This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network'

SınıfAdVersiyonBağımlılıklar ...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
network464xlat13libc, kmod-nat46, ip464xlat provides support to deploy limited IPv4 access services to mobile
and wireline IPv6-only edge networks without encapsulation (RFC6877)

5kB4kBGPL-2.0Hans DedeckerBug reportsSources
network464xlat13libc, kmod-nat46, ippackages:pkgdata:464xlat, 464xlat provides support to deploy limited IPv4 access services to mobile
and wireline IPv6-only edge networks without encapsulation (RFC6877)

5kB4kBGPL-2.0Hans Dedeckerpackages:pkgdata:464xlat, Bug reportspackages:pkgdata:464xlat, Sources
networkUDPspeeder20210116.0-3libc, libstdcpp6, librt, libatomic1A Tunnel which Improves your Network Quality on a High-latency Lossy Link by using Forward Error Correction,for All Traffics(TCP/UDP/ICMP)

72kB71kBMITNishant SharmaBug reportsSources
networkmikrotik-btest0.5.1-1libc, libpthread, librtA bandwidth test client compatible with Mikrotik's RouterOS BTest server.

8kB7kBGPLv3Roger Pueyo CentellesBug reportsSources
networkacme3.0.6-3libc, wget-ssl, ca-bundle, openssl-util, socatA client for issuing Letsencrypt certificates.

54kB53kBGPL-3.0-onlyToke Høiland-JørgensenBug reportsSources
networkacme3.0.6-3libc, wget-ssl, ca-bundle, openssl-util, socatpackages:pkgdata:acme, A client for issuing Letsencrypt certificates.

54kB53kBGPL-3.0-onlyToke Høiland-Jørgensenpackages:pkgdata:acme, Bug reportspackages:pkgdata:acme, Sources
networklibcurl48.4.0-1libc, librt, libpthread, libmbedtls12, libnghttp2-14, ca-bundleA client-side URL transfer library

155kB154kBMITStan GrishinBug reportsSources
networkdnscrypt-proxy22.1.2-1libc, ca-bundleA flexible DNS proxy, with support for modern encrypted DNS protocols
such as DNSCrypt v2 and DNS-over-HTTPS.

3811kB3820kBISCJosef SchlehoferBug reportsSources
networkdnscrypt-proxy22.1.2-1libc, ca-bundlepackages:pkgdata:dnscrypt-proxy2, A flexible DNS proxy, with support for modern encrypted DNS protocols
such as DNSCrypt v2 and DNS-over-HTTPS.

3811kB3820kBISCJosef Schlehoferpackages:pkgdata:dnscrypt-proxy2, Bug reportspackages:pkgdata:dnscrypt-proxy2, Sources
networkgolang-github-jedisct1-dnscrypt-proxy2-dev2.1.2-1libc, ca-bundleA flexible DNS proxy, with support for modern encrypted DNS protocols
such as DNSCrypt v2 and DNS-over-HTTPS.

This package provides the source files for the client/bridge program.

5992kB6123kBISCJosef SchlehoferBug reportsSources
networkradsecproxy1.9.0-3libc, libopenssl1.1, libpthread, libnettle8A generic radius proxy for UDP/TLS (RadSec)

62kB61kBBSD-3-CLAUSEToke Høiland-JørgensenBug reportsSources
networkproxychains-ng4.16-1libc, librt, libpthreadA hook preloader that allows to redirect TCP traffic of
existing dynamically linked programs through one or more
SOCKS or HTTP proxies.

21kB20kBGPL-2.0-or-laterDaniel BermondBug reportsSources
networkrssileds3libc, libiwinfo20210430, libnl-tiny1, libubox20220515, libuci20130104A small process written in C to update the signal-strength indicator LEDs

4kB3kBDaniel GolleBug reportsSources
networkfakeidentd2.6-2libcA static secure identd, only one source file.

5kB4kBGPL-2.0-or-laterDaniel GimpelevichBug reportsSources
networkfakeidentd2.6-2libcpackages:pkgdata:fakeidentd, A static secure identd, only one source file.

5kB4kBGPL-2.0-or-laterDaniel Gimpelevichpackages:pkgdata:fakeidentd, Bug reportspackages:pkgdata:fakeidentd, Sources
networkmini_snmpd1.6-3libc, jsonfilter, ubus, procd, uboxA tiny SNMP server for embedded systems

26kB25kBGPL-2.0Marcin JurkowskiBug reportsSources
networkbpftool-minimal2022-03-08-04c465fd-1libc, libelf1A tool for inspection and simple manipulation of eBPF programs and maps.

159kB158kBGPL-2.0-only OR BSD-2-ClauseTony AmbardarBug reportsSources
networkbpftool-minimal2022-03-08-04c465fd-1libc, libelf1packages:pkgdata:bpftool-minimal, A tool for inspection and simple manipulation of eBPF programs and maps.

159kB158kBGPL-2.0-only OR BSD-2-ClauseTony Ambardarpackages:pkgdata:bpftool-minimal, Bug reportspackages:pkgdata:bpftool-minimal, Sources
networkbpftool-full2022-03-08-04c465fd-1libc, librt, libpthread, libelf1, libbfd, libopcodesA tool for inspection and simple manipulation of eBPF programs and maps.
This full version uses libbfd and libopcodes to support disassembly of
eBPF programs and jited code.

132kB131kBGPL-2.0-only OR BSD-2-ClauseTony AmbardarBug reportsSources
networkbpftool-full2022-03-08-04c465fd-1libc, librt, libpthread, libelf1, libbfd, libopcodespackages:pkgdata:bpftool-full, A tool for inspection and simple manipulation of eBPF programs and maps.
This full version uses libbfd and libopcodes to support disassembly of
eBPF programs and jited code.

132kB131kBGPL-2.0-only OR BSD-2-ClauseTony Ambardarpackages:pkgdata:bpftool-full, Bug reportspackages:pkgdata:bpftool-full, Sources
networktravelmate2.1.0-1libc, iwinfo, jshn, jsonfilter, curl, ca-bundleA wlan connection manager for travel router.
Please see https://github.com/openwrt/packages/blob/master/net/travelmate/files/README.md for further information.


16kB15kBGPL-3.0-or-laterDirk BrenkenBug reportsSources
networkuradvd2021-09-14-9b0da60e-2libcAdvertise an IPv6 prefix/route via SLAAC.

7kB6kBBSD-2-ClauseMoritz WarningBug reportsSources
networkahcpd0.53-3libc, ip, librtAhcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
Configuration Protocol (AHCP). AHCP is designed for wireless mesh
networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
also be used on wired networks.

23kB22kBMITGabriel KerneisBug reportsSources
networkahcpd0.53-3libc, ip, librtpackages:pkgdata:ahcpd, Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
Configuration Protocol (AHCP). AHCP is designed for wireless mesh
networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
also be used on wired networks.

23kB22kBMITGabriel Kerneispackages:pkgdata:ahcpd, Bug reportspackages:pkgdata:ahcpd, Sources
networkapinger2015-04-09-78eb3287-3libcAlarm Pinger (apinger) is a little tool which monitors various IP devices by
simple ICMP echo requests. There are various other tools, that can do this,
but most of them are shell or perl scripts, spawning many processes, thus much
CPU-expensive, especially when one wants continuous monitoring and fast
response on target failure. Alarm Pinger is a single program written in C, so
it doesn't need much CPU power even when monitoring many targets with frequent
probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested
on Linux and FreeBSD.

31kB30kBGPL-2.0-onlyAlex SamorukovBug reportsSources
networkapinger2015-04-09-78eb3287-3libcpackages:pkgdata:apinger, Alarm Pinger (apinger) is a little tool which monitors various IP devices by
simple ICMP echo requests. There are various other tools, that can do this,
but most of them are shell or perl scripts, spawning many processes, thus much
CPU-expensive, especially when one wants continuous monitoring and fast
response on target failure. Alarm Pinger is a single program written in C, so
it doesn't need much CPU power even when monitoring many targets with frequent
probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested
on Linux and FreeBSD.

31kB30kBGPL-2.0-onlyAlex Samorukovpackages:pkgdata:apinger, Bug reportspackages:pkgdata:apinger, Sources
networkstatic-neighbor-reports1-2libc, libuci-lua, libubus-lua, luaAllows to configure static neighbor reports for hostapd interfaces.

These neighbor reports are avilable to clients using IEEE 802.11k.

1kB0kBGPL-2.0-onlyDavid BauerBug reportsSources
networkstatic-neighbor-reports1-2libc, libuci-lua, libubus-lua, luapackages:pkgdata:static-neighbor-reports, Allows to configure static neighbor reports for hostapd interfaces.

These neighbor reports are avilable to clients using IEEE 802.11k.

1kB0kBGPL-2.0-onlyDavid Bauerpackages:pkgdata:static-neighbor-reports, Bug reportspackages:pkgdata:static-neighbor-reports, Sources
networkiotivity-example-garage1.2.1-2libc, iotivity, iotivity-cpp, iotivity-resource-directory-libAn IoTivity example application

58kB58kBApache-2.0Hauke MehrtensBug reportsSources
networknetdiscover0.3-pre-beta7-2libc, libpcap1, libnet-1.2.x, libpthreadAn active/passive address reconnaissance tool

286kB290kBGPL-2.0Mislav NovakovicBug reportsSources
networklibavahi-nodbus-support0.8-8libc, libpthreadAvahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
implementation (library). It facilitates
service discovery on a local network -- this means that
you can plug your laptop or computer into a network and
instantly be able to view other people who you can chat with,
find printers to print to or find files being shared.
This kind of technology is already found in MacOS X
(branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
and is very convenient.
.
The libavahi package contains the mDNS/DNS-SD shared libraries,
used by other programs. Specifically, it provides
libavahi-core and libavahi-common libraries.
.
Selecting this package modifies the build configuration
so that avahi packages are built without support for D-BUS enabled;
it does not generate a separate binary of its own.

80kB79kBLGPL-2.1-or-laterTed HessBug reportsSources
networklibavahi-dbus-support0.8-8libc, dbusAvahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
implementation (library). It facilitates
service discovery on a local network -- this means that
you can plug your laptop or computer into a network and
instantly be able to view other people who you can chat with,
find printers to print to or find files being shared.
This kind of technology is already found in MacOS X
(branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
and is very convenient.
.
The libavahi package contains the mDNS/DNS-SD shared libraries,
used by other programs. Specifically, it provides
libavahi-core and libavahi-common libraries.
.
The libavahi-dbus-support package enables
D-Bus support in avahi, needed to support
the libavahi-client library and avahi-utils.
.
Selecting this package modifies the build configuration
so that avahi packages are built with support for D-BUS enabled;
it does not generate a separate binary of its own.
It also automatically adds the D-Bus package to the build.
libavahi-dbus-support is selected automatically if you select
libavahi-client or avahi-utils.

80kB79kBLGPL-2.1-or-laterTed HessBug reportsSources
networkbwping2.5-1libcBWPing is a tool to measure bandwidth and response times between two
hosts using Internet Control Message Protocol (ICMP) echo request/echo
reply mechanism. It does not require any special software on the remote
host. The only requirement is the ability to respond on ICMP echo request
messages. BWPing supports both IPv4 and IPv6 networks.

8kB7kBBSD-2-ClauseOleg DerevenetzBug reportsSources
networkbwping2.5-1libcpackages:pkgdata:bwping, BWPing is a tool to measure bandwidth and response times between two
hosts using Internet Control Message Protocol (ICMP) echo request/echo
reply mechanism. It does not require any special software on the remote
host. The only requirement is the ability to respond on ICMP echo request
messages. BWPing supports both IPv4 and IPv6 networks.

8kB7kBBSD-2-ClauseOleg Derevenetzpackages:pkgdata:bwping, Bug reportspackages:pkgdata:bwping, Sources
networkbwm-ng0.6.3-1libcBandwidth Monitor NG is a small and simple console-based live
network and disk io bandwidth monitor.

11kB10kBGPL2-2.0Julen Landa AlustizaBug reportsSources
networkbwm-ng0.6.3-1libcpackages:pkgdata:bwm-ng, Bandwidth Monitor NG is a small and simple console-based live
network and disk io bandwidth monitor.

11kB10kBGPL2-2.0Julen Landa Alustizapackages:pkgdata:bwm-ng, Bug reportspackages:pkgdata:bwm-ng, Sources
networkbeanstalkd1.9-2libc, librt, libpthreadBeanstalk is a simple, fast work queue.

22kB21kBMITPhilip PrindevilleBug reportsSources
networkbeanstalkd1.9-2libc, librt, libpthreadpackages:pkgdata:beanstalkd, Beanstalk is a simple, fast work queue.

22kB21kBMITPhilip Prindevillepackages:pkgdata:beanstalkd, Bug reportspackages:pkgdata:beanstalkd, Sources
networkremserial1.4-2libcBridge TCP/IP port with a device

6kB5kBGPL-2.0-or-laterNuno GoncalvesBug reportsSources
networkremserial1.4-2libcpackages:pkgdata:remserial, Bridge TCP/IP port with a device

6kB5kBGPL-2.0-or-laterNuno Goncalvespackages:pkgdata:remserial, Bug reportspackages:pkgdata:remserial, Sources
networkcifsmount6.11-2libc, kmod-fs-cifsCIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networkcifsmount6.11-2libc, kmod-fs-cifspackages:pkgdata:cifsmount, CIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainerspackages:pkgdata:cifsmount, Bug reportspackages:pkgdata:cifsmount, Sources
networkrpcapd1.10.1-4libc, libpcap1Capture daemon to be controlled by a remote libpcap application

121kB120kBBSD-3-ClauseFelix FietkauBug reportsSources
networkseafile-ccnet7.1.5-1libc, glib2, jansson4, libevent2-7, libmariadb3, libopenssl1.1, libpthread, libsearpc, libsqlite3-0, libuuid1Ccnet is a framework for writing networked applications in C.

137kB137kBAGPL-3.0-onlyAlexandru Ardelean, Jeffery To,Bug reportsSources
networkvallumd0.2.0-1libc, ca-bundle, ipset, libmosquitto, libopenssl1.1Centralized or distributed blacklist

5kB5kBGPL-3.0Stijn TintelBug reportsSources
networkvallumd0.2.0-1libc, ca-bundle, ipset, libmosquitto, libopenssl1.1packages:pkgdata:vallumd, Centralized or distributed blacklist

5kB5kBGPL-3.0Stijn Tintelpackages:pkgdata:vallumd, Bug reportspackages:pkgdata:vallumd, Sources
networkpingcheck2022-03-01-1libc, librt, libpthread, libubus20220601, libuci20130104Checks by using “ping” (ICMP echo) or by opening connections to TCP port 80
whether a configured host (normally on the internet) can be reached via a
specific interface. Then makes this information available via ubus and triggers
“online” and “offline” scripts.

10kB9kBGPL-2.0-or-laterBruno RandolfBug reportsSources
networklynx2.8.9rel.1-2libc, librt, libpthread, libncursesw6, zlib, libopenssl1.1, ca-bundleClassic non-graphical (text-mode) web browser

374kB377kBGPL-2.0Leonid EsmanBug reportsSources
networkcshark2020-07-22-c0d32fb6-2libc, libjson-c5, libpcap1, libuci20130104, libubox20220515, libuclient20201210, libustream-mbedtls20201210CloudShark capture tool

8kB7kBBSD-2-ClauseLuka PerkovBug reportsSources
networkcshark2020-07-22-c0d32fb6-2libc, libjson-c5, libpcap1, libuci20130104, libubox20220515, libuclient20201210, libustream-mbedtls20201210packages:pkgdata:cshark, CloudShark capture tool

8kB7kBBSD-2-ClauseLuka Perkovpackages:pkgdata:cshark, Bug reportspackages:pkgdata:cshark, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun