Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network---wireless'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | ↑ Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network---wireless | reaver | 1.6.6-1 | libc, librt, libpthread, libpcap1 | Reaver has been designed to be a robust and practical attack against Wi-Fi Protected Setup (WPS) registrar PINs in order to recover WPA/WPA2 passphrases. It has been tested against a wide variety of access points and WPS implementations. This is reaver-wps-fork-t6x, a community forked version, which has included various bug fixes and additional attack method (the offline Pixie Dust attack). | 217kB | 284kB | GPL-2.0 | Yousong Zhou | Bug reports | Sources |
| network---wireless | pixiewps | 1.4.2-2 | libc, librt, libpthread | Pixiewps is a tool written in C used to bruteforce offline the WPS PIN exploiting the low or non-existing entropy of some Access Points, the so-called “pixie-dust attack” discovered by Dominique Bongard in summer 2014. It is meant for educational purposes only. | 31kB | 31kB | GPL-3.0 | Yousong Zhou | Bug reports | Sources |
| network---wireless | dynapoint | 3 | libc, lua, libubus-lua, libuci-lua, libubox-lua, luci-lib-nixio | packages:pkgdata:dynapoint, Dynapoint uses LUA scripts to allow dynamic access point creation and deletion depending on changes of certain network conditions. | 3kB | 2kB | GPL-3.0-or-later | Tobias Ilte | packages:pkgdata:dynapoint, Bug reports | packages:pkgdata:dynapoint, Sources |
| network---wireless | dynapoint | 3 | libc, lua, libubus-lua, libuci-lua, libubox-lua, luci-lib-nixio | Dynapoint uses LUA scripts to allow dynamic access point creation and deletion depending on changes of certain network conditions. | 3kB | 2kB | GPL-3.0-or-later | Tobias Ilte | Bug reports | Sources |
| network---wireless | airmon-ng | 1.6-3 | libc, librt, libpthread, wireless-tools, ethtool, procps-ng | Bash script designed to turn wireless cards into monitor mode. | 13kB | 13kB | GPL-2.0-or-later | Rick Farina | Bug reports | Sources |
| network---wireless | aircrack-ng | 1.6-3 | libc, libpcap1, libpcre, libpthread, libstdcpp6, libopenssl1.1, libnl-core200, libnl-genl200, zlib | WLAN tools for breaking 802.11 WEP/WPA keys | 442kB | 443kB | GPL-2.0-or-later | Rick Farina | Bug reports | Sources |
| network---wireless | wifischedule | 1-3 | libc | packages:pkgdata:wifischedule, Turns WiFi on and off according to a schedule defined in UCI. | 3kB | 3kB | PRPL | Nils Koenig | packages:pkgdata:wifischedule, Bug reports | packages:pkgdata:wifischedule, Sources |
| network---wireless | wifischedule | 1-3 | libc | Turns WiFi on and off according to a schedule defined in UCI. | 3kB | 3kB | PRPL | Nils Koenig | Bug reports | Sources |
| network---wireless | wavemon | 0.9.3-1 | libc, libncurses6, libpthread, libnl-genl200 | wavemon is a ncurses-based monitoring application for wireless network devices. It currently works under Linux with devices that are supported by the wireless extensions by Jean Tourrilhes (included in Kernel 2.4 and higher), e.g. the Lucent Orinoco cards. | 29kB | 28kB | GPL-2.0-or-later | Jonathan McCrohan | Bug reports | Sources |
| network---wireless | kismet-server | 2016-07-R1-5 | libc, uclibcxx, libnl200, libpcap1, libpcre, libcap, wireless-tools | An 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. This package contains the kismet server. | 347kB | 347kB | LGPLv2.1 | Jean-Michel lacroix | Bug reports | Sources |
| network---wireless | kismet-drone | 2016-07-R1-5 | libc, uclibcxx, libnl200, libpcap1, libpcre, libcap, wireless-tools | An 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. This package contains the kismet remote sniffing.and monitoring drone. | 199kB | 198kB | LGPLv2.1 | Jean-Michel lacroix | Bug reports | Sources |
| network---wireless | kismet-client | 2016-07-R1-5 | libc, uclibcxx, libnl200, libncurses6 | An 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. This package contains the kismet text interface client. | 274kB | 273kB | LGPLv2.1 | Jean-Michel lacroix | Bug reports | Sources |
| network---wireless | horst | 5.1-4 | libc, libncurses6, libnl-tiny1 | [horst] is a scanning and analysis tool for 802.11 wireless networks and especially IBSS (ad-hoc) mode and mesh networks (OLSR). | 45kB | 44kB | GPL-2.0-or-later | Bruno Randolf | Bug reports | Sources |
| network---wireless | hcxtools | 6.2.4-1 | libc, librt, libpthread, libpcap1, zlib, libcurl4, libopenssl1.1 | packages:pkgdata:hcxtools, Set of tools convert packets from captures (h = hash, c = capture, convert and calculate candidates, x = different hashtypes) for the use with latest hashcat or John the Ripper. | 131kB | 131kB | MIT | Andreas Nilsen | packages:pkgdata:hcxtools, Bug reports | packages:pkgdata:hcxtools, Sources |
| network---wireless | hcxdumptool | 6.2.4-1 | libc, libpcap1, libopenssl1.1 | packages:pkgdata:hcxdumptool, Small tool to capture packets from wlan devices. After capturing, upload the “uncleaned” cap here (https://wpa-sec.stanev.org/?submit) to see if your ap or the client is vulnerable by using common wordlists. Convert the cap to hccapx and/or to WPA-PMKID-PBKDF2 hashline (16800) with hcxpcaptool (hcxtools) and check if wlan-key or plainmasterkey was transmitted unencrypted. | 60kB | 59kB | MIT | Andreas Nilsen | packages:pkgdata:hcxdumptool, Bug reports | packages:pkgdata:hcxdumptool, Sources |
| network---wireless | hcxtools | 6.2.4-1 | libc, librt, libpthread, libpcap1, zlib, libcurl4, libopenssl1.1 | Set of tools convert packets from captures (h = hash, c = capture, convert and calculate candidates, x = different hashtypes) for the use with latest hashcat or John the Ripper. | 131kB | 131kB | MIT | Andreas Nilsen | Bug reports | Sources |
| network---wireless | hcxdumptool | 6.2.4-1 | libc, libpcap1, libopenssl1.1 | Small tool to capture packets from wlan devices. After capturing, upload the “uncleaned” cap here (https://wpa-sec.stanev.org/?submit) to see if your ap or the client is vulnerable by using common wordlists. Convert the cap to hccapx and/or to WPA-PMKID-PBKDF2 hashline (16800) with hcxpcaptool (hcxtools) and check if wlan-key or plainmasterkey was transmitted unencrypted. | 60kB | 59kB | MIT | Andreas Nilsen | Bug reports | Sources |