This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network'

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
network6in428libc, kmod-sit, uclient-fetchProvides support for 6in4 tunnels in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

2kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
network6rd12libc, librt, libpthread, kmod-sitProvides support for 6rd tunnels in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

4kB3kBGPL-2.0Steven BarthBug reportsSources
network6to413libc, kmod-sitProvides support for 6to4 tunnels in /etc/config/network.
Refer to https://openwrt.org/docs/guide-user/base-system/basic-networking
configuration details.

1kB1kBGPL-2.0Jo-Philipp WichBug reportsSources
network464xlat13libc, kmod-nat46, ip464xlat provides support to deploy limited IPv4 access services to mobile
and wireline IPv6-only edge networks without encapsulation (RFC6877)

5kB4kBGPL-2.0Hans DedeckerBug reportsSources
networkacme-dnsapi3.0.6-3libc, acmeThis package provides DNS API integration for ACME (Letsencrypt) client.

149kB148kBGPL-3.0-onlyToke Høiland-JørgensenBug reportsSources
networkacme3.0.6-3libc, wget-ssl, ca-bundle, openssl-util, socatA client for issuing Letsencrypt certificates.

54kB53kBGPL-3.0-onlyToke Høiland-JørgensenBug reportsSources
networkadblock4.1.5-8libc, jshn, jsonfilter, coreutils, coreutils-sort, ca-bundle, opkgPowerful adblock solution to block ad/abuse domains via dnsmasq, unbound, named or kresd.
The script supports many domain blacklist sites plus manual black- and whitelist overrides.
Please see https://github.com/openwrt/packages/blob/master/net/adblock/files/README.md for further information.


20kB19kBGPL-3.0-or-laterDirk BrenkenBug reportsSources
networkahcpd0.53-3libc, ip, librtAhcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
Configuration Protocol (AHCP). AHCP is designed for wireless mesh
networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
also be used on wired networks.

23kB22kBMITGabriel KerneisBug reportsSources
networkalfred2022.0-4libc, libnl-tiny1, librtalfred is a user space daemon for distributing arbitrary local information
over the mesh/network in a decentralized fashion. This data can be anything
which appears to be useful - originally designed to replace the batman-adv
visualization (vis), you may distribute hostnames, phone books, administration
information, DNS information, the local weather forecast ...

alfred runs as daemon in the background of the system. A user may insert
information by using the alfred binary on the command line, or use special
programs to communicate with alfred (done via unix sockets). alfred then takes
care of distributing the local information to other alfred servers on other
nodes. This is done via IPv6 link-local multicast, and does not require any
configuration. A user can request data from alfred, and will receive the
information available from all alfred servers in the network.

25kB24kBGPL-2.0-only MITSimon WunderlichBug reportsSources
networkapcupsd-cgi3.14.14-3libc, libpthread, libgdUPS control software CGI module

29kB29kBGPL-2.0Othmar TrunigerBug reportsSources
networkapcupsd3.14.14-3libc, libpthread, libusb-compat4UPS control software

234kB234kBGPL-2.0Othmar TrunigerBug reportsSources
networkapinger2015-04-09-78eb3287-3libcAlarm Pinger (apinger) is a little tool which monitors various IP devices by
simple ICMP echo requests. There are various other tools, that can do this,
but most of them are shell or perl scripts, spawning many processes, thus much
CPU-expensive, especially when one wants continuous monitoring and fast
response on target failure. Alarm Pinger is a single program written in C, so
it doesn't need much CPU power even when monitoring many targets with frequent
probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested
on Linux and FreeBSD.

31kB30kBGPL-2.0-onlyAlex SamorukovBug reportsSources
networkbatctl2018.1-1libc, kmod-batman-adv, libnl-tiny, librtbatctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
It is an easier method for configuring batman-adv and provides some
additional tools for debugging as well. This package builds
version 2018.1 of the user space utility.

35kB34kBGPL-2.0Simon WunderlichBug reportsSources
networkbeanstalkd1.9-2libc, librt, libpthreadBeanstalk is a simple, fast work queue.

22kB21kBMITPhilip PrindevilleBug reportsSources
networkbmon4.0-1libc, libncursesw6, libnl-core200, libnl-route200, confuse, terminfobmon is a portable bandwidth monitor
and rate estimator running on various
operating systems. It supports various
input methods for different architectures.

37kB37kBMITBaptiste JonglezBug reportsSources
networkbwm-ng0.6.3-1libcBandwidth Monitor NG is a small and simple console-based live
network and disk io bandwidth monitor.

11kB10kBGPL2-2.0Julen Landa AlustizaBug reportsSources
networkchat2.4.9.git-2021-01-04-3libcThis package contains an utility to establish conversation with other PPP servers
(via a modem).

10kB9kBBSD-4-ClauseFelix FietkauBug reportsSources
networkcifsmount6.11-2libc, kmod-fs-cifsCIFS mount

13kB12kBGPL-3.0-or-latercommon packages maintainersBug reportsSources
networkcoap-server4.3.0-2libc, librt, libpthread, libcoap3Constrained Application Protocol (RFC 7252) server and resource directory server

0kB0kBGPL-2.0-or-later BSD-2-ClauseAnton GlukhovBug reportsSources
networkconserver8.2.6-1libc, libopenssl1.1Conserver is an application that allows multiple users to watch a
serial console at the same time. It can log the data, allows users
to take write-access of a console (one at a time), and has a
variety of bells and whistles to accentuate that basic
functionality. The idea is that conserver will log all your serial
traffic so you can go back and review why something crashed, look
at changes (if done on the console), or tie the console logs into a
monitoring system (just watch the logfiles it creates). With
multi-user capabilities you can work on equipment with others,
mentor, train, etc. It also does all that client-server stuff so
that, assuming you have a network connection, you can interact with
any of the equipment from home or wherever.

111kB110kBBSD-3-ClauseBjørn MorkBug reportsSources
networkdaemonlogger1.2.1-1libc, libpcap1, libdnetSoftware Network Tap

10kB10kBGPL-2.0Mirko VogtBug reportsSources
networkdarkstat3.0.719-6libc, libpcap1, zlibdarkstat is a packet sniffer that runs as a background process on a cable/DSL
router, gathers all sorts of statistics about network usage, and serves them
over HTTP.

38kB37kBGPL-2.0 BSD-ISCJean-Michel LacroixBug reportsSources
networkdhcpcd7.2.2-1libcDHCPv4, IPv6RS and DHCPv6 client with IPv4LL support
dhcpcd is a one stop network management daemon which includes
* RFC compliant DHCPv4 and DHCPv6 clients
* DHCPv6 Prefix Delegation support
* IPv4LL (aka ZeroConf) support
* ARP address conflict resolution
* Link carrier detection
* Wireless SSID profiles
* ARP ping profiles

127kB126kBBSD-2cMarko RatkajBug reportsSources
networkds-lite8libc, kmod-ip6-tunnel, resolveipProvides support for Dual-Stack Lite in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.

1kB1kBGPL-2.0Steven BarthBug reportsSources
networkesniper2.35.0-1libc, libcurl4, ca-certificatesSimple, lightweight tool for sniping eBay auctions

31kB31kBBSD-2-ClauseThomas WeißschuhBug reportsSources
networketherwake1.09-5libcYou can wake up WOL compliant Computers which have been powered down to
sleep mode or start WOL compliant Computers with a BIOS feature.
WOL is an abbreviation for Wake-on-LAN. It is a standard that allows you
to turn on a computer from another location over a network connection.
ether-wake also supports WOL passwords.

5kB5kBPeter WagnerBug reportsSources
networkethtool5.16-1libc, librt, libpthreadethtool is a small utility for examining and tuning your ethernet-based
network interface

34kB33kBGPL-2.0Felix FietkauBug reportsSources
networkfakeidentd2.6-2libcA static secure identd, only one source file.

5kB4kBGPL-2.0-or-laterDaniel GimpelevichBug reportsSources
networkfping5.0-1libcfping is a ping like program which uses the Internet Control Message Protocol
(ICMP) echo request to determine if a target host is responding. fping
differs from ping in that you can specify any number of targets on the command
line, or specify a file containing the lists of targets to ping. Instead of
sending to one target until it times out or replies, fping will send out a
ping packet and move on to the next target in a round-robin fashion.

17kB16kBBSD-4-ClauseNikil MehtaBug reportsSources
networkgnunet-conversation0.17.5-4libc, gnunet, gnunet-gns, libgst1app, libgst1audio, libgstreamer1, glib2, pulseaudio-daemon, libopus, libogg0GNUnet conversation component

39kB39kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-datastore0.17.5-4libc, gnunet, gnunet-gnsGNUnet data storage components

19kB18kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-dht-cli0.17.5-4libc, gnunetGNUnet DHT command line clients

10kB10kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-dhtcache-heap0.17.5-4libc, gnunetGNUnet heap-based dhtcache plugin

4kB3kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-dhtcache-pgsql0.17.5-4libc, gnunet, gnunet-pgsqlGNUnet PostgreSQL dhtcache plugin

5kB5kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-dhtcache-sqlite0.17.5-4libc, gnunet, gnunet-sqliteGNUnet libsqlite3 dhtcache plugin

8kB7kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-experiments0.10.2-git-20180205-b..7-1libc, libssp, gnunet, libglpkGNUnet experimental components

26kB25kBGPL-3.0Daniel GolleBug reportsSources
networkgnunet-fs-heap0.17.5-4libc, gnunet, gnunet-datastoreGNUnet heap-based filesharing plugin

5kB4kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-fs-mysql0.17.5-4libc, gnunet, gnunet-mysql, gnunet-datastoreGNUnet mySQL filesharing plugins

7kB6kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-fs-pgsql0.17.5-4libc, gnunet, gnunet-pgsql, gnunet-datastoreGNUnet PostgreSQL filesharing plugin

7kB6kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-fs-sqlite0.17.5-4libc, gnunet, gnunet-datastore, gnunet-sqliteGNUnet libsqlite3 filesharing plugin

10kB10kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-fs0.17.5-4libc, gnunet, gnunet-datastore, libextractorGNUnet file-sharing components

154kB153kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-gns-flat0.17.5-4libc, librt, libpthread, gnunet, gnunet-gnsGNUnet flat storage GNS plugins

8kB8kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-gns-pgsql0.17.5-4libc, gnunet, gnunet-pgsql, gnunet-gnsGNUnet PostgreSQL GNS plugins

8kB7kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-gns-proxy0.17.5-4libc, gnunet, gnunet-gns, gnunet-curl, libmicrohttpd-ssl, libgnutls-daneGNUnet gns-proxy component

19kB18kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-gns-sqlite0.17.5-4libc, gnunet, gnunet-gns, gnunet-sqliteGNUnet libsqlite3 gns plugins

11kB10kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-gns0.17.5-4libc, gnunet, gnunet-vpn, iptables-mod-extraGNUnet name resolution components

140kB141kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-hostlist0.17.5-4libc, gnunet, libmicrohttpd-ssl, gnunet-curl, ca-bundleGNUnet HTTP bootstrap hostlist client and server

18kB17kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-mysql0.17.5-4libc, gnunet, libmysqlclient3GNUnet mySQL backend

10kB9kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-namestore-fcfsd0.17.5-4libc, gnunet, gnunet-rest, libmicrohttpd-sslGNUnet first-come-first-serve registration server

8kB7kBAGPL-3.0Daniel GolleBug reportsSources
networkgnunet-peerstore-flat0.17.5-4libc, gnunetGNUnet flat storage peerstore plugin

5kB4kBAGPL-3.0Daniel GolleBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun