This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network'

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
networkdhcpcd7.2.2-1libcpackages:pkgdata:dhcpcd, DHCPv4, IPv6RS and DHCPv6 client with IPv4LL support
dhcpcd is a one stop network management daemon which includes
* RFC compliant DHCPv4 and DHCPv6 clients
* DHCPv6 Prefix Delegation support
* IPv4LL (aka ZeroConf) support
* ARP address conflict resolution
* Link carrier detection
* Wireless SSID profiles
* ARP ping profiles

127kB126kBBSD-2cMarko Ratkajpackages:pkgdata:dhcpcd, Bug reportspackages:pkgdata:dhcpcd, Sources
networkbwping2.5-1libcpackages:pkgdata:bwping, BWPing is a tool to measure bandwidth and response times between two
hosts using Internet Control Message Protocol (ICMP) echo request/echo
reply mechanism. It does not require any special software on the remote
host. The only requirement is the ability to respond on ICMP echo request
messages. BWPing supports both IPv4 and IPv6 networks.

8kB7kBBSD-2-ClauseOleg Derevenetzpackages:pkgdata:bwping, Bug reportspackages:pkgdata:bwping, Sources
networkbatctl-full2022.0-3libc, libnl-tiny1, librtpackages:pkgdata:batctl-full, batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2022.0 of the user space utility.
Subcommands for configuration, online and offline debugging are enabled.

48kB47kBGPL-2.0-only ISC MITSimon Wunderlichpackages:pkgdata:batctl-full, Bug reportspackages:pkgdata:batctl-full, Sources
networkbatctl-default2022.0-3libc, librt, libpthread, libnl-tiny1packages:pkgdata:batctl-default, batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2022.0 of the user space utility.
Standard subcommands for configuration and online debugging are enabled.

37kB36kBGPL-2.0-only ISC MITSimon Wunderlichpackages:pkgdata:batctl-default, Bug reportspackages:pkgdata:batctl-default, Sources
networkgnunet-transport-http_client0.17.5-4libc, gnunet, gnunet-curl, ca-bundlepackages:pkgdata:gnunet-transport-http_client, GNUnet HTTP/HTTPS client transport

28kB28kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-transport-http_client, Bug reportspackages:pkgdata:gnunet-transport-http_client, Sources
networketherwake1.09-5libcpackages:pkgdata:etherwake, You can wake up WOL compliant Computers which have been powered down to
sleep mode or start WOL compliant Computers with a BIOS feature.
WOL is an abbreviation for Wake-on-LAN. It is a standard that allows you
to turn on a computer from another location over a network connection.
ether-wake also supports WOL passwords.

5kB5kBPeter Wagnerpackages:pkgdata:etherwake, Bug reportspackages:pkgdata:etherwake, Sources
networkfoolsm1.0.13-2libc, msmtppackages:pkgdata:foolsm, foolsm is a link state monitor for carrying out actions when a link
transistions from the up to down state or vice versa.

30kB29kBGPL-2.0-onlycommon packages maintainerspackages:pkgdata:foolsm, Bug reportspackages:pkgdata:foolsm, Sources
networkethtool-full5.16-1libc, librt, libpthread, libmnl0packages:pkgdata:ethtool-full, ethtool is a small utility for examining and tuning your ethernet-based
network interface

133kB132kBGPL-2.0Felix Fietkaupackages:pkgdata:ethtool-full, Bug reportspackages:pkgdata:ethtool-full, Sources
networkfail2ban-src0.11.2-8libc, librt, libpthreadpackages:pkgdata:fail2ban-src, Fail2Ban scans log files like /var/log/auth.log and bans IP addresses conducting too many failed login attempts.

This package contains the Python source files for fail2ban.

144kB143kBGPL-2.0-or-laterGerald Kermapackages:pkgdata:fail2ban-src, Bug reportspackages:pkgdata:fail2ban-src, Sources
networkdnstop2018-05-22-a5a5d2e2-1libc, libpcap1, libncurses6packages:pkgdata:dnstop, dnstop is a libpcap application (like tcpdump) that displays various tables of DNS traffic on your network

26kB25kBNLPLKen Xupackages:pkgdata:dnstop, Bug reportspackages:pkgdata:dnstop, Sources
networkdnstap0.4.0-1libcpackages:pkgdata:dnstap, The dnstap command-line tool can read, write, and decode
dnstap data from a running name server or a previously-saved file.

2281kB2287kBApache-2.0Jan Pavlinecpackages:pkgdata:dnstap, Bug reportspackages:pkgdata:dnstap, Sources
networknut-common2.7.4-27libc, librt, libpthread, nut, libusb-compat4, libneonpackages:pkgdata:nut-common, Network UPS Tools (NUT) is a client/server monitoring system that
allows computers to share uninterruptible power supply (UPS) and
power distribution unit (PDU) hardware. Clients access the hardware
through the server, and are notified whenever the power status
changes.
This package contains the common files.

15kB14kBGPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perlcommon packages maintainerspackages:pkgdata:nut-common, Bug reportspackages:pkgdata:nut-common, Sources
networkremserial1.4-2libcpackages:pkgdata:remserial, Bridge TCP/IP port with a device

6kB5kBGPL-2.0-or-laterNuno Goncalvespackages:pkgdata:remserial, Bug reportspackages:pkgdata:remserial, Sources
networkuclient-fetch2023-04-13-007d9454-1libc, libuclient20201210packages:pkgdata:uclient-fetch, Tiny wget replacement using libuclient

8kB7kBISCFelix Fietkaupackages:pkgdata:uclient-fetch, Bug reportspackages:pkgdata:uclient-fetch, Sources
networkdaemonlogger1.2.1-1libc, libpcap1, libdnetpackages:pkgdata:daemonlogger, Software Network Tap

10kB10kBGPL-2.0Mirko Vogtpackages:pkgdata:daemonlogger, Bug reportspackages:pkgdata:daemonlogger, Sources
networkcrowdsec1.5.4-1libcpackages:pkgdata:crowdsec, Crowdsec - An open-source, lightweight agent to detect
and respond to bad behaviours.
It also automatically benefits from a global
community-wide IP reputation database.

This package contains the main program.

54784kB54900kBMITGerald Kermapackages:pkgdata:crowdsec, Bug reportspackages:pkgdata:crowdsec, Sources
networkcifsmount6.11-2libc, kmod-fs-cifspackages:pkgdata:cifsmount, CIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:cifsmount, Bug reportspackages:pkgdata:cifsmount, Sources
networkgnunet-pgsql0.17.5-4libc, gnunet, libpq, pgsql-serverpackages:pkgdata:gnunet-pgsql, GNUnet PostgreSQL backend

18kB17kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-pgsql, Bug reportspackages:pkgdata:gnunet-pgsql, Sources
networkcshark2020-07-22-c0d32fb6-2libc, libjson-c5, libpcap1, libuci20130104, libubox20220515, libuclient20201210, libustream-mbedtls20201210packages:pkgdata:cshark, CloudShark capture tool

8kB7kBBSD-2-ClauseLuka Perkovpackages:pkgdata:cshark, Bug reportspackages:pkgdata:cshark, Sources
networkgnunet-fs0.17.5-4libc, gnunet, gnunet-datastore, libextractorpackages:pkgdata:gnunet-fs, GNUnet file-sharing components

154kB153kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-fs, Bug reportspackages:pkgdata:gnunet-fs, Sources
networkgnunet-fs-pgsql0.17.5-4libc, gnunet, gnunet-pgsql, gnunet-datastorepackages:pkgdata:gnunet-fs-pgsql, GNUnet PostgreSQL filesharing plugin

7kB6kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-fs-pgsql, Bug reportspackages:pkgdata:gnunet-fs-pgsql, Sources
networkgnunet-fs-mysql0.17.5-4libc, gnunet, gnunet-mysql, gnunet-datastorepackages:pkgdata:gnunet-fs-mysql, GNUnet mySQL filesharing plugins

7kB6kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-fs-mysql, Bug reportspackages:pkgdata:gnunet-fs-mysql, Sources
networkgnunet-fs-heap0.17.5-4libc, gnunet, gnunet-datastorepackages:pkgdata:gnunet-fs-heap, GNUnet heap-based filesharing plugin

5kB4kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-fs-heap, Bug reportspackages:pkgdata:gnunet-fs-heap, Sources
networkgnunet-dhtcache-sqlite0.17.5-4libc, gnunet, gnunet-sqlitepackages:pkgdata:gnunet-dhtcache-sqlite, GNUnet libsqlite3 dhtcache plugin

8kB7kBAGPL-3.0Daniel Gollepackages:pkgdata:gnunet-dhtcache-sqlite, Bug reportspackages:pkgdata:gnunet-dhtcache-sqlite, Sources
networkbwm-ng0.6.3-1libcpackages:pkgdata:bwm-ng, Bandwidth Monitor NG is a small and simple console-based live
network and disk io bandwidth monitor.

11kB10kBGPL2-2.0Julen Landa Alustizapackages:pkgdata:bwm-ng, Bug reportspackages:pkgdata:bwm-ng, Sources
networknetcat0.7.1-2libc, librt, libpthreadpackages:pkgdata:netcat, Netcat is a featured networking utility which reads and writes data across network connections, using the TCP/IP protocol.
It is designed to be a reliable “back-end” tool that can be used directly or easily driven by other programs and scripts. At the same time, it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities.

14kB13kBGPL-2.0Adam Genslerpackages:pkgdata:netcat, Bug reportspackages:pkgdata:netcat, Sources
networknet-tools-route2.10-1libc, librt, libpthreadpackages:pkgdata:net-tools-route, Replace busybox version of the route command with the full net-tools
version. This is normally not needed as busybox is smaller and provides
sufficient functionality, but some users may want or need the full
functionality of the net-tools variant (e.g. AF_X25).

18kB17kBGPL-2.0-or-laterStijn Segerspackages:pkgdata:net-tools-route, Bug reportspackages:pkgdata:net-tools-route, Sources
networkiperf2.1.3-1libc, libstdcpp6, libpthreadpackages:pkgdata:iperf, Iperf is a modern alternative for measuring TCP and UDP bandwidth
performance, allowing the tuning of various parameters and
characteristics.

79kB78kBBSD-3-ClauseFelix Fietkaupackages:pkgdata:iperf, Bug reportspackages:pkgdata:iperf, Sources
networkgolang-gitlab-yawning-obfs4-dev0.0.14-1libcpackages:pkgdata:golang-gitlab-yawning-obfs4-dev, obfs4proxy is a tool that attempts to circumvent censorship by
transforming the Tor traffic between the client and the bridge. This way
censors, who usually monitor traffic between the client and the bridge,
will see innocent-looking transformed traffic instead of the actual Tor
traffic.

obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4.

It is written in Go and is compliant with the Tor pluggable transports
specification, and its modular architecture allows it to support
multiple pluggable transports.

This package provides the source files for the client/bridge program.

65kB64kBBSD-2-Clause GPL-3.0-or-laterJeffery Topackages:pkgdata:golang-gitlab-yawning-obfs4-dev, Bug reportspackages:pkgdata:golang-gitlab-yawning-obfs4-dev, Sources
networkjool-tools-netfilter2022-01-20-3libc, libnl200, kmod-jool-netfilterpackages:pkgdata:jool-tools-netfilter, Jool is an Open Source SIIT and NAT64 for Linux.

This package provides the userspace control programs for Jool.

127kB126kBGPL-2.0-onlycommon packages maintainerspackages:pkgdata:jool-tools-netfilter, Bug reportspackages:pkgdata:jool-tools-netfilter, Sources
networkbpftool-full2022-03-08-04c465fd-1libc, librt, libpthread, libelf1, libbfd, libopcodespackages:pkgdata:bpftool-full, A tool for inspection and simple manipulation of eBPF programs and maps.
This full version uses libbfd and libopcodes to support disassembly of
eBPF programs and jited code.

132kB131kBGPL-2.0-only OR BSD-2-ClauseTony Ambardarpackages:pkgdata:bpftool-full, Bug reportspackages:pkgdata:bpftool-full, Sources
networkboinc7.16.16-1libc, curl, bzip2, libstdcpp6, libopenssl1.1, zlibpackages:pkgdata:boinc, The Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC core client program that is
required to participate in any project that uses BOINC to control what
projects to join and to determine constraints for the computation
like the percentage of CPU time. OpenWrt does not
provide the graphical BOINC Manager, but you can connect to this
machine from the BOINC Manager of your desktop computer.

759kB759kBGPL-3.0-or-laterChristian Dreihsig, Steffen Moeller,packages:pkgdata:boinc, Bug reportspackages:pkgdata:boinc, Sources
networkboinc-wrapper26018-1libc, libstdcpp6packages:pkgdata:boinc-wrapper, The Berkeley Open Infrastructure for Network Computing (BOINC) is a
software platform for distributed computing: several initiatives of
various scientific disciplines all compete for the idle time of
desktop computers. The developers' web site at the University of
Berkeley serves as a common portal to the otherwise independently run
projects.

This package provides the BOINC wrapper that runs the Project applications as
subprocesses, and handles all communication with the BOINC client
(e.g., to report CPU time and fraction done).

339kB338kBGPL-3.0-or-laterVitalii Koshurapackages:pkgdata:boinc-wrapper, Bug reportspackages:pkgdata:boinc-wrapper, Sources
networkapinger-rrd2015-04-09-78eb3287-3libc, librt, libpthread, apinger, rrdtool1, rrdcgi1packages:pkgdata:apinger-rrd, Generate RRD Graphs from Apinger Data

1kB0kBGPL-2.0-onlyAlex Samorukovpackages:pkgdata:apinger-rrd, Bug reportspackages:pkgdata:apinger-rrd, Sources
networkola0.10.8-4libc, protobuf, libftdi1, libusb-1.0-0, libuuid1, libstdcpp6, libpthread, librt, zlib, libncurses6, liblo, libmicrohttpdpackages:pkgdata:ola, OLA (Open Lighting Architecture) is a framework that allows applications to
send and receive DMX512, using various hardware devices and 'DMX over IP'
protocols. It enables software controllers talk to DMX hardware.

1919kB1923kBLGPL-2.1-or-laterChristian Beierpackages:pkgdata:ola, Bug reportspackages:pkgdata:ola, Sources
networkiw5.16-1libc, libnl-tiny1packages:pkgdata:iw, cfg80211 interface configuration utility

48kB48kBGPL-2.0Felix Fietkaupackages:pkgdata:iw, Bug reportspackages:pkgdata:iw, Sources
networktor-resolve0.4.7.10-1libc, tor-basicpackages:pkgdata:tor-resolve, Tor is a toolset for a wide range of organizations and people that want to
improve their safety and security on the Internet. Using Tor can help you
anonymize web browsing and publishing, instant messaging, IRC, SSH, and
more. Tor also provides a platform on which software developers can build
new applications with built-in anonymity, safety, and privacy features.

Resolve a hostname to an IP address via tor.


64kB63kBHauke Mehrtens,,packages:pkgdata:tor-resolve, Bug reportspackages:pkgdata:tor-resolve, Sources
networkahcpd0.53-3libc, ip, librtpackages:pkgdata:ahcpd, Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
Configuration Protocol (AHCP). AHCP is designed for wireless mesh
networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
also be used on wired networks.

23kB22kBMITGabriel Kerneispackages:pkgdata:ahcpd, Bug reportspackages:pkgdata:ahcpd, Sources
networkadguardhome0.107.21-1libc, ca-bundlepackages:pkgdata:adguardhome, Free and open source, powerful network-wide ads and trackers blocking DNS server.

10899kB10920kBGPL-3.0-onlyDobroslaw Kijowskipackages:pkgdata:adguardhome, Bug reportspackages:pkgdata:adguardhome, Sources
networkaddrwatch1.0.2-3libc, libpcap1, libevent2-7packages:pkgdata:addrwatch, This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the main addrwatch program.

24kB23kBGPL-3.0-or-laterOndrej Caletkapackages:pkgdata:addrwatch, Bug reportspackages:pkgdata:addrwatch, Sources
networkaddrwatch-syslog1.0.2-3libc, addrwatchpackages:pkgdata:addrwatch-syslog, This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the syslog output module.

3kB2kBGPL-3.0-or-laterOndrej Caletkapackages:pkgdata:addrwatch-syslog, Bug reportspackages:pkgdata:addrwatch-syslog, Sources
networkaddrwatch-stdout1.0.2-3libc, addrwatchpackages:pkgdata:addrwatch-stdout, This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the stdout output module.

2kB1kBGPL-3.0-or-laterOndrej Caletkapackages:pkgdata:addrwatch-stdout, Bug reportspackages:pkgdata:addrwatch-stdout, Sources
networkaddrwatch-mysql1.0.2-3libc, addrwatch, libmariadb3packages:pkgdata:addrwatch-mysql, This is a tool similar to arpwatch. It main purpose is to monitor network and
log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks
with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6
addresses of hosts using IPv6 privacy extensions (RFC4941).

This contains the MySQL output module.

16kB15kBGPL-3.0-or-laterOndrej Caletkapackages:pkgdata:addrwatch-mysql, Bug reportspackages:pkgdata:addrwatch-mysql, Sources
networkadblock4.1.5-8libc, jshn, jsonfilter, coreutils, coreutils-sort, ca-bundle, opkgpackages:pkgdata:adblock, Powerful adblock solution to block ad/abuse domains via dnsmasq, unbound, named or kresd.
The script supports many domain blacklist sites plus manual black- and whitelist overrides.
Please see https://github.com/openwrt/packages/blob/master/net/adblock/files/README.md for further information.


20kB19kBGPL-3.0-or-laterDirk Brenkenpackages:pkgdata:adblock, Bug reportspackages:pkgdata:adblock, Sources
networkacme3.0.6-3libc, wget-ssl, ca-bundle, openssl-util, socatpackages:pkgdata:acme, A client for issuing Letsencrypt certificates.

54kB53kBGPL-3.0-onlyToke Høiland-Jørgensenpackages:pkgdata:acme, Bug reportspackages:pkgdata:acme, Sources
networkacme-dnsapi3.0.6-3libc, acmepackages:pkgdata:acme-dnsapi, This package provides DNS API integration for ACME (Letsencrypt) client.

149kB148kBGPL-3.0-onlyToke Høiland-Jørgensenpackages:pkgdata:acme-dnsapi, Bug reportspackages:pkgdata:acme-dnsapi, Sources
networkhttps-dns-proxy2023-10-25-4libc, librt, libpthread, libcares, libcurl4, libev, ca-bundle, jsonfilterpackages:pkgdata:https-dns-proxy, Light-weight DNS-over-HTTPS, non-caching translation proxy for the RFC 8484 DoH standard.
It receives regular (UDP) DNS requests and resolves them via DoH resolver.
Please see https://docs.openwrt.melmac.net/https-dns-proxy/ for more information.

20kB19kBMITStan Grishinpackages:pkgdata:https-dns-proxy, Bug reportspackages:pkgdata:https-dns-proxy, Sources
network464xlat13libc, kmod-nat46, ippackages:pkgdata:464xlat, 464xlat provides support to deploy limited IPv4 access services to mobile
and wireline IPv6-only edge networks without encapsulation (RFC6877)

5kB4kBGPL-2.0Hans Dedeckerpackages:pkgdata:464xlat, Bug reportspackages:pkgdata:464xlat, Sources
network6to413libc, kmod-sitpackages:pkgdata:6to4, Provides support for 6to4 tunnels in /etc/config/network.
Refer to https://openwrt.org/docs/guide-user/base-system/basic-networking
configuration details.

1kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:6to4, Bug reportspackages:pkgdata:6to4, Sources
network6rd12libc, librt, libpthread, kmod-sitpackages:pkgdata:6rd, Provides support for 6rd tunnels in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

4kB3kBGPL-2.0Steven Barthpackages:pkgdata:6rd, Bug reportspackages:pkgdata:6rd, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun