Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network---ip-addresses-and-names'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | ↑ Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network---ip-addresses-and-names | nsd-control | 4.2.4-1 | libc, librt, libpthread, libopenssl1.1 | NSD is an authoritative only, high performance, simple and open source name server. | 79kB | 78kB | BSD-3-Clause | Vasilis Tsiligiannis | Bug reports | Sources |
| network---ip-addresses-and-names | nsd-control-setup | 4.2.4-1 | libc, librt, libpthread, openssl-util | NSD is an authoritative only, high performance, simple and open source name server. | 3kB | 2kB | BSD-3-Clause | Vasilis Tsiligiannis | Bug reports | Sources |
| network---ip-addresses-and-names | dnslookup | 1.9.1-1 | libc, ca-bundle | packages:pkgdata:dnslookup, Simple command line utility to make DNS lookups. Supports all known DNS protocols: plain DNS, DoH, DoT, DoQ, DNSCrypt. | 2805kB | 2810kB | MIT | Tianling Shen | packages:pkgdata:dnslookup, Bug reports | packages:pkgdata:dnslookup, Sources |
| network---ip-addresses-and-names | dnsproxy | 0.52.0-2 | libc, ca-bundle | packages:pkgdata:dnsproxy, A simple DNS proxy server that supports all existing DNS protocols including DNS-over-TLS, DNS-over-HTTPS, DNSCrypt, and DNS-over-QUIC.Moreover, it can work as a DNS-over-HTTPS, DNS-over-TLS or DNS-over-QUIC server. | 3557kB | 3564kB | Apache-2.0 | Tianling Shen | packages:pkgdata:dnsproxy, Bug reports | packages:pkgdata:dnsproxy, Sources |
| network---ip-addresses-and-names | v2ray-geosite | 20230803193133-1 | libc, librt, libpthread | Geosite List for V2Ray | 451kB | 451kB | MIT | Tianling Shen | Bug reports | Sources |
| network---ip-addresses-and-names | dnslookup | 1.9.1-1 | libc, ca-bundle | Simple command line utility to make DNS lookups. Supports all known DNS protocols: plain DNS, DoH, DoT, DoQ, DNSCrypt. | 2805kB | 2810kB | MIT | Tianling Shen | Bug reports | Sources |
| network---ip-addresses-and-names | v2ray-geoip | 202308030045-1 | libc, librt, libpthread | GeoIP List for V2Ray | 2156kB | 2407kB | CC-BY-SA-4.0 | Tianling Shen | Bug reports | Sources |
| network---ip-addresses-and-names | dnsproxy | 0.52.0-2 | libc, ca-bundle | A simple DNS proxy server that supports all existing DNS protocols including DNS-over-TLS, DNS-over-HTTPS, DNSCrypt, and DNS-over-QUIC.Moreover, it can work as a DNS-over-HTTPS, DNS-over-TLS or DNS-over-QUIC server. | 3557kB | 3564kB | Apache-2.0 | Tianling Shen | Bug reports | Sources |
| network---ip-addresses-and-names | avahi-nodbus-daemon | 0.8-8 | libc, libavahi-nodbus-support, libexpat, librt, libdaemon | packages:pkgdata:avahi-nodbus-daemon, Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains an mDNS/DNS-SD daemon. | 24kB | 22kB | LGPL-2.1-or-later | Ted Hess | packages:pkgdata:avahi-nodbus-daemon, Bug reports | packages:pkgdata:avahi-nodbus-daemon, Sources |
| network---ip-addresses-and-names | avahi-dbus-daemon | 0.8-8 | libc, libavahi-dbus-support, libexpat, librt, libdaemon | packages:pkgdata:avahi-dbus-daemon, Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains an mDNS/DNS-SD daemon. | 40kB | 39kB | LGPL-2.1-or-later | Ted Hess | packages:pkgdata:avahi-dbus-daemon, Bug reports | packages:pkgdata:avahi-dbus-daemon, Sources |
| network---ip-addresses-and-names | avahi-utils | 0.8-8 | libc, librt, libpthread, libavahi-client, libgdbm | packages:pkgdata:avahi-utils, Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This packages installs the following avahi utility programs: avahi-browse, avahi-publish, avahi-resolve, avahi-set-host-name. It also automatically adds the required libavahi-client package. For more information please see the avahi documentation. | 17kB | 16kB | LGPL-2.1-or-later | Ted Hess | packages:pkgdata:avahi-utils, Bug reports | packages:pkgdata:avahi-utils, Sources |
| network---ip-addresses-and-names | avahi-daemon-service-http | 0.8-8 | libc, librt, libpthread, avahi-daemon | packages:pkgdata:avahi-daemon-service-http, Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains the service definition for announcing HTTP service. | 1kB | 0kB | LGPL-2.1-or-later | Ted Hess | packages:pkgdata:avahi-daemon-service-http, Bug reports | packages:pkgdata:avahi-daemon-service-http, Sources |
| network---ip-addresses-and-names | avahi-utils | 0.8-8 | libc, librt, libpthread, libavahi-client, libgdbm | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This packages installs the following avahi utility programs: avahi-browse, avahi-publish, avahi-resolve, avahi-set-host-name. It also automatically adds the required libavahi-client package. For more information please see the avahi documentation. | 17kB | 16kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network---ip-addresses-and-names | avahi-nodbus-daemon | 0.8-8 | libc, libavahi-nodbus-support, libexpat, librt, libdaemon | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains an mDNS/DNS-SD daemon. | 24kB | 22kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network---ip-addresses-and-names | avahi-dnsconfd | 0.8-8 | libc, libavahi, libdaemon, libpthread | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains a Unicast DNS server from mDNS/DNS-SD configuration daemon, which may be used to configure conventional DNS servers using mDNS in a DHCP-like fashion. Especially useful on IPv6. | 8kB | 7kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network---ip-addresses-and-names | avahi-dbus-daemon | 0.8-8 | libc, libavahi-dbus-support, libexpat, librt, libdaemon | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains an mDNS/DNS-SD daemon. | 40kB | 39kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network---ip-addresses-and-names | avahi-daemon-service-ssh | 0.8-8 | libc, avahi-daemon | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains the service definition for announcing SSH service. | 1kB | 0kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network---ip-addresses-and-names | avahi-daemon-service-http | 0.8-8 | libc, librt, libpthread, avahi-daemon | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains the service definition for announcing HTTP service. | 1kB | 0kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network---ip-addresses-and-names | avahi-autoipd | 0.8-8 | libc, libdaemon | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package implements IPv4LL, “Dynamic Configuration of IPv4 Link-Local Addresses” (IETF RFC3927), a protocol for automatic IP address configuration from the link-local 169.254.0.0/16 range without the need for a central server. It is primarily intended to be used in ad-hoc networks which lack a DHCP server. | 15kB | 14kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network---ip-addresses-and-names | ohybridproxy | 2020-05-22-0dfef1eb-3 | libc, libubox20220515, mdnsd | This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. | 11kB | 10kB | GPL-2.0-only | Steven Barth | Bug reports | Sources |
| network---ip-addresses-and-names | zonestitcher | 2020-05-22-0dfef1eb-3 | libc, libubox20220515 | This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. | 9kB | 8kB | GPL-2.0-only | Steven Barth | Bug reports | Sources |
| network---ip-addresses-and-names | announce | 1.0.1-1 | libc, libpthread | packages:pkgdata:announce, Announce services on the network with Zeroconf/Bonjour. This announces services such as ssh, sftp, and http running on the local machine to the network. | 11kB | 10kB | BSD-3-Clause | Simon Peter | packages:pkgdata:announce, Bug reports | packages:pkgdata:announce, Sources |
| network---ip-addresses-and-names | announce | 1.0.1-1 | libc, libpthread | Announce services on the network with Zeroconf/Bonjour. This announces services such as ssh, sftp, and http running on the local machine to the network. | 11kB | 10kB | BSD-3-Clause | Simon Peter | Bug reports | Sources |
| network---ip-addresses-and-names | dhcp-forwarder | 0.11-1 | libc, librt, libpthread | packages:pkgdata:dhcp-forwarder, This program forwards DHCP messages between subnets with different sublayer broadcast domains. It is similarly to the DHCP relay agent dhcrelay of ISC's DHCP, but has the following features which are important for me: - Runs as non-root in a chroot-jail - Uses “normal” AF_INET sockets; this allows to uses packetfilters to filter incoming messages. - The DHCP agent IDs can be defined freely - Has a small memory footprint when using dietlibc It tries to be RFC 2131/2132 and 3046 compliant. Probably it works with BOOTP (RFC 951) also, but since the handling of the giaddr field is described misleading (see RFC 1542), there may occur problems. | 15kB | 14kB | GPL-2.0 | Scott K Logan | packages:pkgdata:dhcp-forwarder, Bug reports | packages:pkgdata:dhcp-forwarder, Sources |
| network---ip-addresses-and-names | dhcp-forwarder | 0.11-1 | libc, librt, libpthread | This program forwards DHCP messages between subnets with different sublayer broadcast domains. It is similarly to the DHCP relay agent dhcrelay of ISC's DHCP, but has the following features which are important for me: - Runs as non-root in a chroot-jail - Uses “normal” AF_INET sockets; this allows to uses packetfilters to filter incoming messages. - The DHCP agent IDs can be defined freely - Has a small memory footprint when using dietlibc It tries to be RFC 2131/2132 and 3046 compliant. Probably it works with BOOTP (RFC 951) also, but since the handling of the giaddr field is described misleading (see RFC 1542), there may occur problems. | 15kB | 14kB | GPL-2.0 | Scott K Logan | Bug reports | Sources |
| network---ip-addresses-and-names | overture | 1.7-1 | libc | Overture is a DNS server/forwarder/dispatcher written in Go. | 2811kB | 2817kB | MIT | Richard Yu | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-dyndns-ipv6 | 4.4.3-1 | libc, zlib, isc-dhcp-server-ipv6, bind-server, bind-client | packages:pkgdata:isc-dhcp-dyndns-ipv6, implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. | 0kB | 0kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-dyndns-ipv6, Bug reports | packages:pkgdata:isc-dhcp-dyndns-ipv6, Sources |
| network---ip-addresses-and-names | isc-dhcp-omshell-ipv6 | 4.4.3-1 | libc, isc-dhcp-server-ipv6 | packages:pkgdata:isc-dhcp-omshell-ipv6, provides an interactive way to connect to, query, and possibly change, the ISC DHCP Server's state via OMAPI, the Object Management API. This package is compiled with IPv4 and IPv6 support. | 979kB | 979kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-omshell-ipv6, Bug reports | packages:pkgdata:isc-dhcp-omshell-ipv6, Sources |
| network---ip-addresses-and-names | isc-dhcp-server-ipv6 | 4.4.3-1 | libc, zlib | packages:pkgdata:isc-dhcp-server-ipv6, implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. | 1121kB | 1120kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-server-ipv6, Bug reports | packages:pkgdata:isc-dhcp-server-ipv6, Sources |
| network---ip-addresses-and-names | isc-dhcp-client-ipv4 | 4.4.3-1 | libc, zlib | packages:pkgdata:isc-dhcp-client-ipv4, provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address. This package is compiled with IPv4 support only. | 999kB | 998kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-client-ipv4, Bug reports | packages:pkgdata:isc-dhcp-client-ipv4, Sources |
| network---ip-addresses-and-names | isc-dhcp-relay-ipv6 | 4.4.3-1 | libc, zlib | packages:pkgdata:isc-dhcp-relay-ipv6, provides a means for relaying DHCP and BOOTP requests from a subnet to which no DHCP server is directly connected to one or more DHCP servers on other subnets. This package is compiled with IPv4 and IPv6 support. | 983kB | 983kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-relay-ipv6, Bug reports | packages:pkgdata:isc-dhcp-relay-ipv6, Sources |
| network---ip-addresses-and-names | isc-dhcp-dyndns-ipv6 | 4.4.3-1 | libc, zlib, isc-dhcp-server-ipv6, bind-server, bind-client | implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. | 0kB | 0kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-dyndns-ipv4 | 4.4.3-1 | libc, zlib, isc-dhcp-server-ipv4, bind-server, bind-client | implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 support only. | 0kB | 0kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-server-ipv6 | 4.4.3-1 | libc, zlib | implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. | 1121kB | 1120kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-server-ipv4 | 4.4.3-1 | libc, zlib | implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 support only. | 1085kB | 1085kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-relay-ipv6 | 4.4.3-1 | libc, zlib | provides a means for relaying DHCP and BOOTP requests from a subnet to which no DHCP server is directly connected to one or more DHCP servers on other subnets. This package is compiled with IPv4 and IPv6 support. | 983kB | 983kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-relay-ipv4 | 4.4.3-1 | libc, librt, libpthread, zlib | provides a means for relaying DHCP and BOOTP requests from a subnet to which no DHCP server is directly connected to one or more DHCP servers on other subnets. This package is compiled with IPv4 support only. | 734kB | 733kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-omshell-ipv6 | 4.4.3-1 | libc, isc-dhcp-server-ipv6 | provides an interactive way to connect to, query, and possibly change, the ISC DHCP Server's state via OMAPI, the Object Management API. This package is compiled with IPv4 and IPv6 support. | 979kB | 979kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-omshell-ipv4 | 4.4.3-1 | libc, isc-dhcp-server-ipv4 | provides an interactive way to connect to, query, and possibly change, the ISC DHCP Server's state via OMAPI, the Object Management API. This package is compiled with IPv4 support only. | 971kB | 971kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-client-ipv6 | 4.4.3-1 | libc, librt, libpthread, zlib | provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address. This package is compiled with IPv4 and IPv6 support. | 840kB | 840kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-client-ipv4 | 4.4.3-1 | libc, zlib | provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address. This package is compiled with IPv4 support only. | 999kB | 998kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | dnsdist | 1.7.2-3 | libc, libh2o-evloop, libnghttp2-14, libopenssl1.1, libnetsnmp, re2-6, libfstrm, libsodium, libatomic1, libcap, libedit, libstdcpp6, lmdb, luajit, tinycdb1 | packages:pkgdata:dnsdist, dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life is to route traffic to the best server, delivering top performance to legitimate users while shunting or blocking abusive traffic. | 1867kB | 1873kB | GPL-2.0-only | Peter van Dijk | packages:pkgdata:dnsdist, Bug reports | packages:pkgdata:dnsdist, Sources |
| network---ip-addresses-and-names | pdns-backend-pipe | 4.6.3-1 | libc, libatomic1, pdns | packages:pkgdata:pdns-backend-pipe, PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the Pipe backend for the PowerDNS nameserver. | 32kB | 31kB | Peter van Dijk | packages:pkgdata:pdns-backend-pipe, Bug reports | packages:pkgdata:pdns-backend-pipe, Sources | |
| network---ip-addresses-and-names | pdns-tools | 4.6.3-1 | libc, libatomic1, boost, boost-program_options, libcurl4, libmbedtls12, libopenssl1.1, p11-kit, protobuf | packages:pkgdata:pdns-tools, PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains several tools to debug DNS issues. These tools do not require any part of the PowerDNS server components to work. * dnsbulktest: A resolver stress-tester * dnsgram: Show per 5-second statistics to study intermittent resolver issues * dnsreplay: Replay a pcap with DNS queries * dnsscan: Prints the query-type amounts in a pcap * dnsscope: Calculates statistics without replaying traffic * dnstcpbench: Perform TCP benchmarking of DNS servers * dnswasher: Clean a pcap of identifying IP information * ixplore: Explore diffs from IXFRs * nsec3dig: Calculate the correctness of NSEC3 proofs * saxfr: AXFR zones and show extra information | 3765kB | 3772kB | Peter van Dijk | packages:pkgdata:pdns-tools, Bug reports | packages:pkgdata:pdns-tools, Sources | |
| network---ip-addresses-and-names | pdns | 4.6.3-1 | libc, libatomic1, boost, boost-program_options, libcurl4, liblua5.1.5, libopenssl1.1, libsqlite3-0, p11-kit | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This is the authoritative nameserver that answers questions about domains that it knows about. You also need at least one backend installed to serve data. | 2928kB | 2933kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-tools | 4.6.3-1 | libc, libatomic1, boost, boost-program_options, libcurl4, libmbedtls12, libopenssl1.1, p11-kit, protobuf | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains several tools to debug DNS issues. These tools do not require any part of the PowerDNS server components to work. * dnsbulktest: A resolver stress-tester * dnsgram: Show per 5-second statistics to study intermittent resolver issues * dnsreplay: Replay a pcap with DNS queries * dnsscan: Prints the query-type amounts in a pcap * dnsscope: Calculates statistics without replaying traffic * dnstcpbench: Perform TCP benchmarking of DNS servers * dnswasher: Clean a pcap of identifying IP information * ixplore: Explore diffs from IXFRs * nsec3dig: Calculate the correctness of NSEC3 proofs * saxfr: AXFR zones and show extra information | 3765kB | 3772kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-recursor | 4.7.4-1 | libc, boost, boost-context, boost-filesystem, libatomic1, liblua5.1.5, libopenssl1.1, libfstrm, libcurl4 | High-performance resolving name server, utilizing multiple processor and including Lua scripting capabilities. | 1852kB | 1868kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-ixfrdist | 4.6.3-1 | libc, libatomic1, boost, boost-program_options, libopenssl1.1, libyaml-cpp0.7, p11-kit, protobuf | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the ixfrdist tool that can redistribute multiple versions of zones over AXFR and IXFR. This tool does not require any part of the PowerDNS server components to work. | 390kB | 391kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-backend-sqlite3 | 4.6.3-1 | libc, libatomic1, pdns, libsqlite3-0 | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the SQLite 3 backend for the PowerDNS nameserver. | 15kB | 14kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-backend-remote | 4.6.3-1 | libc, libatomic1, pdns | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the Remote backend for the PowerDNS nameserver. | 118kB | 118kB | Peter van Dijk | Bug reports | Sources | |
| Previous page Next page | ||||||||||