This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='base-system'

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisans BakıcıHata raporuKaynak kod
base-systemauc0.3.1-1libc, attendedsysupgrade-common, libblobmsg-json20220515, libubox20220515, libubus20220601, libuci20130104, libuclient20201210, rpcd-mod-rpcsysCLI client for attended-sysupgrade

14kB13kBGPL-3.0common packages maintainersBug reportsSources
base-systemiucode-tool2.3.1-2libcpackages:pkgdata:iucode-tool, Intel microcode loader

28kB27kBGPL-2.0Zoltan HERPAIpackages:pkgdata:iucode-tool, Bug reportspackages:pkgdata:iucode-tool, Sources
base-systemiucode-tool2.3.1-2libcIntel microcode loader

28kB27kBGPL-2.0Zoltan HERPAIBug reportsSources
base-systemsqm-scripts1.5.2-1libc, tc, kmod-sched-cake, kmod-ifb, iptables, iptables-mod-ipoptA set of scripts that does simple SQM configuration.

18kB17kBGPL-2.0-onlyToke Høiland-JørgensenBug reportsSources
base-systemrefpolicy2.20200229-3libcpackages:pkgdata:refpolicy, The SELinux Reference Policy project (refpolicy) is a
complete SELinux policy that can be used as the system
policy for a variety of systems and used as the basis for
creating other policies. Reference Policy was originally
based on the NSA example policy, but aims to accomplish many
additional goals.

The current refpolicy does not fully support OpenWRT and
needs modifications to work with the default system file
layout. These changes should be added as patches to the
refpolicy that modify a single SELinux policy.

The refpolicy works for the most part in permissive
mode. Only the basic set of utilities are enabled in the
example policy config and some of the pathing in the
policies is not correct. Individual policies would need to
be tweaked to get everything functioning properly.

791kB813kBGPL-2.0-or-laterThomas Petazzonipackages:pkgdata:refpolicy, Bug reportspackages:pkgdata:refpolicy, Sources
base-systemrefpolicy2.20200229-3libcThe SELinux Reference Policy project (refpolicy) is a
complete SELinux policy that can be used as the system
policy for a variety of systems and used as the basis for
creating other policies. Reference Policy was originally
based on the NSA example policy, but aims to accomplish many
additional goals.

The current refpolicy does not fully support OpenWRT and
needs modifications to work with the default system file
layout. These changes should be added as patches to the
refpolicy that modify a single SELinux policy.

The refpolicy works for the most part in permissive
mode. Only the basic set of utilities are enabled in the
example policy config and some of the pathing in the
policies is not correct. Individual policies would need to
be tweaked to get everything functioning properly.

791kB813kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
base-systemnft-qos1.0.6-4libc, kmod-nft-netdev, kmod-nft-bridge, nftablesThis package provides implementation for qos over nftables.
Currently, static/dynamic qos and traffic shaping are supported.

5kB4kBGPL-2.0Rosy SongBug reportsSources
base-systembcm4908img3libcpackages:pkgdata:bcm4908img, CFE bootloader for BCM4908 uses custom image format. It consists of:
1. Optional cferom image
2. bootfs JFFS2 partition (cferam, kernel, DTB and optional helper files)
3. padding
4. rootfs simply appended to the bootfs + padding
5. tail with checksum and basic device info

This util allows creating, modifying and extracting from BCM4908 images.

7kB6kBRafał Miłeckipackages:pkgdata:bcm4908img, Bug reportspackages:pkgdata:bcm4908img, Sources
base-systembcm4908img3libcCFE bootloader for BCM4908 uses custom image format. It consists of:
1. Optional cferom image
2. bootfs JFFS2 partition (cferam, kernel, DTB and optional helper files)
3. padding
4. rootfs simply appended to the bootfs + padding
5. tail with checksum and basic device info

This util allows creating, modifying and extracting from BCM4908 images.

7kB6kBRafał MiłeckiBug reportsSources
base-systemotrx2021-12-02-56e8e191-1libcThis package contains an utility that allows validating TRX images.

6kB5kBRafał MiłeckiBug reportsSources
base-systemoseama1libcThis package contains an utility that allows handling Seama images.

6kB6kBRafał MiłeckiBug reportsSources
base-systemosafeloader1libcThis package contains an utility that allows handling SafeLoader images.

5kB4kBRafał MiłeckiBug reportsSources
base-systemattendedsysupgrade-common7libc, rpcd, rpcd-mod-rpcsysCommon needed files for attendedsysupgrade tool

Manages dependencies and brings settings used by clients.

UCI options:

* attendedsysupgrade.server.url
URL of compatible upgrade server [1]

* attendedsysupgrade.client.upgrade_packages
Client should request image also if no new release but new packages
upgrade are available.

* attendedsysupgrade.client.advanced_mode
Offer advanced options like editing packages before request and show
additional information.

* attendedsysupgrade.client.auto_search
Tells the client to automattically search for upgrades

[1]: https://github.com/aparcar/asu

1kB0kBGPL-2.0Paul SpoorenBug reportsSources
base-systemdnsmasq2.86-16libc, libubus20220601packages:pkgdata:dnsmasq, It is intended to provide coupled DNS and DHCP service to a LAN.

136kB135kBGPL-2.0OpenWrt teampackages:pkgdata:dnsmasq, Bug reportspackages:pkgdata:dnsmasq, Sources
base-systemurngd2023-11-01-44365eb1-1libc, libubox20220515packages:pkgdata:urngd, urngd is OpenWrt's micro non-physical true random number generator based on
timing jitter.

Using the Jitter RNG core, the rngd provides an entropy source that feeds into
the Linux /dev/random device if its entropy runs low. It updates the
/dev/random entropy estimator such that the newly provided entropy unblocks
/dev/random.

The seeding of /dev/random also ensures that /dev/urandom benefits from
entropy. Especially during boot time, when the entropy of Linux is low, the
Jitter RNGd provides a source of sufficient entropy.

8kB7kBGPL-2.0 BSD-3-ClauseOpenWrt teampackages:pkgdata:urngd, Bug reportspackages:pkgdata:urngd, Sources
base-systemmtd26libc, libubox20220515packages:pkgdata:mtd, This package contains an utility useful to upgrade from other firmware or
older OpenWrt releases.

11kB11kBGPL-2.0+OpenWrt teampackages:pkgdata:mtd, Bug reportspackages:pkgdata:mtd, Sources
base-systemdnsmasq-full2.86-16libc, libubus20220601, libnettle8, kmod-ipt-ipset, libnetfilter-conntrack3packages:pkgdata:dnsmasq-full, It is intended to provide coupled DNS and DHCP service to a LAN.

This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS
and IPset, Conntrack support & NO_ID enabled by default.

187kB187kBGPL-2.0OpenWrt teampackages:pkgdata:dnsmasq-full, Bug reportspackages:pkgdata:dnsmasq-full, Sources
base-systemzram-swap32libc, kmod-zrampackages:pkgdata:zram-swap, A script to activate swaping on a compressed zram partition. This
could be used to increase the available memory, by using compressed
memory.

2kB1kBOpenWrt teampackages:pkgdata:zram-swap, Bug reportspackages:pkgdata:zram-swap, Sources
base-systemca-bundle20230311-1libcpackages:pkgdata:ca-bundle, System CA certificates as a bundle

121kB120kBOpenWrt teampackages:pkgdata:ca-bundle, Bug reportspackages:pkgdata:ca-bundle, Sources
base-systemurandom-seed3libc, getrandom/etc/urandom.seed handling for OpenWrt

1kB0kBGPL-2.0-onlyOpenWrt teamBug reportsSources
base-systemurngd2023-11-01-44365eb1-1libc, libubox20220515urngd is OpenWrt's micro non-physical true random number generator based on
timing jitter.

Using the Jitter RNG core, the rngd provides an entropy source that feeds into
the Linux /dev/random device if its entropy runs low. It updates the
/dev/random entropy estimator such that the newly provided entropy unblocks
/dev/random.

The seeding of /dev/random also ensures that /dev/urandom benefits from
entropy. Especially during boot time, when the entropy of Linux is low, the
Jitter RNGd provides a source of sufficient entropy.

8kB7kBGPL-2.0 BSD-3-ClauseOpenWrt teamBug reportsSources
base-systemom-watchdog4libcThis package contains the hw watchdog script for the OM1P and OM2P device.

1kB0kBOpenWrt teamBug reportsSources
base-systemmtd26libc, libubox20220515This package contains an utility useful to upgrade from other firmware or
older OpenWrt releases.

11kB11kBGPL-2.0+OpenWrt teamBug reportsSources
base-systemdropbear2022.82-2libcA small SSH2 server/client designed for small memory environments.

115kB115kBMITOpenWrt teamBug reportsSources
base-systemdnsmasq2.86-16libc, libubus20220601It is intended to provide coupled DNS and DHCP service to a LAN.

136kB135kBGPL-2.0OpenWrt teamBug reportsSources
base-systemdnsmasq-full2.86-16libc, libubus20220601, libnettle8, kmod-ipt-ipset, libnetfilter-conntrack3It is intended to provide coupled DNS and DHCP service to a LAN.

This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS
and IPset, Conntrack support & NO_ID enabled by default.

187kB187kBGPL-2.0OpenWrt teamBug reportsSources
base-systemdnsmasq-dhcpv62.86-16libc, libubus20220601It is intended to provide coupled DNS and DHCP service to a LAN.

This is a variant with DHCPv6 support

162kB161kBGPL-2.0OpenWrt teamBug reportsSources
base-systemca-certificates20230311-1libcSystem CA certificates

131kB130kBOpenWrt teamBug reportsSources
base-systemca-bundle20230311-1libcSystem CA certificates as a bundle

121kB120kBOpenWrt teamBug reportsSources
base-systembase-files1490-r19685-512e76967flibc, netifd, jsonfilter, usign, openwrt-keyring, fstools, fwtoolThis package contains a base filesystem and system scripts for OpenWrt.

45kB44kBGPL-2.0OpenWrt teamBug reportsSources
base-systemzram-swap32libc, kmod-zramA script to activate swaping on a compressed zram partition. This
could be used to increase the available memory, by using compressed
memory.

2kB1kBOpenWrt teamBug reportsSources
base-systembridge1.7.1-1libcpackages:pkgdata:bridge, Manage ethernet bridging: a way to connect networks together to
form a larger network.

9kB8kBGPL-2.0-or-laterNikolay Martynovpackages:pkgdata:bridge, Bug reportspackages:pkgdata:bridge, Sources
base-systembridge1.7.1-1libcManage ethernet bridging: a way to connect networks together to
form a larger network.

9kB8kBGPL-2.0-or-laterNikolay MartynovBug reportsSources
base-systemsqm-scripts-extra2016-06-08-1libc, sqm-scriptsA set of experimental scripts for sqm-scripts QoS package. The contents of this package may
change as new qdiscs like 'cake' are developed and tested.

3kB2kBGPLv2Kevin Darbyshire-Bryant, Sebastian Moeller,Bug reportsSources
base-systemblock-mount2022-06-02-93369be0-2libc, ubox, libubox20220515, libuci20130104, libblobmsg-json20220515, libjson-c5packages:pkgdata:block-mount, Block device mounting and checking

32kB32kBGPL-2.0John Crispinpackages:pkgdata:block-mount, Bug reportspackages:pkgdata:block-mount, Sources
base-systemgetrandom2021-08-03-205defb5-2libcpackages:pkgdata:getrandom, OpenWrt getrandom system helper

2kB1kBGPL-2.0John Crispinpackages:pkgdata:getrandom, Bug reportspackages:pkgdata:getrandom, Sources
base-systemfstools2022-06-02-93369be0-2libc, uboxpackages:pkgdata:fstools, OpenWrt filesystem tools

19kB19kBGPL-2.0John Crispinpackages:pkgdata:fstools, Bug reportspackages:pkgdata:fstools, Sources
base-systemprocd-ujail2022-06-01-7a009685-2libc, libubox20220515, libubus20220601, libuci20130104, libblobmsg-json20220515OpenWrt process jail helper

42kB42kBGPL-2.0John CrispinBug reportsSources
base-systemprocd-ujail-console2021-02-23-37eed131-1libc, librt, libpthread, procd-ujail, libubus20210630, libubox20210516OpenWrt process jail console

4kB3kBGPL-2.0John CrispinBug reportsSources
base-systemprocd-selinux2022-06-01-7a009685-2libc, ubusd, ubus, libjson-script20220515, ubox, libubox20220515, libubus20220601, libblobmsg-json20220515, libjson-c5, jshn, libselinuxOpenWrt system process manager with SELinux support

59kB58kBGPL-2.0John CrispinBug reportsSources
base-systemprocd-seccomp2022-06-01-7a009685-2libc, libubox20220515, libblobmsg-json20220515OpenWrt process seccomp helper + utrace

18kB17kBGPL-2.0John CrispinBug reportsSources
base-systemgetrandom2021-08-03-205defb5-2libcOpenWrt getrandom system helper

2kB1kBGPL-2.0John CrispinBug reportsSources
base-systemubox2021-08-03-205defb5-2libc, libubox20220515, ubusd, ubus, libubus20220601, libuci20130104OpenWrt system helper toolbox

17kB16kBGPL-2.0John CrispinBug reportsSources
base-systemsnapshot-tool2022-06-02-93369be0-2libc, librt, libpthread, libubox20220515, fstoolsrootfs snapshoting tool

4kB3kBGPL-2.0John CrispinBug reportsSources
base-systemprocd2022-06-01-7a009685-2libc, ubusd, ubus, libjson-script20220515, ubox, libubox20220515, libubus20220601, libblobmsg-json20220515, libjson-c5, jshnOpenWrt system process manager

58kB57kBGPL-2.0John CrispinBug reportsSources
base-systemopenwrt-keyring2022-03-25-62471e69-3libcThe keyring of with the developer using and gpg public keys.

1kB0kBGPL-2.0John CrispinBug reportsSources
base-systemlogd2021-08-03-205defb5-2libc, libubox20220515, libubus20220601, libblobmsg-json20220515OpenWrt system log implementation

11kB10kBGPL-2.0John CrispinBug reportsSources
base-systemfstools2022-06-02-93369be0-2libc, uboxOpenWrt filesystem tools

19kB19kBGPL-2.0John CrispinBug reportsSources
base-systemblockd2022-06-02-93369be0-2libc, block-mount, fstools, libubus20220601, kmod-fs-autofs4, libblobmsg-json20220515, libjson-c5Block device automounting

7kB6kBGPL-2.0John CrispinBug reportsSources
base-systemblock-mount2022-06-02-93369be0-2libc, ubox, libubox20220515, libuci20130104, libblobmsg-json20220515, libjson-c5Block device mounting and checking

32kB32kBGPL-2.0John CrispinBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun