Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network---routing-and-redirection'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | Bakıcı | ↓ Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network---routing-and-redirection | cjdns | v21.1-4 | libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 | packages:pkgdata:cjdns, Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. | 393kB | 392kB | GPL-3.0-or-later | William Fleurant | packages:pkgdata:cjdns, Bug reports | packages:pkgdata:cjdns, Sources |
| network---routing-and-redirection | quagga-watchquagga | 1.2.4-2 | libc, quagga, quagga-libzebra | packages:pkgdata:quagga-watchquagga, Quagga watchdog | 12kB | 11kB | GPL-2.0-or-later | Vasilis Tsiligiannis | packages:pkgdata:quagga-watchquagga, Bug reports | packages:pkgdata:quagga-watchquagga, Sources |
| network---routing-and-redirection | babel-pinger | 0.1-1 | libc, librt | packages:pkgdata:babel-pinger, Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. | 4kB | 3kB | Gabriel Kerneis | packages:pkgdata:babel-pinger, Bug reports | packages:pkgdata:babel-pinger, Sources | |
| network---routing-and-redirection | babeld | 1.12.2-1 | libc, libubus20220601, libubox20220515 | packages:pkgdata:babeld, Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). | 68kB | 67kB | MIT | Gabriel Kerneis, Baptiste Jonglez, Nick Hainke, | packages:pkgdata:babeld, Bug reports | packages:pkgdata:babeld, Sources |
| network---routing-and-redirection | batmand | 1440-1 | libc, libpthread, kmod-tun | packages:pkgdata:batmand, B.A.T.M.A.N. layer 3 routing daemon | 41kB | 41kB | GPL-2.0 | Corinna "Elektra" Aichele | packages:pkgdata:batmand, Bug reports | packages:pkgdata:batmand, Sources |
| network---routing-and-redirection | bird2 | 2.13.1-1 | libc, libpthread | packages:pkgdata:bird2, BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. | 349kB | 349kB | GPL-2.0-or-later | Toke Høiland-Jørgensen | packages:pkgdata:bird2, Bug reports | packages:pkgdata:bird2, Sources |
| network---routing-and-redirection | bmx7-json | 7.1.1-4 | libc, bmx7, libjson-c5 | packages:pkgdata:bmx7-json, json plugin based on json-c | 8kB | 7kB | GPL-2.0-or-later | Axel Neumann | packages:pkgdata:bmx7-json, Bug reports | packages:pkgdata:bmx7-json, Sources |
| network---routing-and-redirection | bmx7-sms | 7.1.1-4 | libc, bmx7 | packages:pkgdata:bmx7-sms, sms plugin | 6kB | 5kB | GPL-2.0-or-later | Axel Neumann | packages:pkgdata:bmx7-sms, Bug reports | packages:pkgdata:bmx7-sms, Sources |
| network---routing-and-redirection | bmx7-table | 7.1.1-4 | libc, bmx7, bmx7-tun | packages:pkgdata:bmx7-table, plugin to announce routes from tables via tunnels | 10kB | 9kB | GPL-2.0-or-later | Axel Neumann | packages:pkgdata:bmx7-table, Bug reports | packages:pkgdata:bmx7-table, Sources |
| network---routing-and-redirection | bmx7-topology | 7.1.1-4 | libc, bmx7 | packages:pkgdata:bmx7-topology, topology plugin | 5kB | 4kB | GPL-2.0-or-later | Axel Neumann | packages:pkgdata:bmx7-topology, Bug reports | packages:pkgdata:bmx7-topology, Sources |
| network---routing-and-redirection | bird2cl | 2.13.1-1 | libc, bird2 | packages:pkgdata:bird2cl, BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 8kB | 7kB | GPL-2.0-or-later | Toke Høiland-Jørgensen | packages:pkgdata:bird2cl, Bug reports | packages:pkgdata:bird2cl, Sources |
| network---routing-and-redirection | bmx7 | 7.1.1-4 | libc, zlib, libmbedtls12, libiwinfo20210430 | packages:pkgdata:bmx7, BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing | 176kB | 175kB | GPL-2.0-or-later | Axel Neumann | packages:pkgdata:bmx7, Bug reports | packages:pkgdata:bmx7, Sources |
| network---routing-and-redirection | quagga-libospf | 1.2.4-2 | libc, quagga, quagga-libzebra | packages:pkgdata:quagga-libospf, OSPF library | 196kB | 197kB | GPL-2.0-or-later | Vasilis Tsiligiannis | packages:pkgdata:quagga-libospf, Bug reports | packages:pkgdata:quagga-libospf, Sources |
| network---routing-and-redirection | quagga-ospf6d | 1.2.4-2 | libc, quagga, quagga-libospf | packages:pkgdata:quagga-ospf6d, OSPFv3 routing engine | 93kB | 92kB | GPL-2.0-or-later | Vasilis Tsiligiannis | packages:pkgdata:quagga-ospf6d, Bug reports | packages:pkgdata:quagga-ospf6d, Sources |
| network---routing-and-redirection | quagga-ripngd | 1.2.4-2 | libc, quagga, quagga-libzebra | packages:pkgdata:quagga-ripngd, RIPNG routing engine | 32kB | 31kB | GPL-2.0-or-later | Vasilis Tsiligiannis | packages:pkgdata:quagga-ripngd, Bug reports | packages:pkgdata:quagga-ripngd, Sources |
| network---routing-and-redirection | bird1c-ipv6 | 1.6.8-2 | libc, librt, libpthread, libreadline8, libncurses6, bird1-ipv6 | packages:pkgdata:bird1c-ipv6, BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. | 9kB | 8kB | GPL-2.0 | Álvaro Fernández Rojas | packages:pkgdata:bird1c-ipv6, Bug reports | packages:pkgdata:bird1c-ipv6, Sources |
| network---routing-and-redirection | bird1cl-ipv4 | 1.6.8-2 | libc, bird1-ipv4 | packages:pkgdata:bird1cl-ipv4, BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. | 8kB | 7kB | GPL-2.0 | Álvaro Fernández Rojas | packages:pkgdata:bird1cl-ipv4, Bug reports | packages:pkgdata:bird1cl-ipv4, Sources |
| network---routing-and-redirection | bird2c | 2.13.1-1 | libc, bird2, libreadline8, libncurses6 | packages:pkgdata:bird2c, BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. | 10kB | 9kB | GPL-2.0-or-later | Toke Høiland-Jørgensen | packages:pkgdata:bird2c, Bug reports | packages:pkgdata:bird2c, Sources |
| network---routing-and-redirection | bcp38 | 5-11 | libc | bcp38 implements IETF BCP38 for home routers. See https://tools.ietf.org/html/bcp38. This package provides BCP38 for IPv4 only - IPv6 uses source specific default routes, so no firewall configuration is needed. | 3kB | 2kB | Toke Høiland-Jørgensen | Bug reports | Sources | |
| network---routing-and-redirection | igmpproxy | 0.4-1 | libc | IGMPproxy is a simple dynamic Multicast Routing Daemon using only IGMP signalling (Internet Group Management Protocol). | 19kB | 18kB | GPL-2.0+ | Felix Fietkau | Bug reports | Sources |
| network---routing-and-redirection | mwan3 | 2.11.7-1 | libc, ip, ipset, iptables, ip6tables, iptables-mod-conntrack-extra, iptables-mod-ipopt, jshn | Hotplug script which makes configuration of multiple WAN interfaces simple and manageable. With loadbalancing/failover support for up to 250 wan interfaces, connection tracking and an easy to manage traffic ruleset. | 22kB | 21kB | GPL-2.0 | Florian Eckert | Bug reports | Sources |
| network---routing-and-redirection | smcroute | 2.5.5-1 | libc | SMCRoute is a command line tool to manipulate the multicast routes of the Linux kernel. | 29kB | 29kB | GPL-2.0-or-later | Moritz Warning | Bug reports | Sources |
| network---routing-and-redirection | sslh | v1.22c-1 | libc, libconfig11, libcap, libpcre2 | SSL/SSH multiplexer | 36kB | 35kB | GPL-2.0-or-later | Jonathan McCrohan | Bug reports | Sources |
| network---routing-and-redirection | tcpproxy | 1.2-4 | libc | tcpproxy is a simple tcp connection proxy which combines the features of rinetd and 6tunnel. tcpproxy supports IPv4 and IPv6 and also supports connections from IPv6 to IPv4 endpoints and vice versa. | 19kB | 18kB | GPL-3.0-or-later | Christian Pointner | Bug reports | Sources |
| network---routing-and-redirection | yggdrasil | 0.4.3-1 | libc, kmod-tun, dkjson, libuci-lua | Yggdrasil builds end-to-end encrypted networks with IPv6. Beyond the similarities with cjdns is a different routing algorithm. This globally-agreed spanning tree uses greedy routing in a metric space. Back-pressure routing techniques allow advanced link aggregation bonding on per-stream basis. In turn, a single stream will span across multiple network interfaces simultaneously with much greater throughput. | 3000kB | 3005kB | LGPL-3.0-only | William Fleurant | Bug reports | Sources |
| network---routing-and-redirection | frr-babeld | 8.2.0-1 | libc, frr, frr-libfrr | babeld routing engine | 55kB | 55kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-ospfd | 8.2.0-1 | libc, frr, frr-libfrr | ospfd routing engine | 330kB | 333kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-nhrpd | 8.2.0-1 | libc, frr, frr-libfrr, libcares | nhrpd routing engine | 60kB | 60kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-libfrr | 8.2.0-1 | libc, frr, librt, libatomic1, libcap, libjson-c5, libyang | zebra library | 474kB | 482kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | dcstad | 1.1.0-1 | libc, librt, libpthread, libdcwsocket, libdcwproto | Implementation of the Dual-Channel WiFi client daemon | 6kB | 5kB | Apache-2.0 | Carey Sonsino | Bug reports | Sources |
| network---routing-and-redirection | bfdd | 2019-08-22-c54534be-4 | libc, libevent2-7, libjson-c5 | A port of Cumulus BFD daemon to a more portable daemon. Bidirectional Forwarding Detection (BFD) is a network protocol that is used to detect faults between two forwarding engines connected by a link. It provides low-overhead detection of faults even on physical media that doesn't support failure detection of any kind, such as Ethernet, virtual circuits, tunnels and MPLS Label Switched Paths. | 27kB | 26kB | GPL-2.0-or-later | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-bgpd | 8.2.0-1 | libc, frr, frr-libfrr | bgpd routing engine | 721kB | 725kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | dcwapd | 1.1.0-4 | libc, libstdcpp6, kmod-macremapper, libdcwsocket, libdcwproto, mrmctl, libuci20130104 | Implementation of the Dual-Channel WiFi AP daemon | 68kB | 67kB | Apache-2.0 | Carey Sonsino | Bug reports | Sources |
| network---routing-and-redirection | frr-bfdd | 8.2.0-1 | libc, frr, frr-libfrr | bfdd routing engine | 65kB | 65kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-eigrpd | 8.2.0-1 | libc, frr, frr-libfrr | eigrpd routing engine | 60kB | 60kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-fabricd | 8.2.0-1 | libc, frr, frr-libfrr | fabricd routing engine | 183kB | 184kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-isisd | 8.2.0-1 | libc, frr, frr-libfrr | isisd routing engine | 222kB | 223kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-ldpd | 8.2.0-1 | libc, frr, frr-libfrr | ldpd routing engine | 113kB | 113kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-ospf6d | 8.2.0-1 | libc, frr, frr-libfrr | ospf6d routing engine | 201kB | 204kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-pbrd | 8.2.0-1 | libc, frr, frr-libfrr | pbrd routing engine | 35kB | 35kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-pimd | 8.2.0-1 | libc, frr, frr-libfrr | pimd routing engine | 252kB | 256kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-ripd | 8.2.0-1 | libc, frr, frr-libfrr | ripd routing engine | 61kB | 63kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-ripngd | 8.2.0-1 | libc, frr, frr-libfrr | ripngd routing engine | 48kB | 49kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-staticd | 8.2.0-1 | libc, frr, frr-libfrr | staticd routing engine | 32kB | 32kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-vrrpd | 8.2.0-1 | libc, frr, frr-libfrr | vrrpd routing engine | 39kB | 40kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-vtysh | 8.2.0-1 | libc, frr, frr-libfrr, libreadline8, libncurses6, more | integrated shell for frr routing software | 185kB | 191kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-watchfrr | 8.2.0-1 | libc, frr, frr-libfrr | frr watchdog | 18kB | 17kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr-zebra | 8.2.0-1 | libc, frr, frr-libfrr | Zebra daemon | 432kB | 436kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | frr | 8.2.0-1 | libc, librt | FRRouting is free software that implements and manages various IPv4 and IPv6 routing protocols. Currently FRRouting supports BGP4, BGP4+, OSPFv2, OSPFv3, RIPv1, RIPv2, RIPng, IS-IS, PIM-SM/MSDP, LDP, VRRP and Babel as well as very early support for EIGRP and NHRP. | 4kB | 3kB | GPL-2.0-only LGPL-2.1-only | Lucian Cristian | Bug reports | Sources |
| network---routing-and-redirection | mrmctl | 1.1.0-1 | libc, kmod-macremapper | Command-line utility to manually manipulate the macremapper kernel module | 5kB | 4kB | Apache-2.0 | Carey Sonsino | Bug reports | Sources |
| Previous page Next page | ||||||||||