This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='utilities'

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcı Hata raporuKaynak kod
utilitiesnand-utils2.0.2-1libcpackages:pkgdata:nand-utils, Utilities for NAND devices.

54kB55kBGPLv2John Crispinpackages:pkgdata:nand-utils, Bug reportspackages:pkgdata:nand-utils, Sources
utilitiesfritz-tffs-nand1libcUtility to partially read the TFFS filesystems on NAND flash.

4kB3kBOpenWrt teamBug reportsSources
utilitiesravpower-mcu2020-06-19-1665d9e9-2libcUtility to control the RAVPower RP-WD009 PMIC

2kB2kBGPL-2.0-or-laterDavid BauerBug reportsSources
utilitiespolicycoreutils-semodule3.3-1libc, librt, libpthread, policycoreutils, libsemanagePolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the semodule utility.

7kB6kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-genhomedircon3.3-1libc, policycoreutils, libsemanagePolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the genhomedircon utility.

7kB6kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiesbcm27xx-userland97bc8180ad682b004ea22..7-1libcBCM27xx userland tools including vcgencmd and tvservice.

714kB715kBBSD-3-ClauseÁlvaro Fernández RojasBug reportsSources
utilitiescheckpolicy3.3-1libccheckpolicy is the SELinux policy compiler. It uses libsepol
to generate the binary policy. checkpolicy uses the static
libsepol since it deals with low level details of the policy
that have not been encapsulated/abstracted by a proper
shared library interface.

342kB342kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitieschkcon3.3-1libc, libsepolchkcon - determine if a security context is valid for a given binary policy

2kB1kBThomas PetazzoniBug reportsSources
utilitieslibblkid12.37.4-1libc, libuuid1The libblkid library is used to identify block devices (disks) as to their
content (e.g. filesystem type, partitions) as well as extracting additional
information such as filesystem labels/volume names, partitions, unique
identifiers/serial numbers...

132kB131kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitieslibfdisk12.37.4-1libc, libuuid1, libblkid1The libfdisk library is used for manipulating with partition tables.

166kB166kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitieslibmount12.37.4-1libc, libblkid1The libmount library is used to parse /etc/fstab, /etc/mtab and
/proc/self/mountinfo files, manage the mtab file, evaluate mount options...

143kB142kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitieslibsmartcols12.37.4-1libc, librtThe smartcols library is used to print tables and trees in a pretty way.

89kB88kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitieslibuuid12.37.4-1libc, librtThe UUID library is used to generate unique identifiers for objects
that may be accessible beyond the local system. This library
generates UUIDs compatible with those created by the Open Software
Foundation (OSF) Distributed Computing Environment (DCE) utility.

13kB12kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesmore2.37.4-1libc, librt, libpthread, libncurses6more is a filter for paging through text one screenful at a time

18kB17kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiespolicycoreutils-fixfiles3.3-1libc, librt, libpthread, policycoreutilsPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the fixfiles utility.

5kB4kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-load_policy3.3-1libc, policycoreutils, libselinuxPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the load_policy utility.

2kB2kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-newrole3.3-1libc, librt, libpthread, policycoreutils, libselinux, libauditPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the newrole utility.

7kB6kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-open_init_pty3.3-1libc, policycoreutilsPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the open_init_pty utility.

3kB2kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-pp3.3-1libc, policycoreutils, libsepolPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the pp utility.

3kB2kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-restorecon_xattr3.3-1libc, policycoreutils, libselinux, libsepol, libauditPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the restorecon_xattr utility.

4kB4kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-run_init3.3-1libc, policycoreutils, libselinux, libauditPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the run_init utility.

3kB2kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-secon3.3-1libc, policycoreutils, libselinuxPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the secon utility.

6kB5kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-sestatus3.3-1libc, policycoreutils, libselinuxPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the sestatus utility.

5kB4kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-setfiles3.3-1libc, policycoreutils, libselinux, libsepol, libauditPolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the setfiles utility.

5kB4kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils-setsebool3.3-1libc, librt, libpthread, policycoreutils, libsemanagePolicycoreutils is a collection of policy utilities
(originally the “core” set of utilities needed to use
SELinux, although it has grown a bit over time).

This package provides the setsebool utility.

4kB4kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiespolicycoreutils3.3-1libcSELinux policy utility common files

1kB0kBGPL-2.0-or-laterThomas PetazzoniBug reportsSources
utilitiessecilc3.3-1libc, libsepolThe SELinux CIL Compiler is a compiler that converts the CIL language as
described on the CIL design wiki into a kernel binary policy file.
Please see the CIL Design Wiki at:
http://github.com/SELinuxProject/cil/wiki/
for more information about the goals and features on the CIL language.

5kB4kBBSD-2-ClauseDominick GriftBug reportsSources
utilitiesucode2022-12-02-46d93c9c-1libc, libucode20220812ucode is a tiny script interpreter featuring an ECMAScript oriented
script language and Jinja-inspired templating.

7kB6kBISCJo-Philipp WichBug reportsSources
utilitiesucode-mod-nl802112022-12-02-46d93c9c-1libc, librt, libpthread, ucode, libnl-tiny1The nl80211 plugin provides access to the Linux wireless 802.11 netlink API.

18kB17kBISCJo-Philipp WichBug reportsSources
utilitiesucode-mod-rtnl2022-12-02-46d93c9c-1libc, ucode, libnl-tiny1The rtnl plugin provides access to the Linux routing netlink API.

24kB24kBISCJo-Philipp WichBug reportsSources
utilitiesucode-mod-math2022-12-02-46d93c9c-1libc, ucodeThe math plugin provides access to various <math.h> procedures.

3kB2kBISCJo-Philipp WichBug reportsSources
utilitiesucode-mod-ubus2022-12-02-46d93c9c-1libc, ucode, libubus20220601, libblobmsg-json20220515The ubus module allows ucode template scripts to enumerate and invoke ubus
procedures.

15kB14kBISCJo-Philipp WichBug reportsSources
utilitiesucode-mod-uci2022-12-02-46d93c9c-1libc, ucode, libuci20130104The uci module allows templates to read and modify uci configuration.

8kB7kBISCJo-Philipp WichBug reportsSources
utilitieslibucode202208122022-12-02-46d93c9c-1libc, libjson-c5The libucode package provides the shared runtime library for the ucode interpreter.

74kB73kBISCJo-Philipp WichBug reportsSources
utilitiesucode-mod-uloop2022-12-02-46d93c9c-1libc, ucode, libubox20220515The uloop module allows ucode scripts to interact with OpenWrt uloop event
loop implementation.

8kB8kBISCJo-Philipp WichBug reportsSources
utilitieslsns2.37.4-1libc, libblkid1, libmount1, libsmartcols1lsns lists information about all namespaces and their processes

18kB17kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiestaskset2.37.4-1libc, librtcontains: taskset

13kB12kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesucode-mod-struct2022-12-02-46d93c9c-1libc, ucodeThe struct plugin implemnts Python 3 compatible struct.pack/unpack functionality.

10kB9kBISCJo-Philipp WichBug reportsSources
utilitiesipcs2.37.4-1libc, librtipcs shows information on the inter-process communication facilities for
which the calling process has read access. By default it shows information
about all three resources: shared memory segments, message queues, and
semaphore arrays.

24kB23kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesucode-mod-resolv2022-12-02-46d93c9c-1libc, ucodeThe resolv plugin implements simple DNS resolving.

8kB8kBISCJo-Philipp WichBug reportsSources
utilitieslslocks2.37.4-1libc, libmount1, libsmartcols1lslocks lists information about all the currently held file locks in a Linux system

13kB12kBGPL-2.0-onlyOpenWrt teamBug reportsSources
utilitiesucode-mod-fs2022-12-02-46d93c9c-1libc, ucodeThe filesystem plugin module allows interaction with the local file system.

9kB8kBISCJo-Philipp WichBug reportsSources
utilitiesfritz-caldata1libc, zlibpackages:pkgdata:fritz-caldata, Utility to extract the zlib compress calibration data from flash.

3kB2kBOpenWrt teampackages:pkgdata:fritz-caldata, Bug reportspackages:pkgdata:fritz-caldata, Sources
utilitiesfritz-tffs-nand1libcpackages:pkgdata:fritz-tffs-nand, Utility to partially read the TFFS filesystems on NAND flash.

4kB3kBOpenWrt teampackages:pkgdata:fritz-tffs-nand, Bug reportspackages:pkgdata:fritz-tffs-nand, Sources
utilitiesgetopt2.37.4-1libc, librtpackages:pkgdata:getopt, getopt is used to break up (parse) options in command lines for easy parsing
by shell procedures, and to check for legal options

10kB9kBGPL-2.0-onlyOpenWrt teampackages:pkgdata:getopt, Bug reportspackages:pkgdata:getopt, Sources
utilitiescal2.37.4-1libc, libncurses6packages:pkgdata:cal, cal displays a simple calendar

24kB23kBGPL-2.0-onlyOpenWrt teampackages:pkgdata:cal, Bug reportspackages:pkgdata:cal, Sources
utilitiesucode2022-12-02-46d93c9c-1libc, libucode20220812packages:pkgdata:ucode, ucode is a tiny script interpreter featuring an ECMAScript oriented
script language and Jinja-inspired templating.

7kB6kBISCJo-Philipp Wichpackages:pkgdata:ucode, Bug reportspackages:pkgdata:ucode, Sources
utilitiescheckpolicy3.3-1libcpackages:pkgdata:checkpolicy, checkpolicy is the SELinux policy compiler. It uses libsepol
to generate the binary policy. checkpolicy uses the static
libsepol since it deals with low level details of the policy
that have not been encapsulated/abstracted by a proper
shared library interface.

342kB342kBGPL-2.0-or-laterThomas Petazzonipackages:pkgdata:checkpolicy, Bug reportspackages:pkgdata:checkpolicy, Sources
utilitiesct-bugcheck2016-07-21libcpackages:pkgdata:ct-bugcheck, Scripts to check for bugs (like firmware crashes) and package them for reporting.
Currently this script only checks for ath10k firmware crashes.
Once installed, you can enable this tool by creating a file called
/etc/config/bugcheck with the following contents:
DO_BUGCHECK=1
export DO_BUGCHECK


2kB1kBBen Greearpackages:pkgdata:ct-bugcheck, Bug reportspackages:pkgdata:ct-bugcheck, Sources
utilitiesdmesg2.37.4-1libc, libncursesw6packages:pkgdata:dmesg, dmesg is used to examine or control the kernel ring buffer

25kB24kBGPL-2.0-onlyOpenWrt teampackages:pkgdata:dmesg, Bug reportspackages:pkgdata:dmesg, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun