This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network'

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisans BakıcıHata raporuKaynak kod
networkudpxy1.0-25.1-1libc, librt, libpthreadudproxy makes it possible to convert UDP IPTV streams into HTTP
streams which can be viewed even over WLANs. HTTP streams do
not generate huge amounts of multicast traffic, so a sd stream
only takes about 300k. Interesting for peoply who have IPTV at
home and do not want to rent multiple decoders from their
provider but just use their own streaming client (for example
popcornhour/mediatomb/vlc).

30kB29kBGPL-3.0-or-laterÁlvaro Fernández RojasBug reportsSources
networkpen0.34.1-3libc, libopenssl1.1packages:pkgdata:pen, This is pen, a load balancer for “simple” TCP based protocols
such as HTTP or SMTP. It allows several servers to appear as
one to the outside and automatically detects servers that are
down and distributes clients among the available servers.
This gives high availability and scalable performance.

52kB51kBGPL-2.0-or-latercommon packages maintainerspackages:pkgdata:pen, Bug reportspackages:pkgdata:pen, Sources
networkiptraf-ng1.1.4-1libc, libncurses6packages:pkgdata:iptraf-ng, iptraf-ng is a console-based network statistics utility for Linux. It gathers a
variety of figures such as TCP connection packet and byte counts, interface
statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN
station packet and byte counts.

71kB70kBGPL-2.0common packages maintainerspackages:pkgdata:iptraf-ng, Bug reportspackages:pkgdata:iptraf-ng, Sources
networktac_plus4.0.4.28-2libcpackages:pkgdata:tac_plus, TACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built without PAM support.

42kB41kBcommon packages maintainerspackages:pkgdata:tac_plus, Bug reportspackages:pkgdata:tac_plus, Sources
networksmbinfo6.11-2libc, kmod-fs-cifspackages:pkgdata:smbinfo, SMB info

8kB8kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:smbinfo, Bug reportspackages:pkgdata:smbinfo, Sources
networkfoolsm1.0.13-2libc, msmtppackages:pkgdata:foolsm, foolsm is a link state monitor for carrying out actions when a link
transistions from the up to down state or vice versa.

30kB29kBGPL-2.0-onlycommon packages maintainerspackages:pkgdata:foolsm, Bug reportspackages:pkgdata:foolsm, Sources
networknut-common2.7.4-27libc, librt, libpthread, nut, libusb-compat4, libneonpackages:pkgdata:nut-common, Network UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
This package contains the common files.

15kB14kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-common, Bug reportspackages:pkgdata:nut-common, Sources
networkcifsmount6.11-2libc, kmod-fs-cifspackages:pkgdata:cifsmount, CIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:cifsmount, Bug reportspackages:pkgdata:cifsmount, Sources
networkjool-tools-netfilter2022-01-20-3libc, libnl200, kmod-jool-netfilterpackages:pkgdata:jool-tools-netfilter, Jool is an Open Source SIIT and NAT64 for Linux.

This package provides the userspace control programs for Jool.

127kB126kBGPL-2.0-onlycommon packages maintainerspackages:pkgdata:jool-tools-netfilter, Bug reportspackages:pkgdata:jool-tools-netfilter, Sources
networknut-server2.7.4-27libc, nut, nut-commonpackages:pkgdata:nut-server, Network UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
upsd is responsible for serving the data from the drivers to the
clients. It connects to each driver and maintains a local cache of the
current state. Queries from the clients are served from this cache, so
delays are minimal. This program is essential, and must be running at
all times to actually make any use out of the drivers and clients.

47kB46kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-server, Bug reportspackages:pkgdata:nut-server, Sources
networknut-driver-powercom2.7.4-27libc, librt, libpthread, nut, nut-serverpackages:pkgdata:nut-driver-powercom, Driver for serial Powercom/Trust/Advice UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-driver-powercom, Bug reportspackages:pkgdata:nut-driver-powercom, Sources
networkmiredo1.2.6-3libc, librt, libpthread, kmod-tunpackages:pkgdata:miredo, Miredo is an open-source Teredo IPv6 tunneling software, for Linux and the BSD
operating systems. It includes functional implementations of all components of
the Teredo specification (client, relay and server). It is meant to provide
IPv6 connectivity even from behind NAT devices.

35kB34kBGPL-2.0-or-latercommon packages maintainerspackages:pkgdata:miredo, Bug reportspackages:pkgdata:miredo, Sources
networknut-driver-genericups2.7.4-27libc, librt, libpthread, nut, nut-serverpackages:pkgdata:nut-driver-genericups, Driver for contact-closure UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-driver-genericups, Bug reportspackages:pkgdata:nut-driver-genericups, Sources
networknut-driver-netxml-ups2.7.4-27libc, nut, nut-serverDriver for NetXML based UPS equipment

34kB33kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networkjool-tools-netfilter2022-01-20-3libc, libnl200, kmod-jool-netfilterJool is an Open Source SIIT and NAT64 for Linux.

This package provides the userspace control programs for Jool.

127kB126kBGPL-2.0-onlycommon packages maintainersBug reportsSources
networkpcapplusplus21.11-1libc, librt, libpthread, libpcap1, libstdcpp6Library for getting information about the passing traffic

270kB271kBUnlicensecommon packages maintainersBug reportsSources
networkudptunnel1.1-1libcUDPTunnel is a small program which can tunnel UDP packets bi-directionally
over a TCP connection. Its primary purpose (and original motivation) is to
allow multi-media conferences to traverse a firewall which allows only outgoing
TCP connections.

5kB4kBBSD-3-Clausecommon packages maintainersBug reportsSources
networktac_plus4.0.4.28-2libcTACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built without PAM support.

42kB41kBcommon packages maintainersBug reportsSources
networktac_plus-pam4.0.4.28-2libc, libpamTACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built with PAM support.

48kB47kBcommon packages maintainersBug reportsSources
networksmbinfo6.11-2libc, kmod-fs-cifsSMB info

8kB8kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networksamba4-utils4.18.8-1libc, samba4-libsinstalls: smbstatus smbtree mvxattr smbtar (smbcquotas)

Utilities collection

31kB31kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-libs4.18.8-1libc, libtirpc, libreadline8, libpopt0, libcap, zlib, libgnutls, libtasn1, libuuid1, libopenssl1.1, libpthread, liburing, libpam, attr, libavahi-clientSamba 4.18.8 libs

8765kB8820kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-client4.18.8-1libc, samba4-libsinstalls: cifsdd smbclient smbget

The smbclient program implements a simple ftp-like client for accessing SMB shares

95kB95kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networkrpcbind1.2.6-2libc, libtirpc, libwrapThe rpcbind utility is a server that converts RPC program numbers into universal addresses.
It must be running on the host to be able to make RPC calls on a server on that machine.

Rpcbind replaces portmap for NFS v2/v3. It has more features, like ipv6 support.
Note: Nfs4 only configurations can run without it.

29kB28kBBSD-3-Clausecommon packages maintainersBug reportsSources
networknut-driver-victronups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for IMV/Victron UPS unit Match

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-upscode22.7.4-27libc, librt, libpthread, nut, nut-serverDriver for UPScode II compatible UPS equipment

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-tripplitesu2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Tripp-Lite SmartOnline (SU) UPS equipment

20kB20kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-tripplite2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Tripp-Lite SmartPro UPS equipment

19kB19kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-solis2.7.4-27libc, nut, nut-serverDriver for Brazilian Microsol SOLIS UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-safenet2.7.4-27libc, nut, nut-serverDriver for SafeNet compatible UPS equipment

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-riello_ser2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Riello UPS Protocol UPS equipment

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-rhino2.7.4-27libc, nut, nut-serverDriver for Brazilian Microsol RHINO UPS equipment

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-powerpanel2.7.4-27libc, nut, nut-serverDriver for PowerPanel Plus compatible UPS equipment

29kB29kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-powercom2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for serial Powercom/Trust/Advice UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-oneac2.7.4-27libc, nut, nut-serverDriver for Oneac UPS equipment

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-oldmge-shut2.7.4-27libc, nut, nut-serverDriver for SHUT Protocol UPS equipment

32kB31kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-microdowell2.7.4-27libc, nut, nut-serverDriver for Microdowell Enterprise UPS series

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-mge-utalk2.7.4-27libc, nut, nut-serverDriver for MGE UPS SYSTEMS UTalk protocol equipment

26kB25kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-mge-shut2.7.4-27libc, nut, nut-serverDriver for SHUT Protocol UPS equipment

46kB45kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-metasys2.7.4-27libc, nut, nut-serverDriver for Meta System UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-masterguard2.7.4-27libc, nut, nut-serverDriver for Masterguard UPS equipment

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-liebert2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Liebert contact-closure UPS equipment

17kB16kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-liebert-esp22.7.4-27libc, nut, nut-serverDriver for Liebert UPS

24kB23kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-ivtscd2.7.4-27libc, nut, nut-serverDriver for the IVT Solar Controller Device

18kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-isbmex2.7.4-27libc, nut, nut-serverDriver for ISBMEX UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-genericups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for contact-closure UPS equipment

19kB18kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-gamatronic2.7.4-27libc, nut, nut-serverDriver for Gamatronic UPS equipment

25kB24kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-everups2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for Ever UPS models

17kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-etapro2.7.4-27libc, librt, libpthread, nut, nut-serverDriver for ETA UPS equipment

18kB17kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
networknut-driver-dummy-ups2.7.4-27libc, nut, nut-serverDriver for multi-purpose UPS emulation

23kB22kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainersBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun