This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='network'

SınıfAd VersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
networkfping5.0-1libcpackages:pkgdata:fping, fping is a ping like program which uses the Internet Control Message Protocol
(ICMP) echo request to determine if a target host is responding. fping
differs from ping in that you can specify any number of targets on the command
line, or specify a file containing the lists of targets to ping. Instead of
sending to one target until it times out or replies, fping will send out a
ping packet and move on to the next target in a round-robin fashion.

17kB16kBBSD-4-ClauseNikil Mehtapackages:pkgdata:fping, Bug reportspackages:pkgdata:fping, Sources
networkfping5.0-1libcfping is a ping like program which uses the Internet Control Message Protocol
(ICMP) echo request to determine if a target host is responding. fping
differs from ping in that you can specify any number of targets on the command
line, or specify a file containing the lists of targets to ping. Instead of
sending to one target until it times out or replies, fping will send out a
ping packet and move on to the next target in a round-robin fashion.

17kB16kBBSD-4-ClauseNikil MehtaBug reportsSources
networkvti5libc, librt, libpthread, kmod-ip-vti, kmod-ip6-vtipackages:pkgdata:vti, Virtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre Valentinpackages:pkgdata:vti, Bug reportspackages:pkgdata:vti, Sources
networkvti5libc, librt, libpthread, kmod-ip-vti, kmod-ip6-vtiVirtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre ValentinBug reportsSources
networktcpdump4.9.3-4libc, libpcap1packages:pkgdata:tcpdump, Network monitoring and data acquisition tool

329kB328kBBSD-3-ClauseFelix Fietkaupackages:pkgdata:tcpdump, Bug reportspackages:pkgdata:tcpdump, Sources
networktcpdump4.9.3-4libc, libpcap1Network monitoring and data acquisition tool

329kB328kBBSD-3-ClauseFelix FietkauBug reportsSources
networktcpdump-mini4.9.3-4libc, libpcap1Network monitoring and data acquisition tool (minimal version)

148kB148kBBSD-3-ClauseFelix FietkauBug reportsSources
networkgeoipupdate4.9.0-1libcpackages:pkgdata:geoipupdate, The GeoIP Update program performs automatic updates of GeoIP2 and GeoIP
Legacy binary databases. CSV databases are not supported.

Users will need to update /etc/GeoIP.conf with their API key and DB
choice, currently set to country only. To update the DB, the user can
manually run the utility or set up a cron job.

This package contains the program and config file.

1956kB1959kBApache-2.0 MITMatthew Haganpackages:pkgdata:geoipupdate, Bug reportspackages:pkgdata:geoipupdate, Sources
networkgeoipupdate4.9.0-1libcThe GeoIP Update program performs automatic updates of GeoIP2 and GeoIP
Legacy binary databases. CSV databases are not supported.

Users will need to update /etc/GeoIP.conf with their API key and DB
choice, currently set to country only. To update the DB, the user can
manually run the utility or set up a cron job.

This package contains the program and config file.

1956kB1959kBApache-2.0 MITMatthew HaganBug reportsSources
networkcoap-server4.3.0-2libc, librt, libpthread, libcoap3packages:pkgdata:coap-server, Constrained Application Protocol (RFC 7252) server and resource directory server

0kB0kBGPL-2.0-or-later BSD-2-ClauseAnton Glukhovpackages:pkgdata:coap-server, Bug reportspackages:pkgdata:coap-server, Sources
networkcoap-server4.3.0-2libc, librt, libpthread, libcoap3Constrained Application Protocol (RFC 7252) server and resource directory server

0kB0kBGPL-2.0-or-later BSD-2-ClauseAnton GlukhovBug reportsSources
networksamba4-utils4.18.8-1libc, samba4-libsinstalls: smbstatus smbtree mvxattr smbtar (smbcquotas)

Utilities collection

31kB31kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-libs4.18.8-1libc, libtirpc, libreadline8, libpopt0, libcap, zlib, libgnutls, libtasn1, libuuid1, libopenssl1.1, libpthread, liburing, libpam, attr, libavahi-clientSamba 4.18.8 libs

8765kB8820kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-client4.18.8-1libc, samba4-libsinstalls: cifsdd smbclient smbget

The smbclient program implements a simple ftp-like client for accessing SMB shares

95kB95kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-server4.18.8-1libc, samba4-libsinstalls: smbd (nmbd) smbpasswd pdbedit testparm (nmblookup) (smbcacls sharesec)
(samba samba-tool ntlm_auth samba-gpupdate samba_dnsupdate samba_kcc samba_spnupdate samba_upgradedns samba_downgrade_db)

This provides the basic fileserver service and is the minimum needed to serve file shares.
HINT: https://fitzcarraldoblog.wordpress.com/2016/10/17/a-correct-method-of-configuring-samba-for-browsing-smb-shares-in-a-home-network/

243kB242kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networksamba4-admin4.18.8-1libc, librt, libpthread, samba4-libsinstalls: net smbcontrol profiles rpcclient dbwrap_tool eventlogadm
ldbadd ldbdel ldbedit ldbmodify ldbrename ldbsearch
tdbbackup tdbdump tdbrestore tdbtool

Administration tools collection

842kB847kBGPL-3.0-onlycommon packages maintainersBug reportsSources
networkltq-vdsl-app4.17.18.6-38libc, libpthread, librt, ltq-dsl-base, libubox20220515, libubus20220601Userland tool needed to control Lantiq VDSL CPE

50kB49kBBSD-2-ClauseOpenWrt teamBug reportsSources
networkproxychains-ng4.16-1libc, librt, libpthreadA hook preloader that allows to redirect TCP traffic of
existing dynamically linked programs through one or more
SOCKS or HTTP proxies.

21kB20kBGPL-2.0-or-laterDaniel BermondBug reportsSources
networkadblock4.1.5-8libc, jshn, jsonfilter, coreutils, coreutils-sort, ca-bundle, opkgpackages:pkgdata:adblock, Powerful adblock solution to block ad/abuse domains via dnsmasq, unbound, named or kresd.
The script supports many domain blacklist sites plus manual black- and whitelist overrides.
Please see https://github.com/openwrt/packages/blob/master/net/adblock/files/README.md for further information.


20kB19kBGPL-3.0-or-laterDirk Brenkenpackages:pkgdata:adblock, Bug reportspackages:pkgdata:adblock, Sources
networkadblock4.1.5-8libc, jshn, jsonfilter, coreutils, coreutils-sort, ca-bundle, opkgPowerful adblock solution to block ad/abuse domains via dnsmasq, unbound, named or kresd.
The script supports many domain blacklist sites plus manual black- and whitelist overrides.
Please see https://github.com/openwrt/packages/blob/master/net/adblock/files/README.md for further information.


20kB19kBGPL-3.0-or-laterDirk BrenkenBug reportsSources
networkjool-tools4.1.5-1libc, libnl200, libxtables12Jool is an Open Source SIIT and NAT64 for Linux.

This package provides the userspace control programs for Jool.

122kB121kBGPL-2.0-onlycommon packages maintainersBug reportsSources
networktac_plus4.0.4.28-2libcpackages:pkgdata:tac_plus, TACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built without PAM support.

42kB41kBcommon packages maintainerspackages:pkgdata:tac_plus, Bug reportspackages:pkgdata:tac_plus, Sources
networktac_plus4.0.4.28-2libcTACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built without PAM support.

42kB41kBcommon packages maintainersBug reportsSources
networktac_plus-pam4.0.4.28-2libc, libpamTACACS+ is a protocol (not TACACS or XTACACS) for authentication,
authorization and accounting (AAA) services for routers and network devices.
This package is built with PAM support.

48kB47kBcommon packages maintainersBug reportsSources
networkostiary4.0-1libc, librt, libpthreadReplay-resistent predefined remote-command trigger

16kB15kBGPL-2.0-onlyChris GeraghtyBug reportsSources
networkbmon4.0-1libc, libncursesw6, libnl-core200, libnl-route200, confuse, terminfobmon is a portable bandwidth monitor
and rate estimator running on various
operating systems. It supports various
input methods for different architectures.

37kB37kBMITBaptiste JonglezBug reportsSources
networkipip4libc, kmod-ipip, resolveippackages:pkgdata:ipip, IP in IP Tunnel config support in /etc/config/network.

1kB0kBGPL-2.0Hans Dedeckerpackages:pkgdata:ipip, Bug reportspackages:pkgdata:ipip, Sources
networkxfrm4libc, kmod-xfrm-interfacepackages:pkgdata:xfrm, XFRM IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre Valentinpackages:pkgdata:xfrm, Bug reportspackages:pkgdata:xfrm, Sources
networkxfrm4libc, kmod-xfrm-interfaceXFRM IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

1kB0kBGPL-2.0Andre ValentinBug reportsSources
networkipip4libc, kmod-ipip, resolveipIP in IP Tunnel config support in /etc/config/network.

1kB0kBGPL-2.0Hans DedeckerBug reportsSources
networksamba36-net3.6.25-12libc, libreadline, libncursesSamba 3.6 SMB/CIFS net commands

865kB866kBGPL-3.0Felix FietkauBug reportsSources
networksamba36-hotplug3.6.25-12libc, libssp, block-mountSamba 3.6 SMB/CIFS hotplug

1kB1kBGPL-3.0Felix FietkauBug reportsSources
networksamba36-client3.6.25-12libc, libreadline, libncursesSamba 3.6 SMB/CIFS client

433kB433kBGPL-3.0Felix FietkauBug reportsSources
networksamba36-server3.6.25-12libcThe Samba software suite is a collection of programs that implements the
SMB protocol for UNIX systems, allowing you to serve files and printers to
Windows, NT, OS/2 and DOS clients. This protocol is sometimes also referred
to as the LanManager or Netbios protocol.

855kB872kBGPL-3.0Felix FietkauBug reportsSources
networkser2net3.5.1-5libc, librt, libpthreadThis project provides a proxy that allows telnet/tcp connections to be made to
serial ports on a machine.

41kB40kBGPL-2.0-or-laterMichael HeimpoldBug reportsSources
networkhttptunnel3.3-1libchttptunnel creates a bidirectional virtual data path tunnelled in HTTP
requests. The requests can be sent via an HTTP proxy if so desired.

29kB28kBGPL-2.0-onlyToni UhligBug reportsSources
networkltq-adsl-app3.24.4.4-10libc, libpthread, ltq-dsl-base, libubox20220515, libubus20220601Infineon DSL CPE API for Amazon SE, Danube and Vinax.

48kB47kBBSD-3-ClauseJohn CrispinBug reportsSources
networknbd3.19-2libc, kmod-nbdpackages:pkgdata:nbd, This package contains the network block device client.

12kB11kBGPL-2.0-or-laterMarcin Jurkowskipackages:pkgdata:nbd, Bug reportspackages:pkgdata:nbd, Sources
networknbd-server3.19-2libc, librt, libpthread, glib2packages:pkgdata:nbd-server, This package contains the network block device server.

23kB22kBGPL-2.0-or-laterMarcin Jurkowskipackages:pkgdata:nbd-server, Bug reportspackages:pkgdata:nbd-server, Sources
networknbd3.19-2libc, kmod-nbdThis package contains the network block device client.

12kB11kBGPL-2.0-or-laterMarcin JurkowskiBug reportsSources
networknbd-server3.19-2libc, librt, libpthread, glib2This package contains the network block device server.

23kB22kBGPL-2.0-or-laterMarcin JurkowskiBug reportsSources
networkooniprobe3.16.5-1libcThe next generation of OONI(Open Observatory of Network Interference)
Probe Command Line Interface.

94190kB95390kBBSD-3-ClauseJan PavlinecBug reportsSources
networkapcupsd3.14.14-3libc, libpthread, libusb-compat4UPS control software

234kB234kBGPL-2.0Othmar TrunigerBug reportsSources
networkapcupsd-cgi3.14.14-3libc, libpthread, libgdUPS control software CGI module

29kB29kBGPL-2.0Othmar TrunigerBug reportsSources
networkiperf33.11-1libcpackages:pkgdata:iperf3, Iperf is a modern alternative for measuring TCP and UDP bandwidth
performance, allowing the tuning of various parameters and
characteristics.

50kB49kBBSD-3-ClauseFelix Fietkaupackages:pkgdata:iperf3, Bug reportspackages:pkgdata:iperf3, Sources
networkiperf3-ssl3.11-1libc, libopenssl1.1packages:pkgdata:iperf3-ssl, Internet Protocol bandwidth measuring tool with iperf_auth support

53kB53kBBSD-3-ClauseFelix Fietkaupackages:pkgdata:iperf3-ssl, Bug reportspackages:pkgdata:iperf3-ssl, Sources
networkiperf33.11-1libcIperf is a modern alternative for measuring TCP and UDP bandwidth
performance, allowing the tuning of various parameters and
characteristics.

50kB49kBBSD-3-ClauseFelix FietkauBug reportsSources
networkiperf3-ssl3.11-1libc, libopenssl1.1Internet Protocol bandwidth measuring tool with iperf_auth support

53kB53kBBSD-3-ClauseFelix FietkauBug reportsSources
networkdarkstat3.0.719-6libc, libpcap1, zlibpackages:pkgdata:darkstat, darkstat is a packet sniffer that runs as a background process on a cable/DSL
router, gathers all sorts of statistics about network usage, and serves them
over HTTP.

38kB37kBGPL-2.0 BSD-ISCJean-Michel Lacroixpackages:pkgdata:darkstat, Bug reportspackages:pkgdata:darkstat, Sources
networkdarkstat3.0.719-6libc, libpcap1, zlibdarkstat is a packet sniffer that runs as a background process on a cable/DSL
router, gathers all sorts of statistics about network usage, and serves them
over HTTP.

38kB37kBGPL-2.0 BSD-ISCJean-Michel LacroixBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun