This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network---firewall'

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyut LisansBakıcıHata raporuKaynak kod
network---firewalliptables-mod-led1.8.7-7libc, librt, libpthread, libxtables12, kmod-ipt-ledpackages:pkgdata:iptables-mod-led, iptables extension for triggering a LED.

Targets:
- LED


2kB2kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-led, Bug reportspackages:pkgdata:iptables-mod-led, Sources
network---firewalliptables-mod-logmark3.21-1libc, iptables, kmod-ipt-logmarkpackages:pkgdata:iptables-mod-logmark, LOGMARK iptables extension

2kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-logmark, Bug reportspackages:pkgdata:iptables-mod-logmark, Sources
network---firewalliptables-mod-lscan3.21-1libc, librt, libpthread, iptables, kmod-ipt-lscanpackages:pkgdata:iptables-mod-lscan, lscan iptables extension

2kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-lscan, Bug reportspackages:pkgdata:iptables-mod-lscan, Sources
network---firewalliptables-mod-psd3.21-1libc, librt, libpthread, iptables, kmod-ipt-psdpackages:pkgdata:iptables-mod-psd, psd iptables extension

2kB2kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-psd, Bug reportspackages:pkgdata:iptables-mod-psd, Sources
network---firewalliptables-mod-quota23.21-1libc, iptables, kmod-ipt-quota2packages:pkgdata:iptables-mod-quota2, quota2 iptables extension

2kB2kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-quota2, Bug reportspackages:pkgdata:iptables-mod-quota2, Sources
network---firewalliptables-mod-rpfilter1.8.7-7libc, libxtables12, kmod-ipt-rpfilterpackages:pkgdata:iptables-mod-rpfilter, iptables extensions for reverse path filter test on a packet

Matches:
- rpfilter


2kB1kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-rpfilter, Bug reportspackages:pkgdata:iptables-mod-rpfilter, Sources
network---firewalliptables-mod-sysrq3.21-1libc, iptables, kmod-ipt-sysrqpackages:pkgdata:iptables-mod-sysrq, SYSRQ iptables extension

1kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-sysrq, Bug reportspackages:pkgdata:iptables-mod-sysrq, Sources
network---firewalliptables-mod-tproxy1.8.7-7libc, librt, libpthread, libxtables12, kmod-ipt-tproxypackages:pkgdata:iptables-mod-tproxy, Transparent proxy iptables extensions.

Targets:
- TPROXY


2kB2kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-tproxy, Bug reportspackages:pkgdata:iptables-mod-tproxy, Sources
network---firewalliptables-mod-u321.8.7-7libc, libxtables12, kmod-ipt-u32packages:pkgdata:iptables-mod-u32, U32 iptables extensions.

Matches:
- u32


3kB3kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-u32, Bug reportspackages:pkgdata:iptables-mod-u32, Sources
network---firewalliptables-nft1.8.7-7libc, kmod-ipt-core, xtables-nftpackages:pkgdata:iptables-nft, Extra iptables nftables nft binaries.
iptables-nft
iptables-nft-restore
iptables-nft-save
iptables-translate
iptables-restore-translate

1kB0kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-nft, Bug reportspackages:pkgdata:iptables-nft, Sources
network---firewalliptables-zz-legacy1.8.7-7libc, librt, libpthread, xtables-legacypackages:pkgdata:iptables-zz-legacy, IP firewall administration tool.

Matches:
- icmp
- tcp
- udp
- comment
- conntrack
- limit
- mac
- mark
- multiport
- set
- state
- time

Targets:
- ACCEPT
- CT
- DNAT
- DROP
- REJECT
- FLOWOFFLOAD
- LOG
- MARK
- MASQUERADE
- REDIRECT
- SET
- SNAT
- TCPMSS

Tables:
- filter
- mangle
- nat
- raw


1kB0kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-zz-legacy, Bug reportspackages:pkgdata:iptables-zz-legacy, Sources
network---firewalliptaccount3.21-1libc, iptables, iptables-mod-accountpackages:pkgdata:iptaccount, iptables-mod-account control utility

5kB4kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptaccount, Bug reportspackages:pkgdata:iptaccount, Sources
network---firewalliptgeoip3.21-1libc, iptables, iptables-mod-geoip, perl, perlbase-getopt, perlbase-io, perl-text-csv_xs, perl-net-cidr-lite, wget-ssl, gzippackages:pkgdata:iptgeoip, iptables-mod-geoip support scripts for MaxMind GeoIP databases

2kB2kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptgeoip, Bug reportspackages:pkgdata:iptgeoip, Sources
network---firewallip6tables-nft1.8.7-7libc, kmod-ip6tables, xtables-nftpackages:pkgdata:ip6tables-nft, Extra ip6tables nftables nft binaries.
ip6tables-nft
ip6tables-nft-restore
ip6tables-nft-save
ip6tables-translate
ip6tables-restore-translate

1kB0kBGPL-2.0OpenWrt teampackages:pkgdata:ip6tables-nft, Bug reportspackages:pkgdata:ip6tables-nft, Sources
network---firewallip6tables-zz-legacy1.8.7-7libc, kmod-ip6tables, xtables-legacypackages:pkgdata:ip6tables-zz-legacy, IPv6 firewall administration tool

1kB0kBGPL-2.0OpenWrt teampackages:pkgdata:ip6tables-zz-legacy, Bug reportspackages:pkgdata:ip6tables-zz-legacy, Sources
network---firewalliptables-mod-fuzzy3.21-1libc, iptables, kmod-ipt-fuzzypackages:pkgdata:iptables-mod-fuzzy, fuzzy iptables extension

2kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-fuzzy, Bug reportspackages:pkgdata:iptables-mod-fuzzy, Sources
network---firewalliptables-mod-dnetmap3.21-1libc, iptables, kmod-ipt-dnetmappackages:pkgdata:iptables-mod-dnetmap, DNETMAP iptables extension

3kB2kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-dnetmap, Bug reportspackages:pkgdata:iptables-mod-dnetmap, Sources
network---firewalliptables-mod-iprange1.8.7-7libc, libxtables12, kmod-ipt-iprangepackages:pkgdata:iptables-mod-iprange, iptables extensions for matching ip ranges.

Matches:
- iprange


3kB2kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-iprange, Bug reportspackages:pkgdata:iptables-mod-iprange, Sources
network---firewalliptables-mod-length23.21-1libc, iptables, kmod-ipt-length2packages:pkgdata:iptables-mod-length2, length2 iptables extension

2kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-length2, Bug reportspackages:pkgdata:iptables-mod-length2, Sources
network---firewalliptables-mod-clusterip1.8.7-7libc, libxtables12, kmod-ipt-clusterippackages:pkgdata:iptables-mod-clusterip, iptables extensions for CLUSTERIP.
The CLUSTERIP target allows you to build load-balancing clusters of
network servers without having a dedicated load-balancing
router/server/switch.

If you select it, it enables kmod-ipt-clusterip.

see `iptables -j CLUSTERIP --help` for more information.

3kB2kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-clusterip, Bug reportspackages:pkgdata:iptables-mod-clusterip, Sources
network---firewalliptables-mod-lua3.21-1libc, iptables, kmod-ipt-luapackages:pkgdata:iptables-mod-lua, Lua PacketScript iptables extension

3kB2kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-lua, Bug reportspackages:pkgdata:iptables-mod-lua, Sources
network---firewalliptables-mod-nflog1.8.7-7libc, libxtables12, kmod-nfnetlink-log, kmod-ipt-nflogpackages:pkgdata:iptables-mod-nflog, iptables extension for user-space logging via NFNETLINK.

Includes:
- libxt_NFLOG


3kB2kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-nflog, Bug reportspackages:pkgdata:iptables-mod-nflog, Sources
network---firewalliptables-mod-nfqueue1.8.7-7libc, libxtables12, kmod-nfnetlink-queue, kmod-ipt-nfqueuepackages:pkgdata:iptables-mod-nfqueue, iptables extension for user-space queuing via NFNETLINK.

Includes:
- libxt_NFQUEUE


3kB3kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-nfqueue, Bug reportspackages:pkgdata:iptables-mod-nfqueue, Sources
network---firewalliptables-mod-physdev1.8.7-7libc, librt, libpthread, libxtables12, kmod-ipt-physdevpackages:pkgdata:iptables-mod-physdev, The iptables physdev match.

2kB2kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-physdev, Bug reportspackages:pkgdata:iptables-mod-physdev, Sources
network---firewalliptables-mod-proto3.21-1libc, iptables, kmod-ipt-protopackages:pkgdata:iptables-mod-proto, PROTO iptables extension

2kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-proto, Bug reportspackages:pkgdata:iptables-mod-proto, Sources
network---firewalliptables-mod-chaos3.21-1libc, iptables, kmod-ipt-chaospackages:pkgdata:iptables-mod-chaos, CHAOS iptables extension

2kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-chaos, Bug reportspackages:pkgdata:iptables-mod-chaos, Sources
network---firewalliptables-mod-condition3.21-1libc, iptables, kmod-ipt-conditionpackages:pkgdata:iptables-mod-condition, Condition iptables extension

2kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-condition, Bug reportspackages:pkgdata:iptables-mod-condition, Sources
network---firewalliptables-mod-delude3.21-1libc, iptables, kmod-ipt-deludepackages:pkgdata:iptables-mod-delude, DELUDE iptables extension

1kB1kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-delude, Bug reportspackages:pkgdata:iptables-mod-delude, Sources
network---firewallebtables-legacy2018-06-27-48cff25d-1libc, kmod-ebtablespackages:pkgdata:ebtables-legacy, The ebtables program is a filtering tool for a bridging firewall. The
filtering is focussed on the Link Layer Ethernet frame fields. Apart
from filtering, it also gives the ability to alter the Ethernet MAC
addresses and implement a brouter.

75kB74kBGPL-2.0OpenWrt teampackages:pkgdata:ebtables-legacy, Bug reportspackages:pkgdata:ebtables-legacy, Sources
network---firewalliptables-mod-ipv4options3.21-1libc, librt, libpthread, iptables, kmod-ipt-ipv4optionspackages:pkgdata:iptables-mod-ipv4options, ipv4options iptables extension

3kB2kBGPL-2.0Jo-Philipp Wichpackages:pkgdata:iptables-mod-ipv4options, Bug reportspackages:pkgdata:iptables-mod-ipv4options, Sources
network---firewalliptables-mod-tee1.8.7-7libc, libxtables12, kmod-ipt-teepackages:pkgdata:iptables-mod-tee, TEE iptables extensions.

Targets:
- TEE


2kB2kBGPL-2.0OpenWrt teampackages:pkgdata:iptables-mod-tee, Bug reportspackages:pkgdata:iptables-mod-tee, Sources
network---firewallip6tables-mod-nat1.8.7-7libc, libxtables12, kmod-ipt-nat6packages:pkgdata:ip6tables-mod-nat, iptables extensions for IPv6-NAT targets.

2kB1kBGPL-2.0OpenWrt teampackages:pkgdata:ip6tables-mod-nat, Bug reportspackages:pkgdata:ip6tables-mod-nat, Sources
network---firewallsnort33.1.18.0-1libc, libstdcpp6, libdaq3, libdnet, libopenssl1.1, libpcap1, libpcre, libpthread, libuuid1, zlib, libhwloc, libtirpc, luajit, libatomic1Snort is an open source network intrusion detection and prevention system.
It is capable of performing real-time traffic analysis, alerting, blocking
and packet logging on IP networks. It utilizes a combination of protocol
analysis and pattern matching in order to detect anomalies, misuse and
attacks.

1536kB1560kBGPL-2.0-onlyW. Michael PetulloBug reportsSources
network---firewallconntrack1.4.8-1libc, libnetfilter-conntrack3, libnetfilter-cttimeout1, libnetfilter-cthelper0, libnetfilter-queue1Conntrack is a userspace command line program targeted at system
administrators. It enables them to view and manage the in-kernel
connection tracking state table.

26kB25kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
network---firewallconntrackd1.4.8-1libc, librt, libpthread, libnetfilter-conntrack3, libnetfilter-cttimeout1, libnetfilter-cthelper0, libnetfilter-queue1Conntrackd can replicate the status of the connections that are
currently being processed by your stateful firewall based on Linux.
Conntrackd can also run as statistics daemon.

69kB68kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
network---firewallfwknop2.6.10-7libc, librt, libpthread, libfkoFwknop implements an authorization scheme known as Single Packet Authorization
(SPA) for Linux systems running iptables. This mechanism requires only a
single encrypted and non-replayed packet to communicate various pieces of
information including desired access through an iptables policy. The main
application of this program is to use iptables in a default-drop stance to
protect services such as SSH with an additional layer of security in order to
make the exploitation of vulnerabilities (both 0-day and unpatched code) much
more difficult.
This package contains the fwknop client.

30kB29kBGPL-2.0-or-laterJonathan BennettBug reportsSources
network---firewallfwknopd2.6.10-7libc, librt, libpthread, iptables, libfko, libpcap1Fwknop implements an authorization scheme known as Single Packet Authorization
(SPA) for Linux systems running iptables. This mechanism requires only a
single encrypted and non-replayed packet to communicate various pieces of
information including desired access through an iptables policy. The main
application of this program is to use iptables in a default-drop stance to
protect services such as SSH with an additional layer of security in order to
make the exploitation of vulnerabilities (both 0-day and unpatched code) much
more difficult.
This package contains the fwknop daemon.

58kB57kBGPL-2.0-or-laterJonathan BennettBug reportsSources
network---firewallshorewall-core5.2.8-2libc, librt, libpthreadThe Shoreline Firewall, is high-level tool for configuring Netfilter.
This package provides the core Shorewall libraries installed in /usr/share/shorewall/,
which are required for the rest of the Shorewall packages to work.

35kB34kBGPL-2.0-or-laterWillem van den AkkerBug reportsSources
network---firewallshorewall-lite5.2.8-2libc, ip, iptables, shorewall-coreThe Shoreline Firewall, is high-level tool for configuring Netfilter.

Shorewall allows for central administration of multiple IPv4 firewalls
through use of Shorewall lite. The full Shorewall product is installed
on a central administrative system where compiled Shorewall scripts are
generated. These scripts are copied to the firewall systems where they
run under the control of Shorewall-lite.

Note: This is the IPv4 implementation of Shorewall.

4kB3kBGPL-2.0-or-laterWillem van den AkkerBug reportsSources
network---firewallshorewall5.2.8-2libc, ip, iptables, kmod-ipt-hashlimit, kmod-ipt-raw, iptables-mod-hashlimit, shorewall-core, perl, perlbase-autoloader, perlbase-autouse, perlbase-dynaloader, perlbase-digest, perlbase-findbin, perlbase-getopt, perlbase-hashThe Shoreline Firewall, is high-level tool for configuring Netfilter.

Shorewall allows for central administration of multiple IPv4 firewalls.
This is the full Shorewall product which will compile Shorewall scripts.
It is not recommended to run it on a low memory system.

Note: This is the IPv4 implementation of Shorewall.
This full Shorewal packages also installs Perl which can make the image big (about +2M).

413kB411kBGPL-2.0-or-laterWillem van den AkkerBug reportsSources
network---firewallshorewall6-lite5.2.8-3libc, ip, ip6tables, shorewall-coreThe Shoreline Firewall, is high-level tool for configuring Netfilter.

Shorewall6 allows for central administration of multiple IPv6 firewalls
through use of Shorewall6 lite. The full Shorewall6 product is installed
on a central administrative system where compiled Shorewall6 scripts are
generated. These scripts are copied to the firewall systems where they
run under the control of Shorewall6-lite.

Note: This is the IPv6 implementation of Shorewall.

4kB3kBGPL-2.0-or-laterWillem van den AkkerBug reportsSources
network---firewallshorewall65.2.8-3libc, ip, ip6tables, kmod-ipt-hashlimit, kmod-ipt-raw6, iptables-mod-hashlimit, shorewall-core, perl, perlbase-autoloader, perlbase-autouse, perlbase-dynaloader, perlbase-digest, perlbase-findbin, perlbase-getopt, perlbase-hashThe Shoreline Firewall, is high-level tool for configuring Netfilter.

Shorewall allows for central administration of multiple IPv6 firewalls.
This is the full Shorewall product which will compile Shorewall scripts
It is not recommended to run it on a low memory system.

Note: This is the IPv6 implementation of Shorewall.
This full Shorewal packages also installs Perl which can make the image big (about +2M).

93kB92kBGPL-2.0-or-laterWillem van den AkkerBug reportsSources
network---firewallshorewall5.2.8-2libc, ip, iptables, kmod-ipt-hashlimit, kmod-ipt-raw, iptables-mod-hashlimit, shorewall-core, perl, perlbase-autoloader, perlbase-autouse, perlbase-dynaloader, perlbase-digest, perlbase-findbin, perlbase-getopt, perlbase-hashpackages:pkgdata:shorewall, The Shoreline Firewall, is high-level tool for configuring Netfilter.

Shorewall allows for central administration of multiple IPv4 firewalls.
This is the full Shorewall product which will compile Shorewall scripts.
It is not recommended to run it on a low memory system.

Note: This is the IPv4 implementation of Shorewall.
This full Shorewal packages also installs Perl which can make the image big (about +2M).

413kB411kBGPL-2.0-or-laterWillem van den Akkerpackages:pkgdata:shorewall, Bug reportspackages:pkgdata:shorewall, Sources
network---firewallfwknop2.6.10-7libc, librt, libpthread, libfkopackages:pkgdata:fwknop, Fwknop implements an authorization scheme known as Single Packet Authorization
(SPA) for Linux systems running iptables. This mechanism requires only a
single encrypted and non-replayed packet to communicate various pieces of
information including desired access through an iptables policy. The main
application of this program is to use iptables in a default-drop stance to
protect services such as SSH with an additional layer of security in order to
make the exploitation of vulnerabilities (both 0-day and unpatched code) much
more difficult.
This package contains the fwknop client.

30kB29kBGPL-2.0-or-laterJonathan Bennettpackages:pkgdata:fwknop, Bug reportspackages:pkgdata:fwknop, Sources
network---firewallfwknopd2.6.10-7libc, librt, libpthread, iptables, libfko, libpcap1packages:pkgdata:fwknopd, Fwknop implements an authorization scheme known as Single Packet Authorization
(SPA) for Linux systems running iptables. This mechanism requires only a
single encrypted and non-replayed packet to communicate various pieces of
information including desired access through an iptables policy. The main
application of this program is to use iptables in a default-drop stance to
protect services such as SSH with an additional layer of security in order to
make the exploitation of vulnerabilities (both 0-day and unpatched code) much
more difficult.
This package contains the fwknop daemon.

58kB57kBGPL-2.0-or-laterJonathan Bennettpackages:pkgdata:fwknopd, Bug reportspackages:pkgdata:fwknopd, Sources
network---firewalliptables-mod-rtpengine9.5.3.2-3libc, librt, libpthread, libxtables12Sipwise rtpengine iptables extension

2kB1kBGPL-3.0Sebastian KemperBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun