This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network---ip-addresses-and-names'

Sınıf AdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
network---ip-addresses-and-namesdnsproxy0.52.0-2libc, ca-bundlepackages:pkgdata:dnsproxy, A simple DNS proxy server that supports all existing DNS protocols including
DNS-over-TLS, DNS-over-HTTPS, DNSCrypt, and DNS-over-QUIC.Moreover, it can
work as a DNS-over-HTTPS, DNS-over-TLS or DNS-over-QUIC server.

3557kB3564kBApache-2.0Tianling Shenpackages:pkgdata:dnsproxy, Bug reportspackages:pkgdata:dnsproxy, Sources
network---ip-addresses-and-namesdnsproxy0.52.0-2libc, ca-bundleA simple DNS proxy server that supports all existing DNS protocols including
DNS-over-TLS, DNS-over-HTTPS, DNSCrypt, and DNS-over-QUIC.Moreover, it can
work as a DNS-over-HTTPS, DNS-over-TLS or DNS-over-QUIC server.

3557kB3564kBApache-2.0Tianling ShenBug reportsSources
network---ip-addresses-and-namesdnslookup1.9.1-1libc, ca-bundlepackages:pkgdata:dnslookup, Simple command line utility to make DNS lookups.
Supports all known DNS protocols: plain DNS, DoH, DoT, DoQ, DNSCrypt.

2805kB2810kBMITTianling Shenpackages:pkgdata:dnslookup, Bug reportspackages:pkgdata:dnslookup, Sources
network---ip-addresses-and-namesdnslookup1.9.1-1libc, ca-bundleSimple command line utility to make DNS lookups.
Supports all known DNS protocols: plain DNS, DoH, DoT, DoQ, DNSCrypt.

2805kB2810kBMITTianling ShenBug reportsSources
network---ip-addresses-and-namesdnsdist1.7.2-3libc, libh2o-evloop, libnghttp2-14, libopenssl1.1, libnetsnmp, re2-6, libfstrm, libsodium, libatomic1, libcap, libedit, libstdcpp6, lmdb, luajit, tinycdb1packages:pkgdata:dnsdist, dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life
is to route traffic to the best server, delivering top performance to legitimate
users while shunting or blocking abusive traffic.

1867kB1873kBGPL-2.0-onlyPeter van Dijkpackages:pkgdata:dnsdist, Bug reportspackages:pkgdata:dnsdist, Sources
network---ip-addresses-and-namesdnsdist1.7.2-3libc, libh2o-evloop, libnghttp2-14, libopenssl1.1, libnetsnmp, re2-6, libfstrm, libsodium, libatomic1, libcap, libedit, libstdcpp6, lmdb, luajit, tinycdb1dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life
is to route traffic to the best server, delivering top performance to legitimate
users while shunting or blocking abusive traffic.

1867kB1873kBGPL-2.0-onlyPeter van DijkBug reportsSources
network---ip-addresses-and-namesdnscrypt-proxy-resolvers2019-08-20-07ac3825-3libc, librt, libpthreadpackages:pkgdata:dnscrypt-proxy-resolvers, Package with current list of dnscrypt-proxy resolvers.

9kB8kBISCDamiano Renferpackages:pkgdata:dnscrypt-proxy-resolvers, Bug reportspackages:pkgdata:dnscrypt-proxy-resolvers, Sources
network---ip-addresses-and-namesdnscrypt-proxy-resolvers2019-08-20-07ac3825-3libc, librt, libpthreadPackage with current list of dnscrypt-proxy resolvers.

9kB8kBISCDamiano RenferBug reportsSources
network---ip-addresses-and-namesdnscrypt-proxy2019-08-20-07ac3825-3libc, libsodium, dnscrypt-proxy-resolverspackages:pkgdata:dnscrypt-proxy, dnscrypt-proxy provides local service which can be used directly as your
local resolver or as a DNS forwarder, encrypting and authenticating requests
using the DNSCrypt protocol and passing them to an upstream server.
The DNSCrypt protocol uses high-speed high-security elliptic-curve cryptography
and is very similar to DNSCurve, but focuses on securing communications between
a client and its first-level resolver.

70kB69kBISCDamiano Renferpackages:pkgdata:dnscrypt-proxy, Bug reportspackages:pkgdata:dnscrypt-proxy, Sources
network---ip-addresses-and-namesdnscrypt-proxy2019-08-20-07ac3825-3libc, libsodium, dnscrypt-proxy-resolversdnscrypt-proxy provides local service which can be used directly as your
local resolver or as a DNS forwarder, encrypting and authenticating requests
using the DNSCrypt protocol and passing them to an upstream server.
The DNSCrypt protocol uses high-speed high-security elliptic-curve cryptography
and is very similar to DNSCurve, but focuses on securing communications between
a client and its first-level resolver.

70kB69kBISCDamiano RenferBug reportsSources
network---ip-addresses-and-namesdns-over-https2.3.0-1libcClient and server software to query DNS over HTTPS, using Google DNS-over-HTTPS protocol and IETF DNS-over-HTTPS (RFC 8484).

4598kB4609kBMITMartin SchneiderBug reportsSources
network---ip-addresses-and-namesdhcp-forwarder0.11-1libc, librt, libpthreadpackages:pkgdata:dhcp-forwarder, This program forwards DHCP messages between subnets with different sublayer
broadcast domains. It is similarly to the DHCP relay agent dhcrelay of ISC's
DHCP, but has the following features which are important for me:

- Runs as non-root in a chroot-jail
- Uses “normal” AF_INET sockets; this allows to uses packetfilters to filter
incoming messages.
- The DHCP agent IDs can be defined freely
- Has a small memory footprint when using dietlibc

It tries to be RFC 2131/2132 and 3046 compliant. Probably it works with BOOTP
(RFC 951) also, but since the handling of the giaddr field is described
misleading (see RFC 1542), there may occur problems.

15kB14kBGPL-2.0Scott K Loganpackages:pkgdata:dhcp-forwarder, Bug reportspackages:pkgdata:dhcp-forwarder, Sources
network---ip-addresses-and-namesdhcp-forwarder0.11-1libc, librt, libpthreadThis program forwards DHCP messages between subnets with different sublayer
broadcast domains. It is similarly to the DHCP relay agent dhcrelay of ISC's
DHCP, but has the following features which are important for me:

- Runs as non-root in a chroot-jail
- Uses “normal” AF_INET sockets; this allows to uses packetfilters to filter
incoming messages.
- The DHCP agent IDs can be defined freely
- Has a small memory footprint when using dietlibc

It tries to be RFC 2131/2132 and 3046 compliant. Probably it works with BOOTP
(RFC 951) also, but since the handling of the giaddr field is described
misleading (see RFC 1542), there may occur problems.

15kB14kBGPL-2.0Scott K LoganBug reportsSources
network---ip-addresses-and-namesddns-scripts_route53-v12.7.8-1ddns-scripts, curl, openssl-utilDynamic DNS Client scripts extension for Amazon AWS Route53. Note: You
must also install ca-certificate or ca-bundle.
It requires:
“option username” to be a valid AWS access key id
“option password” to be the matching AWS secret key id
“option domain” to contain the hosted zone ID

3kB2kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts_nsupdate2.7.8-1ddns-scripts, bind-clientDynamic DNS Client scripts extension for direct updates using Bind nsupdate

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts_no-ip_com2.7.8-1ddns-scriptsDynamic DNS Client scripts extension for No-IP.com

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts_godaddy.com-v12.7.8-1ddns-scripts, curlDynamic DNS Client scripts extension for GoDaddy.com (require/install cURL)

3kB2kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts_freedns_42_pl2.7.8-1ddns-scripts, curlDynamic DNS Client scripts extension for freedns.42.pl

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts_cloudflare.com-v42.7.8-1ddns-scripts, curlDynamic DNS Client scripts extension for CloudFlare.com API-v4 (require/install cURL)

3kB2kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-transip2.8.2-25libc, librt, libpthread, ddns-scripts, curl, openssl-util, coreutils-mktemppackages:pkgdata:ddns-scripts-transip, Dynamic DNS Client scripts extension for “transip.nl”.
Note: You must also install ca-certificate or ca-bundle.
It requires:
“option username” to be a valid username for transip.nl
“option password” to be a valid matching private key
“option domain” to contain the base domain
“option param_enc” to contain the name of the DNS record to update
“option param_opt” to contain the TTL of the DNS record to update

2kB1kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-transip, Bug reportspackages:pkgdata:ddns-scripts-transip, Sources
network---ip-addresses-and-namesddns-scripts-transip2.8.2-25libc, librt, libpthread, ddns-scripts, curl, openssl-util, coreutils-mktempDynamic DNS Client scripts extension for “transip.nl”.
Note: You must also install ca-certificate or ca-bundle.
It requires:
“option username” to be a valid username for transip.nl
“option password” to be a valid matching private key
“option domain” to contain the base domain
“option param_enc” to contain the name of the DNS record to update
“option param_opt” to contain the TTL of the DNS record to update

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-services2.8.2-25libcpackages:pkgdata:ddns-scripts-services, Dynamic DNS Client definitions for supported services

4kB3kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-services, Bug reportspackages:pkgdata:ddns-scripts-services, Sources
network---ip-addresses-and-namesddns-scripts-services2.8.2-25libcDynamic DNS Client definitions for supported services

4kB3kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-route532.8.2-25libc, ddns-scripts, curl, openssl-utilDynamic DNS Client scripts extension for Amazon AWS “route53 API v1”.
Note: You must also install ca-certificate or ca-bundle.
It requires:
“option username” to be a valid AWS access key id
“option password” to be the matching AWS secret key id
“option domain” to contain the hosted zone ID

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-pdns2.8.2-25libc, ddns-scripts, curlpackages:pkgdata:ddns-scripts-pdns, Dynamic DNS Client scripts extension for “PowerDNS” via API.
It requires:
“option param_opt(Optional Parameter)” to be a valid root URL for the PowerDNS webserver
“option username” to be a valid subdomain for the PowerDNS domain
“option password” to be a valid API key for the PowerDNS webserver

1kB0kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-pdns, Bug reportspackages:pkgdata:ddns-scripts-pdns, Sources
network---ip-addresses-and-namesddns-scripts-pdns2.8.2-25libc, ddns-scripts, curlDynamic DNS Client scripts extension for “PowerDNS” via API.
It requires:
“option param_opt(Optional Parameter)” to be a valid root URL for the PowerDNS webserver
“option username” to be a valid subdomain for the PowerDNS domain
“option password” to be a valid API key for the PowerDNS webserver

1kB0kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-one2.8.2-25libc, ddns-scripts, curlpackages:pkgdata:ddns-scripts-one, Extension for one.com Control Panel

2kB1kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-one, Bug reportspackages:pkgdata:ddns-scripts-one, Sources
network---ip-addresses-and-namesddns-scripts-one2.8.2-25libc, ddns-scripts, curlExtension for one.com Control Panel

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-nsupdate2.8.2-25libc, ddns-scripts, bind-clientpackages:pkgdata:ddns-scripts-nsupdate, Dynamic DNS Client scripts extension for direct updates using bind nsupdate
The script directly updates a PowerDNS (or maybe bind server) via nsupdate
from bind-client package.
It requires:
“option dns_server” to be set to the server to be used by nsupdate.
“option username” should be set to the key name and
“option password” to the base64 encoded shared secret.

2kB1kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-nsupdate, Bug reportspackages:pkgdata:ddns-scripts-nsupdate, Sources
network---ip-addresses-and-namesddns-scripts-nsupdate2.8.2-25libc, ddns-scripts, bind-clientDynamic DNS Client scripts extension for direct updates using bind nsupdate
The script directly updates a PowerDNS (or maybe bind server) via nsupdate
from bind-client package.
It requires:
“option dns_server” to be set to the server to be used by nsupdate.
“option username” should be set to the key name and
“option password” to the base64 encoded shared secret.

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-ns12.8.2-25libc, ddns-scripts, curlpackages:pkgdata:ddns-scripts-ns1, Dynamic DNS Client scripts extension for “ns1.com”.
It requires:
“option username” to be a valid zone for ns1.com
“option password” to be a valid API key for ns1.com

1kB1kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-ns1, Bug reportspackages:pkgdata:ddns-scripts-ns1, Sources
network---ip-addresses-and-namesddns-scripts-ns12.8.2-25libc, ddns-scripts, curlDynamic DNS Client scripts extension for “ns1.com”.
It requires:
“option username” to be a valid zone for ns1.com
“option password” to be a valid API key for ns1.com

1kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-noip2.8.2-25libc, ddns-scriptspackages:pkgdata:ddns-scripts-noip, Dynamic DNS Client scripts extension for “no-ip.com”.

1kB1kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-noip, Bug reportspackages:pkgdata:ddns-scripts-noip, Sources
network---ip-addresses-and-namesddns-scripts-noip2.8.2-25libc, ddns-scriptsDynamic DNS Client scripts extension for “no-ip.com”.

1kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-godaddy2.8.2-25libc, ddns-scripts, curlpackages:pkgdata:ddns-scripts-godaddy, Dynamic DNS Client scripts extension for “godaddy.com API v1”.

3kB2kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-godaddy, Bug reportspackages:pkgdata:ddns-scripts-godaddy, Sources
network---ip-addresses-and-namesddns-scripts-godaddy2.8.2-25libc, ddns-scripts, curlDynamic DNS Client scripts extension for “godaddy.com API v1”.

3kB2kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-gandi2.8.2-25libc, librt, libpthread, ddns-scripts, curlpackages:pkgdata:ddns-scripts-gandi, Dynamic DNS Client scripts extension for “gandi.net”.
It requires:
“option username” to be a valid subdomain for gandi.net
“option password” to be a valid API key for gandi.net

1kB0kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-gandi, Bug reportspackages:pkgdata:ddns-scripts-gandi, Sources
network---ip-addresses-and-namesddns-scripts-gandi2.8.2-25libc, librt, libpthread, ddns-scripts, curlDynamic DNS Client scripts extension for “gandi.net”.
It requires:
“option username” to be a valid subdomain for gandi.net
“option password” to be a valid API key for gandi.net

1kB0kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-freedns2.8.2-25libc, ddns-scripts, curlpackages:pkgdata:ddns-scripts-freedns, Dynamic DNS Client scripts extension for “freedns.42.pl”.

1kB1kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-freedns, Bug reportspackages:pkgdata:ddns-scripts-freedns, Sources
network---ip-addresses-and-namesddns-scripts-freedns2.8.2-25libc, ddns-scripts, curlDynamic DNS Client scripts extension for “freedns.42.pl”.

1kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-dnspod2.8.2-25libc, ddns-scripts, curlpackages:pkgdata:ddns-scripts-dnspod, Dynamic DNS Client scripts extension for dnspod.cn API (require curl)

2kB2kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-dnspod, Bug reportspackages:pkgdata:ddns-scripts-dnspod, Sources
network---ip-addresses-and-namesddns-scripts-dnspod2.8.2-25libc, ddns-scripts, curlDynamic DNS Client scripts extension for dnspod.cn API (require curl)

2kB2kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-digitalocean2.8.2-25libc, ddns-scripts, curlDynamic DNS Client scripts extension for “digitalocean.com API v2”.
The script directly updates a DNS record using the DO API.
It requires:
“option dns_server” to be set to the server to be used by nsupdate.
“option domain” the dns domain to update the record for (eg. A-record: home.<example.com>)
“option username” the dns record name to update (eg. A-record: <home>.example.com)
“option param_opt” the id of the dns record to update (check using chrome inspector in the DO dns tab)
“option password” the api token generated in the DO panel

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-cnkuai2.8.2-25libc, ddns-scripts, curl, giflib-utilspackages:pkgdata:ddns-scripts-cnkuai, Dynamic DNS Client scripts extension for “cnkuai.cn”.
It requires:
“option username” to be a valid CnKuai control panel id
“option password” to be the matching CnKuai control panel password
“option domain” to contain the domain

2kB1kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts-cnkuai, Bug reportspackages:pkgdata:ddns-scripts-cnkuai, Sources
network---ip-addresses-and-namesddns-scripts-cnkuai2.8.2-25libc, ddns-scripts, curl, giflib-utilsDynamic DNS Client scripts extension for “cnkuai.cn”.
It requires:
“option username” to be a valid CnKuai control panel id
“option password” to be the matching CnKuai control panel password
“option domain” to contain the domain

2kB1kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts-cloudflare2.8.2-25libc, ddns-scripts, curlDynamic DNS Client scripts extension for cloudflare.com API v4 (require curl)

3kB3kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesddns-scripts2.8.2-25libc, ddns-scripts-servicespackages:pkgdata:ddns-scripts, Dynamic DNS Client scripts (with IPv6 support)
A highly configurable set of scripts for doing dynamic dns updates.
- IPv6 support
- DNS server support
- Glue Record support (require BIND host or KNOT host)
- DNS requests via TCP
- Proxy server support
- log file support
- support to run once
Info : https://openwrt.org/docs/guide-user/services/ddns/client

24kB23kBGPL-2.0common packages maintainerspackages:pkgdata:ddns-scripts, Bug reportspackages:pkgdata:ddns-scripts, Sources
network---ip-addresses-and-namesddns-scripts2.8.2-25libc, ddns-scripts-servicesDynamic DNS Client scripts (with IPv6 support)
A highly configurable set of scripts for doing dynamic dns updates.
- IPv6 support
- DNS server support
- Glue Record support (require BIND host or KNOT host)
- DNS requests via TCP
- Proxy server support
- log file support
- support to run once
Info : https://openwrt.org/docs/guide-user/services/ddns/client

24kB23kBGPL-2.0common packages maintainersBug reportsSources
network---ip-addresses-and-namesdanish0.1-1libc, python, python-dns, python-pcapy, python-dpkt, kmod-ipt-filter, iptables-mod-filter, dnsmasq-fullDanish is an experiment in middle-box DANE (RFC 6698) for HTTPS.
https://www.middlebox-dane.org/

9kB8kBGPL-3.0Andrew McConachieBug reportsSources
network---ip-addresses-and-namesbind-tools9.18.19-1libc, librt, libpthread, bind-check, bind-dig, bind-nslookup, bind-dnssec, bind-host, bind-rndcbind administration tools (all)

15kB14kBMPL-2.0Noah MeyerhansBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun