This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network---routing-and-redirection'

SınıfAd VersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
network---routing-and-redirectionbabel-pinger0.1-1libc, librtBabel-pinger is a hack to export a default route into Babel for people
using DHCP to configure their routers rather than speaking to their
upstream provider with a proper routing protocol.

4kB3kBGabriel KerneisBug reportsSources
network---routing-and-redirectionbabel-pinger0.1-1libc, librtpackages:pkgdata:babel-pinger, Babel-pinger is a hack to export a default route into Babel for people
using DHCP to configure their routers rather than speaking to their
upstream provider with a proper routing protocol.

4kB3kBGabriel Kerneispackages:pkgdata:babel-pinger, Bug reportspackages:pkgdata:babel-pinger, Sources
network---routing-and-redirectionbird4-uci0.3-1libc, bird4, libuci, ucibird4 UCI integration module

7kB6kBGPL-3.0+Eloi CarboBug reportsSources
network---routing-and-redirectionbird6-uci0.3-1libc, bird6, libuci, ucibird6 UCI integration module

6kB5kBGPL-3.0+Eloi CarboBug reportsSources
network---routing-and-redirectionluci-app-bird40.3-1libc, libssp, bird4-uci, luci-basebird4 application for LuCI

8kB7kBGPL-3.0+Eloi CarboBug reportsSources
network---routing-and-redirectionluci-app-bird60.3-1libc, bird6-uci, luci-basebird6 application for LuCI

8kB7kBGPL-3.0+Eloi CarboBug reportsSources
network---routing-and-redirectionbird1-ipv4-uci0.3-5libc, libuci20130104, uci, bird1-ipv4The BIRD UCI module (v1.6) (IPv4)

7kB6kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionbird1-ipv6-uci0.3-5libc, libuci20130104, uci, bird1-ipv6The BIRD UCI module (v1.6) (IPv6)

6kB5kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionluci-app-bird1-ipv40.3-5libc, luci-base, luci-compat, bird1-ipv4-uciLuCI support for BIRD (v1.6) (IPv4)

8kB7kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionluci-app-bird1-ipv60.3-5libc, luci-base, luci-compat, bird1-ipv6-uciLuCI support for BIRD (v1.6) (IPv6)

8kB7kBGPL-3.0-or-laterRoger Pueyo CentellesBug reportsSources
network---routing-and-redirectionigmpproxy0.4-1libcIGMPproxy is a simple dynamic Multicast Routing Daemon using
only IGMP signalling (Internet Group Management Protocol).

19kB18kBGPL-2.0+Felix FietkauBug reportsSources
network---routing-and-redirectionigmpproxy0.4-1libcpackages:pkgdata:igmpproxy, IGMPproxy is a simple dynamic Multicast Routing Daemon using
only IGMP signalling (Internet Group Management Protocol).

19kB18kBGPL-2.0+Felix Fietkaupackages:pkgdata:igmpproxy, Bug reportspackages:pkgdata:igmpproxy, Sources
network---routing-and-redirectionprince0.4-3libc, librt, libpthread, libjson-c5Prince is an open source implementation of the PopRouting Algorithm.
It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.

Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
calculates the betweenness centrality using the topology and then computes the
the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
Since v0.4 it supports both OONF and OLSRd.

26kB25kBMITGabriele GemmiBug reportsSources
network---routing-and-redirectionyggdrasil0.4.3-1libc, kmod-tun, dkjson, libuci-luaYggdrasil builds end-to-end encrypted networks with IPv6.
Beyond the similarities with cjdns is a different routing
algorithm. This globally-agreed spanning tree uses greedy
routing in a metric space. Back-pressure routing techniques
allow advanced link aggregation bonding on per-stream basis.
In turn, a single stream will span across multiple network
interfaces simultaneously with much greater throughput.

3000kB3005kBLGPL-3.0-onlyWilliam FleurantBug reportsSources
network---routing-and-redirectionolsrd-mod-dot-draw0.9.6.2-v0.9.6.2libc, olsrdpackages:pkgdata:olsrd-mod-dot-draw, Dot topology information plugin

4kB3kBBSD-3-ClauseSaverio Protopackages:pkgdata:olsrd-mod-dot-draw, Bug reportspackages:pkgdata:olsrd-mod-dot-draw, Sources
network---routing-and-redirectionlldpd1.0.13-3libc, libcap, libevent2-7LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed
to supplant proprietary Link-Layer protocols such as
Extreme's EDP (Extreme Discovery Protocol) and
CDP (Cisco Discovery Protocol).
The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver
Link-Layer notifications to adjacent network devices.

124kB123kBISCStijn TintelBug reportsSources
network---routing-and-redirectiondcstad1.1.0-1libc, librt, libpthread, libdcwsocket, libdcwprotoImplementation of the Dual-Channel WiFi client daemon

6kB5kBApache-2.0Carey SonsinoBug reportsSources
network---routing-and-redirectionmrmctl1.1.0-1libc, kmod-macremapperCommand-line utility to manually manipulate the macremapper kernel module

5kB4kBApache-2.0Carey SonsinoBug reportsSources
network---routing-and-redirectiondcstad1.1.0-1libc, librt, libpthread, libdcwsocket, libdcwprotopackages:pkgdata:dcstad, Implementation of the Dual-Channel WiFi client daemon

6kB5kBApache-2.0Carey Sonsinopackages:pkgdata:dcstad, Bug reportspackages:pkgdata:dcstad, Sources
network---routing-and-redirectiondcwapd1.1.0-4libc, libstdcpp6, kmod-macremapper, libdcwsocket, libdcwproto, mrmctl, libuci20130104Implementation of the Dual-Channel WiFi AP daemon

68kB67kBApache-2.0Carey SonsinoBug reportsSources
network---routing-and-redirectiondcwapd1.1.0-4libc, libstdcpp6, kmod-macremapper, libdcwsocket, libdcwproto, mrmctl, libuci20130104packages:pkgdata:dcwapd, Implementation of the Dual-Channel WiFi AP daemon

68kB67kBApache-2.0Carey Sonsinopackages:pkgdata:dcwapd, Bug reportspackages:pkgdata:dcwapd, Sources
network---routing-and-redirectionbabeld1.12.2-1libc, libubus20220601, libubox20220515Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
with fast convergence properties. It is based on the ideas in DSDV, AODV and
Cisco's EIGRP, but is designed to work well not only in wired networks but
also in wireless mesh networks, and has been extended with support for
overlay networks. Babel is an IETF standard protocol (RFC 8966).

68kB67kBMITGabriel Kerneis, Baptiste Jonglez, Nick Hainke,Bug reportsSources
network---routing-and-redirectionbabeld1.12.2-1libc, libubus20220601, libubox20220515packages:pkgdata:babeld, Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
with fast convergence properties. It is based on the ideas in DSDV, AODV and
Cisco's EIGRP, but is designed to work well not only in wired networks but
also in wireless mesh networks, and has been extended with support for
overlay networks. Babel is an IETF standard protocol (RFC 8966).

68kB67kBMITGabriel Kerneis, Baptiste Jonglez, Nick Hainke,packages:pkgdata:babeld, Bug reportspackages:pkgdata:babeld, Sources
network---routing-and-redirectiontcpproxy1.2-4libctcpproxy is a simple tcp connection proxy which combines the features of rinetd and 6tunnel.
tcpproxy supports IPv4 and IPv6 and also supports connections from IPv6 to IPv4 endpoints and vice versa.

19kB18kBGPL-3.0-or-laterChristian PointnerBug reportsSources
network---routing-and-redirectionquagga-bgpd1.2.4-2libc, quagga, quagga-libzebraBGPv4, BGPv4+, BGPv4- routing engine

223kB224kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-isisd1.2.4-2libc, quagga, quagga-libzebraIS-IS routing engine

97kB97kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-libospf1.2.4-2libc, quagga, quagga-libzebraOSPF library

196kB197kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-libzebra1.2.4-2libc, quaggazebra library

142kB142kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ospf6d1.2.4-2libc, quagga, quagga-libospfOSPFv3 routing engine

93kB92kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ospfd1.2.4-2libc, quagga, quagga-libospfOSPFv2 routing engine

4kB3kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ripd1.2.4-2libc, quagga, quagga-libzebraRIP routing engine

39kB38kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-ripngd1.2.4-2libc, quagga, quagga-libzebraRIPNG routing engine

32kB31kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-vtysh1.2.4-2libc, quagga, quagga-libzebra, libreadline8, libncurses6integrated shell for Quagga routing software

124kB125kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-watchquagga1.2.4-2libc, quagga, quagga-libzebraQuagga watchdog

12kB11kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga-zebra1.2.4-2libc, quagga, quagga-libzebraZebra daemon

97kB96kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga1.2.4-2libc, librt, libpthreadA routing software package that provides TCP/IP based routing services
with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
OSPFv3, BGP-4, and BGP-4+

3kB2kBGPL-2.0-or-laterVasilis TsiligiannisBug reportsSources
network---routing-and-redirectionquagga1.2.4-2libc, librt, libpthreadpackages:pkgdata:quagga, A routing software package that provides TCP/IP based routing services
with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
OSPFv3, BGP-4, and BGP-4+

3kB2kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga, Bug reportspackages:pkgdata:quagga, Sources
network---routing-and-redirectionquagga-watchquagga1.2.4-2libc, quagga, quagga-libzebrapackages:pkgdata:quagga-watchquagga, Quagga watchdog

12kB11kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga-watchquagga, Bug reportspackages:pkgdata:quagga-watchquagga, Sources
network---routing-and-redirectionquagga-libospf1.2.4-2libc, quagga, quagga-libzebrapackages:pkgdata:quagga-libospf, OSPF library

196kB197kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga-libospf, Bug reportspackages:pkgdata:quagga-libospf, Sources
network---routing-and-redirectionquagga-ospf6d1.2.4-2libc, quagga, quagga-libospfpackages:pkgdata:quagga-ospf6d, OSPFv3 routing engine

93kB92kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga-ospf6d, Bug reportspackages:pkgdata:quagga-ospf6d, Sources
network---routing-and-redirectionquagga-ripngd1.2.4-2libc, quagga, quagga-libzebrapackages:pkgdata:quagga-ripngd, RIPNG routing engine

32kB31kBGPL-2.0-or-laterVasilis Tsiligiannispackages:pkgdata:quagga-ripngd, Bug reportspackages:pkgdata:quagga-ripngd, Sources
network---routing-and-redirectionbird41.6.3-1libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


188kB187kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird61.6.3-1libc, libssp, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


196kB195kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbirdc41.6.3-1libc, libssp, libreadline, libncurses, bird4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


8kB7kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbirdc61.6.3-1libc, libreadline, libncurses, bird6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbirdcl41.6.3-1libc, bird4BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


8kB7kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbirdcl61.6.3-1libc, libssp, bird6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


8kB7kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1-ipv61.6.8-2libc, libpthreadBIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
protocols.

In BGP, BIRD supports communities, multiprotocol extensions, MD5
authentication, 32bit AS numbers and could act as a route server or a
route reflector. BIRD also supports multiple RIBs, multiple kernel
routing tables and redistribution between the protocols with a powerful
configuration syntax.


241kB240kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1c-ipv61.6.8-2libc, librt, libpthread, libreadline8, libncurses6, bird1-ipv6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.

Unless you can't afford dependency on ncurses and readline, you
should install BIRD command-line client together with BIRD.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
network---routing-and-redirectionbird1cl-ipv61.6.8-2libc, bird1-ipv6BIRD is an internet routing daemon which manages TCP/IP routing tables
with support of modern routing protocols, easy to use configuration
interface and powerful route filtering language. It is lightweight and
efficient and therefore appropriate for small embedded routers.

This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
support into separate binaries. See also the bird2 package for the newer
branch which integrates support for both IP protocols in a single binary.

This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
commands can perform simple actions such as enabling/disabling of
protocols, telling BIRD to show various information, telling it to show
a routing table filtered by a filter, or asking BIRD to reconfigure.


9kB8kBGPL-2.0Álvaro Fernández RojasBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun