | 7kB | GPL-2.0 | Hans Dedecker | Bug reports | Sources |
| network | ltq-vdsl-vr9-vectoring-fw-installer | 6.8.6-4 | libc, kmod-ltq-vdsl-vr9 | VDSL2 Vectoring Firmware installer | 5kB | 4kB | Daniel Golle | Bug reports | Sources | |
| network | libipset | 6.38-1 | libc, libssp, kmod-ipt-ipset, libmnl | IPset administration utility | 30kB | 30kB | GPL-2.0 | Jo-Philipp Wich | Bug reports | Sources |
| network | smbinfo | 6.11-2 | libc, kmod-fs-cifs | packages:pkgdata:smbinfo, SMB info | 8kB | 8kB | GPL-3.0-or-later | common packages maintainers | packages:pkgdata:smbinfo, Bug reports | packages:pkgdata:smbinfo, Sources |
| network | cifsmount | 6.11-2 | libc, kmod-fs-cifs | packages:pkgdata:cifsmount, CIFS mount | 13kB | 12kB | GPL-3.0-or-later | common packages maintainers | packages:pkgdata:cifsmount, Bug reports | packages:pkgdata:cifsmount, Sources |
| network | smbinfo | 6.11-2 | libc, kmod-fs-cifs | SMB info | 8kB | 8kB | GPL-3.0-or-later | common packages maintainers | Bug reports | Sources |
| network | cifsmount | 6.11-2 | libc, kmod-fs-cifs | CIFS mount | 13kB | 12kB | GPL-3.0-or-later | common packages maintainers | Bug reports | Sources |
| network | portmap | 6.0-4 | libc, libssp, libwrap, librpc | Portmap is a server that converts RPC (Remote Procedure Call) program numbers into DARPA protocol port numbers. | 6kB | 5kB | BSD-4c | Peter Wagner | Bug reports | Sources |
| network | tmate-ssh-server | 511fd2bd852464e768242..4-2 | libc, libevent2-7, libncurses6, libpthread, libssh, msgpack-c, terminfo, openssh-keygen | tmate-ssh-server is the server side part of tmate.io. | 241kB | 241kB | ISC | Paul Spooren | Bug reports | Sources |
| network | atlas-sw-probe-rpc | 5080-2 | libc, atlas-probe, bind-dig, rpcd | packages:pkgdata:atlas-sw-probe-rpc, Provides ubus calls for probe. | 1kB | 0kB | GPL-3.0-or-later | Jan Pavlinec | packages:pkgdata:atlas-sw-probe-rpc, Bug reports | packages:pkgdata:atlas-sw-probe-rpc, Sources |
| network | atlas-sw-probe | 5080-2 | libc, librt, libpthread, atlas-probe, dropbearconvert | RIPE Atlas SW probe is software variant of RIPE Atlas Probe. It contains utilities which helps actively measure Internet connectivity through ping, traceroute, DNS, SSL/TLS, NTP, and HTTP. Data are then collected, aggregated and published by the RIPE NCC. | 20kB | 19kB | GPL-3.0-or-later | Jan Pavlinec | Bug reports | Sources |
| network | atlas-sw-probe-rpc | 5080-2 | libc, atlas-probe, bind-dig, rpcd | Provides ubus calls for probe. | 1kB | 0kB | GPL-3.0-or-later | Jan Pavlinec | Bug reports | Sources |
| network | snmp-utils | 5.9.1-7 | libc, libnetsnmp | packages:pkgdata:snmp-utils, Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP client utilities: - snmpget - snmpset - snmpstatus - snmptest - snmptrap - snmpwalk | 16kB | 16kB | MIT BSD-3-Clause-Clear | Stijn Tintel | packages:pkgdata:snmp-utils, Bug reports | packages:pkgdata:snmp-utils, Sources |
| network | snmptrapd | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP notification receiver. | 22kB | 21kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmpd | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP agent, dynamically linked. | 11kB | 10kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmp-utils | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP client utilities: - snmpget - snmpset - snmpstatus - snmptest - snmptrap - snmpwalk | 16kB | 16kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmp-mibs | 5.9.1-7 | libc | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP MIB-Files. | 333kB | 332kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | snmp-mibs | 5.7.3-10 | libc | packages:pkgdata:snmp-mibs, Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP MIB-Files. | 328kB | 327kB | MIT BSD-3-Clause-Clear | Stijn Tintel | packages:pkgdata:snmp-mibs, Bug reports | packages:pkgdata:snmp-mibs, Sources |
| network | v2ray-extra | 5.7.0-1 | libc, v2ray-core | Project V is a set of network tools that help you to build your own computer network. It secures your network connections and thus protects your privacy. This includes extra resources for v2ray-core. | 292kB | 291kB | MIT | Tianling Shen | Bug reports | Sources |
| network | v2ray-example | 5.7.0-1 | libc, v2ray-core | Project V is a set of network tools that help you to build your own computer network. It secures your network connections and thus protects your privacy. This includes example configuration files for v2ray-core. | 1kB | 0kB | MIT | Tianling Shen | Bug reports | Sources |
| network | v2ray-core | 5.7.0-1 | libc, ca-bundle | Project V is a set of network tools that help you to build your own computer network. It secures your network connections and thus protects your privacy. | 8213kB | 8240kB | MIT | Tianling Shen | Bug reports | Sources |
| network | stunnel | 5.62-3 | libc, libopenssl1.1, zlib, libpthread | Stunnel is a program that allows you to encrypt arbitrary TCP connections inside SSL (Secure Sockets Layer) available on both Unix and Windows. Stunnel can allow you to secure non-SSL aware daemons and protocols (like POP, IMAP, LDAP, etc) by having Stunnel provide the encryption, requiring no changes to the daemon's code. | 85kB | 84kB | GPL-2.0-or-later | Florian Eckert | Bug reports | Sources |
| network | iw-full | 5.16-1 | libc, libnl-tiny1 | packages:pkgdata:iw-full, cfg80211 interface configuration utility (full version) | 84kB | 83kB | GPL-2.0 | Felix Fietkau | packages:pkgdata:iw-full, Bug reports | packages:pkgdata:iw-full, Sources |
| network | ethtool | 5.16-1 | libc, librt, libpthread | packages:pkgdata:ethtool, ethtool is a small utility for examining and tuning your ethernet-based network interface | 34kB | 33kB | GPL-2.0 | Felix Fietkau | packages:pkgdata:ethtool, Bug reports | packages:pkgdata:ethtool, Sources |
| network | ethtool-full | 5.16-1 | libc, librt, libpthread, libmnl0 | packages:pkgdata:ethtool-full, ethtool is a small utility for examining and tuning your ethernet-based network interface | 133kB | 132kB | GPL-2.0 | Felix Fietkau | packages:pkgdata:ethtool-full, Bug reports | packages:pkgdata:ethtool-full, Sources |
| network | iw | 5.16-1 | libc, libnl-tiny1 | packages:pkgdata:iw, cfg80211 interface configuration utility | 48kB | 48kB | GPL-2.0 | Felix Fietkau | packages:pkgdata:iw, Bug reports | packages:pkgdata:iw, Sources |
| network | ethtool-full | 5.16-1 | libc, librt, libpthread, libmnl0 | ethtool is a small utility for examining and tuning your ethernet-based network interface | 133kB | 132kB | GPL-2.0 | Felix Fietkau | Bug reports | Sources |
| network | iw-full | 5.16-1 | libc, libnl-tiny1 | cfg80211 interface configuration utility (full version) | 84kB | 83kB | GPL-2.0 | Felix Fietkau | Bug reports | Sources |
| network | iw | 5.16-1 | libc, libnl-tiny1 | cfg80211 interface configuration utility | 48kB | 48kB | GPL-2.0 | Felix Fietkau | Bug reports | Sources |
| network | ethtool | 5.16-1 | libc, librt, libpthread | ethtool is a small utility for examining and tuning your ethernet-based network interface | 34kB | 33kB | GPL-2.0 | Felix Fietkau | Bug reports | Sources |
| network | libbpf0 | 5.10.10-2 | libc, libelf1 | libbpf is a library for loading eBPF programs and reading and manipulating eBPF objects from user-space. | 94kB | 93kB | LGPL-2.1 OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| Next page | ||||||||||