Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network---routing-and-redirection'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | ↑ Dosya boyutu | Yüklü boyut | Lisans | Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network---routing-and-redirection | quagga-zebra | 1.2.4-2 | libc, quagga, quagga-libzebra | Zebra daemon | 97kB | 96kB | GPL-2.0-or-later | Vasilis Tsiligiannis | Bug reports | Sources |
| network---routing-and-redirection | quagga-isisd | 1.2.4-2 | libc, quagga, quagga-libzebra | IS-IS routing engine | 97kB | 97kB | GPL-2.0-or-later | Vasilis Tsiligiannis | Bug reports | Sources |
| network---routing-and-redirection | quagga-ospf6d | 1.2.4-2 | libc, quagga, quagga-libospf | packages:pkgdata:quagga-ospf6d, OSPFv3 routing engine | 93kB | 92kB | GPL-2.0-or-later | Vasilis Tsiligiannis | packages:pkgdata:quagga-ospf6d, Bug reports | packages:pkgdata:quagga-ospf6d, Sources |
| network---routing-and-redirection | quagga-ospf6d | 1.2.4-2 | libc, quagga, quagga-libospf | OSPFv3 routing engine | 93kB | 92kB | GPL-2.0-or-later | Vasilis Tsiligiannis | Bug reports | Sources |
| network---routing-and-redirection | bird1c-ipv6 | 1.6.8-2 | libc, librt, libpthread, libreadline8, libncurses6, bird1-ipv6 | packages:pkgdata:bird1c-ipv6, BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. | 9kB | 8kB | GPL-2.0 | Álvaro Fernández Rojas | packages:pkgdata:bird1c-ipv6, Bug reports | packages:pkgdata:bird1c-ipv6, Sources |
| network---routing-and-redirection | bird1cl-ipv6 | 1.6.8-2 | libc, bird1-ipv6 | BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 9kB | 8kB | GPL-2.0 | Álvaro Fernández Rojas | Bug reports | Sources |
| network---routing-and-redirection | bird1c-ipv6 | 1.6.8-2 | libc, librt, libpthread, libreadline8, libncurses6, bird1-ipv6 | BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. | 9kB | 8kB | GPL-2.0 | Álvaro Fernández Rojas | Bug reports | Sources |
| network---routing-and-redirection | bmx7-uci-config | 7.1.1-4 | libc, bmx7, libuci20130104 | configuration plugin based on uci (recommended!) | 9kB | 8kB | GPL-2.0-or-later | Axel Neumann | Bug reports | Sources |
| network---routing-and-redirection | bmx6-uci-config | r2018051214-2 | libc, bmx6, libuci20130104 | configuration plugin based on uci (recommended!) | 9kB | 9kB | GPL-2.0 | Axel Neumann | Bug reports | Sources |
| network---routing-and-redirection | bmx6-table | r2018051214-2 | libc, bmx6 | bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels | 9kB | 9kB | GPL-2.0 | Axel Neumann | Bug reports | Sources |
| network---routing-and-redirection | birdc6 | 1.6.3-1 | libc, libreadline, libncurses, bird6 | BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. | 9kB | 8kB | GPL-2.0 | Álvaro Fernández Rojas | Bug reports | Sources |
| network---routing-and-redirection | bird1cl-ipv4 | 1.6.8-2 | libc, bird1-ipv4 | packages:pkgdata:bird1cl-ipv4, BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 8kB | 7kB | GPL-2.0 | Álvaro Fernández Rojas | packages:pkgdata:bird1cl-ipv4, Bug reports | packages:pkgdata:bird1cl-ipv4, Sources |
| network---routing-and-redirection | bird2cl | 2.13.1-1 | libc, bird2 | packages:pkgdata:bird2cl, BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 8kB | 7kB | GPL-2.0-or-later | Toke Høiland-Jørgensen | packages:pkgdata:bird2cl, Bug reports | packages:pkgdata:bird2cl, Sources |
| network---routing-and-redirection | bmx7-json | 7.1.1-4 | libc, bmx7, libjson-c5 | packages:pkgdata:bmx7-json, json plugin based on json-c | 8kB | 7kB | GPL-2.0-or-later | Axel Neumann | packages:pkgdata:bmx7-json, Bug reports | packages:pkgdata:bmx7-json, Sources |
| network---routing-and-redirection | genl | 5.15.0-4 | libc, libnl-tiny1, libmnl0 | packages:pkgdata:genl, General netlink utility frontend | 8kB | 7kB | GPL-2.0 | Russell Senior | packages:pkgdata:genl, Bug reports | packages:pkgdata:genl, Sources |
| network---routing-and-redirection | bird2cl | 2.13.1-1 | libc, bird2 | BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 8kB | 7kB | GPL-2.0-or-later | Toke Høiland-Jørgensen | Bug reports | Sources |
| network---routing-and-redirection | bird1cl-ipv4 | 1.6.8-2 | libc, bird1-ipv4 | BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 8kB | 7kB | GPL-2.0 | Álvaro Fernández Rojas | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird1-ipv6 | 0.3-5 | libc, luci-base, luci-compat, bird1-ipv6-uci | LuCI support for BIRD (v1.6) (IPv6) | 8kB | 7kB | GPL-3.0-or-later | Roger Pueyo Centelles | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird1-ipv4 | 0.3-5 | libc, luci-base, luci-compat, bird1-ipv4-uci | LuCI support for BIRD (v1.6) (IPv4) | 8kB | 7kB | GPL-3.0-or-later | Roger Pueyo Centelles | Bug reports | Sources |
| network---routing-and-redirection | olsrd-mod-p2pd | 2022-03-18-1e771b4d-3 | libc, olsrd | Peer to Peer Discovery plugin | 8kB | 8kB | BSD-3-Clause | Saverio Proto | Bug reports | Sources |
| network---routing-and-redirection | nstat | 5.15.0-4 | libc, librt, libpthread, libnl-tiny1, libmnl0 | Network statistics utility | 8kB | 7kB | GPL-2.0 | Russell Senior | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird6 | 0.3-1 | libc, bird6-uci, luci-base | bird6 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | luci-app-bird4 | 0.3-1 | libc, libssp, bird4-uci, luci-base | bird4 application for LuCI | 8kB | 7kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | genl | 5.15.0-4 | libc, libnl-tiny1, libmnl0 | General netlink utility frontend | 8kB | 7kB | GPL-2.0 | Russell Senior | Bug reports | Sources |
| network---routing-and-redirection | bmx7-json | 7.1.1-4 | libc, bmx7, libjson-c5 | json plugin based on json-c | 8kB | 7kB | GPL-2.0-or-later | Axel Neumann | Bug reports | Sources |
| network---routing-and-redirection | birdcl6 | 1.6.3-1 | libc, libssp, bird6 | BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 8kB | 7kB | GPL-2.0 | Álvaro Fernández Rojas | Bug reports | Sources |
| network---routing-and-redirection | birdcl4 | 1.6.3-1 | libc, bird4 | BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 8kB | 7kB | GPL-2.0 | Álvaro Fernández Rojas | Bug reports | Sources |
| network---routing-and-redirection | birdc4 | 1.6.3-1 | libc, libssp, libreadline, libncurses, bird4 | BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. | 8kB | 7kB | GPL-2.0 | Álvaro Fernández Rojas | Bug reports | Sources |
| network---routing-and-redirection | frr-bgpd | 8.2.0-1 | libc, frr, frr-libfrr | packages:pkgdata:frr-bgpd, bgpd routing engine | 721kB | 725kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | packages:pkgdata:frr-bgpd, Bug reports | packages:pkgdata:frr-bgpd, Sources |
| network---routing-and-redirection | frr-bgpd | 8.2.0-1 | libc, frr, frr-libfrr | bgpd routing engine | 721kB | 725kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | bird1-ipv4-uci | 0.3-5 | libc, libuci20130104, uci, bird1-ipv4 | The BIRD UCI module (v1.6) (IPv4) | 7kB | 6kB | GPL-3.0-or-later | Roger Pueyo Centelles | Bug reports | Sources |
| network---routing-and-redirection | bird4-uci | 0.3-1 | libc, bird4, libuci, uci | bird4 UCI integration module | 7kB | 6kB | GPL-3.0+ | Eloi Carbo | Bug reports | Sources |
| network---routing-and-redirection | babeld | 1.12.2-1 | libc, libubus20220601, libubox20220515 | packages:pkgdata:babeld, Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). | 68kB | 67kB | MIT | Gabriel Kerneis, Baptiste Jonglez, Nick Hainke, | packages:pkgdata:babeld, Bug reports | packages:pkgdata:babeld, Sources |
| network---routing-and-redirection | dcwapd | 1.1.0-4 | libc, libstdcpp6, kmod-macremapper, libdcwsocket, libdcwproto, mrmctl, libuci20130104 | packages:pkgdata:dcwapd, Implementation of the Dual-Channel WiFi AP daemon | 68kB | 67kB | Apache-2.0 | Carey Sonsino | packages:pkgdata:dcwapd, Bug reports | packages:pkgdata:dcwapd, Sources |
| network---routing-and-redirection | dcwapd | 1.1.0-4 | libc, libstdcpp6, kmod-macremapper, libdcwsocket, libdcwproto, mrmctl, libuci20130104 | Implementation of the Dual-Channel WiFi AP daemon | 68kB | 67kB | Apache-2.0 | Carey Sonsino | Bug reports | Sources |
| network---routing-and-redirection | babeld | 1.12.2-1 | libc, libubus20220601, libubox20220515 | Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). | 68kB | 67kB | MIT | Gabriel Kerneis, Baptiste Jonglez, Nick Hainke, | Bug reports | Sources |
| network---routing-and-redirection | frr-bfdd | 8.2.0-1 | libc, frr, frr-libfrr | packages:pkgdata:frr-bfdd, bfdd routing engine | 65kB | 65kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | packages:pkgdata:frr-bfdd, Bug reports | packages:pkgdata:frr-bfdd, Sources |
| network---routing-and-redirection | frr-bfdd | 8.2.0-1 | libc, frr, frr-libfrr | bfdd routing engine | 65kB | 65kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-ripd | 8.2.0-1 | libc, frr, frr-libfrr | packages:pkgdata:frr-ripd, ripd routing engine | 61kB | 63kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | packages:pkgdata:frr-ripd, Bug reports | packages:pkgdata:frr-ripd, Sources |
| network---routing-and-redirection | frr-ripd | 8.2.0-1 | libc, frr, frr-libfrr | ripd routing engine | 61kB | 63kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | olsrd-mod-pud | 2022-03-18-1e771b4d-3 | libc, olsrd, libgps29 | Position Update Distribution plugin | 61kB | 60kB | BSD-3-Clause | Saverio Proto | Bug reports | Sources |
| network---routing-and-redirection | frr-nhrpd | 8.2.0-1 | libc, frr, frr-libfrr, libcares | packages:pkgdata:frr-nhrpd, nhrpd routing engine | 60kB | 60kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | packages:pkgdata:frr-nhrpd, Bug reports | packages:pkgdata:frr-nhrpd, Sources |
| network---routing-and-redirection | frr-eigrpd | 8.2.0-1 | libc, frr, frr-libfrr | packages:pkgdata:frr-eigrpd, eigrpd routing engine | 60kB | 60kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | packages:pkgdata:frr-eigrpd, Bug reports | packages:pkgdata:frr-eigrpd, Sources |
| network---routing-and-redirection | frr-eigrpd | 8.2.0-1 | libc, frr, frr-libfrr | eigrpd routing engine | 60kB | 60kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-nhrpd | 8.2.0-1 | libc, frr, frr-libfrr, libcares | nhrpd routing engine | 60kB | 60kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | bmx7-sms | 7.1.1-4 | libc, bmx7 | packages:pkgdata:bmx7-sms, sms plugin | 6kB | 5kB | GPL-2.0-or-later | Axel Neumann | packages:pkgdata:bmx7-sms, Bug reports | packages:pkgdata:bmx7-sms, Sources |
| network---routing-and-redirection | dcstad | 1.1.0-1 | libc, librt, libpthread, libdcwsocket, libdcwproto | packages:pkgdata:dcstad, Implementation of the Dual-Channel WiFi client daemon | 6kB | 5kB | Apache-2.0 | Carey Sonsino | packages:pkgdata:dcstad, Bug reports | packages:pkgdata:dcstad, Sources |
| network---routing-and-redirection | udp-broadcast-relay-redux | 2021-04-05-67137293-1 | libc | This program listens for packets on a specified UDP broadcast port. When a packet is received, it sends that packet to all specified interfaces but the one it came from as though it originated from the original sender. The primary purpose of this is to allow games on machines on separated local networks (Ethernet, WLAN) that use udp broadcasts to find each other to do so. It also works on ppp links, so you can log in from windows boxes (e.g. using pptp) and play LAN-based games together. Currently, you have to care about upcoming or downgoing interfaces yourself. | 6kB | 5kB | GPL-2.0 | common packages maintainers | Bug reports | Sources |
| network---routing-and-redirection | dcstad | 1.1.0-1 | libc, librt, libpthread, libdcwsocket, libdcwproto | Implementation of the Dual-Channel WiFi client daemon | 6kB | 5kB | Apache-2.0 | Carey Sonsino | Bug reports | Sources |
| network---routing-and-redirection | bird1-ipv6-uci | 0.3-5 | libc, libuci20130104, uci, bird1-ipv6 | The BIRD UCI module (v1.6) (IPv6) | 6kB | 5kB | GPL-3.0-or-later | Roger Pueyo Centelles | Bug reports | Sources |
| Next page | ||||||||||