This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network'

SınıfAdVersiyon Bağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
networkiputils-ping20211215-1libc, librt, libpthread, kmod-crypto-md5Send ICMP_ECHOREQUEST packets to IP hosts and report on replies

25kB24kBBSD-3-ClauseNoah MeyerhansBug reportsSources
networkiputils-ping620101006-1libc, libsspProgram ping6 from iputils.
Sends ICMP ECHO_REQUEST to network hosts (IPv6).

11kB11kBGPL-2.0+Jo-Philipp WichBug reportsSources
networkiputils-tftpd20210202-1libc, librt, libpthreadTrivial File Transfer Protocol server

7kB6kBBSD-3-ClauseNoah MeyerhansBug reportsSources
networkiputils-tracepath20211215-1libctrace network path to a host, discovering PMTU

7kB6kBBSD-3-ClauseNoah MeyerhansBug reportsSources
networkiputils-tracepath620101006-1libcProgram tracepath6 from iputils.
Traces path to a network host discovering MTU along this path (IPv6).

5kB4kBGPL-2.0+Jo-Philipp WichBug reportsSources
networkiputils-traceroute620101006-1libc, libsspProgram traceroute6 from iputils.
Traces path to a network host (IPv6).

5kB4kBGPL-2.0+Jo-Philipp WichBug reportsSources
networkiw5.16-1libc, libnl-tiny1cfg80211 interface configuration utility

48kB48kBGPL-2.0Felix FietkauBug reportsSources
networkixp4xx-microcode2.4-2libcThis package contains the microcode needed to use the network engines in IXP4xx CPUs

21kB20kBLEDE teamBug reportsSources
networkjool-tools4.1.5-1libc, libnl200, libxtables12Jool is an Open Source SIIT and NAT64 for Linux.

This package provides the userspace control programs for Jool.

122kB121kBGPL-2.0-onlycommon packages maintainersBug reportsSources
networkkeepalived2.2.7-6libc, librt, libpthread, libnl-genl200, libmagic, libkmod, libnftnl11, kmod-macvlan, libnl-route200, libnfnetlink0, libopenssl1.1, libip4tc2, libip6tc2, libxtables12, libipset13VRRP with failover and monitoring daemon for Linux Virtual Server (LVS) clusters.

506kB508kBGPL-2.0-or-laterBen Kelly,,Bug reportsSources
networkknxd0.14.53-2libc, librt, libpthread, libusb-1.0-0, libev, libfmtEIB KNX Daemon

231kB230kBGPL-2.0-or-laterOthmar TrunigerBug reportsSources
networkkplex1.4-3libc, librt, libpthreadKplex is a program for combining and routing NMEA-0183 data to and from multiple
sources and destinations. kplex inputs and outputs may be any of Serial lines,
Pseudo Terminals (ptys), Network Interfaces and Files.

31kB30kBGPL-3.0-or-laterNuno GoncalvesBug reportsSources
networkkrb5-client1.19.2-2libc, librt, libpthread, krb5-libsKerberos 5 Client

38kB37kBMITW. Michael PetulloBug reportsSources
networkkrb5-libs1.19.2-2libc, librt, libpthread, libncurses6, libss2, libcomerr0Kerberos 5 Shared Libraries

564kB573kBMITW. Michael PetulloBug reportsSources
networkkrb5-server1.19.2-2libc, librt, libpthread, krb5-libsKerberos 5 Server

96kB95kBMITW. Michael PetulloBug reportsSources
networklibavahi-dbus-support0.8-8libc, dbusAvahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
implementation (library). It facilitates
service discovery on a local network -- this means that
you can plug your laptop or computer into a network and
instantly be able to view other people who you can chat with,
find printers to print to or find files being shared.
This kind of technology is already found in MacOS X
(branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
and is very convenient.
.
The libavahi package contains the mDNS/DNS-SD shared libraries,
used by other programs. Specifically, it provides
libavahi-core and libavahi-common libraries.
.
The libavahi-dbus-support package enables
D-Bus support in avahi, needed to support
the libavahi-client library and avahi-utils.
.
Selecting this package modifies the build configuration
so that avahi packages are built with support for D-BUS enabled;
it does not generate a separate binary of its own.
It also automatically adds the D-Bus package to the build.
libavahi-dbus-support is selected automatically if you select
libavahi-client or avahi-utils.

80kB79kBLGPL-2.1-or-laterTed HessBug reportsSources
networklibavahi-nodbus-support0.8-8libc, libpthreadAvahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf)
implementation (library). It facilitates
service discovery on a local network -- this means that
you can plug your laptop or computer into a network and
instantly be able to view other people who you can chat with,
find printers to print to or find files being shared.
This kind of technology is already found in MacOS X
(branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf')
and is very convenient.
.
The libavahi package contains the mDNS/DNS-SD shared libraries,
used by other programs. Specifically, it provides
libavahi-core and libavahi-common libraries.
.
Selecting this package modifies the build configuration
so that avahi packages are built without support for D-BUS enabled;
it does not generate a separate binary of its own.

80kB79kBLGPL-2.1-or-laterTed HessBug reportsSources
networklibipset6.38-1libc, libssp, kmod-ipt-ipset, libmnlIPset administration utility

30kB30kBGPL-2.0Jo-Philipp WichBug reportsSources
networklibmosquitto-nossl2.0.17-1libc, librt, libpthread, libcaresLibrary required for mosquitto's command line client tools, also for
use by any third party software that wants to communicate with _any_
MQTT server.

Should be useable for communicating with any MQTT v3.1/3.1.1/5 compatible
server, in addition to Mosquitto.
This package is built without SSL support

28kB27kBEPL-2.0Karl PalssonBug reportsSources
networklibmosquitto-ssl2.0.17-1libc, libpthread, librt, libcares, libopenssl1.1Library required for mosquitto's command line client tools, also for
use by any third party software that wants to communicate with _any_
MQTT server.

Should be useable for communicating with any MQTT v3.1/3.1.1/5 compatible
server, in addition to Mosquitto.
This package is built with SSL support

43kB42kBEPL-2.0Karl PalssonBug reportsSources
networklinknx0.0.1.38-3libc, librt, libpthread, pthsem, lua, luac, libcurl4, libesmtp, libstdcpp6KNX home automation platform

173kB173kBGPL-2.0-or-laterOthmar TrunigerBug reportsSources
networklispd0.4-2libc, libssp, librt, libopenssl, confuse, kmod-tun, uciThis packet provides support for the Locator-ID Separation Protocol.

76kB75kBGPLv2Vasileios LakafosisBug reportsSources
networkltq-adsl-app3.24.4.4-10libc, libpthread, ltq-dsl-base, libubox20220515, libubus20220601Infineon DSL CPE API for Amazon SE, Danube and Vinax.

48kB47kBBSD-3-ClauseJohn CrispinBug reportsSources
networkltq-vdsl-app4.17.18.6-38libc, libpthread, librt, ltq-dsl-base, libubox20220515, libubus20220601Userland tool needed to control Lantiq VDSL CPE

50kB49kBBSD-2-ClauseOpenWrt teamBug reportsSources
networkltq-vdsl-mei_test1.5.17.6-4libcUserland tool to directly control the mei driver, this is only needed
for test and development purposes.

48kB47kBGPL-2.0 BSD-2-ClauseJohn CrispinBug reportsSources
networksamba36-server3.6.25-12libcThe Samba software suite is a collection of programs that implements the
SMB protocol for UNIX systems, allowing you to serve files and printers to
Windows, NT, OS/2 and DOS clients. This protocol is sometimes also referred
to as the LanManager or Netbios protocol.

855kB872kBGPL-3.0Felix FietkauBug reportsSources
networkmac-telnet-client2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

13kB12kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkmac-telnet-discover2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

4kB3kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkmac-telnet-ping2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

7kB6kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkmac-telnet-server2015-09-02-37d83cbc-2libc, librt, libpthread, libubox20220515Open source MAC Telnet client and server utilities for connecting to
Mikrotik RouterOS routers and Linux machines via MAC address.

11kB10kBGPL-2.0-or-laterJo-Philipp WichBug reportsSources
networkmap-t11libc, map, kmod-nat46MAP-T configuration support

0kB0kBGPL-2.0Steven BarthBug reportsSources
networkmap7libc, kmod-ip6-tunnel, libubox20220515, libubus20220601, iptables-mod-conntrack-extra, kmod-nat46Provides support for MAP-E (RFC7597), MAP-T (RFC7599) and
Lightweight 4over6 (RFC7596) in /etc/config/network.
MAP combines address and port translation with the tunneling
of IPv4 packets over an IPv6 network

7kB7kBGPL-2.0Hans DedeckerBug reportsSources
networkmemcached1.6.9-2libc, librt, libpthread, libevent2-7Free and open source, high-performance, distributed memory object caching system

81kB80kBBSD-3-ClauseThomas HeilBug reportsSources
networkmii-tool2.10-1libc, librt, libpthreadThe mii-tool command allows you to set or autodetect the media type
or mii chipset-based ethernet devices. It traditionally had been
distributed in the net-tools package. This is a single distribution
optimized for embedded systems and fully automated cross/-sysroot-builds

6kB6kBGPL-2.0-or-laterStijn SegersBug reportsSources
networkmikrotik-btest0.5.1-1libc, libpthread, librtA bandwidth test client compatible with Mikrotik's RouterOS BTest server.

8kB7kBGPLv3Roger Pueyo CentellesBug reportsSources
networkmini_snmpd1.6-3libc, jsonfilter, ubus, procd, uboxA tiny SNMP server for embedded systems

26kB25kBGPL-2.0Marcin JurkowskiBug reportsSources
networkminimalist-pcproxy2014-12-12-2d6d1b0b-7libc, libubox20220515This package contains a daemon which can be used to forward
PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.

In and of itself, it is not very useful, but combined with hnetd+miniupnpd
it allows for control of NAT forwarding and firewall pinholes from multiple
hops away.

7kB6kBBSD-3-ClauseMarkus StenbergBug reportsSources
networkmosquitto-client-nossl2.0.17-1libc, librt, libcares, cjson, libmosquitto-nosslCommand line client tools for working with mosquitto.
This includes mosquitto_sub, mosquitto_pub, mosquitto_rr
and the mosquitto_ctrl tool.
This package is built without SSL support

50kB49kBEPL-2.0Karl PalssonBug reportsSources
networkmosquitto-client-ssl2.0.17-1libc, librt, libcares, cjson, libmosquitto-sslCommand line client tools for working with mosquitto.
This includes mosquitto_sub, mosquitto_pub, mosquitto_rr
and the mosquitto_ctrl tool.
This package is built with SSL support

73kB72kBEPL-2.0Karl PalssonBug reportsSources
networkmosquitto-nossl2.0.17-1libc, librtMosquitto is an open source (BSD licensed) message broker that implements
the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight
method of carrying out messaging using a publish/subscribe model.

This package also includes some basic support for configuring via UCI
This package is built WITHOUT SSL support.

101kB100kBEPL-2.0Karl PalssonBug reportsSources
networkmosquitto-ssl2.0.17-1libc, librt, libopenssl1.1, libwebsockets-openssl, cjsonMosquitto is an open source (BSD licensed) message broker that implements
the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight
method of carrying out messaging using a publish/subscribe model.

This package also includes some basic support for configuring via UCI
This package is built with SSL support. TLS-PSK will be included (in both
the client and broker) if OpenSSL is built with TLS-PSK support.

161kB160kBEPL-2.0Karl PalssonBug reportsSources
networkmrd62013-11-30-c805eb3325..0-2libc, libstdcpp6Multicast is becoming a major component in next generation networks, used
in several scenarios, from video broadcasting to multimedia conferencing.
In order to be implemented, new technology needs supporting hardware and
software across a set of devices and systems. MRD6 is an implementation of
a modular IPv6 Multicast Routing Framework for the Linux operating system
and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

288kB288kBGPL-2.0+Steven BarthBug reportsSources
networkmtr0.94-1libc, librt, libpthread, libncurses6mtr combines the functionality of the 'traceroute' and 'ping' programs
in a single network diagnostic tool.
As mtr starts, it investigates the network connection between the host
mtr runs on and a user-specified destination host. After it
determines the address of each network hop between the machines,
it sends a sequence ICMP ECHO requests to each one to determine the
quality of the link to each machine. As it does this, it prints
running statistics about each machine.

35kB33kBGPL-2.0-or-laterJonathan McCrohanBug reportsSources
networknbd-server3.19-2libc, librt, libpthread, glib2This package contains the network block device server.

23kB22kBGPL-2.0-or-laterMarcin JurkowskiBug reportsSources
networknbd3.19-2libc, kmod-nbdThis package contains the network block device client.

12kB11kBGPL-2.0-or-laterMarcin JurkowskiBug reportsSources
networkncp1.2.4-1libccopy files over the network

19kB18kBFREEAndreas ShimokawaBug reportsSources
networkndppd0.2.5-2libc, librt, libpthread, libstdcpp6ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
Protocol) messages between interfaces. ndppd currently only supports Neighbor
Solicitation Messages and Neighbor Advertisement Messages.

The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
are supported. No subnets. ndppd solves this by listening for Neighbor
Solicitation messages on an interface, then query the internal interfaces for
that target IP before finally sending a Neighbor Advertisement message.

30kB29kBGPL-3.0-or-laterGabriel KerneisBug reportsSources
networknetcat0.7.1-2libc, librt, libpthreadNetcat is a featured networking utility which reads and writes data across network connections, using the TCP/IP protocol.
It is designed to be a reliable “back-end” tool that can be used directly or easily driven by other programs and scripts. At the same time, it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities.

14kB13kBGPL-2.0Adam GenslerBug reportsSources
networknetdiscover0.3-pre-beta7-2libc, libpcap1, libnet-1.2.x, libpthreadAn active/passive address reconnaissance tool

286kB290kBGPL-2.0Mislav NovakovicBug reportsSources
networknetperf2.7.0-3libc, librt, libpthreadNetwork performance measurement tool

123kB122kBCustomToke Høiland-JørgensenBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun