Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | ↓ Dosya boyutu | Yüklü boyut | Lisans | Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network | gnunet-dht-cli | 0.17.5-4 | libc, gnunet | packages:pkgdata:gnunet-dht-cli, GNUnet DHT command line clients | 10kB | 10kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-dht-cli, Bug reports | packages:pkgdata:gnunet-dht-cli, Sources |
| network | gnunet-fs-sqlite | 0.17.5-4 | libc, gnunet, gnunet-datastore, gnunet-sqlite | packages:pkgdata:gnunet-fs-sqlite, GNUnet libsqlite3 filesharing plugin | 10kB | 10kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-fs-sqlite, Bug reports | packages:pkgdata:gnunet-fs-sqlite, Sources |
| network | gnunet-mysql | 0.17.5-4 | libc, gnunet, libmysqlclient3 | packages:pkgdata:gnunet-mysql, GNUnet mySQL backend | 10kB | 9kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-mysql, Bug reports | packages:pkgdata:gnunet-mysql, Sources |
| network | chat | 2.4.9.git-2021-01-04-3 | libc | packages:pkgdata:chat, This package contains an utility to establish conversation with other PPP servers (via a modem). | 10kB | 9kB | BSD-4-Clause | Felix Fietkau | packages:pkgdata:chat, Bug reports | packages:pkgdata:chat, Sources |
| network | hnetd-nossl | 2018-12-21-c4376661-1 | libc, odhcpd, odhcp6c, netifd | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 101kB | 100kB | GPL-2.0-only | Steven Barth | Bug reports | Sources |
| network | hnetd-openssl | 2018-12-21-c4376661-1 | libc, odhcpd, odhcp6c, netifd, libopenssl1.1 | This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 101kB | 101kB | GPL-2.0-only | Steven Barth | Bug reports | Sources |
| network | mosquitto-nossl | 2.0.17-1 | libc, librt | Mosquitto is an open source (BSD licensed) message broker that implements the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight method of carrying out messaging using a publish/subscribe model. This package also includes some basic support for configuring via UCI This package is built WITHOUT SSL support. | 101kB | 100kB | EPL-2.0 | Karl Palsson | Bug reports | Sources |
| network | hnetd-nossl | 2018-12-21-c4376661-1 | libc, odhcpd, odhcp6c, netifd | packages:pkgdata:hnetd-nossl, This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol “hnet” for use in /etc/config/network. | 101kB | 100kB | GPL-2.0-only | Steven Barth | packages:pkgdata:hnetd-nossl, Bug reports | packages:pkgdata:hnetd-nossl, Sources |
| network | git-lfs | 3.0.1-1 | libc, git | Git Large File Storage (LFS) replaces large files such as audio samples, videos, datasets, and graphics with text pointers inside Git, while storing the file contents on a remote server like GitHub.com or GitHub Enterprise. | 10399kB | 10420kB | MIT | Jan Pavlinec | Bug reports | Sources |
| network | git-lfs | 3.0.1-1 | libc, git | packages:pkgdata:git-lfs, Git Large File Storage (LFS) replaces large files such as audio samples, videos, datasets, and graphics with text pointers inside Git, while storing the file contents on a remote server like GitHub.com or GitHub Enterprise. | 10399kB | 10420kB | MIT | Jan Pavlinec | packages:pkgdata:git-lfs, Bug reports | packages:pkgdata:git-lfs, Sources |
| network | irtt | 0.9.1-1 | libc | Isochronous round trip time tool. Useful for measuring one-way send or recv delay between hosts, among other things. | 1051kB | 1052kB | GPL-2.0-only | Marcel Vital | Bug reports | Sources |
| network | scapy-src | 2.4.5-1 | libc | Scapy is a powerful interactive packet manipulation program built on top of the Python interpreter. It can be used to forge or decode packets of a wide number of protocols, send them over the wire, capture them, match requests and replies, and much more. This package contains the Python source files for scapy. | 1059kB | 1070kB | GPL-2.0-only | W. Michael Petullo | Bug reports | Sources |
| network | adguardhome | 0.107.21-1 | libc, ca-bundle | Free and open source, powerful network-wide ads and trackers blocking DNS server. | 10899kB | 10920kB | GPL-3.0-only | Dobroslaw Kijowski | Bug reports | Sources |
| network | adguardhome | 0.107.21-1 | libc, ca-bundle | packages:pkgdata:adguardhome, Free and open source, powerful network-wide ads and trackers blocking DNS server. | 10899kB | 10920kB | GPL-3.0-only | Dobroslaw Kijowski | packages:pkgdata:adguardhome, Bug reports | packages:pkgdata:adguardhome, Sources |
| network | ppp | 2.4.9.git-2021-01-04-3 | libc, librt, libpthread, kmod-ppp | This package contains the PPP (Point-to-Point Protocol) daemon. | 109kB | 109kB | BSD-4-Clause | Felix Fietkau | Bug reports | Sources |
| network | bwm-ng | 0.6.3-1 | libc | Bandwidth Monitor NG is a small and simple console-based live network and disk io bandwidth monitor. | 11kB | 10kB | GPL2-2.0 | Julen Landa Alustiza | Bug reports | Sources |
| network | gnunet-gns-sqlite | 0.17.5-4 | libc, gnunet, gnunet-gns, gnunet-sqlite | GNUnet libsqlite3 gns plugins | 11kB | 10kB | AGPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-social-mysql | 0.10.2-git-20180205-b..7-1 | libc, gnunet, gnunet-mysql, gnunet-social | GNUnet mySQL social plugins | 11kB | 10kB | GPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | gnunet-social-sqlite | 0.10.2-git-20180205-b..7-1 | libc, gnunet, gnunet-social, gnunet-sqlite | GNUnet libsqlite3 social plugins | 11kB | 10kB | GPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | ifstat | 1.1-3 | libc, libnetsnmp | ifstat is a tool to report network interfaces bandwidth just like vmstat/iostat do for other system counters. It can monitor local interfaces by polling the kernel counters, or remote hosts interfaces using SNMP. | 11kB | 10kB | GPL-2.0 | Nikil Mehta | Bug reports | Sources |
| network | iputils-ping6 | 20101006-1 | libc, libssp | Program ping6 from iputils. Sends ICMP ECHO_REQUEST to network hosts (IPv6). | 11kB | 11kB | GPL-2.0+ | Jo-Philipp Wich | Bug reports | Sources |
| network | mac-telnet-server | 2015-09-02-37d83cbc-2 | libc, librt, libpthread, libubox20220515 | Open source MAC Telnet client and server utilities for connecting to Mikrotik RouterOS routers and Linux machines via MAC address. | 11kB | 10kB | GPL-2.0-or-later | Jo-Philipp Wich | Bug reports | Sources |
| network | nut-upsrw | 2.7.4-27 | libc, librt, libpthread, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsrw allows you to view and change the read/write variables inside your UPS. It sends commands via the upsd to your driver, which configures the hardware for you. The list of variables that allow you to change their values is based on the capabilities of your UPS equipment. Not all models support this feature. Typically, cheaper hardware does not support any of them. | 11kB | 10kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | ppp-mod-pppoe | 2.4.9.git-2021-01-04-3 | libc, kmod-pppoe | This package contains a PPPoE (PPP over Ethernet) plugin for ppp. | 11kB | 10kB | BSD-4-Clause | Felix Fietkau | Bug reports | Sources |
| network | snmpd | 5.9.1-7 | libc, libnetsnmp | Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP agent, dynamically linked. | 11kB | 10kB | MIT BSD-3-Clause-Clear | Stijn Tintel | Bug reports | Sources |
| network | usbip-client | 2.0-14 | libc, librt, libpthread, usbip, kmod-usbip-client | USB-over-IP (client) | 11kB | 10kB | GPL-2.0-only | Nuno Goncalves | Bug reports | Sources |
| network | ifstat | 1.1-3 | libc, libnetsnmp | packages:pkgdata:ifstat, ifstat is a tool to report network interfaces bandwidth just like vmstat/iostat do for other system counters. It can monitor local interfaces by polling the kernel counters, or remote hosts interfaces using SNMP. | 11kB | 10kB | GPL-2.0 | Nikil Mehta | packages:pkgdata:ifstat, Bug reports | packages:pkgdata:ifstat, Sources |
| network | bwm-ng | 0.6.3-1 | libc | packages:pkgdata:bwm-ng, Bandwidth Monitor NG is a small and simple console-based live network and disk io bandwidth monitor. | 11kB | 10kB | GPL2-2.0 | Julen Landa Alustiza | packages:pkgdata:bwm-ng, Bug reports | packages:pkgdata:bwm-ng, Sources |
| network | gnunet-gns-sqlite | 0.17.5-4 | libc, gnunet, gnunet-gns, gnunet-sqlite | packages:pkgdata:gnunet-gns-sqlite, GNUnet libsqlite3 gns plugins | 11kB | 10kB | AGPL-3.0 | Daniel Golle | packages:pkgdata:gnunet-gns-sqlite, Bug reports | packages:pkgdata:gnunet-gns-sqlite, Sources |
| network | tor-basic | 0.4.7.10-1 | libc, librt, libpthread, libevent2-7, libopenssl1.1, zlib, libcap | Tor is a toolset for a wide range of organizations and people that want to improve their safety and security on the Internet. Using Tor can help you anonymize web browsing and publishing, instant messaging, IRC, SSH, and more. Tor also provides a platform on which software developers can build new applications with built-in anonymity, safety, and privacy features. This package contains the basic tor daemon, without bridge/relay support. | 1107kB | 1113kB | Hauke Mehrtens,, | Bug reports | Sources | |
| network | tor-basic | 0.4.7.10-1 | libc, librt, libpthread, libevent2-7, libopenssl1.1, zlib, libcap | packages:pkgdata:tor-basic, Tor is a toolset for a wide range of organizations and people that want to improve their safety and security on the Internet. Using Tor can help you anonymize web browsing and publishing, instant messaging, IRC, SSH, and more. Tor also provides a platform on which software developers can build new applications with built-in anonymity, safety, and privacy features. This package contains the basic tor daemon, without bridge/relay support. | 1107kB | 1113kB | Hauke Mehrtens,, | packages:pkgdata:tor-basic, Bug reports | packages:pkgdata:tor-basic, Sources | |
| network | conserver | 8.2.6-1 | libc, libopenssl1.1 | Conserver is an application that allows multiple users to watch a serial console at the same time. It can log the data, allows users to take write-access of a console (one at a time), and has a variety of bells and whistles to accentuate that basic functionality. The idea is that conserver will log all your serial traffic so you can go back and review why something crashed, look at changes (if done on the console), or tie the console logs into a monitoring system (just watch the logfiles it creates). With multi-user capabilities you can work on equipment with others, mentor, train, etc. It also does all that client-server stuff so that, assuming you have a network connection, you can interact with any of the equipment from home or wherever. | 111kB | 110kB | BSD-3-Clause | Bjørn Mork | Bug reports | Sources |
| network | golang-github-nextdns-nextdns-dev | 1.41.0-1 | libc, ca-bundle | Official NextDNS DNS over HTTPS Proxy. This package provides the source files for the client/bridge program. | 111kB | 110kB | MIT | Olivier Poitrey | Bug reports | Sources |
| network | restool | 21.08-4 | libc | Layerscape DPAA2 dynamical management tool | 111kB | 110kB | OpenWrt team | Bug reports | Sources | |
| network | golang-github-nextdns-nextdns-dev | 1.41.0-1 | libc, ca-bundle | packages:pkgdata:golang-github-nextdns-nextdns-dev, Official NextDNS DNS over HTTPS Proxy. This package provides the source files for the client/bridge program. | 111kB | 110kB | MIT | Olivier Poitrey | packages:pkgdata:golang-github-nextdns-nextdns-dev, Bug reports | packages:pkgdata:golang-github-nextdns-nextdns-dev, Sources |
| network | i2pd | 2.48.0-1 | libc, libopenssl1.1, boost, boost-system, boost-filesystem, boost-program_options, boost-date_time, libatomic1, zlib | I2P (Invisible Internet Protocol) is a universal anonymous network layer. All communications over I2P are anonymous and end-to-end encrypted, participants don't reveal their real IP addresses. | 1118kB | 1120kB | BSD-3-Clause | David Yang | Bug reports | Sources |
| network | spoofer | 1.4.6-1 | libc, protobuf-lite, libpcap1, libpthread, libopenssl1.1 | The spoofer client is part of a system to measure the Internet's resistance to packets with a spoofed (forged) source IP address. This package comes bundled with small certificate files that allow secure communication with the spoofer server without depending on the large ca-certificates package. But if the server's private certificate ever changes, it will be necessary to either install the ca-certificates package or install an updated version of this package that has a newer bundled certificate. | 113kB | 113kB | GPL-3.0-or-later | Ken Keys | Bug reports | Sources |
| network | tgt | 1.0.81-1 | libc, librt, libpthread, libaio | The Linux target framework (tgt) is a user space SCSI target framework that supports the iSCSI and iSER transport protocols and that also supports multiple methods for accessing block storage. Tgt consists of a user-space daemon and user-space tools. | 117kB | 117kB | GPL-2.0-only | Maxim Storchak | Bug reports | Sources |
| network | tgt | 1.0.81-1 | libc, librt, libpthread, libaio | packages:pkgdata:tgt, The Linux target framework (tgt) is a user space SCSI target framework that supports the iSCSI and iSER transport protocols and that also supports multiple methods for accessing block storage. Tgt consists of a user-space daemon and user-space tools. | 117kB | 117kB | GPL-2.0-only | Maxim Storchak | packages:pkgdata:tgt, Bug reports | packages:pkgdata:tgt, Sources |
| network | gnunet-peerstore | 0.10.2-git-20180205-b..7-1 | libc, gnunet | GNUnet peerstore local persistency component | 12kB | 11kB | GPL-3.0 | Daniel Golle | Bug reports | Sources |
| network | nbd | 3.19-2 | libc, kmod-nbd | This package contains the network block device client. | 12kB | 11kB | GPL-2.0-or-later | Marcin Jurkowski | Bug reports | Sources |
| network | nbd | 3.19-2 | libc, kmod-nbd | packages:pkgdata:nbd, This package contains the network block device client. | 12kB | 11kB | GPL-2.0-or-later | Marcin Jurkowski | packages:pkgdata:nbd, Bug reports | packages:pkgdata:nbd, Sources |
| network | rpcapd | 1.10.1-4 | libc, libpcap1 | Capture daemon to be controlled by a remote libpcap application | 121kB | 120kB | BSD-3-Clause | Felix Fietkau | Bug reports | Sources |
| network | jool-tools | 4.1.5-1 | libc, libnl200, libxtables12 | Jool is an Open Source SIIT and NAT64 for Linux. This package provides the userspace control programs for Jool. | 122kB | 121kB | GPL-2.0-only | common packages maintainers | Bug reports | Sources |
| network | modemmanager | 1.18.6-2 | libc, glib2, dbus, ppp, libmbim, libqmi, libqrtr-glib | ModemManager is a D-Bus-activated service which allows controlling mobile broadband modems. Add kernel modules for your modems as needed. Select Utilities/usb-modeswitch if needed. | 1224kB | 1240kB | GPL-2.0-or-later | Nicholas Smith | Bug reports | Sources |
| network | modemmanager | 1.18.6-2 | libc, glib2, dbus, ppp, libmbim, libqmi, libqrtr-glib | packages:pkgdata:modemmanager, ModemManager is a D-Bus-activated service which allows controlling mobile broadband modems. Add kernel modules for your modems as needed. Select Utilities/usb-modeswitch if needed. | 1224kB | 1240kB | GPL-2.0-or-later | Nicholas Smith | packages:pkgdata:modemmanager, Bug reports | packages:pkgdata:modemmanager, Sources |
| network | netperf | 2.7.0-3 | libc, librt, libpthread | Network performance measurement tool | 123kB | 122kB | Custom | Toke Høiland-Jørgensen | Bug reports | Sources |
| network | dhcpcd | 7.2.2-1 | libc | DHCPv4, IPv6RS and DHCPv6 client with IPv4LL support dhcpcd is a one stop network management daemon which includes * RFC compliant DHCPv4 and DHCPv6 clients * DHCPv6 Prefix Delegation support * IPv4LL (aka ZeroConf) support * ARP address conflict resolution * Link carrier detection * Wireless SSID profiles * ARP ping profiles | 127kB | 126kB | BSD-2c | Marko Ratkaj | Bug reports | Sources |
| network | oor | 1.3.0-3 | libc, librt, confuse, kmod-tun, uci | This packet provides support for the Locator-ID Separation Protocol, VXLAN-GPE. | 127kB | 126kB | Apache-2.0 | Albert Lopez | Bug reports | Sources |
| network | jool-tools-netfilter | 2022-01-20-3 | libc, libnl200, kmod-jool-netfilter | Jool is an Open Source SIIT and NAT64 for Linux. This package provides the userspace control programs for Jool. | 127kB | 126kB | GPL-2.0-only | common packages maintainers | Bug reports | Sources |
| Previous page Next page | ||||||||||