Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network---ip-addresses-and-names'
| Sınıf | Ad | ↓ Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network---ip-addresses-and-names | ddns-scripts | 2.8.2-25 | libc, ddns-scripts-services | packages:pkgdata:ddns-scripts, Dynamic DNS Client scripts (with IPv6 support) A highly configurable set of scripts for doing dynamic dns updates. - IPv6 support - DNS server support - Glue Record support (require BIND host or KNOT host) - DNS requests via TCP - Proxy server support - log file support - support to run once Info : https://openwrt.org/docs/guide-user/services/ddns/client | 24kB | 23kB | GPL-2.0 | common packages maintainers | packages:pkgdata:ddns-scripts, Bug reports | packages:pkgdata:ddns-scripts, Sources |
| network---ip-addresses-and-names | inadyn | 2.9.1-1 | libc, librt, libpthread, confuse, libopenssl1.1, ca-certificates | Inadyn is a small and simple Dynamic DNS, DDNS, client with HTTPS support | 31kB | 30kB | GPL-2.0-or-later | common packages maintainers | Bug reports | Sources |
| network---ip-addresses-and-names | inadyn | 2.9.1-1 | libc, librt, libpthread, confuse, libopenssl1.1, ca-certificates | packages:pkgdata:inadyn, Inadyn is a small and simple Dynamic DNS, DDNS, client with HTTPS support | 31kB | 30kB | GPL-2.0-or-later | common packages maintainers | packages:pkgdata:inadyn, Bug reports | packages:pkgdata:inadyn, Sources |
| network---ip-addresses-and-names | dnscrypt-proxy-resolvers | 2019-08-20-07ac3825-3 | libc, librt, libpthread | Package with current list of dnscrypt-proxy resolvers. | 9kB | 8kB | ISC | Damiano Renfer | Bug reports | Sources |
| network---ip-addresses-and-names | dnscrypt-proxy | 2019-08-20-07ac3825-3 | libc, libsodium, dnscrypt-proxy-resolvers | dnscrypt-proxy provides local service which can be used directly as your local resolver or as a DNS forwarder, encrypting and authenticating requests using the DNSCrypt protocol and passing them to an upstream server. The DNSCrypt protocol uses high-speed high-security elliptic-curve cryptography and is very similar to DNSCurve, but focuses on securing communications between a client and its first-level resolver. | 70kB | 69kB | ISC | Damiano Renfer | Bug reports | Sources |
| network---ip-addresses-and-names | hostip | 2019-08-20-07ac3825-3 | libc, libsodium | The DNSCrypt proxy ships with a simple tool named hostip that resolves a name to IPv4 or IPv6 addresses. | 45kB | 45kB | ISC | Damiano Renfer | Bug reports | Sources |
| network---ip-addresses-and-names | dnscrypt-proxy-resolvers | 2019-08-20-07ac3825-3 | libc, librt, libpthread | packages:pkgdata:dnscrypt-proxy-resolvers, Package with current list of dnscrypt-proxy resolvers. | 9kB | 8kB | ISC | Damiano Renfer | packages:pkgdata:dnscrypt-proxy-resolvers, Bug reports | packages:pkgdata:dnscrypt-proxy-resolvers, Sources |
| network---ip-addresses-and-names | dnscrypt-proxy | 2019-08-20-07ac3825-3 | libc, libsodium, dnscrypt-proxy-resolvers | packages:pkgdata:dnscrypt-proxy, dnscrypt-proxy provides local service which can be used directly as your local resolver or as a DNS forwarder, encrypting and authenticating requests using the DNSCrypt protocol and passing them to an upstream server. The DNSCrypt protocol uses high-speed high-security elliptic-curve cryptography and is very similar to DNSCurve, but focuses on securing communications between a client and its first-level resolver. | 70kB | 69kB | ISC | Damiano Renfer | packages:pkgdata:dnscrypt-proxy, Bug reports | packages:pkgdata:dnscrypt-proxy, Sources |
| network---ip-addresses-and-names | hostip | 2019-08-20-07ac3825-3 | libc, libsodium | packages:pkgdata:hostip, The DNSCrypt proxy ships with a simple tool named hostip that resolves a name to IPv4 or IPv6 addresses. | 45kB | 45kB | ISC | Damiano Renfer | packages:pkgdata:hostip, Bug reports | packages:pkgdata:hostip, Sources |
| network---ip-addresses-and-names | zonestitcher | 2020-05-22-0dfef1eb-3 | libc, libubox20220515 | This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. | 9kB | 8kB | GPL-2.0-only | Steven Barth | Bug reports | Sources |
| network---ip-addresses-and-names | ohybridproxy | 2020-05-22-0dfef1eb-3 | libc, libubox20220515, mdnsd | This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. | 11kB | 10kB | GPL-2.0-only | Steven Barth | Bug reports | Sources |
| network---ip-addresses-and-names | wsdd2 | 2021-10-22-9831daf2-4 | libc | Web Services for Devices or Web Services on Devices (WSD), is a Microsoft API to simplify programming connections to web service enabled devices, such as printers, scanners and file shares. This daemon advertises and responds to probe requests from Windows clients looking for file shares. It also implements LLMNR multicast name lookup services. | 20kB | 19kB | GPL-3.0-only | common packages maintainers | Bug reports | Sources |
| network---ip-addresses-and-names | v2ray-geoip | 202308030045-1 | libc, librt, libpthread | GeoIP List for V2Ray | 2156kB | 2407kB | CC-BY-SA-4.0 | Tianling Shen | Bug reports | Sources |
| network---ip-addresses-and-names | v2ray-geosite | 20230803193133-1 | libc, librt, libpthread | Geosite List for V2Ray | 451kB | 451kB | MIT | Tianling Shen | Bug reports | Sources |
| network---ip-addresses-and-names | knot-dig | 3.3.1-1 | knot-libs_3.3.1-1, libc, libatomic1, libedit, knot-libs | Knot DNS advanced DNS lookup utility. | 43kB | 42kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot-host | 3.3.1-1 | knot-libs_3.3.1-1, libc, libatomic1, libedit, knot-libs | Knot DNS simple DNS lookup utility. | 48kB | 48kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot-keymgr | 3.3.1-1 | knot-libs_3.3.1-1, knot-libzscanner_3.3.1-1, libc, libatomic1, libedit, liburcu, knot-libs, knot-libzscanner | Knot DNS DNSSEC key management utility. | 216kB | 215kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot-libs | 3.3.1-1 | libc, libpthread, libgnutls, lmdb | Knot DNS common DNS and DNSSEC libraries. | 130kB | 130kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot-libzscanner | 3.3.1-1 | libc, libpthread | Knot DNS zone parser library. | 51kB | 51kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot-nsupdate | 3.3.1-1 | knot-libs_3.3.1-1, knot-libzscanner_3.3.1-1, libc, libatomic1, libedit, knot-libs, knot-libzscanner | Knot DNS dynamic DNS update utility. | 48kB | 47kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot-tests | 3.3.1-1 | knot-libs_3.3.1-1, knot-libzscanner_3.3.1-1, libc, libatomic1, libedit, liburcu, knot-libs, knot-libzscanner | Unit tests for the Knot DNS server and libraries. Usage: /usr/share/knot/runtests.sh | 4860kB | 4867kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot-zonecheck | 3.3.1-1 | knot-libs_3.3.1-1, knot-libzscanner_3.3.1-1, libc, libatomic1, libedit, liburcu, knot-libs, knot-libzscanner | Knot DNS zonefile check utility. | 239kB | 238kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot | 3.3.1-1 | knot-libs_3.3.1-1, knot-libzscanner_3.3.1-1, libc, libatomic1, libedit, liburcu, knot-libs, knot-libzscanner | High-performance authoritative-only DNS server. | 475kB | 475kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | Bug reports | Sources |
| network---ip-addresses-and-names | knot-dig | 3.3.1-1 | knot-libs_3.3.1-1, libc, libatomic1, libedit, knot-libs | packages:pkgdata:knot-dig, Knot DNS advanced DNS lookup utility. | 43kB | 42kB | GPL-3.0 LGPL-2.0 0BSD BSD-3-Clause OLDAP-2.8 | Daniel Salzman | packages:pkgdata:knot-dig, Bug reports | packages:pkgdata:knot-dig, Sources |
| network---ip-addresses-and-names | nsd-control-setup | 4.2.4-1 | libc, librt, libpthread, openssl-util | NSD is an authoritative only, high performance, simple and open source name server. | 3kB | 2kB | BSD-3-Clause | Vasilis Tsiligiannis | Bug reports | Sources |
| network---ip-addresses-and-names | nsd-control | 4.2.4-1 | libc, librt, libpthread, libopenssl1.1 | NSD is an authoritative only, high performance, simple and open source name server. | 79kB | 78kB | BSD-3-Clause | Vasilis Tsiligiannis | Bug reports | Sources |
| network---ip-addresses-and-names | nsd-nossl | 4.2.4-1 | libc, librt, libpthread | NSD is an authoritative only, high performance, simple and open source name server. | 213kB | 213kB | BSD-3-Clause | Vasilis Tsiligiannis | Bug reports | Sources |
| network---ip-addresses-and-names | nsd | 4.2.4-1 | libc, librt, libpthread, libopenssl1.1 | NSD is an authoritative only, high performance, simple and open source name server. | 237kB | 237kB | BSD-3-Clause | Vasilis Tsiligiannis | Bug reports | Sources |
| network---ip-addresses-and-names | nsd-control | 4.2.4-1 | libc, librt, libpthread, libopenssl1.1 | packages:pkgdata:nsd-control, NSD is an authoritative only, high performance, simple and open source name server. | 79kB | 78kB | BSD-3-Clause | Vasilis Tsiligiannis | packages:pkgdata:nsd-control, Bug reports | packages:pkgdata:nsd-control, Sources |
| network---ip-addresses-and-names | isc-dhcp-client-ipv4 | 4.4.3-1 | libc, zlib | provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address. This package is compiled with IPv4 support only. | 999kB | 998kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-client-ipv6 | 4.4.3-1 | libc, librt, libpthread, zlib | provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address. This package is compiled with IPv4 and IPv6 support. | 840kB | 840kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-omshell-ipv4 | 4.4.3-1 | libc, isc-dhcp-server-ipv4 | provides an interactive way to connect to, query, and possibly change, the ISC DHCP Server's state via OMAPI, the Object Management API. This package is compiled with IPv4 support only. | 971kB | 971kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-omshell-ipv6 | 4.4.3-1 | libc, isc-dhcp-server-ipv6 | provides an interactive way to connect to, query, and possibly change, the ISC DHCP Server's state via OMAPI, the Object Management API. This package is compiled with IPv4 and IPv6 support. | 979kB | 979kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-relay-ipv4 | 4.4.3-1 | libc, librt, libpthread, zlib | provides a means for relaying DHCP and BOOTP requests from a subnet to which no DHCP server is directly connected to one or more DHCP servers on other subnets. This package is compiled with IPv4 support only. | 734kB | 733kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-relay-ipv6 | 4.4.3-1 | libc, zlib | provides a means for relaying DHCP and BOOTP requests from a subnet to which no DHCP server is directly connected to one or more DHCP servers on other subnets. This package is compiled with IPv4 and IPv6 support. | 983kB | 983kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-server-ipv4 | 4.4.3-1 | libc, zlib | implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 support only. | 1085kB | 1085kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-server-ipv6 | 4.4.3-1 | libc, zlib | implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. | 1121kB | 1120kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-dyndns-ipv4 | 4.4.3-1 | libc, zlib, isc-dhcp-server-ipv4, bind-server, bind-client | implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 support only. | 0kB | 0kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-dyndns-ipv6 | 4.4.3-1 | libc, zlib, isc-dhcp-server-ipv6, bind-server, bind-client | implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. | 0kB | 0kB | BSD-3-Clause | Philip Prindeville | Bug reports | Sources |
| network---ip-addresses-and-names | isc-dhcp-relay-ipv6 | 4.4.3-1 | libc, zlib | packages:pkgdata:isc-dhcp-relay-ipv6, provides a means for relaying DHCP and BOOTP requests from a subnet to which no DHCP server is directly connected to one or more DHCP servers on other subnets. This package is compiled with IPv4 and IPv6 support. | 983kB | 983kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-relay-ipv6, Bug reports | packages:pkgdata:isc-dhcp-relay-ipv6, Sources |
| network---ip-addresses-and-names | isc-dhcp-client-ipv4 | 4.4.3-1 | libc, zlib | packages:pkgdata:isc-dhcp-client-ipv4, provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address. This package is compiled with IPv4 support only. | 999kB | 998kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-client-ipv4, Bug reports | packages:pkgdata:isc-dhcp-client-ipv4, Sources |
| network---ip-addresses-and-names | isc-dhcp-server-ipv6 | 4.4.3-1 | libc, zlib | packages:pkgdata:isc-dhcp-server-ipv6, implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. | 1121kB | 1120kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-server-ipv6, Bug reports | packages:pkgdata:isc-dhcp-server-ipv6, Sources |
| network---ip-addresses-and-names | isc-dhcp-omshell-ipv6 | 4.4.3-1 | libc, isc-dhcp-server-ipv6 | packages:pkgdata:isc-dhcp-omshell-ipv6, provides an interactive way to connect to, query, and possibly change, the ISC DHCP Server's state via OMAPI, the Object Management API. This package is compiled with IPv4 and IPv6 support. | 979kB | 979kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-omshell-ipv6, Bug reports | packages:pkgdata:isc-dhcp-omshell-ipv6, Sources |
| network---ip-addresses-and-names | isc-dhcp-dyndns-ipv6 | 4.4.3-1 | libc, zlib, isc-dhcp-server-ipv6, bind-server, bind-client | packages:pkgdata:isc-dhcp-dyndns-ipv6, implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. | 0kB | 0kB | BSD-3-Clause | Philip Prindeville | packages:pkgdata:isc-dhcp-dyndns-ipv6, Bug reports | packages:pkgdata:isc-dhcp-dyndns-ipv6, Sources |
| network---ip-addresses-and-names | pdns-backend-geoip | 4.6.3-1 | libc, libatomic1, pdns, libmaxminddb, libyaml-cpp0.7 | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the GeoIP backend for the PowerDNS nameserver. | 86kB | 85kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-backend-ldap | 4.6.3-1 | libc, libatomic1, pdns, libopenldap, krb5-libs | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the OpenLDAP backend for the PowerDNS nameserver. | 276kB | 276kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-backend-lua2 | 4.6.3-1 | libc, librt, libpthread, libatomic1, pdns, lua, liblua5.1.5 | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the Lua2 backend for the PowerDNS nameserver. | 85kB | 85kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-backend-mysql | 4.6.3-1 | libc, libatomic1, pdns, libmysqlclient3 | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the MySQL backend for the PowerDNS nameserver. | 27kB | 26kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-backend-odbc | 4.6.3-1 | libc, libatomic1, pdns, unixodbc | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the ODBC backend for the PowerDNS nameserver. | 24kB | 23kB | Peter van Dijk | Bug reports | Sources | |
| network---ip-addresses-and-names | pdns-backend-pgsql | 4.6.3-1 | libc, libatomic1, pdns, libpq | PowerDNS is a versatile nameserver which supports a large number of different backends ranging from simple zonefiles to relational databases and load balancing/failover algorithms. PowerDNS tries to emphasize speed and security. This package contains the PostgreSQL backend for the PowerDNS nameserver. | 31kB | 30kB | Peter van Dijk | Bug reports | Sources | |
| Previous page Next page | ||||||||||