Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network---vpn'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | ↑ Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network---vpn | strongswan-mod-ctr | 5.9.5-13.1 | libc, strongswan | StrongSwan Counter Mode wrapper crypto plugin | 2kB | 2kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-coupling | 5.9.5-13.1 | libc, librt, libpthread, strongswan | StrongSwan IKEv2 plugin to couple peer certificates permanently to authentication plugin | 4kB | 3kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-constraints | 5.9.5-13.1 | libc, strongswan | StrongSwan advanced X509 constraint checking plugin | 5kB | 4kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-connmark | 5.9.5-13.1 | libc, strongswan, libip4tc2 | StrongSwan netfilter connection marking plugin | 4kB | 4kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-cmac | 5.9.5-13.1 | libc, strongswan | StrongSwan CMAC crypto plugin | 3kB | 3kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-ccm | 5.9.5-13.1 | libc, strongswan | StrongSwan CCM AEAD wrapper crypto plugin | 4kB | 3kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-blowfish | 5.9.5-13.1 | libc, strongswan | StrongSwan Blowfish crypto plugin | 8kB | 7kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-attr | 5.9.5-13.1 | libc, strongswan | StrongSwan file based config plugin | 4kB | 4kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-attr-sql | 5.9.5-13.1 | libc, librt, libpthread, strongswan, strongswan-charon | StrongSwan SQL based config plugin | 17kB | 16kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-agent | 5.9.5-13.1 | libc, strongswan | StrongSwan SSH agent signing plugin | 5kB | 4kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-af-alg | 5.9.5-13.1 | libc, strongswan, kmod-crypto-user | StrongSwan AF_ALG crypto interface to Linux Crypto API plugin | 6kB | 6kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-aes | 5.9.5-13.1 | libc, strongswan | StrongSwan AES crypto plugin | 15kB | 15kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-mod-addrblock | 5.9.5-13.1 | libc, strongswan | StrongSwan RFC 3779 address block constraint support plugi | 3kB | 2kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-minimal | 5.9.5-13.1 | libc, strongswan, strongswan-charon, strongswan-mod-aes, strongswan-mod-gmp, strongswan-mod-hmac, strongswan-mod-kernel-netlink, strongswan-mod-nonce, strongswan-mod-pubkey, strongswan-mod-random, strongswan-mod-sha1, strongswan-mod-socket-default, strongswan-mod-stroke, strongswan-mod-updown, strongswan-mod-x509, strongswan-mod-xcbc | StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This meta-package contains only dependencies for a minimal IKEv2 setup. | 1kB | 0kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-libtls | 5.9.5-13.1 | libc, strongswan | StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains libtls for strongSwan plugins eap-tls, eap-ttls, eap-peap, tnc-tnccs | 49kB | 48kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-isakmp | 5.9.5-13.1 | libc, strongswan, strongswan-charon, strongswan-ipsec, strongswan-mod-aes, strongswan-mod-des, strongswan-mod-gmpdh, strongswan-mod-hmac, strongswan-mod-kernel-netlink, strongswan-mod-md5, strongswan-mod-nonce, strongswan-mod-pubkey, strongswan-mod-random, strongswan-mod-sha1, strongswan-mod-socket-default, strongswan-mod-stroke, strongswan-mod-uci, strongswan-mod-updown | StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This meta-package contains only dependencies to establish ISAKMP / IKE PSK connections, dropping other capabilities in favor of small size Can fit most routers even with 4Mb flash (after removing IPv6 support). | 1kB | 0kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-ipsec | 5.9.5-13.1 | libc, strongswan | StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains the ipsec utility. | 6kB | 5kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-full | 5.9.5-13.1 | libc, strongswan, strongswan-charon, strongswan-charon-cmd, strongswan-ipsec, strongswan-libnttfft, strongswan-mod-addrblock, strongswan-mod-aes, strongswan-mod-af-alg, strongswan-mod-agent, strongswan-mod-attr, strongswan-mod-attr-sql, strongswan-mod-bliss, strongswan-mod-blowfish, strongswan-mod-ccm, strongswan-mod-chapoly, strongswan-mod-cmac, strongswan-mod-constraints, strongswan-mod-connmark, strongswan-mod-coupling, strongswan-mod-ctr, strongswan-mod-curl, strongswan-mod-curve25519, strongswan-mod-des, strongswan-mod-dhcp, strongswan-mod-dnskey, strongswan-mod-duplicheck, strongswan-mod-eap-identity, strongswan-mod-eap-md5, strongswan-mod-eap-mschapv2, strongswan-mod-eap-radius, strongswan-mod-eap-tls, strongswan-mod-farp, strongswan-mod-fips-prf, strongswan-mod-forecast, strongswan-mod-gcm, strongswan-mod-gcrypt, strongswan-mod-gmp, strongswan-mod-ha, strongswan-mod-hmac, strongswan-mod-kernel-netlink, strongswan-mod-ldap, strongswan-mod-led, strongswan-mod-load-tester, strongswan-mod-nonce, strongswan-mod-md4, strongswan-mod-md5, strongswan-mod-mgf1, strongswan-mod-mysql, strongswan-mod-newhope, strongswan-mod-ntru, strongswan-mod-openssl, strongswan-mod-pem, strongswan-mod-pgp, strongswan-mod-pkcs1, strongswan-mod-pkcs7, strongswan-mod-pkcs8, strongswan-mod-pkcs11, strongswan-mod-pkcs12, strongswan-mod-pubkey, strongswan-mod-random, strongswan-mod-rc2, strongswan-mod-resolve, strongswan-mod-revocation, strongswan-mod-sha1, strongswan-mod-sha2, strongswan-mod-sha3, strongswan-mod-smp, strongswan-mod-socket-default, strongswan-mod-sql, strongswan-mod-sqlite, strongswan-mod-sshkey, strongswan-mod-stroke, strongswan-mod-test-vectors, strongswan-mod-uci, strongswan-mod-unity, strongswan-mod-updown, strongswan-mod-vici, strongswan-mod-whitelist, strongswan-mod-wolfssl, strongswan-mod-x509, strongswan-mod-xauth-eap, strongswan-mod-xauth-generic, strongswan-mod-xcbc, strongswan-pki, strongswan-scepclient, strongswan-swanctl | StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This meta-package contains dependencies for all of the strongswan plugins except kernel-libipsec, socket-dynamic and which are omitted in favor of the kernel-netlink and socket-default plugins. | 1kB | 0kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-default | 5.9.5-13.1 | libc, strongswan, strongswan-charon, strongswan-mod-aes, strongswan-mod-attr, strongswan-mod-connmark, strongswan-mod-constraints, strongswan-mod-des, strongswan-mod-dnskey, strongswan-mod-fips-prf, strongswan-mod-gmp, strongswan-mod-hmac, strongswan-mod-kernel-netlink, strongswan-mod-md5, strongswan-mod-nonce, strongswan-mod-pem, strongswan-mod-pgp, strongswan-mod-pkcs1, strongswan-mod-pubkey, strongswan-mod-random, strongswan-mod-rc2, strongswan-mod-resolve, strongswan-mod-revocation, strongswan-mod-sha1, strongswan-mod-sha2, strongswan-mod-socket-default, strongswan-mod-sshkey, strongswan-mod-updown, strongswan-mod-x509, strongswan-mod-xauth-generic, strongswan-mod-xcbc, strongswan-swanctl | StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This meta-package contains only dependencies to match upstream defaults. | 1kB | 0kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-charon | 5.9.5-13.1 | libc, strongswan | StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains charon, an IKEv2 keying daemon. | 212kB | 212kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | strongswan-charon-cmd | 5.9.5-13.1 | libc, librt, libpthread, strongswan, strongswan-charon | StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains the charon-cmd utility. | 8kB | 7kB | GPL-2.0-or-later | Philip Prindeville, Noel Kuntze, | Bug reports | Sources |
| network---vpn | netbird | 0.17.0-1 | libc | NetBird is an open-source VPN management platform built on top of WireGuard® making it easy to create secure private networks for your organization or home. It requires zero configuration effort leaving behind the hassle of opening ports, complex firewall rules, VPN gateways, and so forth. | 7327kB | 7337kB | BSD-3-Clause | Oskari Rauta | Bug reports | Sources |
| network---vpn | chaosvpn | 2.19-4 | libc, tinc, ip, kmod-tun, libopenssl1.1, zlib | packages:pkgdata:chaosvpn, Configure tincd for the chaosvpn network | 43kB | 42kB | Apache-2.0 | Norbert Summer | packages:pkgdata:chaosvpn, Bug reports | packages:pkgdata:chaosvpn, Sources |
| network---vpn | chaosvpn | 2.19-4 | libc, tinc, ip, kmod-tun, libopenssl1.1, zlib | Configure tincd for the chaosvpn network | 43kB | 42kB | Apache-2.0 | Norbert Summer | Bug reports | Sources |
| network---vpn | ipsec-tools | 0.8.2-7 | libc, libssp, libopenssl, kmod-ipsec | IPsec management tools | 249kB | 248kB | BSD-3-Clause | Noah Meyerhans | Bug reports | Sources |
| network---vpn | vpnc-scripts | 20151220-2 | libc, librt, libpthread | This package contains the vpnc-script which is used by vpnc and OpenConnect to configure the tunnel interface. | 3kB | 2kB | Nikos Mavrogiannopoulos | Bug reports | Sources | |
| network---vpn | openconnect | 9.01-1 | libc, librt, libpthread, libxml2, kmod-tun, resolveip, vpnc-scripts, libgnutls, libtasn1 | A VPN client compatible with several SSL VPN implementations (ocserv, Cisco AnyConnect, Juniper, Palo Alto) OpenConnect is an SSL VPN client initially created to support Cisco's AnyConnect SSL VPN. It has since been extended to support the Pulse Connect Secure VPN (formerly known as Juniper Network Connect or Junos Pulse) and the Palo Alto Networks GlobalProtect SSL VPN. A corresponding OpenConnect VPN server implementation can be found in the ocserv package. | 150kB | 149kB | LGPL-2.1-or-later | Nikos Mavrogiannopoulos | Bug reports | Sources |
| network---vpn | ocserv | 1.1.6-2 | libc, libhttp-parser, libgnutls, certtool, libncurses6, libreadline8, libprotobuf-c, libev, kmod-tun | OpenConnect server (ocserv) is an SSL VPN server. Its purpose is to be a secure, small, fast and configurable VPN server. It implements the OpenConnect SSL VPN protocol, and has also (currently experimental) compatibility with clients using the AnyConnect SSL VPN protocol. The OpenConnect VPN protocol uses the standard IETF security protocols such as TLS 1.2, and Datagram TLS to provide the secure VPN service. | 258kB | 258kB | GPL-2.0-or-later | Nikos Mavrogiannopoulos | Bug reports | Sources |
| network---vpn | zerotier | 1.12.1-1 | libc, librt, libpthread, libstdcpp6, kmod-tun, ip, libminiupnpc, libnatpmp1, libatomic1 | ZeroTier creates a global provider-independent virtual private cloud network. | 502kB | 501kB | BSL 1.1 | Moritz Warning | Bug reports | Sources |
| network---vpn | fastd | 22-3 | libc, kmod-tun, libpthread, libuecc, libjson-c5 | packages:pkgdata:fastd, Fast and secure tunneling daemon, which is optimized on small code size and few dependencies | 60kB | 59kB | BSD-2-Clause LGPL-2.1-or-later | Matthias Schiffer | packages:pkgdata:fastd, Bug reports | packages:pkgdata:fastd, Sources |
| network---vpn | fastd | 22-3 | libc, kmod-tun, libpthread, libuecc, libjson-c5 | Fast and secure tunneling daemon, which is optimized on small code size and few dependencies | 60kB | 59kB | BSD-2-Clause LGPL-2.1-or-later | Matthias Schiffer | Bug reports | Sources |
| network---vpn | openvpn-wolfssl | 2.5.7-3 | libc, kmod-tun, libwolfssl5.6.4.ee39414e | Open source VPN solution using WolfSSL \(experimental\) | 225kB | 224kB | GPL-2.0 | Magnus Kroken | Bug reports | Sources |
| network---vpn | openvpn-openssl | 2.5.7-3 | libc, librt, libpthread, kmod-tun, liblzo2, libopenssl1.1 | Open source VPN solution using OpenSSL | 186kB | 186kB | GPL-2.0 | Magnus Kroken | Bug reports | Sources |
| network---vpn | openvpn-mbedtls | 2.5.7-3 | libc, librt, libpthread, kmod-tun, libmbedtls12 | Open source VPN solution using mbedTLS | 180kB | 180kB | GPL-2.0 | Magnus Kroken | Bug reports | Sources |
| network---vpn | openvpn-easy-rsa | 3.0.8-4 | libc, openssl-util | CLI utility to build and manage a PKI CA. | 28kB | 27kB | GPL-2.0 | Luiz Angelo Daros de Luca | Bug reports | Sources |
| network---vpn | openfortivpn | 1.17.1-1 | libc, librt, libpthread, ppp, libopenssl1.1 | An open implementation of Fortinet's proprietary PPP+SSL VPN solution It spawns a pppd process and operates the communication between the gateway and this process. It is compatible with Fortinet VPNs. | 37kB | 36kB | GPL-3.0-or-later OpenSSL | Lucian Cristian | Bug reports | Sources |
| network---vpn | libreswan | 4.12-1 | libc, librt, libpthread, kmod-ip6-vti, kmod-ipsec6, ip-full, iptables-mod-ipsec, kmod-crypto-aead, kmod-crypto-authenc, kmod-crypto-gcm, kmod-crypto-hash, kmod-crypto-rng, kmod-ip-vti, kmod-ipsec, kmod-ipsec4, kmod-ipt-ipsec, kmod-xfrm-interface, libevent2-7, libevent2-pthreads7, libldns, libunbound, nss-utils, nspr, libcap-ng | Libreswan is a free software implementation of the most widely supported and standardized VPN protocol based on (“IPsec”) and the Internet Key Exchange (“IKE”). These standards are produced and maintained by the Internet Engineering Task Force (“IETF”). Libreswan is a free software implementation of the most widely supported and standardized VPN protocol based on (“IPsec”) and the Internet Key Exchange (“IKE”). These standards are produced and maintained by the Internet Engineering Task Force (“IETF”). | 1059kB | 1063kB | GPL-2.0-or-later | Lucian Cristian | Bug reports | Sources |
| network---vpn | wireguard-tools | 1.0.20210424-3 | libc, kmod-wireguard | packages:pkgdata:wireguard-tools, WireGuard is a novel VPN that runs inside the Linux Kernel and utilizes state-of-the-art cryptography. It aims to be faster, simpler, leaner, and more useful than IPSec, while avoiding the massive headache. It intends to be considerably more performant than OpenVPN. WireGuard is designed as a general purpose VPN for running on embedded interfaces and super computers alike, fit for many different circumstances. It uses UDP. This package provides the userspace control program for WireGuard, `wg(8)`, a netifd protocol helper, and a re-resolve watchdog script. | 27kB | 26kB | GPL-2.0 | Jason A. Donenfeld | packages:pkgdata:wireguard-tools, Bug reports | packages:pkgdata:wireguard-tools, Sources |
| network---vpn | wireguard-tools | 1.0.20210424-3 | libc, kmod-wireguard | WireGuard is a novel VPN that runs inside the Linux Kernel and utilizes state-of-the-art cryptography. It aims to be faster, simpler, leaner, and more useful than IPSec, while avoiding the massive headache. It intends to be considerably more performant than OpenVPN. WireGuard is designed as a general purpose VPN for running on embedded interfaces and super computers alike, fit for many different circumstances. It uses UDP. This package provides the userspace control program for WireGuard, `wg(8)`, a netifd protocol helper, and a re-resolve watchdog script. | 27kB | 26kB | GPL-2.0 | Jason A. Donenfeld | Bug reports | Sources |
| network---vpn | tailscaled | 1.32.3-1 | libc, ca-bundle, kmod-tun | It creates a secure network between your servers, computers, and cloud instances. Even when separated by firewalls or subnets. | 6123kB | 6137kB | BSD-3-Clause | Jan Pavlinec | Bug reports | Sources |
| network---vpn | tailscale | 1.32.3-1 | libc, tailscaled | It creates a secure network between your servers, computers, and cloud instances. Even when separated by firewalls or subnets. | 3556kB | 3565kB | BSD-3-Clause | Jan Pavlinec | Bug reports | Sources |
| network---vpn | openvpn-nossl | 2.4.5-4.2 | libc, kmod-tun, liblzo | Open source VPN solution using plaintext (no SSL) | 86kB | 85kB | GPL-2.0 | Felix Fietkau | Bug reports | Sources |
| network---vpn | softethervpn-server | 4.38-9760-2 | libc, softethervpn-base | SoftEther VPN (“SoftEther” means “Software Ethernet”) is one of the world's most powerful and easy-to-use multi-protocol VPN software developed as an academic project from University of Tsukuba, Japan. SoftEther VPN has strong compatibility to today's most popular VPN products among the world. It has the interoperability with OpenVPN, L2TP, IPsec, EtherIP, L2TPv3, Cisco VPN Routers and MS-SSTP VPN Clients. SoftEther VPN is the world's only VPN software which supports SSL-VPN, OpenVPN, L2TP, EtherIP, L2TPv3 and IPsec as a single VPN software. SoftEther VPN is not only an alternative VPN server to existing VPN products (OpenVPN, IPsec and MS-SSTP), but has also original strong SSL-VPN protocol to penetrate any kinds of firewalls. Ultra-optimized SSL-VPN Protocol of SoftEther VPN has very fast throughput, low latency and firewall resistance. | 785kB | 785kB | GPL-2.0-or-later | Federico Di Marco | Bug reports | Sources |
| network---vpn | softethervpn-client | 4.38-9760-2 | libc, softethervpn-base | SoftEther VPN (“SoftEther” means “Software Ethernet”) is one of the world's most powerful and easy-to-use multi-protocol VPN software developed as an academic project from University of Tsukuba, Japan. SoftEther VPN has strong compatibility to today's most popular VPN products among the world. It has the interoperability with OpenVPN, L2TP, IPsec, EtherIP, L2TPv3, Cisco VPN Routers and MS-SSTP VPN Clients. SoftEther VPN is the world's only VPN software which supports SSL-VPN, OpenVPN, L2TP, EtherIP, L2TPv3 and IPsec as a single VPN software. SoftEther VPN is not only an alternative VPN server to existing VPN products (OpenVPN, IPsec and MS-SSTP), but has also original strong SSL-VPN protocol to penetrate any kinds of firewalls. Ultra-optimized SSL-VPN Protocol of SoftEther VPN has very fast throughput, low latency and firewall resistance. | 922kB | 922kB | GPL-2.0-or-later | Federico Di Marco | Bug reports | Sources |
| network---vpn | softethervpn-bridge | 4.38-9760-2 | libc, softethervpn-base | SoftEther VPN (“SoftEther” means “Software Ethernet”) is one of the world's most powerful and easy-to-use multi-protocol VPN software developed as an academic project from University of Tsukuba, Japan. SoftEther VPN has strong compatibility to today's most popular VPN products among the world. It has the interoperability with OpenVPN, L2TP, IPsec, EtherIP, L2TPv3, Cisco VPN Routers and MS-SSTP VPN Clients. SoftEther VPN is the world's only VPN software which supports SSL-VPN, OpenVPN, L2TP, EtherIP, L2TPv3 and IPsec as a single VPN software. SoftEther VPN is not only an alternative VPN server to existing VPN products (OpenVPN, IPsec and MS-SSTP), but has also original strong SSL-VPN protocol to penetrate any kinds of firewalls. Ultra-optimized SSL-VPN Protocol of SoftEther VPN has very fast throughput, low latency and firewall resistance. | 922kB | 922kB | GPL-2.0-or-later | Federico Di Marco | Bug reports | Sources |
| network---vpn | softethervpn-base | 4.38-9760-2 | libc, libpthread, librt, libreadline8, libopenssl1.1, libncurses6, kmod-tun, zlib | SoftEther VPN (“SoftEther” means “Software Ethernet”) is one of the world's most powerful and easy-to-use multi-protocol VPN software developed as an academic project from University of Tsukuba, Japan. SoftEther VPN has strong compatibility to today's most popular VPN products among the world. It has the interoperability with OpenVPN, L2TP, IPsec, EtherIP, L2TPv3, Cisco VPN Routers and MS-SSTP VPN Clients. SoftEther VPN is the world's only VPN software which supports SSL-VPN, OpenVPN, L2TP, EtherIP, L2TPv3 and IPsec as a single VPN software. SoftEther VPN is not only an alternative VPN server to existing VPN products (OpenVPN, IPsec and MS-SSTP), but has also original strong SSL-VPN protocol to penetrate any kinds of firewalls. Ultra-optimized SSL-VPN Protocol of SoftEther VPN has very fast throughput, low latency and firewall resistance. | 2742kB | 2742kB | GPL-2.0-or-later | Federico Di Marco | Bug reports | Sources |
| network---vpn | sstp-client | 1.0.15-1 | libc, libevent2-7, libopenssl1.1, ppp, resolveip | The advantage of SSTP compared to other vpn protocols like PPTP and L2TP is that it cannot be easily blocked by firewalls since the traffic is transmitted over HTTPS on port 443. This software has a similar commandline and configuration to the standard linux pptp-client software. Features: - Connect to Microsoft RAS network using SSTP - Use HTTPS with strong encryption over port 443 - Asynchronous HDLC frame support - Integration with pon/poff | 39kB | 38kB | GPL-2.0-or-later | Federico Di Marco | Bug reports | Sources |
| network---vpn | tinc | 1.1pre18-2 | libc, librt, libpthread, kmod-tun, liblzo2, libopenssl1.1, zlib | tinc is a Virtual Private Network (VPN) daemon that uses tunnelling and encryption to create a secure private network between hosts on the Internet. | 239kB | 238kB | GPL-2.0-or-later | Erwan Mas | Bug reports | Sources |
| network---vpn | vpnc | 2022-05-17-5c0ea6a3-1 | libc, libgpg-error, libgcrypt, kmod-tun, libgnutls, vpnc-scripts, resolveip | A VPN client compatible with Cisco's EasyVPN equipment. Supports IPSec (ESP) with Mode Configuration and Xauth. Supports only shared-secret IPSec authentication with Xauth, AES (256, 192, 128), 3DES, 1DES, MD5, SHA1, DH1/2/5/14/15/16/17/18 and IP tunneling. | 59kB | 58kB | GPL-3.0-or-later | Daniel Gimpelevich | Bug reports | Sources |
| network---vpn | uanytun | 0.3.7-2 | libc, librt, libpthread, kmod-tun, libgcrypt | uAnytun is a tiny implementation of SATP the secure anycast tunneling protocol. SATP defines a protocol used for communication between any combination of unicast and anycast tunnel endpoints. It has less protocol overhead than IPSec in Tunnel mode and allows tunneling of every ETHER TYPE protocol (e.g. ethernet, ip, arp ...). SATP directly includes cryptography and message authentication based on the methods used by SRTP. It is intended to deliver a generic, scalable and secure solution for tunneling and relaying of packets of any protocol. Unlike Anytun which is a full featured implementation uAnytun has no support for multiple connections or synchronisation. It is a small single threaded implementation intended to act as a client on small platforms. | 21kB | 20kB | GPL-3.0-or-later | Christian Pointner | Bug reports | Sources |
| Previous page Next page | ||||||||||