Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='network'
| Sınıf | Ad | Versiyon | Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | ↑ Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| network | nut-driver-clone | 2.7.4-27 | libc, nut, nut-server | UPS driver clone | 46kB | 45kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-blazer_ser | 2.7.4-27 | libc, nut, nut-server | Driver for Megatec/Q1 protocol serial based UPS equipment | 28kB | 27kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-bestups | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment | 19kB | 18kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-bestuferrups | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for Best Power Micro-Ferrups | 19kB | 18kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-bestfortress | 2.7.4-27 | libc, nut, nut-server | Driver for old Best Fortress UPS equipment | 23kB | 23kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-bestfcom | 2.7.4-27 | libc, nut, nut-server | Driver for Best Power Fortress/Ferrups | 25kB | 24kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-belkinunv | 2.7.4-27 | libc, nut, nut-server | Driver for Belkin “Universal UPS” and compatible | 22kB | 21kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-belkin | 2.7.4-27 | libc, nut, nut-server | Driver for Belkin serial UPS equipment | 24kB | 23kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-bcmxcp | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for UPSes supporting the serial BCM/XCP protocol | 31kB | 30kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-apcupsd-ups | 2.7.4-27 | libc, nut, nut-server | Driver for apcupsd client access | 18kB | 17kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-apcsmart-old | 2.7.4-27 | libc, nut, nut-server | Driver for American Power Conversion Smart Protocol UPS equipment | 29kB | 28kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-al175 | 2.7.4-27 | libc, nut, nut-server | Driver for Eltek UPS models with AL175 alarm module | 25kB | 24kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | miredo | 1.2.6-3 | libc, librt, libpthread, kmod-tun | Miredo is an open-source Teredo IPv6 tunneling software, for Linux and the BSD operating systems. It includes functional implementations of all components of the Teredo specification (client, relay and server). It is meant to provide IPv6 connectivity even from behind NAT devices. | 35kB | 34kB | GPL-2.0-or-later | common packages maintainers | Bug reports | Sources |
| network | nut-driver-optiups | 2.7.4-27 | libc, nut, nut-server | Driver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment | 24kB | 23kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-apcsmart | 2.7.4-27 | libc, nut, nut-server | Driver for American Power Conversion Smart Protocol UPS equipment | 33kB | 33kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | samba4-server | 4.18.8-1 | libc, samba4-libs | installs: smbd (nmbd) smbpasswd pdbedit testparm (nmblookup) (smbcacls sharesec) (samba samba-tool ntlm_auth samba-gpupdate samba_dnsupdate samba_kcc samba_spnupdate samba_upgradedns samba_downgrade_db) This provides the basic fileserver service and is the minimum needed to serve file shares. HINT: https://fitzcarraldoblog.wordpress.com/2016/10/17/a-correct-method-of-configuring-samba-for-browsing-smb-shares-in-a-home-network/ | 243kB | 242kB | GPL-3.0-only | common packages maintainers | Bug reports | Sources |
| network | samba4-admin | 4.18.8-1 | libc, librt, libpthread, samba4-libs | installs: net smbcontrol profiles rpcclient dbwrap_tool eventlogadm ldbadd ldbdel ldbedit ldbmodify ldbrename ldbsearch tdbbackup tdbdump tdbrestore tdbtool Administration tools collection | 842kB | 847kB | GPL-3.0-only | common packages maintainers | Bug reports | Sources |
| network | foolsm | 1.0.13-2 | libc, msmtp | foolsm is a link state monitor for carrying out actions when a link transistions from the up to down state or vice versa. | 30kB | 29kB | GPL-2.0-only | common packages maintainers | Bug reports | Sources |
| network | sctp-tools | 1.0.19-1 | libc, libsctp | SCTP user-land tools | 33kB | 33kB | GPL-2.0 | common packages maintainers | Bug reports | Sources |
| network | pen | 0.34.1-3 | libc, libopenssl1.1 | This is pen, a load balancer for “simple” TCP based protocols such as HTTP or SMTP. It allows several servers to appear as one to the outside and automatically detects servers that are down and distributes clients among the available servers. This gives high availability and scalable performance. | 52kB | 51kB | GPL-2.0-or-later | common packages maintainers | Bug reports | Sources |
| network | nut | 2.7.4-27 | libc | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. | 0kB | 0kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-web-cgi | 2.7.4-27 | libc, librt, libpthread, nut, nut-common, libgd | The CGI programs are clients that run through your web server. They allow you to see UPS status and perform certain administrative commands from any web browser. Javascript and cookies are not required. | 42kB | 41kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-upssched | 2.7.4-27 | libc, nut, nut-common, nut-upsmon | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upssched was created to allow users to execute programs at times relative to events being monitored by upsmon. The original purpose was to allow for a shutdown to occur after some fixed period on battery, but there are other uses that are possible. You can alternatively write your own script and save some space. | 14kB | 13kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-upsrw | 2.7.4-27 | libc, librt, libpthread, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsrw allows you to view and change the read/write variables inside your UPS. It sends commands via the upsd to your driver, which configures the hardware for you. The list of variables that allow you to change their values is based on the capabilities of your UPS equipment. Not all models support this feature. Typically, cheaper hardware does not support any of them. | 11kB | 10kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-upsmon | 2.7.4-27 | libc, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsmon is the client process that is responsible for the most important part of UPS monitoring--shutting down the system when the power goes out. It can call out to other helper programs for notification purposes during power events. upsmon can monitor multiple systems using a single process. Every UPS that is defined in the upsmon.conf configuration file is assigned a power value and a type (slave or master). | 21kB | 20kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-upsmon-sendmail-notify | 2.7.4-27 | libc, nut, nut-upsmon | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsmon with default notification via sendmail | 1kB | 0kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-upslog | 2.7.4-27 | libc, librt, libpthread, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upslog is a daemon that will poll a UPS at periodic intervals, fetch the variables that interest you, format them, and write them to a file. | 10kB | 9kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-upscmd | 2.7.4-27 | libc, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upscmd allows you to invoke “instant commands” in your UPS hardware. Not all hardware supports this, so check the list with -l to see if anything will work on your equipment. On hardware that supports it, you can use this program to start and stop battery tests, invoke a front panel test (beep!), turn the load on or off, and more. | 9kB | 8kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-upsc | 2.7.4-27 | libc, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsc is provided as a quick way to poll the status of a UPS server. It can be used inside shell scripts and other programs that need UPS data but do not want to include the full interface. | 8kB | 7kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-server | 2.7.4-27 | libc, nut, nut-common | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsd is responsible for serving the data from the drivers to the clients. It connects to each driver and maintains a local cache of the current state. Queries from the clients are served from this cache, so delays are minimal. This program is essential, and must be running at all times to actually make any use out of the drivers and clients. | 47kB | 46kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-usbhid-ups | 2.7.4-27 | libc, nut, nut-server | Driver for USB/HID UPS equipment | 54kB | 53kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-tripplite_usb | 2.7.4-27 | libc, nut, nut-server | Driver for older Tripp Lite USB UPSes (not PDC HID) | 29kB | 28kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-riello_usb | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for Riello UPS Protocol UPS equipment via USB | 26kB | 25kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-richcomm_usb | 2.7.4-27 | libc, nut, nut-server | Driver for UPS equipment using Richcomm dry-contact to USB solution | 22kB | 21kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-nutdrv_qx | 2.7.4-27 | libc, nut, nut-server | Driver for Q* protocol serial and USB based UPS equipment | 64kB | 65kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-nutdrv_atcl_usb | 2.7.4-27 | libc, librt, libpthread, nut, nut-server | Driver for ATCL FOR UPS equipment | 18kB | 17kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-blazer_usb | 2.7.4-27 | libc, nut, nut-server | Driver for Megatec/Q1 protocol USB based UPS equipment | 28kB | 27kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-driver-bcmxcp_usb | 2.7.4-27 | libc, nut, nut-server | Experimental driver for UPSes supporting the BCM/XCP protocol over USB | 37kB | 36kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-common | 2.7.4-27 | libc, librt, libpthread, nut, libusb-compat4, libneon | Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. This package contains the common files. | 15kB | 14kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | nut-avahi-service | 2.7.4-27 | libc, librt, libpthread, nut, avahi-daemon | This package contains the service definition for announcing the attached UPS via mDNS/DNS-SD. | 1kB | 0kB | GPL-2.0-or-later GPL-3.0-or-later GPL-1.0-or-later Artistic-1.0-Perl | common packages maintainers | Bug reports | Sources |
| network | jool-tools | 4.1.5-1 | libc, libnl200, libxtables12 | Jool is an Open Source SIIT and NAT64 for Linux. This package provides the userspace control programs for Jool. | 122kB | 121kB | GPL-2.0-only | common packages maintainers | Bug reports | Sources |
| network | iptraf-ng | 1.1.4-1 | libc, libncurses6 | iptraf-ng is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. | 71kB | 70kB | GPL-2.0 | common packages maintainers | Bug reports | Sources |
| network | cifsmount | 6.11-2 | libc, kmod-fs-cifs | CIFS mount | 13kB | 12kB | GPL-3.0-or-later | common packages maintainers | Bug reports | Sources |
| network | pppossh | 2 | libc, librt, libpthread, ppp, resolveip | This package adds protocol support for PPP over SSH. The protocol name is 'pppossh' as in netifd interface config option 'proto'. | 1kB | 0kB | GPLv2 | Yousong Zhou | Bug reports | Sources |
| network | smartsnmpd | 2014-08-13-fb93473d89..98d | libc, libssp, lua, liblua, libubox, libuci-lua, libubus-lua | smartsnmpd is an implementation of SNMP Agent. Its goal is “Easily writing boring SNMP MIB with Lua”. This package add native support for OpenWrt. Include using ubus and uci to get system info/status. And, it use libubox/uloop as low level event-driven library. | 19kB | 18kB | GPL-2.0 | Xiongfei Guo | Bug reports | Sources |
| network | scapy | 2.4.5-1 | libc, librt, libpthread, python3 | packages:pkgdata:scapy, Scapy is a powerful interactive packet manipulation program built on top of the Python interpreter. It can be used to forge or decode packets of a wide number of protocols, send them over the wire, capture them, match requests and replies, and much more. | 1631kB | 1645kB | GPL-2.0-only | W. Michael Petullo | packages:pkgdata:scapy, Bug reports | packages:pkgdata:scapy, Sources |
| network | nfdump | 1.6.24-1 | libc, libbz2-1.0, musl-fts | packages:pkgdata:nfdump, NetFlow collecting and processing tools | 179kB | 179kB | BSD-3-Clause | W. Michael Petullo | packages:pkgdata:nfdump, Bug reports | packages:pkgdata:nfdump, Sources |
| network | dmapd | 0.0.86-1 | libc, libdmapsharing, libdb47, vips, libgst1pbutils | packages:pkgdata:dmapd, Dmapd is a DMAP server | 49kB | 48kB | GPL-2.0-or-later | W. Michael Petullo | packages:pkgdata:dmapd, Bug reports | packages:pkgdata:dmapd, Sources |
| network | scapy-src | 2.4.5-1 | libc | Scapy is a powerful interactive packet manipulation program built on top of the Python interpreter. It can be used to forge or decode packets of a wide number of protocols, send them over the wire, capture them, match requests and replies, and much more. This package contains the Python source files for scapy. | 1059kB | 1070kB | GPL-2.0-only | W. Michael Petullo | Bug reports | Sources |
| network | nfdump | 1.6.24-1 | libc, libbz2-1.0, musl-fts | NetFlow collecting and processing tools | 179kB | 179kB | BSD-3-Clause | W. Michael Petullo | Bug reports | Sources |
| Previous page Next page | ||||||||||