This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network---routing-and-redirection'

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcı Hata raporuKaynak kod
network---routing-and-redirectionbfdd2019-08-22-c54534be-4libc, libevent2-7, libjson-c5A port of Cumulus BFD daemon to a more portable daemon.

Bidirectional Forwarding Detection (BFD) is a network protocol that is used to
detect faults between two forwarding engines connected by a link. It provides
low-overhead detection of faults even on physical media that doesn't support
failure detection of any kind, such as Ethernet, virtual circuits, tunnels and
MPLS Label Switched Paths.

27kB26kBGPL-2.0-or-laterLucian CristianBug reportsSources
network---routing-and-redirectiondcstad1.1.0-1libc, librt, libpthread, libdcwsocket, libdcwprotoImplementation of the Dual-Channel WiFi client daemon

6kB5kBApache-2.0Carey SonsinoBug reportsSources
network---routing-and-redirectionfrr-libfrr8.2.0-1libc, frr, librt, libatomic1, libcap, libjson-c5, libyangzebra library

474kB482kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-nhrpd8.2.0-1libc, frr, frr-libfrr, libcaresnhrpd routing engine

60kB60kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-ospfd8.2.0-1libc, frr, frr-libfrrospfd routing engine

330kB333kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionfrr-babeld8.2.0-1libc, frr, frr-libfrrbabeld routing engine

55kB55kBGPL-2.0-only LGPL-2.1-onlyLucian CristianBug reportsSources
network---routing-and-redirectionyggdrasil0.4.3-1libc, kmod-tun, dkjson, libuci-luaYggdrasil builds end-to-end encrypted networks with IPv6.
Beyond the similarities with cjdns is a different routing
algorithm. This globally-agreed spanning tree uses greedy
routing in a metric space. Back-pressure routing techniques
allow advanced link aggregation bonding on per-stream basis.
In turn, a single stream will span across multiple network
interfaces simultaneously with much greater throughput.

3000kB3005kBLGPL-3.0-onlyWilliam FleurantBug reportsSources
network---routing-and-redirectiontcpproxy1.2-4libctcpproxy is a simple tcp connection proxy which combines the features of rinetd and 6tunnel.
tcpproxy supports IPv4 and IPv6 and also supports connections from IPv6 to IPv4 endpoints and vice versa.

19kB18kBGPL-3.0-or-laterChristian PointnerBug reportsSources
network---routing-and-redirectionsslhv1.22c-1libc, libconfig11, libcap, libpcre2SSL/SSH multiplexer

36kB35kBGPL-2.0-or-laterJonathan McCrohanBug reportsSources
network---routing-and-redirectionsmcroute2.5.5-1libcSMCRoute is a command line tool to manipulate the multicast routes of the Linux kernel.

29kB29kBGPL-2.0-or-laterMoritz WarningBug reportsSources
network---routing-and-redirectionmwan32.11.7-1libc, ip, ipset, iptables, ip6tables, iptables-mod-conntrack-extra, iptables-mod-ipopt, jshnHotplug script which makes configuration of multiple WAN interfaces simple
and manageable. With loadbalancing/failover support for up to 250 wan
interfaces, connection tracking and an easy to manage traffic ruleset.

22kB21kBGPL-2.0Florian EckertBug reportsSources
network---routing-and-redirectionigmpproxy0.4-1libcIGMPproxy is a simple dynamic Multicast Routing Daemon using
only IGMP signalling (Internet Group Management Protocol).

19kB18kBGPL-2.0+Felix FietkauBug reportsSources
network---routing-and-redirectionbcp385-11libcbcp38 implements IETF BCP38 for home routers.
See https://tools.ietf.org/html/bcp38.

This package provides BCP38 for IPv4 only - IPv6 uses source
specific default routes, so no firewall configuration is needed.

3kB2kBToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird2c2.13.1-1libc, bird2, libreadline8, libncurses6packages:pkgdata:bird2c, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.

10kB9kBGPL-2.0-or-laterToke Høiland-Jørgensenpackages:pkgdata:bird2c, Bug reportspackages:pkgdata:bird2c, Sources
network---routing-and-redirectionbird1cl-ipv41.6.8-2libc, bird1-ipv4packages:pkgdata:bird1cl-ipv4, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


8kB7kBGPL-2.0Álvaro Fernández Rojaspackages:pkgdata:bird1cl-ipv4, Bug reportspackages:pkgdata:bird1cl-ipv4, Sources
network---routing-and-redirectionbird1c-ipv61.6.8-2libc, librt, libpthread, libreadline8, libncurses6, bird1-ipv6packages:pkgdata:bird1c-ipv6, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


9kB8kBGPL-2.0Álvaro Fernández Rojaspackages:pkgdata:bird1c-ipv6, Bug reportspackages:pkgdata:bird1c-ipv6, Sources
network---routing-and-redirectionquagga-ripngd1.2.4-2libc, quagga, quagga-libzebrapackages:pkgdata:quagga-ripngd, RIPNG routing engine

32kB31kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga-ripngd, Bug reportspackages:pkgdata:quagga-ripngd, Sources
network---routing-and-redirectionquagga-ospf6d1.2.4-2libc, quagga, quagga-libospfpackages:pkgdata:quagga-ospf6d, OSPFv3 routing engine

93kB92kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga-ospf6d, Bug reportspackages:pkgdata:quagga-ospf6d, Sources
network---routing-and-redirectionquagga-libospf1.2.4-2libc, quagga, quagga-libzebrapackages:pkgdata:quagga-libospf, OSPF library

196kB197kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga-libospf, Bug reportspackages:pkgdata:quagga-libospf, Sources
network---routing-and-redirectionbmx77.1.1-4libc, zlib, libmbedtls12, libiwinfo20210430packages:pkgdata:bmx7, BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

176kB175kBGPL-2.0-or-laterAxel Neumannpackages:pkgdata:bmx7, Bug reportspackages:pkgdata:bmx7, Sources
network---routing-and-redirectionbird2cl2.13.1-1libc, bird2packages:pkgdata:bird2cl, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD lightweight command-line client. It is used to send commands
to BIRD, commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

8kB7kBGPL-2.0-or-laterToke Høiland-Jørgensenpackages:pkgdata:bird2cl, Bug reportspackages:pkgdata:bird2cl, Sources
network---routing-and-redirectionbmx7-topology7.1.1-4libc, bmx7packages:pkgdata:bmx7-topology, topology plugin

5kB4kBGPL-2.0-or-laterAxel Neumannpackages:pkgdata:bmx7-topology, Bug reportspackages:pkgdata:bmx7-topology, Sources
network---routing-and-redirectionbmx7-table7.1.1-4libc, bmx7, bmx7-tunpackages:pkgdata:bmx7-table, plugin to announce routes from tables via tunnels

10kB9kBGPL-2.0-or-laterAxel Neumannpackages:pkgdata:bmx7-table, Bug reportspackages:pkgdata:bmx7-table, Sources
network---routing-and-redirectionbmx7-sms7.1.1-4libc, bmx7packages:pkgdata:bmx7-sms, sms plugin

6kB5kBGPL-2.0-or-laterAxel Neumannpackages:pkgdata:bmx7-sms, Bug reportspackages:pkgdata:bmx7-sms, Sources
network---routing-and-redirectionbmx7-json7.1.1-4libc, bmx7, libjson-c5packages:pkgdata:bmx7-json, json plugin based on json-c

8kB7kBGPL-2.0-or-laterAxel Neumannpackages:pkgdata:bmx7-json, Bug reportspackages:pkgdata:bmx7-json, Sources
network---routing-and-redirectionbird22.13.1-1libc, libpthreadpackages:pkgdata:bird2, BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
OSPFv3, RIPng, Babel and BGP protocols for IPv6.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.

This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
into a single branch, and also adds support for the Babel routing protocol.

349kB349kBGPL-2.0-or-laterToke Høiland-Jørgensenpackages:pkgdata:bird2, Bug reportspackages:pkgdata:bird2, Sources
network---routing-and-redirectionbatmand1440-1libc, libpthread, kmod-tunpackages:pkgdata:batmand, B.A.T.M.A.N. layer 3 routing daemon

41kB41kBGPL-2.0Corinna "Elektra" Aichelepackages:pkgdata:batmand, Bug reportspackages:pkgdata:batmand, Sources
network---routing-and-redirectionbabeld1.12.2-1libc, libubus20220601, libubox20220515packages:pkgdata:babeld, Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
with fast convergence properties. It is based on the ideas in DSDV, AODV and
Cisco's EIGRP, but is designed to work well not only in wired networks but
also in wireless mesh networks, and has been extended with support for
overlay networks. Babel is an IETF standard protocol (RFC 8966).

68kB67kBMITGabriel Kerneis, Baptiste Jonglez, Nick Hainke,packages:pkgdata:babeld, Bug reportspackages:pkgdata:babeld, Sources
network---routing-and-redirectionbabel-pinger0.1-1libc, librtpackages:pkgdata:babel-pinger, Babel-pinger is a hack to export a default route into Babel for people
using DHCP to configure their routers rather than speaking to their
upstream provider with a proper routing protocol.

4kB3kBGabriel Kerneispackages:pkgdata:babel-pinger, Bug reportspackages:pkgdata:babel-pinger, Sources
network---routing-and-redirectionquagga-watchquagga1.2.4-2libc, quagga, quagga-libzebrapackages:pkgdata:quagga-watchquagga, Quagga watchdog

12kB11kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga-watchquagga, Bug reportspackages:pkgdata:quagga-watchquagga, Sources
network---routing-and-redirectioncjdnsv21.1-4libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2packages:pkgdata:cjdns, Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

393kB392kBGPL-3.0-or-laterWilliam Fleurantpackages:pkgdata:cjdns, Bug reportspackages:pkgdata:cjdns, Sources
network---routing-and-redirectioncjdns-testsv21.1-4libc, libpthread, librtpackages:pkgdata:cjdns-tests, cjdns test cases

332kB332kBGPL-3.0-or-laterWilliam Fleurantpackages:pkgdata:cjdns-tests, Bug reportspackages:pkgdata:cjdns-tests, Sources
network---routing-and-redirectionquagga1.2.4-2libc, librt, libpthreadpackages:pkgdata:quagga, A routing software package that provides TCP/IP based routing services
with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
OSPFv3, BGP-4, and BGP-4+

3kB2kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga, Bug reportspackages:pkgdata:quagga, Sources
network---routing-and-redirectionolsrd-utils2022-03-18-1e771b4d-3libc, librt, libpthread, olsrdUtils for OLSRD

1kB1kBBSD-3-ClauseSaverio ProtoBug reportsSources
network---routing-and-redirectionolsrd-mod-filtergw2022-03-18-1e771b4d-3libc, olsrdFilter Gateway plugin

3kB2kBBSD-3-ClauseSaverio ProtoBug reportsSources
network---routing-and-redirectionbird2cl2.13.1-1libc, bird2BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD lightweight command-line client. It is used to send commands
to BIRD, commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

8kB7kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird2c2.13.1-1libc, bird2, libreadline8, libncurses6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.

10kB9kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird22.13.1-1libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.


BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
OSPFv3, RIPng, Babel and BGP protocols for IPv6.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.

This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
into a single branch, and also adds support for the Babel routing protocol.

349kB349kBGPL-2.0-or-laterToke Høiland-JørgensenBug reportsSources
network---routing-and-redirectionbird1cl-ipv41.6.8-2libc, bird1-ipv4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


8kB7kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1c-ipv41.6.8-2libc, libreadline8, libncurses6, bird1-ipv4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


10kB9kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1-ipv41.6.8-2libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


216kB215kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1cl-ipv61.6.8-2libc, bird1-ipv6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1c-ipv61.6.8-2libc, librt, libpthread, libreadline8, libncurses6, bird1-ipv6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1-ipv61.6.8-2libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


241kB240kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionluci-app-bird1-ipv60.3-5libc, luci-base, luci-compat, bird1-ipv6-uciLuCI support for BIRD (v1.6) (IPv6)

8kB7kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionluci-app-bird1-ipv40.3-5libc, luci-base, luci-compat, bird1-ipv4-uciLuCI support for BIRD (v1.6) (IPv4)

8kB7kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionbird1-ipv6-uci0.3-5libc, libuci20130104, uci, bird1-ipv6The BIRD UCI module (v1.6) (IPv6)

6kB5kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionbird1-ipv4-uci0.3-5libc, libuci20130104, uci, bird1-ipv4The BIRD UCI module (v1.6) (IPv4)

7kB6kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionolsrd-mod-dot-draw0.9.6.2-v0.9.6.2libc, olsrdpackages:pkgdata:olsrd-mod-dot-draw, Dot topology information plugin

4kB3kBBSD-3-ClauseSaverio Protopackages:pkgdata:olsrd-mod-dot-draw, Bug reportspackages:pkgdata:olsrd-mod-dot-draw, Sources
network---routing-and-redirectionbmx7-iwinfo7.1.1-4libc, bmx7, libiwinfo20210430link characteristics plugin via libiwinfo (recommended!)

4kB3kBGPL-2.0-or-laterAxel NeumannBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun