Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ↓ ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network | 464xlat | 13 | libc, kmod-nat46, ip | 464xlat provides support to deploy limited IPv4 access services to mobile and wireline IPv6-only edge networks without encapsulation (RFC6877) | 5kB | 4kB | GPL-2.0 | Hans Dedecker | Bug reports | Sources |
| network | 464xlat | 13 | libc, kmod-nat46, ip | packages:pkgdata:464xlat, 464xlat provides support to deploy limited IPv4 access services to mobile and wireline IPv6-only edge networks without encapsulation (RFC6877) | 5kB | 4kB | GPL-2.0 | Hans Dedecker | packages:pkgdata:464xlat, Bug reports | packages:pkgdata:464xlat, Sources |
| network | UDPspeeder | 20210116.0-3 | libc, libstdcpp6, librt, libatomic1 | A Tunnel which Improves your Network Quality on a High-latency Lossy Link by using Forward Error Correction,for All Traffics(TCP/UDP/ICMP) | 72kB | 71kB | MIT | Nishant Sharma | Bug reports | Sources |
| network | mikrotik-btest | 0.5.1-1 | libc, libpthread, librt | A bandwidth test client compatible with Mikrotik's RouterOS BTest server. | 8kB | 7kB | GPLv3 | Roger Pueyo Centelles | Bug reports | Sources |
| network | acme | 3.0.6-3 | libc, wget-ssl, ca-bundle, openssl-util, socat | A client for issuing Letsencrypt certificates. | 54kB | 53kB | GPL-3.0-only | Toke Høiland-Jørgensen | Bug reports | Sources |
| network | acme | 3.0.6-3 | libc, wget-ssl, ca-bundle, openssl-util, socat | packages:pkgdata:acme, A client for issuing Letsencrypt certificates. | 54kB | 53kB | GPL-3.0-only | Toke Høiland-Jørgensen | packages:pkgdata:acme, Bug reports | packages:pkgdata:acme, Sources |
| network | libcurl4 | 8.4.0-1 | libc, librt, libpthread, libmbedtls12, libnghttp2-14, ca-bundle | A client-side URL transfer library | 155kB | 154kB | MIT | Stan Grishin | Bug reports | Sources |
| network | dnscrypt-proxy2 | 2.1.2-1 | libc, ca-bundle | A flexible DNS proxy, with support for modern encrypted DNS protocols such as DNSCrypt v2 and DNS-over-HTTPS. | 3811kB | 3820kB | ISC | Josef Schlehofer | Bug reports | Sources |
| network | dnscrypt-proxy2 | 2.1.2-1 | libc, ca-bundle | packages:pkgdata:dnscrypt-proxy2, A flexible DNS proxy, with support for modern encrypted DNS protocols such as DNSCrypt v2 and DNS-over-HTTPS. | 3811kB | 3820kB | ISC | Josef Schlehofer | packages:pkgdata:dnscrypt-proxy2, Bug reports | packages:pkgdata:dnscrypt-proxy2, Sources |
| network | golang-github-jedisct1-dnscrypt-proxy2-dev | 2.1.2-1 | libc, ca-bundle | A flexible DNS proxy, with support for modern encrypted DNS protocols such as DNSCrypt v2 and DNS-over-HTTPS. This package provides the source files for the client/bridge program. | 5992kB | 6123kB | ISC | Josef Schlehofer | Bug reports | Sources |
| network | radsecproxy | 1.9.0-3 | libc, libopenssl1.1, libpthread, libnettle8 | A generic radius proxy for UDP/TLS (RadSec) | 62kB | 61kB | BSD-3-CLAUSE | Toke Høiland-Jørgensen | Bug reports | Sources |
| network | proxychains-ng | 4.16-1 | libc, librt, libpthread | A hook preloader that allows to redirect TCP traffic of existing dynamically linked programs through one or more SOCKS or HTTP proxies. | 21kB | 20kB | GPL-2.0-or-later | Daniel Bermond | Bug reports | Sources |
| network | rssileds | 3 | libc, libiwinfo20210430, libnl-tiny1, libubox20220515, libuci20130104 | A small process written in C to update the signal-strength indicator LEDs | 4kB | 3kB | Daniel Golle | Bug reports | Sources | |
| network | fakeidentd | 2.6-2 | libc | A static secure identd, only one source file. | 5kB | 4kB | GPL-2.0-or-later | Daniel Gimpelevich | Bug reports | Sources |
| network | fakeidentd | 2.6-2 | libc | packages:pkgdata:fakeidentd, A static secure identd, only one source file. | 5kB | 4kB | GPL-2.0-or-later | Daniel Gimpelevich | packages:pkgdata:fakeidentd, Bug reports | packages:pkgdata:fakeidentd, Sources |
| network | mini_snmpd | 1.6-3 | libc, jsonfilter, ubus, procd, ubox | A tiny SNMP server for embedded systems | 26kB | 25kB | GPL-2.0 | Marcin Jurkowski | Bug reports | Sources |
| network | bpftool-minimal | 2022-03-08-04c465fd-1 | libc, libelf1 | A tool for inspection and simple manipulation of eBPF programs and maps. | 159kB | 158kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | bpftool-minimal | 2022-03-08-04c465fd-1 | libc, libelf1 | packages:pkgdata:bpftool-minimal, A tool for inspection and simple manipulation of eBPF programs and maps. | 159kB | 158kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | packages:pkgdata:bpftool-minimal, Bug reports | packages:pkgdata:bpftool-minimal, Sources |
| network | bpftool-full | 2022-03-08-04c465fd-1 | libc, librt, libpthread, libelf1, libbfd, libopcodes | A tool for inspection and simple manipulation of eBPF programs and maps. This full version uses libbfd and libopcodes to support disassembly of eBPF programs and jited code. | 132kB | 131kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | Bug reports | Sources |
| network | bpftool-full | 2022-03-08-04c465fd-1 | libc, librt, libpthread, libelf1, libbfd, libopcodes | packages:pkgdata:bpftool-full, A tool for inspection and simple manipulation of eBPF programs and maps. This full version uses libbfd and libopcodes to support disassembly of eBPF programs and jited code. | 132kB | 131kB | GPL-2.0-only OR BSD-2-Clause | Tony Ambardar | packages:pkgdata:bpftool-full, Bug reports | packages:pkgdata:bpftool-full, Sources |
| network | travelmate | 2.1.0-1 | libc, iwinfo, jshn, jsonfilter, curl, ca-bundle | A wlan connection manager for travel router. Please see https://github.com/openwrt/packages/blob/master/net/travelmate/files/README.md for further information. | 16kB | 15kB | GPL-3.0-or-later | Dirk Brenken | Bug reports | Sources |
| network | uradvd | 2021-09-14-9b0da60e-2 | libc | Advertise an IPv6 prefix/route via SLAAC. | 7kB | 6kB | BSD-2-Clause | Moritz Warning | Bug reports | Sources |
| network | ahcpd | 0.53-3 | libc, ip, librt | Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 23kB | 22kB | MIT | Gabriel Kerneis | Bug reports | Sources |
| network | ahcpd | 0.53-3 | libc, ip, librt | packages:pkgdata:ahcpd, Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. | 23kB | 22kB | MIT | Gabriel Kerneis | packages:pkgdata:ahcpd, Bug reports | packages:pkgdata:ahcpd, Sources |
| network | apinger | 2015-04-09-78eb3287-3 | libc | Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. | 31kB | 30kB | GPL-2.0-only | Alex Samorukov | Bug reports | Sources |
| network | apinger | 2015-04-09-78eb3287-3 | libc | packages:pkgdata:apinger, Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. | 31kB | 30kB | GPL-2.0-only | Alex Samorukov | packages:pkgdata:apinger, Bug reports | packages:pkgdata:apinger, Sources |
| network | static-neighbor-reports | 1-2 | libc, libuci-lua, libubus-lua, lua | Allows to configure static neighbor reports for hostapd interfaces. These neighbor reports are avilable to clients using IEEE 802.11k. | 1kB | 0kB | GPL-2.0-only | David Bauer | Bug reports | Sources |
| network | static-neighbor-reports | 1-2 | libc, libuci-lua, libubus-lua, lua | packages:pkgdata:static-neighbor-reports, Allows to configure static neighbor reports for hostapd interfaces. These neighbor reports are avilable to clients using IEEE 802.11k. | 1kB | 0kB | GPL-2.0-only | David Bauer | packages:pkgdata:static-neighbor-reports, Bug reports | packages:pkgdata:static-neighbor-reports, Sources |
| network | iotivity-example-garage | 1.2.1-2 | libc, iotivity, iotivity-cpp, iotivity-resource-directory-lib | An IoTivity example application | 58kB | 58kB | Apache-2.0 | Hauke Mehrtens | Bug reports | Sources |
| network | netdiscover | 0.3-pre-beta7-2 | libc, libpcap1, libnet-1.2.x, libpthread | An active/passive address reconnaissance tool | 286kB | 290kB | GPL-2.0 | Mislav Novakovic | Bug reports | Sources |
| network | libavahi-nodbus-support | 0.8-8 | libc, libpthread | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . The libavahi package contains the mDNS/DNS-SD shared libraries, used by other programs. Specifically, it provides libavahi-core and libavahi-common libraries. . Selecting this package modifies the build configuration so that avahi packages are built without support for D-BUS enabled; it does not generate a separate binary of its own. | 80kB | 79kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network | libavahi-dbus-support | 0.8-8 | libc, dbus | Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . The libavahi package contains the mDNS/DNS-SD shared libraries, used by other programs. Specifically, it provides libavahi-core and libavahi-common libraries. . The libavahi-dbus-support package enables D-Bus support in avahi, needed to support the libavahi-client library and avahi-utils. . Selecting this package modifies the build configuration so that avahi packages are built with support for D-BUS enabled; it does not generate a separate binary of its own. It also automatically adds the D-Bus package to the build. libavahi-dbus-support is selected automatically if you select libavahi-client or avahi-utils. | 80kB | 79kB | LGPL-2.1-or-later | Ted Hess | Bug reports | Sources |
| network | bwping | 2.5-1 | libc | BWPing is a tool to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism. It does not require any special software on the remote host. The only requirement is the ability to respond on ICMP echo request messages. BWPing supports both IPv4 and IPv6 networks. | 8kB | 7kB | BSD-2-Clause | Oleg Derevenetz | Bug reports | Sources |
| network | bwping | 2.5-1 | libc | packages:pkgdata:bwping, BWPing is a tool to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism. It does not require any special software on the remote host. The only requirement is the ability to respond on ICMP echo request messages. BWPing supports both IPv4 and IPv6 networks. | 8kB | 7kB | BSD-2-Clause | Oleg Derevenetz | packages:pkgdata:bwping, Bug reports | packages:pkgdata:bwping, Sources |
| network | bwm-ng | 0.6.3-1 | libc | Bandwidth Monitor NG is a small and simple console-based live network and disk io bandwidth monitor. | 11kB | 10kB | GPL2-2.0 | Julen Landa Alustiza | Bug reports | Sources |
| network | bwm-ng | 0.6.3-1 | libc | packages:pkgdata:bwm-ng, Bandwidth Monitor NG is a small and simple console-based live network and disk io bandwidth monitor. | 11kB | 10kB | GPL2-2.0 | Julen Landa Alustiza | packages:pkgdata:bwm-ng, Bug reports | packages:pkgdata:bwm-ng, Sources |
| network | beanstalkd | 1.9-2 | libc, librt, libpthread | Beanstalk is a simple, fast work queue. | 22kB | 21kB | MIT | Philip Prindeville | Bug reports | Sources |
| network | beanstalkd | 1.9-2 | libc, librt, libpthread | packages:pkgdata:beanstalkd, Beanstalk is a simple, fast work queue. | 22kB | 21kB | MIT | Philip Prindeville | packages:pkgdata:beanstalkd, Bug reports | packages:pkgdata:beanstalkd, Sources |
| network | remserial | 1.4-2 | libc | Bridge TCP/IP port with a device | 6kB | 5kB | GPL-2.0-or-later | Nuno Goncalves | Bug reports | Sources |
| network | remserial | 1.4-2 | libc | packages:pkgdata:remserial, Bridge TCP/IP port with a device | 6kB | 5kB | GPL-2.0-or-later | Nuno Goncalves | packages:pkgdata:remserial, Bug reports | packages:pkgdata:remserial, Sources |
| network | cifsmount | 6.11-2 | libc, kmod-fs-cifs | CIFS mount | 13kB | 12kB | GPL-3.0-or-later | common packages maintainers | Bug reports | Sources |
| network | cifsmount | 6.11-2 | libc, kmod-fs-cifs | packages:pkgdata:cifsmount, CIFS mount | 13kB | 12kB | GPL-3.0-or-later | common packages maintainers | packages:pkgdata:cifsmount, Bug reports | packages:pkgdata:cifsmount, Sources |
| network | rpcapd | 1.10.1-4 | libc, libpcap1 | Capture daemon to be controlled by a remote libpcap application | 121kB | 120kB | BSD-3-Clause | Felix Fietkau | Bug reports | Sources |
| network | seafile-ccnet | 7.1.5-1 | libc, glib2, jansson4, libevent2-7, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1 | Ccnet is a framework for writing networked applications in C. | 137kB | 137kB | AGPL-3.0-only | Alexandru Ardelean, Jeffery To, | Bug reports | Sources |
| network | vallumd | 0.2.0-1 | libc, ca-bundle, ipset, libmosquitto, libopenssl1.1 | Centralized or distributed blacklist | 5kB | 5kB | GPL-3.0 | Stijn Tintel | Bug reports | Sources |
| network | vallumd | 0.2.0-1 | libc, ca-bundle, ipset, libmosquitto, libopenssl1.1 | packages:pkgdata:vallumd, Centralized or distributed blacklist | 5kB | 5kB | GPL-3.0 | Stijn Tintel | packages:pkgdata:vallumd, Bug reports | packages:pkgdata:vallumd, Sources |
| network | pingcheck | 2022-03-01-1 | libc, librt, libpthread, libubus20220601, libuci20130104 | Checks by using “ping” (ICMP echo) or by opening connections to TCP port 80 whether a configured host (normally on the internet) can be reached via a specific interface. Then makes this information available via ubus and triggers “online” and “offline” scripts. | 10kB | 9kB | GPL-2.0-or-later | Bruno Randolf | Bug reports | Sources |
| network | lynx | 2.8.9rel.1-2 | libc, librt, libpthread, libncursesw6, zlib, libopenssl1.1, ca-bundle | Classic non-graphical (text-mode) web browser | 374kB | 377kB | GPL-2.0 | Leonid Esman | Bug reports | Sources |
| network | cshark | 2020-07-22-c0d32fb6-2 | libc, libjson-c5, libpcap1, libuci20130104, libubox20220515, libuclient20201210, libustream-mbedtls20201210 | CloudShark capture tool | 8kB | 7kB | BSD-2-Clause | Luka Perkov | Bug reports | Sources |
| network | cshark | 2020-07-22-c0d32fb6-2 | libc, libjson-c5, libpcap1, libuci20130104, libubox20220515, libuclient20201210, libustream-mbedtls20201210 | packages:pkgdata:cshark, CloudShark capture tool | 8kB | 7kB | BSD-2-Clause | Luka Perkov | packages:pkgdata:cshark, Bug reports | packages:pkgdata:cshark, Sources |
| Next page | ||||||||||