This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network'

SınıfAdVersiyonBağımlılıklar ...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
networkethtool-full5.16-1libc, librt, libpthread, libmnl0packages:pkgdata:ethtool-full, ethtool is a small utility for examining and tuning your ethernet-based
network interface

133kB132kBGPL-2.0Felix Fietkaupackages:pkgdata:ethtool-full, Bug reportspackages:pkgdata:ethtool-full, Sources
networkethtool-full5.16-1libc, librt, libpthread, libmnl0ethtool is a small utility for examining and tuning your ethernet-based
network interface

133kB132kBGPL-2.0Felix FietkauBug reportsSources
networkethtool5.16-1libc, librt, libpthreadethtool is a small utility for examining and tuning your ethernet-based
network interface

34kB33kBGPL-2.0Felix FietkauBug reportsSources
networkdnstop2018-05-22-a5a5d2e2-1libc, libpcap1, libncurses6packages:pkgdata:dnstop, dnstop is a libpcap application (like tcpdump) that displays various tables of DNS traffic on your network

26kB25kBNLPLKen Xupackages:pkgdata:dnstop, Bug reportspackages:pkgdata:dnstop, Sources
networkdnstop2018-05-22-a5a5d2e2-1libc, libpcap1, libncurses6dnstop is a libpcap application (like tcpdump) that displays various tables of DNS traffic on your network

26kB25kBNLPLKen XuBug reportsSources
networkdarkstat3.0.719-6libc, libpcap1, zlibpackages:pkgdata:darkstat, darkstat is a packet sniffer that runs as a background process on a cable/DSL
router, gathers all sorts of statistics about network usage, and serves them
over HTTP.

38kB37kBGPL-2.0 BSD-ISCJean-Michel Lacroixpackages:pkgdata:darkstat, Bug reportspackages:pkgdata:darkstat, Sources
networkdarkstat3.0.719-6libc, libpcap1, zlibdarkstat is a packet sniffer that runs as a background process on a cable/DSL
router, gathers all sorts of statistics about network usage, and serves them
over HTTP.

38kB37kBGPL-2.0 BSD-ISCJean-Michel LacroixBug reportsSources
networkncp1.2.4-1libcpackages:pkgdata:ncp, copy files over the network

19kB18kBFREEAndreas Shimokawapackages:pkgdata:ncp, Bug reportspackages:pkgdata:ncp, Sources
networkncp1.2.4-1libccopy files over the network

19kB18kBFREEAndreas ShimokawaBug reportsSources
networkwpan-tools0.7libc, librt, libpthread, libnl200cfg802154 interface configuration utility

14kB13kBOpenWrt teamBug reportsSources
networkiw5.16-1libc, libnl-tiny1packages:pkgdata:iw, cfg80211 interface configuration utility

48kB48kBGPL-2.0Felix Fietkaupackages:pkgdata:iw, Bug reportspackages:pkgdata:iw, Sources
networkiw5.16-1libc, libnl-tiny1cfg80211 interface configuration utility

48kB48kBGPL-2.0Felix FietkauBug reportsSources
networkiw-full5.16-1libc, libnl-tiny1packages:pkgdata:iw-full, cfg80211 interface configuration utility (full version)

84kB83kBGPL-2.0Felix Fietkaupackages:pkgdata:iw-full, Bug reportspackages:pkgdata:iw-full, Sources
networkiw-full5.16-1libc, libnl-tiny1cfg80211 interface configuration utility (full version)

84kB83kBGPL-2.0Felix FietkauBug reportsSources
networkbmon4.0-1libc, libncursesw6, libnl-core200, libnl-route200, confuse, terminfobmon is a portable bandwidth monitor
and rate estimator running on various
operating systems. It supports various
input methods for different architectures.

37kB37kBMITBaptiste JonglezBug reportsSources
networkbatctl-full2022.0-3libc, libnl-tiny1, librtpackages:pkgdata:batctl-full, batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2022.0 of the user space utility.
Subcommands for configuration, online and offline debugging are enabled.

48kB47kBGPL-2.0-only ISC MITSimon Wunderlichpackages:pkgdata:batctl-full, Bug reportspackages:pkgdata:batctl-full, Sources
networkbatctl-full2022.0-3libc, libnl-tiny1, librtbatctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2022.0 of the user space utility.
Subcommands for configuration, online and offline debugging are enabled.

48kB47kBGPL-2.0-only ISC MITSimon WunderlichBug reportsSources
networkbatctl-default2022.0-3libc, librt, libpthread, libnl-tiny1packages:pkgdata:batctl-default, batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2022.0 of the user space utility.
Standard subcommands for configuration and online debugging are enabled.

37kB36kBGPL-2.0-only ISC MITSimon Wunderlichpackages:pkgdata:batctl-default, Bug reportspackages:pkgdata:batctl-default, Sources
networkbatctl-default2022.0-3libc, librt, libpthread, libnl-tiny1batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2022.0 of the user space utility.
Standard subcommands for configuration and online debugging are enabled.

37kB36kBGPL-2.0-only ISC MITSimon WunderlichBug reportsSources
networkbatctl-tiny2022.0-3libc, libnl-tiny1, librtpackages:pkgdata:batctl-tiny, batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2022.0 of the user space utility.
Only configuration relevant subcommands are enabled.

16kB15kBGPL-2.0-only ISC MITSimon Wunderlichpackages:pkgdata:batctl-tiny, Bug reportspackages:pkgdata:batctl-tiny, Sources
networkbatctl-tiny2022.0-3libc, libnl-tiny1, librtbatctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2022.0 of the user space utility.
Only configuration relevant subcommands are enabled.

16kB15kBGPL-2.0-only ISC MITSimon WunderlichBug reportsSources
networkbatctl2018.1-1libc, kmod-batman-adv, libnl-tiny, librtbatctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2018.1 of the user space utility.

35kB34kBGPL-2.0Simon WunderlichBug reportsSources
networkbanip0.9.0-1libc, jshn, jsonfilter, firewall4, ca-bundle, logd, rpcd, rpcd-mod-rpcsysbanIP blocks IPs via named nftables Sets.
banIP supports many IP blocklist feeds and provides a log service to block suspicious IPs in realtime.
Please see https://github.com/openwrt/packages/blob/master/net/banip/files/README.md for further information.


20kB19kBGPL-3.0-or-laterDirk BrenkenBug reportsSources
networkalfred2022.0-4libc, libnl-tiny1, librtpackages:pkgdata:alfred, alfred is a user space daemon for distributing arbitrary local information
over the mesh/network in a decentralized fashion. This data can be anything
which appears to be useful - originally designed to replace the batman-adv
visualization (vis), you may distribute hostnames, phone books, administration
information, DNS information, the local weather forecast ...

alfred runs as daemon in the background of the system. A user may insert
information by using the alfred binary on the command line, or use special
programs to communicate with alfred (done via unix sockets). alfred then takes
care of distributing the local information to other alfred servers on other
nodes. This is done via IPv6 link-local multicast, and does not require any
configuration. A user can request data from alfred, and will receive the
information available from all alfred servers in the network.

25kB24kBGPL-2.0-only MITSimon Wunderlichpackages:pkgdata:alfred, Bug reportspackages:pkgdata:alfred, Sources
networkalfred2022.0-4libc, libnl-tiny1, librtalfred is a user space daemon for distributing arbitrary local information
over the mesh/network in a decentralized fashion. This data can be anything
which appears to be useful - originally designed to replace the batman-adv
visualization (vis), you may distribute hostnames, phone books, administration
information, DNS information, the local weather forecast ...

alfred runs as daemon in the background of the system. A user may insert
information by using the alfred binary on the command line, or use special
programs to communicate with alfred (done via unix sockets). alfred then takes
care of distributing the local information to other alfred servers on other
nodes. This is done via IPv6 link-local multicast, and does not require any
configuration. A user can request data from alfred, and will receive the
information available from all alfred servers in the network.

25kB24kBGPL-2.0-only MITSimon WunderlichBug reportsSources
networketherwake1.09-5libcpackages:pkgdata:etherwake, You can wake up WOL compliant Computers which have been powered down to
sleep mode or start WOL compliant Computers with a BIOS feature.
WOL is an abbreviation for Wake-on-LAN. It is a standard that allows you
to turn on a computer from another location over a network connection.
ether-wake also supports WOL passwords.

5kB5kBPeter Wagnerpackages:pkgdata:etherwake, Bug reportspackages:pkgdata:etherwake, Sources
networketherwake1.09-5libcYou can wake up WOL compliant Computers which have been powered down to
sleep mode or start WOL compliant Computers with a BIOS feature.
WOL is an abbreviation for Wake-on-LAN. It is a standard that allows you
to turn on a computer from another location over a network connection.
ether-wake also supports WOL passwords.

5kB5kBPeter WagnerBug reportsSources
networkspeedtestpp1.14-2libc, libcurl4, libopenssl1.1, libstdcpp6Yet another unofficial speedtest.net client cli interface

25kB25kBMITOskari RautaBug reportsSources
networkxray-example1.8.3-1libc, xray-coreXray, Penetrates Everything. It helps you to build your own computer network.
It secures your network connections and thus protects your privacy.

This includes example configuration files for xray-core.

1kB0kBMPL-2.0Tianling ShenBug reportsSources
networkxray-geodata1.4.5-1libc, xray-coreXray, Penetrates Everything. It helps you to build your own computer network.
It secures your network connections and thus protects your privacy.

This includes GEO datas used for xray-core.

2488kB3263kBMPL-2.0Tianling ShenBug reportsSources
networkxray-core1.8.3-1libc, ca-bundleXray, Penetrates Everything. It helps you to build your own computer network.
It secures your network connections and thus protects your privacy.

8252kB8276kBMPL-2.0Tianling ShenBug reportsSources
networkulogd-mod-xml2.0.7-6libc, ulogd, libnetfilter-acct, libnetfilter-conntrack3, libnetfilter-log1XML output plugin

3kB2kBGPL-2.0-onlyAlexandru ArdeleanBug reportsSources
networkxfrm4libc, kmod-xfrm-interfacepackages:pkgdata:xfrm, XFRM IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre Valentinpackages:pkgdata:xfrm, Bug reportspackages:pkgdata:xfrm, Sources
networkxfrm4libc, kmod-xfrm-interfaceXFRM IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre ValentinBug reportsSources
networkwakeonlan0.41-1libc, perl, perlbase-getopt, perlbase-net, perlbase-socketWith this package you can remotely wake up and power on machines which have
motherboards or network cards that support 'Wake-on-Lan' packets.
.
The tool allows you to wake up a single machine, or a group of machines.
.
You need the MAC addresses of machines to construct the WOL packets, but,
in contrast to 'etherwake', you do not need root privileges to use the
program itself as UDP packets are used.

3kB2kBArtistic-1.0-PerlNikil MehtaBug reportsSources
networkieee8021xclient3libcpackages:pkgdata:ieee8021xclient, Wired 802.1x client config support in /etc/config/network.

1kB1kBGPL-2.0-or-laterDavid Yangpackages:pkgdata:ieee8021xclient, Bug reportspackages:pkgdata:ieee8021xclient, Sources
networkieee8021xclient3libcWired 802.1x client config support in /etc/config/network.

1kB1kBGPL-2.0-or-laterDavid YangBug reportsSources
networkwg-installer-server-hotplug-olsrd28libc, wg-installer-serverWireGuard Installer (server)

1kB0kBNick HainkeBug reportsSources
networkwg-installer-server28libc, librt, libpthread, kmod-wireguard, wireguard-tools, owipcalc, rpcd, uhttpd, uhttpd-mod-ubus, coreutils-dirnameWireGuard Installer (server)

3kB2kBNick HainkeBug reportsSources
networkwg-installer-server-hotplug-babeld28libc, librt, libpthread, wg-installer-serverWireGuard Installer (server)

1kB0kBNick HainkeBug reportsSources
networkwg-installer-client28libc, librt, libpthread, kmod-wireguard, wireguard-tools, owipcalc, curlWireGuard Installer (client)

3kB2kBNick HainkeBug reportsSources
networkwpa-supplicant-mesh2018-04-09-fa617ee6-5libc, libssp, libnl-tiny, libopensslWPA Supplicant (with 802.11s and SAE)

331kB330kBBSD-3-ClauseFelix FietkauBug reportsSources
networkvxlan7libc, kmod-vxlanVirtual eXtensible LAN config support in /etc/config/network.

2kB1kBGPL-2.0Matthias SchifferBug reportsSources
networkvtiv63libc, librt, libpthread, kmod-ip6-vtiVirtual IPsec Tunnel Interface config support (IPv6) in /etc/config/network.

0kB0kBGPL-2.0Andre ValentinBug reportsSources
networkvtiv43libc, librt, libpthread, kmod-ip-vtiVirtual IPsec Tunnel Interface config support (IPv4) in /etc/config/network.

0kB0kBGPL-2.0Andre ValentinBug reportsSources
networkvti5libc, librt, libpthread, kmod-ip-vti, kmod-ip6-vtipackages:pkgdata:vti, Virtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre Valentinpackages:pkgdata:vti, Bug reportspackages:pkgdata:vti, Sources
networkvti5libc, librt, libpthread, kmod-ip-vti, kmod-ip6-vtiVirtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre ValentinBug reportsSources
networkvncrepeater0.14-2libc, libstdcpp6packages:pkgdata:vncrepeater, Viewer can be behind Nat router or directly connected to the internet
instead of forwarding serveral ports, you only need to forward 1 port.
If the PC that runs the Repeater has access to the local DNS server,
you can use your local DNS names instead of 10.10.10.12.
This could be handy when you have a dynamic DHCP server allocating
ip adresses for your PC.

20kB19kBGPL-2.0Jirka Spicakpackages:pkgdata:vncrepeater, Bug reportspackages:pkgdata:vncrepeater, Sources
networkvncrepeater0.14-2libc, libstdcpp6Viewer can be behind Nat router or directly connected to the internet
instead of forwarding serveral ports, you only need to forward 1 port.
If the PC that runs the Repeater has access to the local DNS server,
you can use your local DNS names instead of 10.10.10.12.
This could be handy when you have a dynamic DHCP server allocating
ip adresses for your PC.

20kB19kBGPL-2.0Jirka SpicakBug reportsSources
networkkeepalived2.2.7-6libc, librt, libpthread, libnl-genl200, libmagic, libkmod, libnftnl11, kmod-macvlan, libnl-route200, libnfnetlink0, libopenssl1.1, libip4tc2, libip6tc2, libxtables12, libipset13packages:pkgdata:keepalived, VRRP with failover and monitoring daemon for Linux Virtual Server (LVS) clusters.

506kB508kBGPL-2.0-or-laterBen Kelly,,packages:pkgdata:keepalived, Bug reportspackages:pkgdata:keepalived, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun